Stoichiometry modulates the optoelectronic functionality of zinc phosphide (Zn3-xP2+x).

Predictive synthesis-structure-property relationships are at the core of materials design for novel applications. In this regard, correlations between the compositional stoichiometry variations and functional properties are essential for enhancing the performance of devices based on these materials. In this work, we investigate the effect of stoichiometry variations and defects on the structural and optoelectronic properties of monocrystalline zinc phosphide (Zn3P2), a promising compound for photovoltaic applications. We use experimental methods, such as electron and X-ray diffraction and Raman spectroscopy, along with density functional theory calculations, to showcase the favorable creation of P interstitial defects over Zn vacancies in P-rich and Zn-poor compositional regions. Photoluminescence and absorption measurements show that these defects create additional energy levels at about 180 meV above the valence band. Furthermore, they lead to the narrowing of the bandgap, due to the creation of band tails in the region of around 10-20 meV above the valence and below the conduction band. The ability of zinc phosphide to form off-stoichiometric compounds provides a new promising opportunity for tunable functionality that benefits applications. In that regard, this study is crucial for the further development of zinc phosphide and its application in optoelectronic and photovoltaic devices, and should pave the way for defect engineering in this kind of material.

Nanoscale Growth Initiation as a Pathway to Improve the Earth-Abundant Absorber Zinc Phosphide.

Growth approaches that limit the interface area between layers to nanoscale regions are emerging as a promising pathway to limit the interface defect formation due to mismatching lattice parameters or thermal expansion coefficient. Interfacial defect mitigation is of great interest in photovoltaics as it opens up more material combinations for use in devices. Herein, an overview of the vapor-liquid-solid and selective area epitaxy growth approaches applied to zinc phosphide (Zn3P2), an earth-abundant absorber material, is presented. First, we show how different morphologies, including nanowires, nanopyramids, and thin films, can be achieved by tuning the growth conditions and growth mechanisms. The growth conditions are also shown to greatly impact the defect structure and composition of the grown material, which can vary considerably from the ideal stoichiometry (Zn3P2). Finally, the functional properties are characterized. The direct band gap could accurately be determined at 1.50 ± 0.1 eV, and through complementary density functional theory calculations, we can identify a range of higher-order band gap transitions observed through valence electron energy loss spectroscopy and cathodoluminescence. Furthermore, we outline the formation of rotated domains inside of the material, which are a potential origin of defect transitions that have been long observed in zinc phosphide but not yet explained. The basic understanding provided reinvigorates the potential use of earth-abundant II-V semiconductors in photovoltaic technology. Moreover, the transferrable nanoscale growth approaches have the potential to be applied to other material systems, as they mitigate the constraints of substrate-material combinations causing interface defects.

Showcasing the optical properties of monocrystalline zinc phosphide thin films as an earth-abundant photovoltaic absorber.

Zinc phosphide, Zn3P2, is a semiconductor with a high absorption coefficient in the spectral range relevant for single junction photovoltaic applications. It is made of elements abundant in the Earth's crust, opening up a pathway for large deployment of solar cell alternatives to the silicon market. Here we provide a thorough study of the optical properties of single crystalline Zn3P2 thin films grown on (100) InP by molecular beam epitaxy. The films are slightly phosphorus-rich as determined by Rutherford backscattering. We elucidate two main radiative recombination pathways: one transition at approximately 1.52 eV attributed to zone-center band-to-band electronic transitions; and a lower-energy transition observed at 1.3 eV to 1.4 eV attributed to a defect band or band tail related recombination mechanisms. We believe phosphorus interstitials are likely at the origin of this band.

Trends in illicit drugs based on the analysis of seizures from the Tanzania mainland drugs market.

This study aimed at investigating the pattern of confiscated illegal drugs in the Tanzania mainland drug market from 2011 to 2016. The samples used in this study were seized by the police force and other law enforcement agents and were analysed at the Government Chemist Laboratory Authority, GCLA. A total of 90,366 samples weighing 17961.5 Kg were seized and analysed during the six years, an average of 15,061 samples corresponding to 2993.6 Kg per year. The overall results indicated cannabis to be the leading drug in terms of number of cases, number of samples and weights with 51.02%, 60.50% and 56.90%, respectively, but from 2011 to 2015 heroin had the highest percentage of both number of cases and samples by 58.46% and 55.91% of all seizures, respectively followed by cannabis. In terms of weight, heroin accounted for 67.55% and 26.32% in 2011 and 2012, respectively, whereas, the rest of the years' percentage weights were between 0.50 and 6.00% of the total seizures. The trend indicated a steady decrease in heroin seizures over the six years and an increased cannabis seizure. In 2016 cannabis was 78.28% and 80.89% of the total number of cases and samples, respectively. The results also indicated the decrease of cocaine cases and a significant increase in the amount khat. The year 2016 recorded the highest number of cases and number of samples with a total of 1212 and 48,440, respectively, which resulted from the increase in cannabis seizures by 72.28% and 80.89% of the total number of cases and samples, respectively, as compared to 2015. The second and third highest years were 2013 and 2014, respectively. The least was 2011 with 3493 samples. The trend also indicated heroin seizures were highest in 2011 (62.04%), 2014 (75.31%) and 2015 (79.26%) whereas cocaine seizures kept on decreasing gradually from 31.12% in 2011 to 0.05% in 2016. Khat (Catha edulis) had the highest weight in 2014 and 2016 and ranked second after cannabis with 43.63% of the total weight during 2011-2016 period. Benzodiazepines and amphetamine type stimulants (ATS) accounted the least in terms of number of cases and number of samples.

Raman tensor of zinc-phosphide (Zn3P2): from polarization measurements to simulation of Raman spectra.

Zinc phosphide (Zn3P2) is a II-V compound semiconductor with promising photovoltaic and thermoelectric applications. Its complex structure is susceptible to facile defect formation, which plays a key role in further optimization of the material. Raman spectroscopy can be effectively used for defect characterization. However, the Raman tensor of Zn3P2, which determines the intensity of Raman peaks and anisotropy of inelastic light scattering, is still unknown. In this paper, we use angle-resolved polarization Raman measurements on stoichiometric monocrystalline Zn3P2 thin films to obtain the Raman tensor of Zn3P2. This has allowed determination of the Raman tensor elements characteristic for the A1g, B1g and B2g vibrational modes. These results have been compared with the theoretically obtained Raman tensor elements and simulated Raman spectra from the lattice-dynamics calculations using first-principles force constants. Excellent agreement is found between the experimental and simulated Raman spectra of Zn3P2 for various polarization configurations, providing a platform for future characterization of the defects in this material.

Rotated domains in selective area epitaxy grown Zn3P2: formation mechanism and functionality.

Zinc phosphide (Zn3P2) is an ideal absorber candidate for solar cells thanks to its direct bandgap, earth-abundance, and optoelectronic characteristics, albeit it has been insufficiently investigated due to limitations in the fabrication of high-quality material. It is possible to overcome these factors by obtaining the material as nanostructures, e.g. via the selective area epitaxy approach, enabling additional strain relaxation mechanisms and minimizing the interface area. We demonstrate that Zn3P2 nanowires grow mostly defect-free when growth is oriented along the [100] and [110] of the crystal, which is obtained in nanoscale openings along the [110] and [010] on InP(100). We detect the presence of two stable rotated crystal domains that coexist in the structure. They are due to a change in the growth facet, which originates either from the island formation and merging in the initial stages of growth or lateral overgrowth. These domains have been visualized through 3D atomic models and confirmed with image simulations of the atomic scale electron micrographs. Density functional theory simulations describe the rotated domains' formation mechanism and demonstrate their lattice-matched epitaxial relation. In addition, the energies of the shallow states predicted closely agree with transition energies observed by experimental studies and offer a potential origin for these defect transitions. Our study represents an important step forward in the understanding of Zn3P2 and thus for the realisation of solar cells to respond to the present call for sustainable photovoltaic technology.

Towards defect-free thin films of the earth-abundant absorber zinc phosphide by nanopatterning.

Large-scale deployment of thin-film photovoltaics will be facilitated through earth-abundant components. Herein, selective area epitaxy and lateral overgrowth epitaxy are explored for the growth of zinc phosphide (Zn3P2), a promising earth-abundant absorber. The ideal growth conditions are elucidated, and the nucleation of single-crystal nanopyramids that subsequently evolve towards coalesced thin-films is demonstrated. The zinc phosphide pyramids exhibit room temperature bandgap luminescence at 1.53 eV, indicating a high-quality material. The electrical properties of zinc phosphide and the junction with the substrate are assessed by conductive atomic force microscopy on n-type, p-type and intrinsic substrates. The measurements are consistent with the p-type characteristic of zinc phosphide. Overall, this constitutes a new, and transferrable, approach for the controlled and tunable growth of high-quality zinc phosphide, a step forward in the quest for earth-abundant photovoltaics.

Raman spectroscopy and lattice dynamics calculations of tetragonally-structured single crystal zinc phosphide (Zn3P2) nanowires.

Earth-abundant and low-cost semiconductors, such as zinc phosphide (Zn3P2), are promising candidates for the next generation photovoltaic applications. However, synthesis on commercially available substrates, which favors the formation of defects, and controllable doping are challenging drawbacks that restrain device performance. Better assessment of relevant properties such as structure, crystal quality and defects will allow faster advancement of Zn3P2, and in this sense, Raman spectroscopy can play an invaluable role. In order to provide a complete Raman spectrum reference of Zn3P2, this work presents a comprehensive analysis of vibrational properties of tetragonally-structured Zn3P2 (space group P42/nmc) nanowires, from both experimental and theoretical perspectives. Low-temperature, high-resolution Raman polarization measurements have been performed on single-crystalline nanowires. Different polarization configurations have allowed selective enhancement of A1g, B1g and Eg Raman modes, while B2g modes were identified from complementary unpolarized Raman measurements. Simultaneous deconvolution of all Raman spectra with Lorentzian curves has allowed identification of 33 peaks which have been assigned to 34 (8 A1g + 9 B1g + 3 B2g + 14 Eg) out of the 39 theoretically predicted eigenmodes. The experimental results are in good agreement with the vibrational frequencies that have been computed by first-principles calculations based on density functional theory. Three separate regions were observed in the phonon dispersion diagram: (i) low-frequency region (<210 cm-1) which is dominated by Zn-related vibrations, (ii) intermediate region (210-225 cm-1) which represents a true phonon gap with no observed vibrations, and (iii) high-frequency region (>225 cm-1) which is attributed to primarily P-related vibrations. The analysis of vibrational patterns has shown that non-degenerate modes involve mostly atomic motion along the long crystal axis (c-axis), while degenerate modes correspond primarily to in-plane vibrations, perpendicular to the long c-axis. These results provide a detailed reference for identification of the tetragonal Zn3P2 phase and can be used for building Raman based methodologies for effective defect screening of bulk materials and films, which might contain structural inhomogeneities.

Heterotwin Zn3P2 superlattice nanowires: the role of indium insertion in the superlattice formation mechanism and their optical properties.

Zinc phosphide (Zn3P2) nanowires constitute prospective building blocks for next generation solar cells due to the combination of suitable optoelectronic properties and an abundance of the constituting elements in the Earth's crust. The generation of periodic superstructures along the nanowire axis could provide an additional mechanism to tune their functional properties. Here we present the vapour-liquid-solid growth of zinc phosphide superlattices driven by periodic heterotwins. This uncommon planar defect involves the exchange of Zn by In at the twinning boundary. We find that the zigzag superlattice formation is driven by reduction of the total surface energy of the liquid droplet. The chemical variation across the heterotwin does not affect the homogeneity of the optical properties, as measured by cathodoluminescence. The basic understanding provided here brings new propsects on the use of II-V semiconductors in nanowire technology.

Energy Efficient Policies for Data Transmission in Disruption Tolerant Heterogeneous IoT Networks.

The Internet-of-things facilitates the development of many groundbreaking applications. A large number of these applications involve mobile end nodes and a sparsely deployed network of base stations that operate as gateways to the Internet. Most of the mobile nodes, at least within city areas, are connected through low power wide area networking technologies (LPWAN) using public frequencies. Mobility and sparse network coverage result in long delays and intermittent connectivity for the end nodes. Disruption Tolerant Networks and utilization of heterogeneous wireless interfaces have emerged as key technologies to tackle the problem at hand. The first technology renders communication resilient to intermittent connectivity by storing and carrying data while the later increases the communication opportunities of the end nodes and at the same time reduces energy consumption whenever short-range communication is possible. However, one has to consider that end nodes are typically both memory and energy constrained devices which makes finding an energy efficient data transmission policy for heterogeneous disruption tolerant networks imperative. In this work we utilize information related to the spatial availability of network resources and localization information to formulate the problem at hand as a dynamic programming problem. Next, we utilize the framework of Markov Decision Processes to derive approximately optimal and suboptimal data transmission policies. We also prove that we can achieve improved packet transmission policies and reduce energy consumption, extending battery lifetime. This is achieved by knowing the spatial availability of heterogeneous network resources combined with the mobile node's location information. Numerical resultsshow significant gains achieved by utilizing the derived approximately optimal and suboptimal policies.

Clinical Neuroscience in Practice: An Experiential Learning Course for Undergraduates Offered by Neurosurgeons and Neuroscientists.

Many pre-health students pursue extracurricular shadowing opportunities to gain clinical experience. The Virginia Tech School of Neuroscience introduced a formal course that provides a clinical experience superior to that received by many medical students. This course is composed of weekly 75-minute seminars that cover diseases affecting the nervous system, their diagnosis and treatment, complemented by weekly half-day intensive clinical experiences with unprecedented access to a team of neurosurgeons (in hospital operating rooms, Intensive Care Units, emergency room, angiographic suites, and wards). In the operating rooms, students routinely "scrub-in" for complex surgeries. On hospital rounds, students experience direct patient care and receive in-depth exposure to modern nervous system imaging. Students participate in two 24-hour "on-call" experiences with team providers. After call, students participate in cognitive and psychological studies to assess physiological and psychological effects of call-related sleep deprivation. Students prepare weekly essays on challenging socioeconomic and ethical questions, exploring subjects such as the cost of medicine and inequalities in access to health care. Towards the end of the course, students meet with the admission dean of the Virginia Tech Carilion medical school; they prepare a personal statement for medical school/graduate school applications, and attend a half-day block of mock medical school/graduate school interviews delivered by experienced clinicians. In lieu of a final exam, each student presents to the entire neurosurgery department, an in-depth clinical analysis of a case in which they participated. We provide details on implementation, challenges and outcomes based on experiences from three semesters with a total enrollment of approximately 60 students.

Chemical Bath Deposition of p-Type Transparent, Highly Conducting (CuS)x:(ZnS)1-x Nanocomposite Thin Films and Fabrication of Si Heterojunction Solar Cells.

P-type transparent conducting films of nanocrystalline (CuS)x:(ZnS)1-x were synthesized by facile and low-cost chemical bath deposition. Wide angle X-ray scattering (WAXS) and high resolution transmission electron microscopy (HRTEM) were used to evaluate the nanocomposite structure, which consists of sub-5 nm crystallites of sphalerite ZnS and covellite CuS. Film transparency can be controlled by tuning the size of the nanocrystallites, which is achieved by adjusting the concentration of the complexing agent during growth; optimal films have optical transmission above 70% in the visible range of the spectrum. The hole conductivity increases with the fraction of the covellite phase and can be as high as 1000 S cm(-1), which is higher than most reported p-type transparent materials and approaches that of n-type transparent materials such as indium tin oxide (ITO) and aluminum doped zinc oxide (AZO) synthesized at a similar temperature. Heterojunction p-(CuS)x:(ZnS)1-x/n-Si solar cells were fabricated with the nanocomposite film serving as a hole-selective contact. Under 1 sun illumination, an open circuit voltage of 535 mV was observed. This value compares favorably to other emerging heterojunction Si solar cells which use a low temperature process to fabricate the contact, such as single-walled carbon nanotube/Si (370-530 mV) and graphene/Si (360-552 mV).

Preserved and impaired aspects of feed-forward grip force control after chronic somatosensory deafferentation.

BACKGROUND: Although feed-forward mechanisms of grip force control are a prerequisite for skilled object manipulation, somatosensory feedback is essential to acquire, maintain, and adapt these mechanisms. OBJECTIVE: Individuals with complete peripheral deafferentation provide the unique opportunity to study the function of the motor system deprived of somatosensory feedback. METHODS: Two individuals (GL and IW) with complete chronic deafferentation of the trunk and limbs were tested during cyclic vertical movements of a hand-held object. Such movements induce oscillating loads that are typically anticipated by parallel modulations of the grip force. Load magnitude was altered by varying either the movement frequency or object weight. RESULTS: GL and IW employed excessive grip forces probably reflecting a compensatory mechanism. Despite this overall force increase, both deafferented participants adjusted their grip force level according to the load magnitude, indicating preserved scaling of the background grip force to physical demands. The dynamic modulation of the grip force with the load force was largely absent in GL, whereas in IW only slower movements were clearly affected. CONCLUSIONS: The authors hypothesize that the deafferented patients may have utilized visual and vestibular cues and/or an efferent copy of the motor command of the arm movement to scale the grip force level. Severely impaired grip force-load coupling in GL suggests that sensory information is important for maintaining a precise internal model of dynamic grip force control. However, comparably better performance in IW argues for the possibility that alternative cues can be used to trigger a residual internal model.

Variability of biological responses to silicas: effect of origin, crystallinity, and state of surface on generation of reactive oxygen species and morphological transformation of mammalian cells.

Variously modified quartz dusts and one amorphous diatomaceous earth have been compared in their potential to release HO* radicals and in their activity in the Syrian hamster embryo (SHE) cell transformation assay. Both original dusts, made up by well-crystallized quartz particles, or by mostly amorphous, variously shaped, silica particles, were active in HO* release, were cytotoxic, and induced morphological transformation in SHE cells. The cristobalite dust, obtained by heating quartz above the phase transition temperature, lost any activity in free radical release, cytotoxicity, and transforming potency. Surface-modified quartz dusts were obtained by a mild etching with HF, by depriving the surface of trace iron with deferoxamine, or by enriching it with iron. The chemical and biological activity decreased in all cases. Both iron-deprived and iron-enriched quartz were nearly inactive. A linear correlation was found between the amount of HO* released by the particles and the transformation frequency. When the SHE cell assay was performed in the presence of mannitol or antioxidant enzymes (superoxide dismutase [SOD] or catalase), the number of transformed cells markedly decreased. This effect was more pronounced for catalase and mannitol than for SOD. HO* release was reduced, but not suppressed, by deferoxamine. All the above results are consistent with the presence of two kinds of surface sites active in HO* release and cell transformation: (1) silicon-based radicals, abundant on freshly ground dusts, which generate the HO* radicals without the superoxide ion as intermediate; and (2) isolated iron centers where the Haber-Weiss cycle takes place, with the superoxide ion as intermediate. The activities of both sites are inhibited by mannitol or catalase, whereas only the last one is inhibited by SOD.

Cytotoxic and transforming effects of silica particles with different surface properties in Syrian hamster embryo (SHE) cells.

Several crystalline and amorphous silica dusts (two quartz of natural origin, one cristobalite of natural and two of biogenic origin, three amorphous diatomite earths and one pyrogenic amorphous silica) were studied in the SHE cell transformation assay, in order to compare their cytotoxic and transforming potencies and examine the role of the structure and of the state of the surface on these effects. Some samples were modified by grinding, etching and heating with the aim of establishing relationships between single surface properties and biological responses. The results showed that some quartz and cristobalite dusts (crystalline) as well as the diatomaceous earths (amorphous), but not the pyrogenic amorphous silica, were cytotoxic and induced morphological transformation of SHE cells in a concentration-dependent manner. The ranking in cytotoxicity was different from that in transforming potency, suggesting two separate molecular mechanisms for the two effects. The cytotoxic and transforming potencies were different from one dust to another, even among the same structural silicas. The type of crystalline structure (quartz vs cristobalite) and the crystalline vs biogenic amorphous form did not correlate with cytotoxic or transforming potency of silica dusts. Comparison of cellular effects induced by original and surface modified samples revealed that several surface functionalities modulate cytotoxic and transforming potencies. The cytotoxic effects appeared to be related to the distribution and abundance of silanol groups and to the presence of trace amounts of iron on the silica surface. Silica particles with fractured surfaces and/or iron-active sites, able to generate reactive oxygen species, induced SHE cell transformation. The results show that the activity of silica at the cellular level is sensitive to the composition and structure of surface functionalities and confirm that the biological response to silica is a surface originated phenomenon.

Study of Cell Division Aberrations Induced by Some Silica Dusts in Mammalian Cells in Vitro.

Previously we observed that some crystalline and amorphous (diatomaceous earths) silicas (but not pyrogenic amorphous silica) induced morphological transformation of Syrian hamster embryo (SHE) cells. In order to explore the mechanisms of the silica-induced cell transformation, in this study we have examined the possibility that silica may cause genomic changes by interfering with the normal events of mitotic division. The SHE cells were exposed to transforming samples of Min-U-Sil 5 quartz and amorphous diatomite earth (DE) as well as to inactive amorphous synthetic Aerosil 0X50 at concentrations between 9 and 36 µg/cm(2) of culture slide. Effects on the mitotic spindle and on chromosome congression and segregation through the mitotic stages were concurrently examined by differential and indirect immunofluorescence stainings using anti-ß-tubulin antibody. Min-U-Sil 5 and DE dusts induced a significant increase in the number of aberrant mitotic cells detected by differential staining. Increased frequencies of monopolar mitoses and scattered chromosomes as well as a small incidence of lagging chromosomes in DE-treated cells were observed. The immunostaining was more efficient in the detection of spindle disturbances. Min-U-Sil induced a significantly concentration-dependent increase of monopolar spindles. At the highest concentration, highly disorganized prophase spindles and prometaphase multipolars were observed. These damages caused a concentration-dependent decrease in metaphase to anaphase transition. DE-induced spindle aberrations did not reach significant levels over control, although increase in monopolar and multipolar spindles were recorded. Exposure to OX50 particles did not disrupt spindle integrity. To determine whether micronuclei (MN) arise from divisional abnormalities induced by the active samples, we performed in SHE and human bronchial epithelial cells kinetochore (K)-specific and centromere (C)-specific staining, respectively. A concentration-dependent increase in K(+) and C(+) MN with increase of K(+)/K(-) and C(+)/C(-) MN ratio were induced by Min-U-Sil in both cells systems. The DE sample was positive only in SHE cells. The results suggest that some silicas are potential aneugens by disturbance of cell division, leading to genomic imbalance that can be one of the mechanisms of silica-induced cell transformation.

Facial reflex myoclonus induced by language: a neuropsychological and neurophysiological study.

We studied a 53 year old right-handed patient who presented isolated myoclonus of right facial muscles induced exclusively by language. Twitching significantly hindered speaking and reading performance. MRI and CT-scan revealed no brain lesion. Conventional EEG showed a few spike-waves predominantly in the left hemisphere. Spike-waves increased during drowsiness. An EEG-EMG polygraphic study was performed during stimulation tests which included linguistic tasks and non-verbal/non-linguistic tests. Myoclonus was triggered by speaking and writing but not by non-linguistic tasks. The severity of myoclonus was dependent on the complexity of the language task. Back-averaging of right facial EMG bursts failed to show a reliable EEG-EMG correlation. However, the facial reflex myoclonus might have originated from the left rolandicopercular cortex, as it was triggered by complex language activities. Findings in this case are compared with those reported for other forms of reflex seizure and myoclonus.