Injectable systems of chitosan in situ forming composite gel incorporating linezolid-loaded biodegradable nanoparticles for long-term treatment of bone infections.

The objective of the current study was to create an efficient, minimally invasive combined system comprising in situ forming hydrogel loaded with both spray-dried polymeric nanoparticles encapsulating linezolid and nanohydroxyapatite for local injection to bones or their close vicinity. The developed system was designed for a dual function namely releasing the drug in a sustained manner for long-term treatment of bone infections and supporting bone proliferation and new tissues generation. To achieve these objectives, two release sustainment systems for linezolid were optimized namely a composite in situ forming chitosan hydrogel and spray-dried PLGA/PLA solid nanoparticles. The composite, in situ forming hydrogel of chitosan was prepared using two different gelling agents namely glycerophosphate (GP) and sodium bicarbonate (NaHCO3) at 3 different concentrations each. The spray-dried linezolid-loaded PLGA/PLA nanoparticles were developed using a water-soluble carrier (PVP K30) and a lipid soluble one (cetyl alcohol) along with 3 types of DL-lactide and/or DL-lactide-co-glycolide copolymer using nano-spray-drying technique. Finally, the optimized spray-dried linezolid nanoparticles were incorporated into the optimized composite hydrogel containing nanohydroxy apatite (nHA). The combined hydrogel/nanoparticle systems displayed reasonable injectability with excellent gelation time at 37 °C. The optimum formulae sustained the release of linezolid for 7-10 days, which reveals its ability to reduce the frequency of injection during the course of treatment of bones infections and increase the patients' compliance. They succeeded to alleviate the bone infections and the associated clinical, biochemical, radiological, and histopathological changes within 2-4 weeks of injection. As to the state of art in this study and to the best of our knowledge, no such complete and systematic study on this type of combined in situ forming hydrogel loaded with spray-dried nanoparticles of linezolid is available yet in literatures.

Augmented in vitro and in vivo Profiles of Brimonidine Tartrate Using Gelatinized-Core Liposomes.

Background: The low entrapment efficiency of the hydrophilic drugs such as brimonidine tartrate (BRT) in liposomes represents a challenge that requires interventions. Gelatinized core liposomes (GCLs) were fabricated to increase the drug entrapment, corneal penetration, and physical stability of the investigated molecule. Research Design and Methods: GCLs encapsulating BRT were prepared and optimized utilizing D-optimal design (DOD). The effect of plasticizer incorporation on the physicochemical characteristics and on the in vivo performance was studied. The optimized formulations were investigated for pH, rheological properties, morphological characteristics, in vitro release profiles, biological performance, safety profile. The effects of storage and gamma sterilization were also investigated. Results: The results revealed the great success of the prepared formulations to achieve high entrapment efficiency reaching 98% after a maturation period of 10 days. The addition of glycerol as plasticizer significantly minimized the particle size and shortened the maturation period to 7 days. The selected formulations were stable for 3 months after gamma sterilization. The formulations showed significant lowering of intra-ocular pressure (IOP) in glaucomatous rabbits with sustainment of the pharmacological effect for 24 hours compared to drug solution. Conclusions: Enhanced in vitro and in vivo profiles of brimonidine tartrate loaded gelatinized-core-liposomes were obtained.

Functionalized chitosan nanoparticles for cutaneous delivery of a skin whitening agent: an approach to clinically augment the therapeutic efficacy for melasma treatment.

The increase in the production of melanin level inside the skin prompts a patient-inconvenient skin color disorder namely; melasma. This arouses the need to develop efficacious treatment modalities, among which are topical nano-delivery systems. This study aimed to formulate functionalized chitosan nanoparticles (CSNPs) in gel form for enhanced topical delivery of alpha-arbutin as a skin whitening agent to treat melasma. Ionic gelation method was employed to prepare α-arbutin-CSNPs utilizing a 24 full factorial design followed by In vitro, Ex vivo and clinical evaluation of the nano-dispersions and their gel forms. Results revealed that the obtained CSNPs were in the nanometer range with positive zeta potential, high entrapment efficiency, good stability characteristics and exhibited sustained release of α-arbutin over 24 h. Ex vivo deposition of CSNPs proved their superiority in accumulating the drug in deep skin layers with no transdermal delivery. DSC and FTIR studies revealed the successful amorphization of α-arbutin into the nanoparticulate system with no interaction between the drug and the carrier system. The comparative split-face clinical study revealed that α-arbutin loaded CSNPs hydrogels showed better therapeutic efficacy compared to the free drug hydrogel in melasma patients, as displayed by the decrease in: modified melasma area and severity index (mMASI) scores, epidermal melanin particle size surface area (MPSA) and the number of epidermal monoclonal mouse anti-melanoma antigen recognized by T cells-1 (MART-1) positive cells which proved that the aforementioned system is a promising modality for melasma treatment.

Recent advances in the local antibiotics delivery systems for management of osteomyelitis.

Chronic osteomyelitis is a challenging disease due to its serious rates of mortality and morbidity while the currently available treatment strategies are suboptimal. In contrast to the adopted systemic treatment approaches after surgical debridement in chronic osteomyelitis, local drug delivery systems are receiving great attention in the recent decades. Local drug delivery systems using special carriers have the pros of enhancing the feasibility of penetration of antimicrobial agents to bone tissues, providing sustained release and localized concentrations of the antimicrobial agents in the infected area while avoiding the systemic side effects and toxicity. Most important, the incorporation of osteoinductive and osteoconductive materials in these systems assists bones proliferation and differentiation, hence the generation of new bone materials is enhanced. Some of these systems can also provide mechanical support for the long bones during the healing process. Most important, if the local systems are designed to be injectable to the affected site and biodegradable, they will reduce the level of invasion required for implantation and can win the patients' compliance and reduce the healing period. They will also allow multiple injections during the course of therapy to guard against the side effect of the long-term systemic therapy. The current review presents different available approaches for delivering antimicrobial agents for the treatment of osteomyelitis focusing on the recent advances in researches for local delivery of antibiotics.HIGHLIGHTSChronic osteomyelitis is a challenging disease due to its serious mortality and morbidity rates and limited effective treatment options.Local drug delivery systems are receiving great attention in the recent decades.Osteoinductive and osteoconductive materials in the local systems assists bones proliferation and differentiationLocal systems can be designed to provide mechanical support for the long bones during the healing process.Designing the local system to be injectable to the affected site and biodegradable will reduces the level of invasion and win the patients' compliance.

Glaucoma: Management and Future Perspectives for Nanotechnology-Based Treatment Modalities.

Glaucoma, being asymptomatic for relatively late stage, is recognized as a worldwide cause of irreversible vision loss. The eye is an impervious organ that exhibits natural anatomical and physiological barriers which renders the design of an efficient ocular delivery system a formidable task and challenge scientists to find alternative formulation approaches. In the field of glaucoma treatment, smart delivery systems for targeting have aroused interest in the topical ocular delivery field owing to its potentiality to oppress many treatment challenges associated with many of glaucoma types. The current momentum of nano-pharmaceuticals, in the development of advanced drug delivery systems, hold promises for much improved therapies for glaucoma to reduce its impact on vision loss. In this review, a brief about glaucoma; its etiology, predisposing factors and different treatment modalities has been reviewed. The diverse ocular drug delivery systems currently available or under investigations have been presented. Additionally, future foreseeing of new drug delivery systems that may represent potential means for more efficient glaucoma management are overviewed. Finally, a gab-analysis for the required investigation to pave the road for commercialization of ocular novel-delivery systems based on the nano-technology are discussed.

Eudragit®-S100 Coated PLGA Nanoparticles for Colon Targeting of Etoricoxib: Optimization and Pharmacokinetic Assessments in Healthy Human Volunteers.

AIM: Etoricoxib is a selective inhibitor of COX-2 enzyme. It is proposed as a potent anti-inflammatory drug intended for the control of irritable bowel syndrome. The current work aimed at developing etoricoxib-loaded nanoparticles for colon- targeting. MATERIALS AND METHODS: PLGA nanoparticles were developed via nano-spray drying technique. The D-optimal design was adopted for the investigation of the influence of i) DL-lactide-coglycolide (PLGA) concentration, ii) polyvinylpyrrolidone K30 (PVP K30) concentration and iii) lactide:glycolide ratio in the copolymer chain on the yield%, the encapsulation efficiency (EE%), particle size (PS) and percentage of drug release after 2h (P2h), 4h (P4h) and 12h (P12h). To promote colon targeting of the systems, the best achieved system (M14) was either directly coated with poly(methacrylic acid-co-methyl methacrylate) [Eudragit®-S100] or loaded into hard gelatin capsules and the capsules were coated with poly(methacrylic acid-co-methyl methacrylate) (E-M14C). The pharmacokinetic parameters of etoricoxib following oral administration of E-M14C in healthy volunteers were assessed relative to commercial etoricoxib tablets. RESULTS: M14 system was prepared using PLGA (0.5% w/v) at a lactide:glycolide ratio of 100:0, in the presence of PVP K30 (2% w/v). M14 system was nano-spherical particles of 488 nm size possessing promising yield% (63.5%) and EE% (91.2%). The percentage drug released after 2, 4 and 12 hours were 43.41%, 47.34 and 64.96%, respectively. Following M14-loading into hard gelatin capsules and coating with poly(methacrylic acid-co-methyl methacrylate) [Eudragit-S100], the respective P2h, P4h and P12h were 10.1%, 28.60% and 65.45%. Significant (p < 0.05) differences between the pharmacokinetic parameter of E-M14C in comparison with the commercial product were revealed with a delay in Tmax (from 2.5h to 6h), a prolongation in MRT0-∞ (from 24.4h to 34.7h) and an increase in the relative oral bioavailability (4.23 folds). CONCLUSION: E-M14C is a potential system for possible colon targeting of etoricoxib.

In-situ forming chitosan implant-loaded with raloxifene hydrochloride and bioactive glass nanoparticles for treatment of bone injuries: Formulation and biological evaluation in animal model.

In-situ forming implants receive great attention for repairing serious bone injuries. The aim of the present study was to prepare novel chitosan in-situ forming implants (CIFI) loaded with bioactive glass nanoparticles and/or raloxifene hydrochloride (RLX). Incorporating raloxifene hydrochloride (RLX) as a selective estrogen receptor modulator was essential to make use of its anti-resorptive properties. The prepared formulae were tested for their in-vitro gelation time, drug release, injectability, rheological properties, erosion rate and morphological properties. Results revealed that the formulation composed of 1% (w/v) chitosan with 2% (w/v) NaHCO3 and 1% (w/v) bioactive glass nanoparticles (CIFI-BG) possessed the most sustained drug release profile which extended over four months with low burst release effect compared to the same formulation lacking bioactive glass nanoparticles (CIFI). Selected formulations were tested for their ability to enhance bone regeneration in induced puncture in rate tibia. Results declared that these formulations were able to enhance bone regeneration after 12 weeks in comparison to the untreated tibial punctures and that containing bioactive glass could be considered as novel approach for treatment of serious bone injuries which require long term treatment and internal mechanical bone support during healing.

Long lasting in-situ forming implant loaded with raloxifene HCl: An injectable delivery system for treatment of bone injuries.

Bone injury is very serious in elder people or osteoporotic patients. In-situ forming implants (IFI) for bone rebuilding are usually poly-lactic-co-glycolic acid (PLGA)-based, which have a burst release effect. This study aimed to prepare novel liquid lipid-based PLGA-IFI loaded with raloxifene hydrochloride for prolonged non-surgical treatment of bone injuries by applying solvent-induced phase inversion technique. Labrasol® and Maisine® were added to the selected IFI forming long lasting lipid-based IFI (LLL-IFI). The formulations were characterized by analysing their in-vitro drug release, solidification time, injectability, rheological properties, and DSC in addition to their morphological properties. Results revealed that the LLL-IFI composed of 10%w/v PLGA with a lactide to glycolide ratio of 75:25 with ester terminal and 10% Maisine® possessed the most sustained drug release and lowest burst effect, as well as delayed pore formation compared to its counterpart lacking Maisine®. The selected LLL-IFI and PLGA-IFI formulations were tested for their capability to enhance bone regeneration in bone injuries induced in rats. Both formulations succeeded in healing the bones completely with the superiority of LLL-IFI in the formation of well-organized bone structures lacking fibrous tissues. The results suggest that LLL-IFI and PLGA-IFI are innovative approaches for treating critical and non-critical sized bone injuries.

Clinical cosmeceutical repurposing of melatonin in androgenic alopecia using nanostructured lipid carriers prepared with antioxidant oils.

BACKGROUND: The present work aims to formulate nanostructured lipid carriers (NLCs) exhibiting high skin deposition and high inherent antioxidant potential to repurpose the use of melatonin hormone and some antioxidant oils in the treatment of androgenic alopecia (AGA). RESEARCH DESIGN AND METHODS: NLCs were characterized for their size, charge, drug entrapment, anti-oxidant potential, physical stability, in vitro release, surface morphology, and ex-vivo skin deposition. Their merits were clinically tested on patients suffering from AGA by calculating the degree of improvement, conduction of hair pull test, histometric assessment, and dermoscopic evaluation. RESULTS: Results revealed that melatonin NLCs showed nanometer size, negatively charged surface, high entrapment efficiency, and high anti-oxidant potential, in addition to sustained release for 6 h. Furthermore, NLCs displayed good storage stability and they were able to increase the skin deposition of melatonin 4.5-folds in stratum corneum, 7-folds in epidermis, and 6.8-folds in the dermis compared to melatonin solution. Melatonin NLCs displayed more clinically desirable results compared to the melatonin solution in AGA patients, manifested by increased hair density and thickness and decreased hair loss. CONCLUSIONS: The aforementioned system was shown to be a very promising treatment modality for AGA, which is worthy of futuristic experimentation.

Melatonin vitamin C-based nanovesicles for treatment of androgenic alopecia: Design, characterization and clinical appraisal.

The present study aimed to develop vitamin C based nanovesicles (aspasomes) loaded with the antioxidant melatonin, as a novel cosmeceutical to be used for clinical treatment of androgenic alopecia (AGA). Aspasomes were assessed regarding their particle size, charge, drug entrapment, anti-oxidant potential, physical stability, in vitro release, surface morphology, and ex-vivo skin deposition. Clinically, melatonin aspasomes were tested on AGA patients, and assessed by evaluating the degree of improvement through conduction of hair pull test, histometric analysis and dermoscopic evaluation. Results revealed that melatonin aspasomes showed favorable pharmaceutical properties in addition to clinically promising results compared to melatonin solution, manifested by increased hair thickness, density and decreased hair loss, with photographic improvement in most patients. Therefore, melatonin vitamin C-based aspasomes were clinically auspicious in the treatment of AGA, hence, paving the way for their further exploration in other oxidative-dependent dermatological diseases.

Recent Advances in Antioxidant Cosmeceutical Topical Delivery.

Antioxidants are among the most important cosmeceuticals, with proven ability of inhibiting cellular damage. The topical skin administration of antioxidants is essential for minimizing skin aging and achieving better skin protection against harmful free radicals. However, their unfavorable physiochemical properties such as chemical instability, excessive hydrophilicity or lipophilicity and others could be a great obstacle against their skin promising effects as well as their delivery to deeper skin layers. These problems could all be remedied through the use of delivery carriers. The present review discusses the various delivery carriers which were proven successful in improving the beneficial effects of antioxidants against skin aging, namely different vesicular systems, lipidic systems, polymeric systems and carbon nanotubes, and their applications in topical antioxidant delivery.

Studying the influence of formulation and process variables on Vancomycin-loaded polymeric nanoparticles as potential carrier for enhanced ophthalmic delivery.

Ocular topically applied Vancomycin (VCM) suffers poor bioavailability due to its high molecular weight and hydrophilicity. In the present investigation, VCM-loaded polymeric nanoparticles (PNPs) were developed aiming to enhance its ocular bioavailability through prolonging its release pattern and ophthalmic residence. PNPs were prepared utilizing double emulsion (W/O/O), solvent evaporation technique. 23×41 full factorial design was applied to evaluate individual and combined influences of polymer type, Eudragit® RS100, sonication time, and Span®80 concentration on PNPs particle size, encapsulation efficiency, and zeta potential. Further, the optimized formulae were incorporated in 1% Carbopol®-based gel. In-vivo evaluation of the optimized formulae was performed via Draize test followed by microbiological susceptibility testing on albino rabbits. Results revealed successful formulation of VCM-loaded PNPs was achieved with particle sizes reaching 155nm and up to 88% encapsulation. Draize test confirmed the optimized formulae as non-irritating and safe for ophthalmic administration. Microbiological susceptibility testing confirmed prolonged residence, higher Cmax. with more than two folds increment in the AUC(0.25-24) of VCM-PNPs over control groups. Thus, VCM-loaded PNPs represent promising carriers with superior achievements for enhanced Vancomycin ophthalmic delivery over the traditional use of commercially available VCM parenteral powder after constitution into a solution by the ophthalmologists.

Nanostructured lipid carriers as semisolid topical delivery formulations for diflucortolone valerate.

CONTEXT: Topical treatment of skin disease needs to be strategic to ensure high drug concentration in the skin with minimum systemic absorption. OBJECTIVE: The aim of this study was to produce semisolid nanostructured lipid carrier (NLC) formulations, for topical delivery of the corticosteroid drug, diflucortolone valerate (DFV), with minimum systemic absorption. METHOD: NLC formulations were developed using a high shear homogenization combined with sonication, using Precirol® ATO5 or Tristearin® as the solid lipid, Capryol™ or isopropyl myristate as the liquid lipid and Poloxamer® 407 as surfactant. The present study addresses the influence of different formulations composition as solid lipid, liquid lipid types and concentrations on the physicochemical properties and drug release profile from NLCs. RESULTS AND DISCUSSION: DFV-loaded NLC formulations possessed average particle size ranging from 160.40 nm to 743.7 nm with narrow polydispersity index. The encapsulation efficiency was improved by adding the lipid-based surfactants (Labrasol® and Labrafil® M1944CS) to reach 68%. The drug release from the investigated NLC formulations showed a prolonged release up to 12 h. The dermatopharmacokinetic study revealed an improvement in drug deposition in the skin with the optimized DFV-loaded NLC formulation, in contrast to a commercial formulation. CONCLUSION: NLC provides a promising nanocarrier system that work as reservoir for targeting topical delivery of DFV.

Nanoparticles as tool for enhanced ophthalmic delivery of vancomycin: a multidistrict-based microbiological study, solid lipid nanoparticles formulation and evaluation.

CONTEXT: A microbiological multidistrict-based survey from different Egyptian governorates was conducted to determine the most prevalent causative agents of ocular infections in the Egyptian population. Antibiotic sensitivity testing was then performed to identify the most potent antimicrobial agent. Vancomycin (VCM) proved the highest activity against gram-positive Staphylococcus bacteria, which are the most commonly isolated causative agents of ocular infection. However, topically applied VCM suffers from poor ocular bioavailability because of its high molecular weight and hydrophilicity. OBJECTIVE: The aim of the present study was to develop VCM-loaded solid lipid nanoparticles (SLNs) using water-in-oil-in-water (W/O/W) double emulsion, solvent evaporation technique to enhance ocular penetration and prolong ophthalmic residence of VCM. METHOD: Two consecutive full factorial designs (2(4) followed by 3(2)) were adopted to study the effect of different formulation and process parameters on SLN formulation. The lipid type and structure, polyvinyl alcohol (PVA) molecular weight and concentration, sonication time, as well as lipid:drug ratio were studied as independent variables. The formulated SLN formulae were evaluated for encapsulation efficiency (EE%), particle size (PS), and zeta potential as dependent variables. RESULTS: The statistically-optimized SLN formula (1:1 ratio of glyceryltripalmitate:VCM with 1% low molecular weight PVA and 1 min sonication time) had average PS of 277.25 nm, zeta potential of -20.45, and 19.99% drug encapsulation. Scanning and transmission electron micrographs showed well-defined, spherical, homogenously distributed particles. CONCLUSION: The present study suggests that VCM incorporation into SLNs is successfully achievable; however, further studies with different nanoencapsulation materials and techniques would be valuable for improving VCM encapsulation.

Formulation of ciprofloxacin hydrochloride loaded biodegradable nanoparticles: optimization of technique and process variables.

UNLABELLED: Poly lactic-co-glycolic acid (PLGA 502 H) nanoparticles incorporating ciprofloxacin HCl (CP) were prepared by double emulsion solvent diffusion technique. METHODS: The influence of the application of probe sonication besides the high pressure homogenization in the preparation of the secondary emulsion and its application during the solidification step were studied. Their effect on the particle size, Zeta potential and the percent encapsulation efficiency of the drug (EE %) were investigated. The effect of the addition of polyvinyl alcohol (PVA) during the preparation of the primary emulsion was studied. Moreover, the effect of the addition of 0.1 M sodium chloride and/or adjusting the external and extracting phases to pH 7.4 were investigated. The selected formula was examined using IR, X-ray, DSC and SEM and in vitro drug release. RESULTS: These formulations showed an appropriate particle size ranges between 135.7-187.85 nm, a mean zeta potential ranging from -0.839 to -6.81 mV and a mean EE% which ranged from 35% to 69%. CONCLUSION: The presented data revealed the superiority of using probe sonication besides high pressure homogenization during the formation of secondary emulsion. Moreover, the results indicated that the tested factors had a pronounced significant effect on the EE%.

Inclusion complexes of tadalafil with natural and chemically modified beta-cyclodextrins. I: preparation and in-vitro evaluation.

The aim of this work was to investigate the inclusion complexation between tadalafil, a practically insoluble selective phosphodiesterase-5 inhibitor (PDE5), and two chemically modified beta-cyclodextrins: hydroxypropyl-beta-cyclodextrin (HP-beta-CD) and heptakis-[2,6-di-O-methyl]-beta-cyclodextrin (DM-beta-CD), in comparison with the natural beta-cyclodextrin (beta-CD) in order to improve the solubility and the dissolution rate of the drug in an attempt to enhance its bioavailability. Inclusion complexation was investigated in both the solution and the solid state. The UV spectral shift method indicated guest-host complex formation between tadalafil and the three cyclodextrins (CDs). The phase solubility profiles with all the used CDs were classified as A(p)-type, indicating the formation of higher order complexes. The complexation efficiency values (CE), which reflect the solubilizing power of the CDs towards the drug, could be arranged in the following order: DM-beta-CD>HP-beta-CD>beta-CD. Solid binary systems of tadalafil with CDs were prepared by kneading and freeze-drying techniques at molar ratios of 1:1, 1:3 and 1:5 (drug to CD). Physical mixtures were prepared in the same molar ratios for comparison. Physicochemical characterization of the prepared systems at molar ratio of 1:5 was studied using differential scanning calorimetry (DSC), X-ray diffractometry (XRD), and Fourier-transform infrared spectroscopy (FTIR). The results showed the formation of true inclusion complexes between the drug and both HP-beta-CD and DM-beta-CD using the freeze-drying method at molar ratio of 1:5. In contrast, crystalline drug was detectable in all other products. The dissolution of tadalafil from all the prepared binary systems was carried out to determine the most appropriate CD type, molar ratio, and preparation technique to prepare inclusion complexes to be used in the development of tablet formulation for oral delivery of tadalafil. The dissolution enhancement was increased on increasing the CD proportion in all the prepared systems. Both the CD type and the preparation technique played an important role in the performance of the system. Irrespective of the preparation technique, the systems prepared using HP-beta-CD and DM-beta-CD yielded better performance than the corresponding ones prepared using beta-CD. In addition, the freeze-drying technique showed superior dissolution enhancement than other methods especially when combined with the beta-CD derivatives.