Precursor-Engineered Volatile Inks Enable Reliable Blade-Coating of Cesium-Formamidinium Perovskites Toward Fully Printed Solar Modules.

Reliable fabrication of large-area perovskite films with antisolvent-free printing techniques requires high-volatility solvents, such as 2-methoxyethanol (2ME), to formulate precursor inks. However, the fabrication of high-quality cesium-formamidinium (Cs-FA) perovskites has been hampered using volatile solvents due to their poor coordination with the perovskite precursors. Here, this issue is resolved by re-formulating a 2ME-based Cs0.05FA0.95PbI3 ink using pre-synthesized single crystals as the precursor instead of the conventional mixture of raw powders. The key to obtaining high-quality Cs-FA films lies in the removal of colloidal particles from the ink and hence the suppression of colloid-induced heterogeneous nucleation, which kinetically facilitates the growth of as-formed crystals toward larger grains and improved film crystallinity. Employing the precursor-engineered volatile ink in the vacuum-free, fully printing processing of solar cells (with carbon electrode), a power conversion efficiency (PCE) of 19.3%, a T80 (80% of initial PCE) of 1000 h in ISOS-L-2I (85 °C/1 Sun) aging test and a substantially reduced bill of materials are obtained. The reliable coating methodology ultimately enables the fabrication of carbon-electrode mini solar modules with a stabilized PCE of 16.2% (average 15.6%) representing the record value among the fully printed counterparts and a key milestone toward meeting the objectives for a scalable photovoltaic technology.

Semitransparent Organic Photovoltaic Devices: Interface/Bulk Properties and Stability Issues.

In the present work, an insight on the morpho/structural properties of semitransparent organic devices for buildings' integrated photovoltaics is presented, and issues related to interface and bulk stability are addressed. The organic photovoltaic (OPV) cells under investigation are characterized by a blend of PM6:Y6 as a photo-active layer, a ZnO ETL (electron transporting layer), a HTL (hole transporting layer) of HTL-X and a transparent electrode composed by Ag nanowires (AgNWs). The devices' active nanomaterials, processed as thin films, and their mutual nanoscale interfaces are investigated by a combination of in situ Energy Dispersive X-ray Reflectometry (EDXR) and ex situ Atomic Force Microscopy (AFM), X-ray Diffraction (XRD) and micro-Raman spectroscopy. In order to discriminate among diverse concomitant aging pathways potentially occurring upon working conditions, the effects of different stress factors were investigated: light and temperature. Evidence is gained of an essential structural stability, although an increased roughness at the ZnO/PM6:Y6 interface is deduced by EDXR measurements. On the contrary, an overall stability of the system subjected to thermal stress in the dark was observed, which is a clear indication of the photo-induced origin of the observed degradation phenomenon. Micro-Raman spectroscopy brings light on the origin of such effect, evidencing a photo-oxidation process of the active material in the device, using hygroscopic organic HTL, during continuous illumination in ambient moisture conditions. The process may be also triggered by a photocatalytic role of the ZnO layer. Therefore, an alternative configuration is proposed, where the hygroscopic HTL-X is replaced by the inorganic compound MoOx. The results show that such alternative configuration is stable under light stress (solar simulator), suggesting that the use of Molybdenum Oxide, limiting the photo-oxidation of the bulk PM6:Y6 active material, can prevent the cell from degradation.

Volatile Perovskite Precursor Ink Enables Window Printing of Phase-Pure FAPbI3 Perovskite Solar Cells and Modules in Ambient Atmosphere.

Despite the great success of perovskite photovoltaics in terms of device efficiency and stability using laboratory-scale spin-coating methods, the demand for high-throughput and cost-effective solutions remains unresolved and rarely reported because of the complicated nature of perovskite crystallization. In this work, we propose a stable precursor ink design strategy to control the solvent volatilization and perovskite crystallization to enable the wide speed window printing (0.3 to 18.0 m/min) of phase-pure FAPbI3 perovskite solar cells (pero-SCs) in ambient atmosphere. The FAPbI3 perovskite precursor ink uses volatile acetonitrile (ACN) as the main solvent with DMF and DMSO as coordination additives is beneficial to improve the ink stability, inhibit the coffee rings, and the complicated intermediate FAPbI3 phases, delivering high-quality pin-hole free and phase-pure FAPbI3 perovskite films with large-scale uniformity. Ultimately, small-area FAPbI3 pero-SCs (0.062 cm2 ) and large-area modules (15.64 cm2 ) achieved remarkable efficiencies of 24.32 % and 21.90 %, respectively, whereas the PCE of the devices can be maintained at 23.76 % when the printing speed increases to 18.0 m/min. Specifically, the unencapsulated device exhibits superior operational stability with T90 >1350 h. This work represents a step towards the scalable, cost-effective manufacturing of perovskite photovoltaics with both high performance and high throughput.

Renewed Prospects for Organic Photovoltaics.

Organic photovoltaics (OPVs) have progressed steadily through three stages of photoactive materials development: (i) use of poly(3-hexylthiophene) and fullerene-based acceptors (FAs) for optimizing bulk heterojunctions; (ii) development of new donors to better match with FAs; (iii) development of non-fullerene acceptors (NFAs). The development and application of NFAs with an A-D-A configuration (where A = acceptor and D = donor) has enabled devices to have efficient charge generation and small energy losses (Eloss < 0.6 eV), resulting in substantially higher power conversion efficiencies (PCEs) than FA-based devices. The discovery of Y6-type acceptors (Y6 = 2,2'-((2Z,2'Z)-((12,13-bis(2-ethylhexyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]-thiadiazolo[3,4-e]-thieno[2″,3″:4',5']thieno-[2',3':4,5]pyrrolo-[3,2-g]thieno-[2',3':4,5]thieno-[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile) with an A-DA' D-A configuration has further propelled the PCEs to go beyond 15% due to smaller Eloss values (∼0.5 eV) and higher external quantum efficiencies. Subsequently, the PCEs of Y6-series single-junction devices have increased to >19% and may soon approach 20%. This review provides an update of recent progress of OPV in the following aspects: developments of novel NFAs and donors, understanding of the structure-property relationships and underlying mechanisms of state-of-the-art OPVs, and tasks underpinning the commercialization of OPVs, such as device stability, module development, potential applications, and high-throughput manufacturing. Finally, an outlook and prospects section summarizes the remaining challenges for the further development of OPV technology.

Phase-Field Simulation of Liquid-Vapor Equilibrium and Evaporation of Fluid Mixtures.

In solution processing of thin films, the material layer is deposited from a solution composed of several solutes and solvents. The final morphology and hence the properties of the film often depend on the time needed for the evaporation of the solvents. This is typically the case for organic photoactive or electronic layers. Therefore, it is important to be able to predict the evaporation kinetics of such mixtures. We propose here a new phase-field model for the simulation of evaporating fluid mixtures and simulate their evaporation kinetics. Similar to the Hertz-Knudsen theory, the local liquid-vapor (LV) equilibrium is assumed to be reached at the film surface and evaporation is driven by diffusion away from this gas layer. In the situation where the evaporation is purely driven by the LV equilibrium, the simulations match the behavior expected theoretically from the free energy: for evaporation of pure solvents, the evaporation rate is constant and proportional to the vapor pressure. For mixtures, the evaporation rate is in general strongly time-dependent because of the changing composition of the film. Nevertheless, for highly nonideal mixtures, such as poorly compatible fluids or polymer solutions, the evaporation rate becomes almost constant in the limit of low Biot numbers. The results of the simulation have been successfully compared to experiments on a polystyrene-toluene mixture. The model allows to take into account deformations of the liquid-vapor interface and, therefore, to simulate film roughness or dewetting.

A phase-field model for the evaporation of thin film mixtures.

The performance of solution-processed solar cells strongly depends on the geometrical structure and roughness of the photovoltaic layers formed during film drying. During the drying process, the interplay of crystallization and liquid-liquid demixing leads to structure formation on the nano- and microscale and to the final rough film. In order to better understand how the film structure can be improved by process engineering, we aim at theoretically investigating these systems by means of phase-field simulations. We introduce an evaporation model based on the Cahn-Hilliard equation for the evolution of the fluid concentrations coupled to the Allen-Cahn equation for the liquid-vapour phase transformation. We demonstrate its ability to match the experimentally measured drying kinetics and study the impact of the parameters of our model. Furthermore, the evaporation of solvent blends and solvent-vapour annealing are investigated. The dry film roughness emerges naturally from our set of equations, as illustrated through preliminary simulations of spinodal decomposition and film drying on structured substrates.

Fully Printed Infrared Photodetectors from PbS Nanocrystals with Perovskite Ligands.

Colloidal nanocrystals from PbS are successfully applied in highly sensitive infrared photodetectors with various device architectures. Here, we demonstrate all-printed devices with high detectivity (∼1012 cm Hz1/2/W) and a cut-off frequency of >3 kHz. The low material consumption (<0.3 mg per detector) and short processing time (14 s per detector) enabled by the automated printing promises extremely low device costs. To enable all-printed devices, an ink formulation was developed based on nanocrystals stabilized by perovskite-like methylammonium iodobismuthate ligands, which are dispersed in a ternary solvent. Fully inkjet printed devices based on this solvent were achieved with printed silver electrodes and a ZnO interlayer. Considerable improvements were obtained by the addition of small amounts of the polymer poly(vinylpyrrolidone) to the ink. The polymer improved the colloidal stability of the ink and its film-formation properties and thus enabled the scalable printing of single detectors and detector arrays. While photoconductors were shown here, the developed ink will certainly find application in a series of further electronic devices based on nanocrystals from a broad range of materials.

Suppression of Thermally Induced Fullerene Aggregation in Polyfullerene-Based Multiacceptor Organic Solar Cells.

A novel main-chain polyfullerene, poly[fullerene-alt-2,5-bis(octyloxy)terephthalaldehyde] (PPC4), is investigated for its hypothesized superior morphological stability as an electron-accepting material in organic photovoltaics relative to the widely used fullerene phenyl-C61-butyric acid methyl ester (PCBM). When mixed with poly(3-hexylthiophene-2,5-diyl) (P3HT), PPC4 affords low-charge-generation yields because of poor intermixing within the blend. The adoption of a multiacceptor system, by introducing PCBM into the P3HT:polyfullerene blend, was found to lead to a 3-fold enhancement in charge generation, affording power conversion efficiencies very close to that of the prototypical P3HT:PCBM binary control. Upon thermal stressing and in contrast to the P3HT:PCBM binary, photovoltaic devices based on the multiacceptor system demonstrated significantly improved stability, outperforming the control because of suppression of the PCBM migration and aggregation processes responsible for rapid device failure. We rationalize the influence of the fullerene miscibility and its implications on the device performance in terms of a thermodynamic model based on Flory-Huggins solution theory. Finally, the potential universal applicability of this approach for thermal stabilization of organic solar cells is demonstrated, utilizing an alternative low-band-gap polymer-donor system.

Solar Trees: First Large-Scale Demonstration of Fully Solution Coated, Semitransparent, Flexible Organic Photovoltaic Modules.

The technology behind a large area array of flexible solar cells with a unique design and semitransparent blue appearance is presented. These modules are implemented in a solar tree installation at the German pavilion in the EXPO2015 in Milan/IT. The modules show power conversion efficiencies of 4.5% and are produced exclusively using standard printing techniques for large-scale production.

Photodegradation of C-PCPDTBT and Si-PCPDTBT: influence of the bridging atom on the stability of a low-band-gap polymer for solar cell application.

The kinetics of photodegradation and the reactivity of different sites of the low-band-gap polymers poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b:3,4-b']dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (C-PCPDTBT) and poly[2,6-(4,4-bis-(2-ethylhexyl)dithieno[3,2-b:2',3'-d]silole)-alt-4,7-(2,1,3-benzothiadiazole)] (Si-PCPDTBT) are investigated as thin films and are compared to those of poly(3-hexylthiophene) (P3HT). The decay kinetics are monitored with UV/Vis spectroscopy and the reactivity and product evolution are investigated with X-ray photoelectron spectroscopy (XPS). Both polymers exhibit higher stability than P3HT. The bridging atom in the cyclopentadithiophene (CPDT) subunit has a significant influence on the stability. Varying oxidation rates for the different elements were observed. In the case of Si-PCPDTBT, the silicon atom is oxidized primarily, whereas the photooxidation rates of the other elements are reduced relative to C-PCPDTBT. Additionally, XPS experiments with varying excitation energies reveal a significant reaction gradient within a few nanometers of the surface of degraded thin films of C-PCPDTBT.

Structural correlations in the generation of polaron pairs in low-bandgap polymers for photovoltaics.

Polymeric semiconductors are materials where unique optical and electronic properties often originate from a tailored chemical structure. This allows for synthesizing conjugated macromolecules with ad hoc functionalities for organic electronics. In photovoltaics, donor-acceptor co-polymers, with moieties of different electron affinity alternating on the chain, have attracted considerable interest. The low bandgap offers optimal light-harvesting characteristics and has inspired work towards record power conversion efficiencies. Here we show for the first time how the chemical structure of donor and acceptor moieties controls the photogeneration of polaron pairs. We show that co-polymers with strong acceptors show large yields of polaron pair formation up to 24% of the initial photoexcitations as compared with a homopolymer (η=8%). π-conjugated spacers, separating the donor and acceptor centre of masses, have the beneficial role of increasing the recombination time. The results provide useful input into the understanding of polaron pair photogeneration in low-bandgap co-polymers for photovoltaics.

Probing the nanoscale phase separation and photophysics properties of low-bandgap polymer:fullerene blend film by near-field spectroscopic mapping.

The effect of the additive 1,8-octanedithiol (ODT) on the nanometer-scale morphology and local photophysical properties of low-bandgap polymer blends of poly[2,6-(4,4-bis(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b'] dithiophene)- alt-4,7(2,1,3-benzothiadiazole)] (PCPDTBT) and [6,6]-phenyl C(61) -butyric acid methyl ester (PCBM) is investigated. Phase separations of the PCPDTBT:PCBM blend film induced by ODT are visualized by the morphological changes from fibril-shaped features to spherical bumps, by the dramatically increased photoluminescence emission from PCPDTBT that was originally largely quenched, and by the fluctuations of spectral features at different locations of the sample surface. The correlations between the morphology and the local photophysical properties of the blend film with/without ODT at both the micrometer and nanometer scales are revealed by confocal and high-resolution near-field spectroscopic mapping techniques.

Spatial control of 3D energy transfer in supramolecular nanostructured host-guest architectures.

Systematic control of 3D energy transfer (ET) dynamics is achieved in supramolecular nanostructured host-guest systems using spacer-functionalized guest chromophores. Quantum chemistry-based Monte Carlo simulations reveal the strong impact of the spacer length on the ET dynamics, efficiency, and dimensionality. Remarkably high exciton diffusion lengths demonstrate that there is ample scope for optimizing oligomeric or polymeric optoelectronic devices.

Combined spectroscopic characterization of electron transfer at hybrid CuPcF(16)/GaAs semiconductor interfaces.

We characterize photoinduced charge injection at the interface between a fluorinated copper phthalocyanine (CuPcF(16)) film deposited over a GaAs(100) wafer by means of pump-probe spectroscopy combined with ultraviolet photoemission spectroscopy (UPS) and electromodulated transmission spectroscopy. UPS characterization of the hybrid interface demonstrates that the CuPcF(16) 's lowest unoccupied molecular level (LUMO) is almost aligned with the GaAs conduction band. Upon photoexcitation of the hybrid interface with 150 fs pulses we observe an efficient photoinduced electron transfer from CuPcF(16) to GaAs. The evolution of interfacial CuPcF(16) charges appear to be strongly influenced by energy level alignment at the GaAs/CuPcF(16) heterojunction.

Three-dimensional energy transport in highly luminescent host-guest crystals: a quantitative experimental and theoretical study.

We present a combined experimental and theoretical study on energy transfer processes in a well-defined three-dimensional host-guest system, which allows for high chromophore concentrations while maintaining the highly luminescent properties of the molecules in solution. The self-assembled, nanostructured system with a defined ratio of included donor and acceptor molecules is amenable to quantitative comparison between experiment and theory. Experimentally, energy migration is monitored by steady-state and time-resolved fluorescence spectroscopy. From the theoretical side, the energy transfer process is modeled by a Monte Carlo approach including homo and hetero transfer steps with multi-acceptor distribution. In this dense system, the classical Förster point-dipole approach for energy transfer breaks down, and the hopping rates are therefore calculated on the basis of a quantum-chemical description of the donor and acceptor excited states. Thereby, the true directionality of the excitation diffusion is revealed. Excellent agreement with experimental donor and acceptor decays and overall transfer efficiencies is found. Even at low acceptor concentrations (down to 0.1%), efficient energy transfer over distances as large as 25 nm was observed due to rapid energy migration through a series of homo-transfer steps with preference along one direction of the structure.

Effect of fluorination on the electronic structure and optical excitations of pi-conjugated molecules.

Fluorination of pi-conjugated organic molecules is a strategy to obtain possible n-type conducting and air-stable materials due to the lowering of the frontier molecular orbitals (MOs) by the high electronegativity of fluorine. Nevertheless, the resulting optical gaps may be widened or narrowed, depending on the molecular backbone and/or the number and position of the fluorine atoms. The authors have performed time-dependent density functional theory calculations to address the subtle influence of fluorine substitution on the absolute MO energies and the subsequent impact on the optical transitions in homologous conjugated oligomers based on thiophene and acene units.

Understanding supported reactions in spherical compartments: a general algorithm to model and determine rate constants, diffusion coefficients, and spatial product distributions.

A general algorithm allowing the numerical modeling of the time and space dependence of product formation in spherical reaction volumes is described. The algorithm is described by the complete set of mass balance equations. On the basis of these equations, the effects of the diffusion coefficient, reaction rate, bead size, reagent excess, and packing density of the resin beads on the overall reaction rates are determined for second-order reactions. Experimental data of reaction progress are employed to calculate reaction rates and diffusion coefficients in polymer-supported reactions. In addition, the conditions for shell-like product formation are determined, and various strategies for the radial patterning of resin beads are compared. The effect of diffusion on polymer-supported enzyme-catalyzed reactions of the Michaelis-Menten type is treated, as well. Finally, the effects of typical nonideal solid-phase phenomena, namely, the inhomogeneity of rate constants and the concentration dependence of diffusion coefficients, on overall rates are discussed.

Solid-state optical properties of linear polyconjugated molecules: pi-stack contra herringbone.

The intermolecular arrangement in the solid state and the consequences on the optical and photophysical properties are studied on different derivatives of oligophenylenevinylenes by UV/VIS absorption and angular-resolved polarized fluorescence spectroscopy. Unsubstituted distyrylbenzene (DSB) organizes in a herringbone manner, with the long axes of the molecules oriented in parallel, but the short axes almost perpendicular to each other. Fluorinated distyrylbenzene (F(12)DSB) as well as the DSB:F(12)DSB cocrystals prefer cofacial pi-stacking in the solid state. For all structures, the consequence of the parallel alignment of the transition moments is a strongly blueshifted H-type absorption spectrum and a low radiative rate constant k(F). Significant differences are observed for the emission spectra: the perpendicular arrangement of the short axes in DSB crystals leads to only very weak intermolecular vibronic coupling. Hence the emission spectrum is well structured, very similar to the one in solution. For F(12)DSB and DSB:F(12)DSB, the cofacial arrangement of the adjacent molecules enables strong intermolecular vibronic coupling of adjacent molecules. Thus, an unstructured and strongly redshifted excimerlike emission spectrum is observed. The differences in the electronic nature of the excited states are highlighted by quantum-chemical calculations, revealing the contribution of interchain excitations to the electronic transitions.

Synthesis of axially substituted tetrapyrazinoporphyrazinato metal complexes for optical limiting and study of their photophysical properties.

The synthesis, characterization, and various photophysical properties of axially substituted tetrapyrazinotetraazaporphyrinatotitanium(IV) oxide (Pyz(4)TAPTiO) (1), tetrapyrazinotetraazaporphyrinatovanadium(IV) oxide (Pyz(4)TAPVO) (2), tetrapyrazinotetraazaporphyrinatozirconium(IV) dihydroxide [Pyz(4)TAPZr(OH)(2)] (3) are reported. Nonlinear optical (NLO) properties of Pyz(4)TAPs 1-3 have been evaluated at 532 nm with nanosecond pulses for optical limiting (OL). It is found that the introduction of nitrogen atoms in the condensed rings of the tetrapyrrolic macrocycles together with the presence of axial substituents lead to an improvement of the excited-state absorption properties in comparison to phthalocyanines (Pcs). In the linear optical regime Pyz(4)TAPs 1-3 display a blue shift (about 50-60 nm) of the main UV-vis absorption bands with respect to Pcs and exhibit orange-red fluorescence, which can be observed with the eye in the case of 1. Frontier electronic orbitals of a Pyz(4)TAP could be depicted from available experimental data and the results of density functional theory (DFT) calculations. In the solid state, Pyz(4)TAPTiO (1) displays photoconducting properties.