ABSTRACT
A micro-ring resonator structure was fabricated via the two-photon polymerization technique directly on a single-mode fiber tip and tested for refractive index sensing application. The micro-ring structure was used to excite whispering-gallery modes, and observations of the changes in the resonance spectrum introduced by changes in the refractive index of the environment served as the sensing principle. The proposed structure has the advantages of a very simple design, allowing for measurements in reflection mode, relatively easy and fast fabrication and integration with a single tip of a standard single-mode fiber, which allowed for quick and convenient measurements in the optical setup. The performance of the structure was characterized, and the resonant spectrum giving high potential for refractive index sensing was measured. Future perspectives of the research are addressed.
ABSTRACT
In this paper, we demonstrate the first ever dual-period diffraction gratings that do not require electrical tuning to obtain the effect of period change. Our method allows for multiplication of the base period by proper modification of the subsequent slits of the grating. The proposed elements are fabricated by selective photopolymerization of a composite based on a nematic liquid crystal. The gratings are formed by polymer stabilization of a liquid crystal in different orientations of the molecules in selected grating slits to allow for period manipulation. The operating principle is based on changing the phase delay introduced by the slits depending on polarization direction of incident light with respect to the director in each type of slit, which allows to change the grating's period. The proposed technique was successfully utilized to obtain diffraction gratings with either doubling or tripling of the period.
ABSTRACT
In this paper we present all-in fiber tunable devices based on specially designed and optimized high-index photonic crystal fibers filled with nematic liquid crystals. A special host microstructured optical fibers have been designed and manufactured to ensure low-loss index guiding and mode field diameter matching to SMF-28 fiber, ensuring low losses on interconnections with leading in-out FC/PC connectorized pigtails. We present four types of tunable all-fiber devices: tunable retarders with tuning range as high as 20 λ, tunable polarizers with variable axis of polarization and continuously tunable polarization dependent losses, tunable and fully controllable polarization controller and finally indeterministic depolarizer in which depolarization is caused by random thermodynamic process. We also present a cost-effective method to achieve change in the direction of the steering electric field, which was controlled by custom-made programable controllers. Finally, we present a method for effective packaging for the proposed devices.
ABSTRACT
Different methods allowing for creating optical waveguides with liquid-crystal (LC) cores, in which molecules form periodic patterns with precisely controlled periods, are reported. The first one is based on reversible photoalignment with high-resolution selective illumination and allows to control the period of LC molecules inside silica microcapillaries. The second method employs microstructures formed in PDMS, allowing to obtain both: LC-core waveguides and a set of specially designed periodic microelectrodes used for the periodic reorientation of molecules. Using both methods, we successfully controlled the period of the patterned alignment in the range from about 500 µm and scaled it down to as small as 20 µm. We performed experimental studies on waveguiding phenomenon in such structures, in view to obtain transmission spectra typical to optical fiber gratings. Since the results achieved in experimental conditions differed from those expected, the additional numerical simulations were performed to explain the observed effects. Finally, we obtained the waveguiding in a blue phase LC, characterized by naturally created three-dimensional periodicity with periods smaller than one micrometer. In such a structure, we were able to observe first-order bandgap, and moreover, we were able to tune it thermally in nearly the whole visible spectral range.
ABSTRACT
Experimental investigations of microstructured fibers filled with liquid crystals (LCs) have so far been performed only by using host fibers made of the silica glass. In this paper, the host photonic crystal fiber (PCF) was made of the PBG08 high-refractive index glass (approximately 1.95) that is much higher than silica glass index (approximately 1.46) and also higher then both ordinary and extraordinary refractive indices of the majority of LCs. As a result, low-loss and index-guiding propagation is observed regardless of the LC molecules orientation. Attenuation of the host PCF was measured to be approximately 0.15 dB/cm and for the PCF infiltrated with 5CB LC was slightly higher (approximately 0.19 dB/cm), resulting in a significant reduction to approximately 0.04 dB/cm of the scattering losses caused by the LC. Moreover, an external transverse electric field applied to the effective photonic liquid crystal fiber (PLCF) allowed for continuous phase birefringence tuning from 0 to 2.10(-4).
