Triggered metabolism of adenosine triphosphate as an explanation for the chemical heterogeneity of heterotopic ossification.

Heterotopic ossification (HO), the pathological formation of bone in soft tissues, is a debilitating condition, as well as one of the few instances of de novo bone formation in adults. Chemical mapping of HO tissue showed distinct islands of calcium phosphate within phosphate-deficient, calcium-rich regions, suggesting a transition to apatitic bone mineral from a non-phosphatic precursor. The transition of amorphous calcium carbonate (ACC), a generally suggested bone-mineral precursor, in physiological conditions was thus investigated. Here, we show that adenosine triphosphate (ATP), present in high amounts in forming bone, stabilised ACC for weeks in physiological conditions and that enzymatic degradation of ATP triggered rapid crystallisation into apatite, through an amorphous calcium phosphate phase. It is suggested that this localised enzymatic degradation could explain the chemical heterogeneity seen in HO and may also represent a pathway to physiological bone mineralisation.

Bioengineering extracellular vesicles: smart nanomaterials for bone regeneration.

In the past decade, extracellular vesicles (EVs) have emerged as key regulators of bone development, homeostasis and repair. EV-based therapies have the potential to circumnavigate key issues hindering the translation of cell-based therapies including functional tissue engraftment, uncontrolled differentiation and immunogenicity issues. Due to EVs' innate biocompatibility, low immunogenicity, and high physiochemical stability, these naturally-derived nanoparticles have garnered growing interest as potential acellular nanoscale therapeutics for a variety of diseases. Our increasing knowledge of the roles these cell-derived nanoparticles play, has made them an exciting focus in the development of novel pro-regenerative therapies for bone repair. Although these nano-sized vesicles have shown promise, their clinical translation is hindered due to several challenges in the EV supply chain, ultimately impacting therapeutic efficacy and yield. From the biochemical and biophysical stimulation of parental cells to the transition to scalable manufacture or maximising vesicles therapeutic response in vivo, a multitude of techniques have been employed to improve the clinical efficacy of EVs. This review explores state of the art bioengineering strategies to promote the therapeutic utility of vesicles beyond their native capacity, thus maximising the clinical potential of these pro-regenerative nanoscale therapeutics for bone repair.

The Quantification of Injectability by Mechanical Testing.

Injectable biomaterials are becoming increasingly popular for the minimally invasive delivery of drugs and cells. These materials are typically more viscous than traditional aqueous injections and may be semi-solid, therefore, their injectability cannot be assumed. This protocol describes a method to objectively assess the injectability of these materials using a standard mechanical tester. The syringe plunger is compressed by the crosshead at a set rate, and the force is measured. The maximum or plateau force value can then be used for comparison between samples, or to an absolute force limit. This protocol can be used with any material, and any syringe and needle size or geometry. The results obtained may be used to make decisions about formulations, syringe and needle sizes early in the translational process. Further, the effects of altering formulations on injectability may be quantified, and the optimum time to inject temporally changing materials determined. This method is also suitable as a reproducible way to examine the effects of injection on a material, to study phenomena such as self-healing and filter pressing or study the effects of injection on cells. This protocol is faster and more directly applicable to injectability than rotational rheology, and requires minimal post processing to obtain key values for direct comparisons.

Filling the Gap: A Correlation between Objective and Subjective Measures of Injectability.

Various injectable biomaterials are developed for the minimally invasive delivery of therapeutics. Typically, a mechanical tester is used to ascertain the force required to inject these biomaterials through a given syringe-needle system. However, currently there is no method to correlate the force measured in the laboratory to the perceived effort required to perform that injection by the end user. In this article, the injection force (F) for a variety of biomaterials, displaying a range of rheological properties, is compared with the effort scores from a 50 person panel study. The maximum injection force measured at crosshead speed 1 mm s-1 is a good proxy for injection effort, with an R2 of 0.89. This correlation leads to the following conclusions: participants can easily inject 5 mL of substance for F < 12 N; considerable effort is required to inject 5 mL for 12 N < F < 38 N; great effort is required and <5 mL can be injected for 38 N < F < 64 N; and materials are entirely non-injectable for F > 64 N. These values may be used by developers of injectable biomaterials to make decisions about formulations and needle sizes early in the translational process.

Physical Structuring of Injectable Polymeric Systems to Controllably Deliver Nanosized Extracellular Vesicles.

Extracellular vesicles (EVs) are emerging as a promising alternative approach to cell-therapies. However, to realize the potential of these nanoparticles as new regenerative tools, healthcare materials that address the current limitations of systemic administration need to be developed. Here, two technologies for controlling the structure of alginate based microgel suspensions are used to develop sustained local release of EVs, in vitro. Microparticles formed using a shearing technique are compared to those manufactured using vibrational technology, resulting in either anisotropic sheet-like or spheroid particles, respectively. EVs harvested from preosteoblasts are isolated using differential ultracentrifugation and successfully loaded into the two systems, while maintaining their structures. Promisingly, in addition to exhibiting even EV distribution and high stability, controlled release of vesicles from both structures is exhibited, in vitro, over the 12 days studied. Interestingly, a significantly greater number of EVs are released from the suspensions formed by shearing (69.9 ± 10.5%), compared to the spheroids (35.1 ± 7.6%). Ultimately, alterations to the hydrogel physical structures have shown to tailor nanoparticle release while simultaneously providing ideal material characteristics for clinical injection. Thus, the sustained release mechanisms achieved through manipulating the formation of such biomaterials provide a key to unlocking the therapeutic potential held within EVs.

The design of additively manufactured lattices to increase the functionality of medical implants.

The rise of antibiotic resistant bacterial species is driving the requirement for medical devices that minimise infection risks. Antimicrobial functionality may be achieved by modifying the implant design to incorporate a reservoir that locally releases a therapeutic. For this approach to be successful it is critical that mechanical functionality of the implant is maintained. This study explores the opportunity to exploit the design flexibilities possible using additive manufacturing to develop porous lattices that maximise the volume available for drug loading while maintaining load-bearing capacity of a hip implant. Eight unit cell types were initially investigated and a volume fraction of 30% was identified as the lowest level at which all lattices met the design criteria in ISO 13314. Finite element analysis (FEA) identified three lattice types that exhibited significantly lower displacement (10-fold) compared with other designs; Schwartz primitive, Schwartz primitive pinched and cylinder grid. These lattices were additively manufactured in Ti-6Al-4V using selective laser melting. Each design exceeded the minimum strength requirements for orthopaedic hip implants according to ISO 7206-4. The Schwartz primitive (Pinched) lattice geometry, with 10% volume fill and a cubic unit cell period of 10, allowed the greatest void volume of all lattice designs whilst meeting the fatigue requirements for use in an orthopaedic implant (ISO 7206-4). This paper demonstrates an example of how additive manufacture may be exploited to add additional functionality to medical implants.

Surface Finish has a Critical Influence on Biofilm Formation and Mammalian Cell Attachment to Additively Manufactured Prosthetics.

Additive manufacturing (AM) technologies enable greater geometrical design freedom compared with subtractive processes. This flexibility has been used to manufacture patient-matched implants. Although the advantages of AM are clear, the optimization at each process stage is often understated. Here we demonstrate that surface finishing of selective laser melted (SLM) implants significantly alters topography, which has implications for cellular and biofilm adhesion. Hot isostatic pressing of as-fabricated Ti-6Al-4V implants was shown to reduce porosity (1.04 to 0.02%) and surface roughness (34 ± 8 to 22 ± 3 µm). Despite these surface changes, preosteoblasts exhibited a similar viability and proliferation after 7 days of culture. Contrastingly, sandblasting and polishing significantly reduced cellular activity and increased cytotoxicity. Bacterial specimens (Staphylococcus aureus, Staphylococcus epidermidis and Pseudomonas aeruginosa) adhered more homogeneously to sandblasted implants compared with other treatments. This suggests that sandblasting may place the implant at risk of infection and reduce the strength of interaction with the surrounding soft tissues. The ability to tune the adhesion of cells to additively manufactured Ti-6Al-4V implants using postprocessing methods was demonstrated. Because the degree of tissue integration required of implants is application specific, these methods may be useful to tailor osseointegration. However, surface competition between mammalian and bacterial cells remains a challenge.

Adding functionality with additive manufacturing: Fabrication of titanium-based antibiotic eluting implants.

Additive manufacturing technologies have been utilised in healthcare to create patient-specific implants. This study demonstrates the potential to add new implant functionality by further exploiting the design flexibility of these technologies. Selective laser melting was used to manufacture titanium-based (Ti-6Al-4V) implants containing a reservoir. Pore channels, connecting the implant surface to the reservoir, were incorporated to facilitate antibiotic delivery. An injectable brushite, calcium phosphate cement, was formulated as a carrier vehicle for gentamicin. Incorporation of the antibiotic significantly (p=0.01) improved the compressive strength (5.8±0.7MPa) of the cement compared to non-antibiotic samples. The controlled release of gentamicin sulphate from the calcium phosphate cement injected into the implant reservoir was demonstrated in short term elution studies using ultraviolet-visible spectroscopy. Orientation of the implant pore channels were shown, using micro-computed tomography, to impact design reproducibility and the back-pressure generated during cement injection which ultimately altered porosity. The amount of antibiotic released from all implant designs over a 6hour period (<28% of the total amount) were found to exceed the minimum inhibitory concentrations of Staphylococcus aureus (16µg/mL) and Staphylococcus epidermidis (1µg/mL); two bacterial species commonly associated with periprosthetic infections. Antibacterial efficacy was confirmed against both bacterial cultures using an agar diffusion assay. Interestingly, pore channel orientation was shown to influence the directionality of inhibition zones. Promisingly, this work demonstrates the potential to additively manufacture a titanium-based antibiotic eluting implant, which is an attractive alternative to current treatment strategies of periprosthetic infections.

Bedside, Benchtop, and Bioengineering: Physicochemical Imaging Techniques in Biomineralization.

The need to quantify physicochemical properties of mineralization spans many fields. Clinicians, mineralization researchers, and bone tissue bioengineers need to be able to measure the distribution, quantity, and the mechanical and chemical properties of mineralization within a wide variety of substrates from injured muscle to electrospun polymer scaffolds and everything in between. The techniques available to measure these properties are highly diverse in terms of their complexity and utility. Therefore it is of the utmost importance that those who intend to use them have a clear understanding of the advantages and disadvantages of each technique and its appropriateness to their specific application. This review provides all of this information for each technique and uses heterotopic ossification and engineered bone substitutes as examples to illustrate how these techniques have been applied. In addition, we provide novel data using advanced techniques to analyze human samples of combat related heterotopic ossification.

A tale of two pelvises.

Two female doctors who were undergoing officer training at the Royal Military Academy Sandhurst sustained pubic ramus stress fractures. This report looks at the reasons why these medical officers may have sustained these fractures and how they may be prevented in future.