Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 21
Filter
Add more filters











Publication year range
1.
Sci Adv ; 8(19): eabm2422, 2022 May 13.
Article in English | MEDLINE | ID: mdl-35544561

ABSTRACT

A reliable energy storage ecosystem is imperative for a renewable energy future, and continued research is needed to develop promising rechargeable battery chemistries. To this end, better theoretical and experimental understanding of electrochemical mechanisms and structure-property relationships will allow us to accelerate the development of safer batteries with higher energy densities and longer lifetimes. This Review discusses the interplay between theory and experiment in battery materials research, enabling us to not only uncover hitherto unknown mechanisms but also rationally design more promising electrode and electrolyte materials. We examine specific case studies of theory-guided experimental design in lithium-ion, lithium-metal, sodium-metal, and all-solid-state batteries. We also offer insights into how this framework can be extended to multivalent batteries. To close the loop, we outline recent efforts in coupling machine learning with high-throughput computations and experiments. Last, recommendations for effective collaboration between theorists and experimentalists are provided.

2.
Nano Lett ; 21(24): 10538-10546, 2021 Dec 22.
Article in English | MEDLINE | ID: mdl-34889614

ABSTRACT

A major challenge hindering the practical adoption of room-temperature sodium-sulfur batteries (NaSBs) is polysulfide dissolution and shuttling, which results in irreversible capacity decay and low Coulombic efficiencies. In this work, we demonstrate for the first time NaSBs using a ferrocene-derived amorphous sulfurized cyclopentadienyl composite (SCC) cathode. Polysulfide dissolution is eliminated via covalent bonding between the insoluble short-chain sulfur species and carbon backbone. Control experiments with a metal-free composite analogue determined that the iron species in the SCC does not have a significant role in polysulfide anchoring. Instead, the superior electrochemical performance is attributed to sulfur covalently bonded to carbon and the uniform nanoparticulate morphology of the SCC composite. In the carbonate-based electrolyte, a discharge capacity of 795 mAh g(S)-1 was achieved during early cycling at 0.2 C, and high Coulombic efficiencies close to 100% were maintained with capacity retention of 532 and 442 mAh g(S)-1 after 100 and 200 cycles, respectively.

3.
Mater Horiz ; 8(3): 830-853, 2021 Mar 01.
Article in English | MEDLINE | ID: mdl-34821317

ABSTRACT

Beyond current lithium-ion technologies, magnesium-sulfur (Mg-S) batteries represent one of the most attractive battery chemistries that utilize low cost, sustainable, and high capacity materials. In addition to high gravimetric and volumetric energy densities, Mg-S batteries also enable safer operation due to the lower propensity for magnesium dendrite growth compared to lithium. However, the development of practical Mg-S batteries remains challenging. Major problems such as self-discharge, rapid capacity loss, magnesium anode passivation, and low sulfur cathode utilization still plague these batteries, necessitating advanced material design strategies for the cathode, anode, and electrolyte. This review critically appraises the latest research and design principles to address specific issues in state-of-the-art Mg-S batteries. In the process, we point out current limitations and open-ended questions, and propose future research directions for practical realization of Mg-S batteries and beyond.

4.
Nano Lett ; 21(19): 8220-8228, 2021 Oct 13.
Article in English | MEDLINE | ID: mdl-34519512

ABSTRACT

Magnesium bis(hexamethyldisilazide) (Mg(HMDS)2)-based electrolytes are compelling candidates for rechargeable magnesium batteries due to their high compatibility with magnesium metal anode. However, the usual combination of Mg(HMDS)2 with chloride salts limits their practical application due to severe corrosion of cell components and low anodic stability. Herein, we report for the first time, a chloride-free Mg(HMDS)2-based electrolyte in 1,2-dimethoxyethane. By chemically controlling the moisture content using tetrabutylammonium borohydride as a moisture scavenger, the electrolyte demonstrates outstanding electrochemical performance in magnesium plating/stripping, with an average Coulombic efficiency of 98.3% over 150 cycles, and is noncorrosive to cell components. Surface analysis and depth profiling of the magnesium metal anode reveals the formation of a robust solid electrolyte interphase at the anode-electrolyte nanointerface, which allows magnesium plating/stripping to occur reversibly. The electrolyte also demonstrates good compatibility with a copper sulfide nanomaterial cathode, which exhibits a high initial discharge capacity of 261.5 mAh g-1.

5.
Nano Lett ; 21(12): 5401-5408, 2021 Jun 23.
Article in English | MEDLINE | ID: mdl-34125537

ABSTRACT

Room-temperature sodium-sulfur batteries have potential in stationary applications, but challenges such as loss of active sulfur and low electrical conductivity must be solved. Nitrogen-doped nanocarbon host cathodes have been employed in metal-sulfur batteries: polar interactions mitigate the loss of sulfur, while the conductive nanostructure addresses the low conductivity. Nevertheless, these two properties run contrary to each other as greater nitrogen-doping of nanocarbon hosts is associated with lower conductivity. Herein, we investigate the polarity-conductivity dilemma to determine which of these properties have the stronger influence on cycling performance. Lower carbonization temperatures produce more pyridinic nitrogen and pyrrolic nitrogen, which from density functional theory calculations preferentially bind discharge products (Na2S and short-chain polysulfides). Despite its lower conductivity, the highly doped composite showed better Coulombic efficiency and stability, retaining a high capacity of 980 mAh g(S)-1 after 800 cycles. Our findings represent a paradigm shift where nitrogen-doping should be prioritized in designing shuttle-free, long-life sodium-sulfur batteries.

6.
ACS Nano ; 14(1): 1148-1157, 2020 Jan 28.
Article in English | MEDLINE | ID: mdl-31834779

ABSTRACT

Rechargeable lithium-sulfur batteries have attracted tremendous scientific attention owing to their high energy density. However, their practical application is greatly hindered by the notorious shuttling of soluble lithium polysulfide (LPS) intermediates with sluggish redox reactions and uncontrolled precipitation behavior. Herein, we report a semiliquid cathode composed of an active LPS solution/carbon nanofiber (CNF) composite layer, capped with a carbon nanotube (CNT) thin film decorated with metallic Mo nanoclusters that regulate the electrochemical redox reactions of LPS. The trace amount (0.05 mg cm-2) of metallic Mo on the CNT film provides sufficient capturing centers for the chemical immobilization of LPS. Together with physical blocking of LPS by the compact CNT film, free diffusion of LPS is significantly restrained and the self-discharge behavior of the Li-S cell is thus effectively suppressed. Importantly, the metallic Mo nanoclusters enable fast catalytic conversion of LPS and regular deposition of lithium sulfide. As a result, the engineered cathode exhibits a high active sulfur utilization (1401 mAh g-1 at 0.1 C), stable cycling (500 cycles at 1 C with 0.06% decay per cycle), high rate performance (694 mAh g-1 at 5 C), and low self-discharge rate (3% after 72 h of rest). Moreover, a high reversible areal capacity of 4.75 mAh cm-2 is maintained after 100 cycles at 0.2 C for a cathode with a high sulfur loading of 7.64 mg cm-2. This work provides significant insight into the structural and materials design of an advanced sulfur-based cathode that effectively regulates the electrochemical reactions of sulfur species in high-energy Li-S batteries.

7.
ACS Appl Mater Interfaces ; 9(14): 12563-12573, 2017 Apr 12.
Article in English | MEDLINE | ID: mdl-28355055

ABSTRACT

Beyond graphene, transitional metal dichalcogenides, and black phosphorus, there are other layered materials called metal thiophosphites (MPSx), which are recently attracting the attention of scientists. Here we present the synthesis, structural and morphological characterization, magnetic properties, electrochemical performance, and the calculated density of states of different layered metal thiophosphite materials with a general formula MPSx, and as a result of varying the metal component, we obtain CrPS4, MnPS3, FePS3, CoPS3, NiPS3, ZnPS3, CdPS3, GaPS4, SnPS3, and BiPS4. SnPS3, ZnPS3, CdPS3, GaPS4, and BiPS4 exhibit only diamagnetic behavior due to core electrons. By contrast, trisulfides with M = Mn, Fe, Co, and Ni, as well as CrPS4, are paramagnetic at high temperatures and undergo a transition to antiferromagnetic state on cooling. Within the trisulfides series the Néel temperature characterizing the transition from paramagnetic to antiferromagnetic phase increases with the increasing atomic number and the orbital component enhancing the total effective magnetic moment. Interestingly, in terms of catalysis NiPS3, CoPS3, and BiPS4 show the highest efficiency for hydrogen evolution reaction (HER), while for the oxygen evolution reaction (OER) the highest performance is observed for CoPS3. Finally, MnPS3 presents the highest oxygen reduction reaction (ORR) activity compared to the other MPSx studied here. This great catalytic performance reported for these MPSx demonstrates their promising capabilities in energy applications.

8.
ACS Nano ; 11(2): 1789-1797, 2017 02 28.
Article in English | MEDLINE | ID: mdl-28094511

ABSTRACT

Graphene oxide is an oxidized form of graphene containing a large variety of oxygen groups. Although past models have suggested carboxylic acids to be present in significant amounts, recent evidence has shown otherwise. Toward the production of carboxyl-graphene, a synthetic method is presented herein based on the Kolbe-Schmitt process. A modified procedure of heating graphite oxide in the presence of a KOH/CaO mixture results in up to 11 atom % of carboxylic groups. The graphite oxide starting material and reaction temperature were investigated as two important factors, where a crumpled morphology of graphite oxide flakes and a lower 220 °C temperature preferentially led to greater carboxyl functionalization. Successful carboxylation caused a band gap opening of ∼2.5 eV in the smallest carboxyl-graphene particles, which also demonstrated a yellow fluorescence under UV light unseen in its counterpart produced at 500 °C. These results are in good agreement with theoretical calculations showing band gap opening and spin polarization of impurity states. This demonstrates the current synthetic process as yet another approach toward tuning the physical properties of graphene.

9.
Anal Chem ; 88(20): 10074-10079, 2016 Oct 18.
Article in English | MEDLINE | ID: mdl-27709884

ABSTRACT

Black phosphorus is an emerging layered material. Its nanoparticles show an increased bandgap when compared to bulk materials and they are typically fabricated by ultrasonication of macroscopic black phosphorus crystals. Here we fabricate black phosphorus nanoparticles (BP NPs) by solution based electrochemical exfoliation with bipolar electrodes, which induces opposite potentials on the opposite ends of black phosphorus macroparticles thereby leading to its decomposition into nanoparticles. BP NPs have enhanced catalytic effect on the hydrogen evolution reaction (HER) relative to black phosphorus macroparticles. We utilize black phosphorus nanoparticles as electrocatalytic tags in a competitive immunoassay for rabbit immunoglobulin G (IgG) detection. The detection signal is produced via nanoimpacts of the BP NPs followed by HER catalysis.

10.
Chem Soc Rev ; 45(9): 2458-93, 2016 05 07.
Article in English | MEDLINE | ID: mdl-27052352

ABSTRACT

The electrochemistry of graphene and its derivatives has been extensively researched in recent years. In the aspect of graphene preparation methods, the efficiencies of the top-down electrochemical exfoliation of graphite, the electrochemical reduction of graphene oxide and the electrochemical delamination of CVD grown graphene, are currently on par with conventional procedures. Electrochemical analysis of graphene oxide has revealed an unexpected inherent redox activity with, in some cases, an astonishing chemical reversibility. Furthermore, graphene modified with p-block elements has shown impressive electrocatalytic performances in processes which have been historically dominated by metal-based catalysts. Further progress has also been achieved in the practical usage of graphene in sensing and biosensing applications. This review is an update of our previous article in Chem. Soc. Rev. 2010, 39, 4146-4157, with special focus on the developments over the past two years.

11.
Phys Chem Chem Phys ; 18(14): 9673-81, 2016 Apr 14.
Article in English | MEDLINE | ID: mdl-26998537

ABSTRACT

The majority of supercapacitor research studies on graphene materials today have been based upon developing electrochemical double-layer capacitors (EDLCs) using reduced graphenes. In contrast, graphene oxide (GO) is often neglected as a supercapacitor candidate due to its low electrical conductivity and surface area. Nonetheless, we present herein a fast (1 h) labelling of GO with o-phenylenediamine (PD) to produce PD-GO, exploiting inherent oxygen groups in creating new functionalities that exhibit capacitive enhancement from pseudo-capacitance. A high specific capacitance of 191 F g(-1) was obtained (at 0.2 A g(-1)), comparable to recent binder-free graphene supercapacitors. The large surface-normalized capacitance of up to 628 µF cm(-2) is also many times greater than the intrinsic capacitance of single-layer graphene (21 µF cm(-2)) as a result of additional pseudo-capacitance. A high capacity retention of ∼85% with each 10-fold increase in current density further indicates excellent rate performance. Hence, this approach in enhancing GO pseudo-capacitance may be similarly feasible as graphene EDLCs. Additionally, PD-GO was also found to exhibit a bright green fluorescence with a 540 nm maximum. The strongest fluorescence intensities arose from the smallest PD-GO fragments, and we attribute the origin to localised sp(2) domains and newly formed phenazine edge groups. The dual enhancement of dissimilar properties such as capacitance and fluorescence emphasizes the continued significance of covalent functionalisation towards tuning of properties in graphene-type materials.

12.
Chemphyschem ; 17(4): 481-8, 2016 Feb 16.
Article in English | MEDLINE | ID: mdl-26774082

ABSTRACT

Graphitic carbon nitride (g-C3 N4 ), synthesised by pyrolysis of different precursors (dicyandiamide, melamine and urea) under varying reaction conditions (air and nitrogen gas) is subjected to electrochemical studies for the elucidation of the inherent catalytic efficiency of the pristine material. Contrary to popular belief, pristine g-C3 N4 shows negligible, if any, enhancement in its electrochemical behaviour in this comprehensive study. Voltammetric analysis reveals g-C3 N4 to display similar catalytic efficiency to the unmodified glassy carbon electrode surface on which the bulk material was deposited. This highlights the non-catalytic nature of the pristine material and challenges the feasibility of using g-C3 N4 as a heterogeneous catalyst to deliver numerous promised applications.

13.
Nanoscale ; 7(47): 20256-66, 2015 Dec 21.
Article in English | MEDLINE | ID: mdl-26579848

ABSTRACT

Chemical modification and functionalization of inherent functional groups within graphite oxide (GO) are essential aspects of graphene-based nano-materials used in wide-ranging applications. Despite extensive research, there remains some discrepancy in its structure, with current knowledge limited primarily to spectroscopic data from XPS, NMR and vibrational spectroscopies. We report herein an innovative electrochemistry-based approach. Four electroactive labels are chosen to selectively functionalize groups in GO, and quantification of each group is achieved by voltammetric analysis. This allows for the first time quantification of absolute amounts of each group, with a further advantage of distinguishing various carbonyl species: namely ortho- and para-quinones from aliphatic ketones. Intrinsic variations in the compositions of permanganate versus chlorate-oxidized GOs were thus observed. Principal differences include permanganate-GO exhibiting substantial quinonyl content, in comparison to chlorate-GO with the vast majority of its carbonyls as isolated ketones. The results confirm that carboxylic groups are rare in actuality, and are in fact entirely absent from chlorate-GO. These observations refine and advance our understanding of GO structure by addressing certain disparities in past models resulting from employment of different oxidation routes, with the vital implication that GO production methods cannot be used interchangeably in the manufacture of graphene-based devices.

15.
Chemistry ; 21(47): 16828-38, 2015 Nov 16.
Article in English | MEDLINE | ID: mdl-26457373

ABSTRACT

Interest in chemical functionalisation of graphenes today is largely driven by associated changes to its physical and material properties. Functionalisation with hydrogen was employed to obtain hydrogenated graphenes (also termed graphane if fully hydrogenated), which exhibited properties including fluorescence, magnetism and a tuneable band gap. Although the classical Birch reduction has been employed for hydrogenation of graphite oxide, variation exists between the choice of alkali metals and alcohols/water as quenching agents. A systematic study of electron (Li, Na, K, Cs) and proton sources (tBuOH, iPrOH, MeOH, H2O) has been performed to identify optimal conditions. The proton source exerted a great influence on the resulting hydrogenation with water and out-performed alcohols, and the lowest carbon-to-hydrogen ratio was observed with sodium and water with composition of C1.4H1O0.3. Although ferromagnetism at room temperature correlates well with increasing hydrogen concentrations, small contributions from trace iron impurities cannot be completely eliminated. In contrast, hydrogenated graphenes exhibit a significant paramagnetic moment at low temperatures that has no correlation with impurities, and therefore, originates from the carbon system. This is in comparison to graphene, which is strongly diamagnetic, and concentrations of paramagnetic centres in hydrogenated graphenes are one order of magnitude larger than that in graphite. Nonetheless, hydrogenation over a particular level might also excessively disrupt intrinsic sp(2) conjugation, resulting in unintended reduction of electrochemical properties. This was observed with heterogeneous electron-transfer rates and it was postulated that hydrogenated graphenes should generally have high defect densities, but only moderately high hydrogenation, should they be employed as electrode materials.

16.
Chemphyschem ; 16(9): 1898-905, 2015 Jun 22.
Article in English | MEDLINE | ID: mdl-25908556

ABSTRACT

Renewable energy sources are highly sought after as a result of numerous worldwide problems concerning the environment and the shortage of energy. Currently, the focus in the field is on the development of catalysts that are able to provide water splitting catalysis and energy storage for the hydrogen evolution reaction (HER). While platinum is an excellent material for HER catalysis, it is costly and rare. In this work, we investigated the electrocatalytic abilities of various graphene-metal hybrids to replace platinum for the HER. The graphene materials were doped with 4f metals, namely, iridium, osmium, platinum and rhenium, as well as 3d metals, namely, cobalt, iron and manganese. We discovered that a few hybrids, in particular iridium- and osmium-doped graphenes, have the potential to become competent electrocatalysts owing to their low costs and-more importantly-to their promising electrochemical performances towards the HER. One of the more noteworthy observations of this work is the superiority of these two hybrids over MoS2 , a well-known electrocatalyst for the HER.

17.
ACS Nano ; 8(12): 12185-98, 2014 Dec 23.
Article in English | MEDLINE | ID: mdl-25453501

ABSTRACT

Beyond MoS2 as the first transition metal dichalcogenide (TMD) to have gained recognition as an efficient catalyst for the hydrogen evolution reaction (HER), interest in other TMD nanomaterials is steadily beginning to proliferate. This is particularly true in the field of electrochemistry, with a myriad of emerging applications ranging from catalysis to supercapacitors and solar cells. Despite this rise, current understanding of their electrochemical characteristics is especially lacking. We therefore examine the inherent electroactivities of various chemically exfoliated TMDs (MoSe2, WS2, WSe2) and their implications for sensing and catalysis of the hydrogen evolution and oxygen reduction reactions (ORR). The TMDs studied are found to possess distinctive inherent electroactivities and together with their catalytic effects for the HER are revealed to strongly depend on the chemical exfoliation route and metal-to-chalcogen composition particularly in MoSe2. Despite its inherent activity exhibiting large variations depending on the exfoliation procedure, it is also the most efficient HER catalyst with a low overpotential of -0.36 V vs RHE (at 10 mA cm(-2) current density) and fairly low Tafel slope of ∼65 mV/dec after BuLi exfoliation. In addition, it demonstrates a fast heterogeneous electron transfer rate with a k0obs of 9.17×10(-4) cm s(-1) toward ferrocyanide, better than that seen for conventional glassy carbon electrodes. Knowledge of TMD electrochemistry is essential for the rational development of future applications; inherent TMD activity may potentially limit certain purposes, but intended objectives can nonetheless be achieved by careful selection of TMD compositions and exfoliation methods.

18.
Chemistry ; 20(46): 14946-50, 2014 Nov 10.
Article in English | MEDLINE | ID: mdl-25293511

ABSTRACT

A novel concept of an iridium-based bubble-propelled Janus-particle-type graphene micromotor with very high surface area and with very low catalyst loading is described. The low loading of Ir catalyst (0.54 at %) allows for fast motion of graphene microparticles with high surface area of 316.2 m(2) g(-1). The micromotor was prepared with a simple and scalable method by thermal exfoliation of iridium-doped graphite oxide precursor composite in hydrogen atmosphere. Oxygen bubbles generated from the decomposition of hydrogen peroxide at the iridium catalytic sites provide robust propulsion thrust for the graphene micromotor. The high surface area and low iridium catalyst loading of the bubble-propelled graphene motors offer great possibilities for dramatically enhanced cargo delivery.


Subject(s)
Graphite/chemistry , Catalysis , Hydrogen/chemistry , Hydrogen Peroxide/chemistry , Iridium/chemistry , Models, Molecular , Motion , Oxides/chemistry , Oxygen/chemistry , Particle Size
19.
Chemistry ; 19(46): 15583-92, 2013 Nov 11.
Article in English | MEDLINE | ID: mdl-24123303

ABSTRACT

Hydrogenated graphenes exhibit a variety of properties with potential applications in devices, ranging from a tunable band gap to fluorescence, ferromagnetism, and the storage of hydrogen. We utilize a one-step microwave-irradiation process in hydrogen plasma to create highly hydrogenated graphene from graphite oxides. The procedure serves the dual purposes of deoxygenation and concurrent hydrogenation of the carbon backbone. The effectiveness of the hydrogenation process is investigated on three different graphite oxides (GOs), which are synthesized by using the Staudenmaier, Hofmann, and Hummers methods. A systematic characterization of our hydrogenated graphenes is performed using UV/Vis spectroscopy, SEM, AFM, Raman spectroscopy, FTIR spectroscopy, X-ray photoelectron spectroscopy (XPS), combustible elemental analysis, and electrical conductivity measurements. The highest hydrogenation extent is observed in hydrogenated graphene produced from the Hummers-method GO, with a hydrogen content of 19 atomic % in the final product. In terms of the removal of oxygen groups, microwave exfoliation yields graphenes with very similar oxygen contents despite differences in their parent GOs. In addition, we examine the prospective application of hydrogenated graphenes as electrochemical transducers through a cyclic voltammetry (CV) study. The highly hydrogenated graphenes exhibit fast heterogeneous electron-transfer rates, suggestive of their suitability for electrochemical applications in electrodes, supercapacitors, batteries, and sensors.

20.
Chemistry ; 19(38): 12673-83, 2013 Sep 16.
Article in English | MEDLINE | ID: mdl-23934966

ABSTRACT

Graphene and graphene oxides are materials of significant interest in electrochemical devices such as supercapacitors, batteries, fuel cells, and sensors. Graphene oxides and reduced graphenes are typically prepared by oxidizing graphite in strong mineral acid mixtures with chlorate (Staudenmaier, Hofmann) or permanganate (Hummers, Tour) oxidants. Herein, we reveal that graphene oxides pose inherent electrochemistry, that is, they can be oxidized or reduced at relatively mild potentials (within the range ±1 V) that are lower than typical battery potentials. This inherent electrochemistry of graphene differs dramatically from that of the used oxidants. Graphene oxides prepared using chlorate exhibit chemically irreversible reductions, whereas graphene oxides prepared through permanganate-based methods exhibit very unusual inherent chemically reversible electrochemistry of oxygen-containing groups. Insight into the electrochemical behaviour was obtained through cyclic voltammetry, chronoamperometry, and X-ray photoelectron spectroscopy experiments. Our findings are of extreme importance for the electrochemistry community as they reveal that electrode materials undergo cyclic changes in charge/discharge cycles, which has strong implications for energy-storage and sensing devices.

SELECTION OF CITATIONS
SEARCH DETAIL