ABSTRACT
Two-dimensional (2D) van der Waals heterostructures combine the distinct properties of individual 2D materials, resulting in metamaterials, ideal for emergent electronic, optoelectronic, and spintronic phenomena. A significant challenge in harnessing these properties for future hybrid circuits is their large-scale realization and integration into graphene interconnects. In this work, we demonstrate the direct growth of molybdenum disulfide (MoS2) crystals on patterned graphene channels. By enhancing control over vapor transport through a confined space chemical vapor deposition growth technique, we achieve the preferential deposition of monolayer MoS2 crystals on monolayer graphene. Atomic resolution scanning transmission electron microscopy reveals the high structural integrity of the heterostructures. Through in-depth spectroscopic characterization, we unveil charge transfer in Graphene/MoS2, with MoS2 introducing p-type doping to graphene, as confirmed by our electrical measurements. Photoconductivity characterization shows that photoactive regions can be locally created in graphene channels covered by MoS2 layers. Time-resolved ultrafast transient absorption (TA) spectroscopy reveals accelerated charge decay kinetics in Graphene/MoS2 heterostructures compared to standalone MoS2 and upconversion for below band gap excitation conditions. Our proof-of-concept results pave the way for the direct growth of van der Waals heterostructure circuits with significant implications for ultrafast photoactive nanoelectronics and optospintronic applications.
ABSTRACT
Al4SiC4 is a ternary wide-band-gap semiconductor with a high strength-to-weight ratio and excellent oxidation resistance. It consists of slabs of Al4C3 separated by SiC layers with the space group of P63mc. The space group allows Si to occupy two different 2a Wykoff sites, with previous studies reporting that Si occupies only one of the two sites, giving it an ordered structure. Another hitherto unexplored possibility is that Si can be randomly distributed on both 2a sites. In this work, we revisit the published ordered crystal structure using experimental methods and density functional theory (DFT). Al4SiC4 was synthesized by high-temperature sintering at 1800 °C from a powder mixture of Al4C3 and SiC. Neutron diffraction confirmed that Al4SiC4 crystallized with the space group of P63mc, with diffraction patterns that could be fitted to both the ordered and the disordered structures. Scanning transmission electron microscopy, however, provided clear evidence supporting the latter, with DFT calculations further confirming that it is 0.16 eV lower in energy per Al4SiC4 formula unit than the former. TEM analysis revealed Al vacancies in some of the atomic layers that can introduce p-type doping and direct band gaps of 0.7 and 1.2 eV, agreeing with our optical measurements. Finally, we propose that although the calculated formation energy of the Al vacancies is high, the vacancies are stabilized by entropy effects at the high synthesis temperature. This indicates that the cooling procedure after high-temperature synthesis can be important in determining the vacancy content and the electronic properties of Al4SiC4.
ABSTRACT
Competitive surface adsorption energies on catalytic surfaces constitute a fundamental aspect of modeling electrochemical reactions in aqueous environments. The conventional approach to this task relies on applying density functional theory, albeit with computationally intensive demands, particularly when dealing with intricate surfaces. In this study, we present a methodological exposition of quantifying competitive relationships within complex systems. Our methodology leverages quantum-mechanical-guided deep neural networks, deployed in the investigation of quinary high-entropy alloys composed of Mo-Cr-Mn-Fe-Co-Ni-Cu-Zn. These alloys are under examination as prospective electrocatalysts, facilitating the electrochemical synthesis of ammonia in aqueous media. Even in the most favorable scenario for nitrogen fixation identified in this study, at the transition from O and OH coverage to surface hydrogenation, the probability of N2 coverage remains low. This underscores the fact that catalyst optimization alone is insufficient for achieving efficient nitrogen reduction. In particular, these insights illuminate that system consideration with oxygen- and hydrogen-repelling approaches or high-pressure solutions would be necessary for improved nitrogen reduction within an aqueous environment.
ABSTRACT
When electrocatalysts are prepared, modification of the morphology is a common strategy to enhance their electrocatalytic performance. In this work, we have examined and characterized nanorods (3D) and nanosheets (2D) of nickel molybdate hydrates, which previously have been treated as the same material with just a variation in morphology. We thoroughly investigated the materials and report that they contain fundamentally different compounds with different crystal structures, chemical compositions, and chemical stabilities. The 3D nanorod structure exhibits the chemical formula NiMoO4·0.6H2O and crystallizes in a triclinic system, whereas the 2D nanosheet structures can be rationalized with Ni3MoO5-0.5x(OH)x·(2.3 - 0.5x)H2O, with a mixed valence of both Ni and Mo, which enables a layered crystal structure. The difference in structure and composition is supported by X-ray photoelectron spectroscopy, ion beam analysis, thermogravimetric analysis, X-ray diffraction, electron diffraction, infrared spectroscopy, Raman spectroscopy, and magnetic measurements. The previously proposed crystal structure for the nickel molybdate hydrate nanorods from the literature needs to be reconsidered and is here refined by ab initio molecular dynamics on a quantum mechanical level using density functional theory calculations to reproduce the experimental findings. Because the material is frequently studied as an electrocatalyst or catalyst precursor and both structures can appear in the same synthesis, a clear distinction between the two compounds is necessary to assess the underlying structure-to-function relationship and targeted electrocatalytic properties.
ABSTRACT
Micro-Raman spectroscopy is an important analytical tool in a large variety of science disciplines. The technique is suitable for both identification of chemical bonds and studying more detailed phenomena like molecular interactions, material strain, crystallinity, defects, and bond formations. Raman scattering has one major weakness however: it is a very low probability process. The weak signals require very sensitive detection systems, which leads to a high probability of picking up signals from origins other than the sample. This complicates the analysis of the results and increases the risk of misinterpreting data. This work provides an overview of the sources of spurious signals occurring in Raman spectra, including photoluminescence, cosmic rays, stray light, artefacts caused by spectrometer components, and signals from other compounds in or surrounding the sample. The origins of these false Raman peaks are explained and means to identify and counteract them are provided.
ABSTRACT
Two coordination complexes have been made by combining the dithiolene complexes [M(mnt)2]2- (mnt = maleonitriledithiolate; M = Ni2+ or Cu2+) as anion, with the copper(II) coordination complex [Cu(Stetra)] (Stetra = 6,6'-bis(4,5-dihydrothiazol-2-yl)-2,2'-bipyri-dine) as cation. The variation of the metal centers leads to a dramatic change in the conductivity of the materials, with the M = Cu2+ variant (Cu-Cu) displaying semiconductor behavior with a conductivity of approximately 2.5 × 10-8 S cm-1, while the M = Ni2+ variant (Ni-Cu) displayed no observable conductivity. Computational studies found Cu-Cu enables a minimization of reorganization energy losses and, as a result, a lower barrier to the charge transfer process, resulting in the reported higher conductivity.
ABSTRACT
Structural characterization of transient electrochemical species in the sub-millisecond time scale is the all-time wish of any electrochemist. Presently, common time resolution of structural spectro-electrochemical methods is about 0.1 seconds. Herein, a transient spectro-electrochemical Raman setup of easy implementation is described which allows sub-ms time resolution. The technique studies electrochemical processes by initiating the reaction with an electric potential (or current) pulse and analyses the product with a synchronized laser pulse of the modified Raman spectrometer. The approach was validated by studying a known redox driven isomerization of a Ru-based molecular switch grafted, as monolayer, on a SERS active Au microelectrode. Density-functional-theory calculations confirmed the spectral assignments to sub-ms transient species. This study paves the way to a new generation of time-resolved spectro-electrochemical techniques which will be of fundamental help in the development of next generation electrolizers, fuel cells and batteries.
ABSTRACT
Mixed-cation perovskite materials have shown great potential for sunlight harvesting and have surpassed unmixed perovskite materials in solar cell efficiency and stability. The role of mixed monovalent cations in the enhanced optoelectronic properties and excited state response, however, are still elusive from a theoretical perspective. Herein, through time dependent density functional theory calculations of mixed cation perovskites, we report the electronic structure of Cs formamidinium (FA) mixed cationic lead iodide (Cs0.17FA0.87PbI3) in comparison to the corresponding single monovalent cation hybrid perovskite. The results show that the Cs0.17FA0.87PbI3 and FAPbI3 had negligible differences in the optical band gap, and partial and total density of states in comparison to a single cation perovskite, while the effective mass of carriers, the local atomic density of states, the directional transport, and the structural distortions were significantly different. A lattice-distortion-induced asymmetry in the ground-state charge density is found, and originates from the co-location of caesium atoms in the lattice and signifies the effect on the charge density upon cation mixing and corresponding symmetry breaking. The excited-state charge response and induced polarizabilities are quantified, and discussed in terms of their importance for effective light absorption, charge separation, and final solar cell performance. We also quantify the impact of such polarizabilities on the dynamics of the structure of the perovskites and the implications this has for hot carrier cooling. The results shed light on the mechanism and origin of the enhanced performance in mixed-cation perovskite-based devices and their merits in comparison to single cation perovskites.
ABSTRACT
In an effort to support the large-scale implementation of clean hydrogen in industry and society, the electrolytic decomposition of water is considered a realistically enticing prospect, provided the guarantee of affordable and durable material components. Within alkaline systems, earth-abundant electrocatalysts could provide both these requirements. However, a continued exploration of the reactivity and the causes behind different behaviors in performance are necessary to guide optimization and design. In this paper, Ta-doped NiO thin films are prepared via DC magnetron sputtering (1-2-4 at % Ta) to demonstrate the effect of surface electronic modulation by non-3d elements on the catalysis of the oxygen evolution reaction (OER). Material properties of the catalysts are analyzed via Rutherford backscattering spectrometry, X-ray diffractometry, photoelectron spectroscopy, and Raman spectroscopy. Ta impurities are shown to be directly responsible for increasing the valence state of Ni sites and enhancing reaction kinetics, resulting in performance improvements of up to 64 mV at 10 mA cm-2 relative to pristine NiO. Particularly, we show that by applying operando Raman spectroscopy, Ta enhances the ability to create high-valence Ni in γ-NiOOH at a lower overpotential compared to the undoped sample. The lowered overpotentials of the OER can thus be attributed to the energetically less hindered advent of the creation of γ-NiOOH species on the pre-catalyst surface: a phenomenon otherwise unresolved through simple voltammetry.
ABSTRACT
In photochemical production of hydrogen from water, the hole-mediated oxidation reaction is the rate-determining step. A poor solar-to-hydrogen efficiency is usually related to a mismatch between the internal quantum efficiency of photon-induced hole generation and the apparent quantum yield of hydrogen. This waste of photogenerated holes is unwanted yet unavoidable. Although great progress has been made, we are still far away from the required level of dexterity to deal with the associated challenges of wasted holes and its consequential chemical effects that have placed one of the greatest bottlenecks in attaining high solar-to-hydrogen efficiency. A critical assessment of the hole and its related phenomena in solar hydrogen production would, therefore, pave the way moving forward. In this regard, we focus on the contextual and conceptual understanding of the dynamics and kinetics of photogenerated holes and its critical role in driving redox reactions, with the objective of guiding future research. The main reasons behind and consequences of unused holes are examined and different approaches to improve overall efficiency are outlined. We also highlight yet unsolved research questions related to holes in solar fuel production.
ABSTRACT
The ability to control electronic states by utilizing quantum confinement of one of the material components in heterojunctions is a promising approach to perform energy-level matching. In this work, we report the possibility to achieve optimum energy alignment in heterojunctions made from size-controlled quantum dots (Q-dots) of ZnO in combination with three copper oxides: Cu2O, Cu4O3, and CuO. Quantum confinement effects on the ZnO nanoparticles in the diameter range 2.6-7.4 nm showed that the direct optical band gap decreased from 3.99 to 3.41 eV, with a dominating shift occurring in the conduction band (CB) edge, and thus the possibility to obtain close to 0.6 eV CB edge shift by controlling the size of ZnO. The effect was utilized to align the electronic bands in the ZnO Q-dot/copper oxide heterojunctions to allow for charge transfer between the materials and to test the ability to improve the photocatalytic performance for the system, evaluated by the transformation of a dye molecule in water. The catalyst materials were investigated by X-ray diffraction, scanning electron microscopy, ultraviolet-visible (UV-vis), photoluminescence, and Raman spectroscopy. The most promising material combination was found to be the Cu2O copper oxide in combination with an energy aligned ZnO Q-dot system with approximately 7 nm diameter, showing strong synergy effects in good agreement with the energy-level analysis, outperforming the added effect of its individual components, ZnO-Q-dots and Cu2O, by about 140%. The results show that utilization of a heterojunction with controllable energy alignment can provide a drastically improved photocatalytic performance. Apart from increased photocatalytic activity, specific surface states of ZnO are quenched when the heterojunction is created. It is anticipated that the same approach can be utilized in several material combinations with the added benefit of a system with controllable overpotential and thus added specificity for the targeted reduction reaction.
ABSTRACT
The proliferation of the internet of things (IoT) and other low-power devices demands the development of energy harvesting solutions to alleviate IoT hardware dependence on single-use batteries, making their deployment more sustainable. The propagation of energy harvesting solutions is strongly associated with technical performance, cost and aesthetics, with the latter often being the driver of adoption. The general abundance of light in the vicinity of IoT devices under their main operation window enables the use of indoor and outdoor photovoltaics as energy harvesters. From those, highly transparent solar cells allow an increased possibility to place a sustainable power source close to the sensors without significant visual appearance. Herein, we report the effect of hole transport layer Li-TFSI dopant content on semi-transparent, direct plasmonic solar cells (DPSC) with a transparency of more than 80% in the 450-800 nm region. The findings revealed that the amount of oxidized spiro-OMeTAD (spiro+TFSI-) significantly modulates the transparency, effective conductance and conditions of device performance, with an optimal performance reached at around 33% relative concentration of Li-TFSI concerning spiro-OMeTAD. The Li-TFSI content did not affect the immediate charge extraction, as revealed by an analysis of electron-phonon lifetime. Hot electrons and holes were injected into the respective layers within 150 fs, suggesting simultaneous injection, as supported by the absence of hysteresis in the I-V curves. The spiro-OMeTAD layer reduces the Au nanoparticles' reflection/backscattering, which improves the overall cell transparency. The results show that the system can be made highly transparent by precise tuning of the doping level of the spiro-OMeTAD layer with retained plasmonics, large optical cross-sections and the ultrathin nature of the devices.
ABSTRACT
A molecular precursor approach to titania (anatase) nanopowders modified with different amounts of rare-earth elements (REEs: Eu, Sm, and Y) was developed using the interaction of REE nitrates with titanium alkoxides by a two-step solvothermal-combustion method. The nature of an emerging intermetallic intermediate was revealed unexpectedly for the applied conditions via a single-crystal study of the isolated bimetallic isopropoxide nitrate complex [Ti2Y(iPrO)9(NO3)2], a nonoxo-substituted compound. Powders of the final reaction products were characterized by powder X-ray diffraction, scanning electron microscopy-energy-dispersive spectroscopy, Fourier transform infrared, X-ray photoelectron spectroscopy, Raman spectroscopy, and photoluminescence (PL). The addition of REEs stabilized the anatase phase up to ca. 700 °C before phase transformation into rutile became evident. The photocatalytic activity of titania modified with Eu3+ and Sm3+ was compared with that of Degussa P25 titania as the control. PL studies indicated the incorporation of Eu and Sm cations into titania (anatase) at lower annealing temperatures (500 °C), but an exclusion to the surface occurred when the annealing temperature was increased to 700 °C. The efficiency of the modified titania was inferior to the control titania while illuminated within narrow wavelength intervals (445-465 and 510-530 nm), but when subjected to a wide range of visible radiation, the Eu3+- and Sm3+-modified titania outperformed the control, which was attributed both to doping of the band structure of TiO2 with additional energy levels and to the surface chemistry of the REE-modified titania.
ABSTRACT
Water electrolysis powered by renewable energies is a promising technology to produce sustainable fossil free fuels. The development and evaluation of effective catalysts are here imperative; however, due to the inclusion of elements with different redox properties and reactivity, these materials undergo dynamical changes and phase transformations during the reaction conditions. NiMoO4 is currently investigated among other metal oxides as a promising noble metal free catalyst for the oxygen evolution reaction. Here we show that at applied bias, NiMoO4·H2O transforms into γ-NiOOH. Time resolved operando Raman spectroscopy is utilized to follow the potential dependent phase transformation and is collaborated with elemental analysis of the electrolyte, confirming that molybdenum leaches out from the as-synthesized NiMoO4·H2O. Molybdenum leaching increases the surface coverage of exposed nickel sites, and this in combination with the formation of γ-NiOOH enlarges the amount of active sites of the catalyst, leading to high current densities. Additionally, we discovered different NiMoO4 nanostructures, nanoflowers, and nanorods, for which the relative ratio can be influenced by the heating ramp during the synthesis. With selective molybdenum etching we were able to assign the varying X-ray diffraction (XRD) pattern as well as Raman vibrations unambiguously to the two nanostructures, which were revealed to exhibit different stabilities in alkaline media by time-resolved in situ and operando Raman spectroscopy. We advocate that a similar approach can beneficially be applied to many other catalysts, unveiling their structural integrity, characterize the dynamic surface reformulation, and resolve any ambiguities in interpretations of the active catalyst phase.
ABSTRACT
Interaction of surface adsorbate vibration and intraband electron absorption in nanocrystals has been reported to affect the photophysical properties of both nanocrystals and surface adsorbates and may affect the performance of hybrid photocatalysts composed of semiconductor nanocrystals and molecular catalysts. Here, by combining ultrafast transient visible and IR spectroscopic measurements, we report the observation of Fano resonances between the intraband transition of the photogenerated electrons in CdS and CdSe nanocrystals and CO stretching vibrational modes of adsorbed molecular catalysts, [Fe2(cbdt)(CO)6] (FeFe; cbdt = 1-carboxyl-benzene-2,3-dithiolate), a molecular mimic for the active site of FeFe-hydrogenase. The occurrence of Fano resonances is independent of nanocrystal types (rods vs dots) or charge transfer character between the nanocrystal and FeFe, and is likely a general feature of nanocrystal and molecular catalyst hybrid systems. These results provide new insights into the fundamental interactions in these hybrid assemblies for artificial photosynthesis.
Subject(s)
Nanoparticles , Quantum Dots , Catalysis , Electrons , VibrationABSTRACT
In this work, a trimetallic NiMoV catalyst is developed for the hydrogen evolution reaction and characterized with respect to structure, valence, and elemental distribution. The overpotential to drive a 10 mA cm-2 current density is lowered from 94 to 78 mV versus reversible hydrogen electrode by introducing V into NiMo. A scalable stand-alone system for solar-driven water splitting was examined for a laboratory-scale device with 1.6 cm2 photovoltaic (PV) module area to an up-scaled device with 100 cm2 area. The NiMoV cathodic catalyst is combined with a NiO anode in alkaline electrolyzer unit thermally connected to synthesized (Ag,Cu) (In,Ga)Se2 ((A)CIGS) PV modules. Performance of 3- and 4-cell interconnected PV modules, electrolyzer, and hydrogen production of the PV electrolyzer are examined between 25°C and 50°C. The PV-electrolysis device having a 4-cell (A)CIGS under 100 mW cm-2 illumination and NiMoV-NiO electrolyzer shows 9.1% maximum and 8.5% averaged efficiency for 100 h operation.
ABSTRACT
Tuning the local environment of nanomaterial-based catalysts has emerged as an effective approach to optimize their oxygen evolution reaction (OER) performance, yet the controlled electronic modulation around surface active sites remains a great challenge. Herein, directed electronic modulation of NiO nanoparticles was achieved by simple surface molecular modification with small organic molecules. By adjusting the electronic properties of modifying molecules, the local electronic structure was rationally tailored and a close electronic structure-activity relationship was discovered: the increasing electron-withdrawing modification readily decreased the electron density around surface Ni sites, accelerating the reaction kinetics and improving OER activity, and vice versa. Detailed investigation by operando Raman spectroelectrochemistry revealed that the electron-withdrawing modification facilitates the charge-transfer kinetics, stimulates the catalyst reconstruction, and promotes abundant high-valent γ-NiOOH reactive species generation. The NiO-C6 F5 catalyst, with the optimized electronic environment, exhibited superior performance towards water oxidation. This work provides a well-designed and effective approach for heterogeneous catalyst fabrication under the molecular level.
ABSTRACT
A damping-like spin-orbit torque (SOT) is a prerequisite for ultralow-power spin logic devices. Here, we report on the damping-like SOT in just one monolayer of the conducting transition-metal dichalcogenide (TMD) TaS2 interfaced with a NiFe (Py) ferromagnetic layer. The charge-spin conversion efficiency is found to be 0.25 ± 0.03 in TaS2(0.88)/Py(7), and the spin Hall conductivity (14.9×105â2eΩ-1m-1) is found to be superior to values reported for other TMDs. We also observed sizable field-like torque in this heterostructure. The origin of this large damping-like SOT can be found in the interfacial properties of the TaS2/Py heterostructure, and the experimental findings are complemented by the results from density functional theory calculations. It is envisioned that the interplay between interfacial spin-orbit coupling and crystal symmetry yielding large damping-like SOT. The dominance of damping-like torque demonstrated in our study provides a promising path for designing the next-generation conducting TMD-based low-powered quantum memory devices.
ABSTRACT
Plasmonics nanoparticles gained prominence in the last decade in fields of photonics, solar energy conversion and catalysis. It has been shown that anchoring the plasmonics nanoparticles on semiconductors via a molecular linker reduces band bending and increases hot carriers' lifetime, which is essential for the development of efficient photovoltaic devices and photocatalytic systems. Aminobenzoic acid is a commonly used linker to connect the plasmonic metal to an oxide-based semiconductor. The coordination to the oxide was established to occur via the carboxylic functional group, however, it remains unclear what type of coordination that is established with the metal site. Herein, it is demonstrated that metal is covalently bonded to the linker via the amino group, as supported by Surface-Enhanced Resonant Raman and infrared spectroscopies. The covalent linkage increases significantly the amount of silver grafted, resulting in an improvement of the system catalytic proficiency in the 4-nitrophenol (4-NP) photoreduction.