Removal of cadmium and lead ions from aqueous solutions by novel dolomite-quartz@Fe3O4 nanocomposite fabricated as nanoadsorbent.

The elimination of heavy metal ion contaminants from residual waters is critical to protect humans and the environment. The natural clay (dolomite and quartz) based composite Fe3O4 nanoparticles (DQ@Fe3O4) has been largely explored for this purpose. Experimental variables such as temperature, pH, heavy metal concentration, DQ@Fe3O4 dose, and contact time were optimized in details. The DQ@Fe3O4 nanocomposite was found to achieve maximum removals of 95.02% for Pb2+ and 86.89% for Cd2+, at optimal conditions: pH = 8.5, adsorbent dose = 2.8 g L-1, the temperature = 25 °C, and contact time = 140 min, for 150 mg L-1 heavy metal ion initial concentration. The Co-precipitation of dolomite-quartz by Fe3O4 nanoparticles was evidenced by SEM-EDS, TEM, AFM, FTIR, XRD, and TGA analyses. Further, the comparison to the theoretical predictions, of the adsorption kinetics, and at the equilibrium, of the composite, revealed that they fit, respectively to, the pseudo-second-order kinetic, and Langmuir isotherm. These both models were found to better describe the metal binding onto the DQ@Fe3O4 surface. This suggested a homogenous monolayer sorption dominated by surface complexation. Additionally, thermodynamic data have shown that the adsorption of heavy metal ions is considered a spontaneous and exothermic process. Moreover, Monte Carlo (MC) simulations were performed in order to elucidate the interactions occurring between the heavy metal ions and the DQ@Fe3O4 nanocomposite surface. A good correlation was found between the simulated and the experimental data. Moreover, based on the negative values of the adsorption energy (Eads), the adsorption process was confirmed to be spontaneous. In summary, the as-prepared DQ@Fe3O4 can be considered a low-cost-effective heavy metals adsorbent, and it has a great potential application for wastewater treatment.

Multifunctional cobalt oxide nanocomposites for efficient removal of heavy metals from aqueous solutions.

In this study, co-precipitation synthesis of natural clay (NC) with Co3O4 nanoparticles (NPs) is carried out to elaborate the super NC@Co3O4 nanocomposites with admirable salinity confrontation, environmental stability and reusability, to eliminate heavy metal pollution such as toxic Pb(II) and Cd(II) ions. The advantages of using the NC@Co3O4 adsorbent are easy synthesis and biocompatibility. In addition, NC@Co3O4 can keep an excellent adsorption capacity by taking into account various environmental parameters such as the pH solution, NC@Co3O4 dose, adsorption process time and the initial heavy metals concentration. Furthermore, FTIR, XRD, TGA, SEM-EDS, TEM and AFM analyses were performed to confirm NC@Co3O4 nanocomposites synthesis and characterisation. The adsorption efficiencies of Pb(II) and Cd(II) ions by NC@Co3O4 nanocomposites were demonstrated to be up to 86.89% and 82.06% respectively. Regarding the adsorption from water onto the NC@Co3O4 nanocomposites, kinetics data were well fitted with PSO kinetic model, whereas a good agreement was found between the equilibrium adsorption and theoretical Langmuir isotherm model leading to maximum adsorption capacities of 55.24 and 52.91 mg/g, for Pb(II) and Cd(II) respectively. Monte Carlo (MC) simulations confirmed the spontaneous of this adsorption based on the negative values of Eads. The MC simulations were performed to highlight the interactions occurring between heavy metal ions and the surface of NC@Co3O4 nanocomposites, these were well correlated with the experimental results. Overall the study showed that NC@Co3O4 nanoadsorbents have strongly versatile applications and are well designed for pollutant removal from wastewater due to their unique adsorptive properties.

Green synthesis of Ag2O nanoparticles using Punica granatum leaf extract for sulfamethoxazole antibiotic adsorption: characterization, experimental study, modeling, and DFT calculation.

Silver oxide (Ag2O) nanoparticles (NPs) were generated by synthesizing green leaf extract of Punica granatum, and afterwards they were used as adsorbent to remove the antibiotic additive sulfamethoxazole (SMX) from aqueous solutions. Prior of their use as adsorbent, the Ag2O NPs were characterized by various methods such as X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), scanning electron microscopy/energy-dispersive X-ray (SEM-EDX), and transmission electron microscopy (TEM). The Ag2O NPs were found to be spherically shaped and stabilized by the constituents of the extract. Further, at SMX antibiotic concentration of 100 mg L-1, the Ag2O NPs achieved almost complete removal of 98.93% within 90 min, and by using 0.8 g L-1 of adsorbent dose at pH=4 and temperature T=308 K. In addition, the experimental data were well fitted with the theoretical Langmuir model indicating homogeneous adsorbed layer of the SMX antibiotic on the Ag2O NPs surface. The maximum uptake capacity was 277.85 mg g-1. A good agreement was also found between the kinetic adsorption data and the theoretical pseudo-second-order model. Regarding the thermodynamic adsorption aspects, the data revealed an endothermic nature and confirmed the feasibility and the spontaneity of the adsorption reaction. Furthermore, the regeneration study has shown that the Ag2O NPs could be efficiently reused for up to five cycles. The geometric structures have been optimized and quantum chemical parameters were calculated for the SMX unprotonated (SMX+/-) and protonated (SMX+) using density functional theory (DFT) calculation. The DFT results indicated that the unprotonated SMX+/- reacts more favorably on the Ag2O surface, as compared to the protonated SMX+. The SMX binding mechanism was predominantly controlled by the electrostatic attraction, hydrogen bond, hydrophobic, and π-π interactions. The overall data suggest that the Ag2O NPs have promising potential for antibiotic removal from wastewater.