ABSTRACT
While plant toxicity reduction remains the primary metric for judging the success of metal immobilization in soil, the suitability of microorganisms as universal indicators of its effectiveness in various contaminated soils remains a point of contention. This study assessed the sensitivity of microbial bioindicators in monitoring metal immobilization success in smelter-impacted soils. It compared plants and microorganisms as indicators of the efficiency of natural Fe-Mn nodules from the Gulf of Finland in immobilizing metals in soils contaminated by a Ni/Cu smelter, on the Kola Peninsula, Murmansk region, Russia. Perennial ryegrass (Lolium perenne) was grown on nodule-amended and control soils. Plant responses in the smelter-impacted soils proved to be sensitive and robust indicators of successful metal immobilization. However, microbial responses exhibited a more complex story. Despite the observed reductions in soluble metal concentrations, shoot metal contents in ryegrass, and significant improvements in plant growth, certain microbial bioindicators were unresponsive to metal immobilization success brought about by the addition of Fe-Mn nodules. Among microbial bioindicators studied, community-level physiological profiling, microbial biomass carbon, and basal respiration were sensitive indicators of metal immobilization success, whereas the number of saprotrophic, oligotrophic, and Fe-oxidizing bacteria and fungi, the biomass of bacteria and fungi, and enzymatic activity were less robust indicators. Interestingly, the correlations between different microbial responses measured were weak or even negative. Some microbial responses also exhibited negative correlations with plant biomass. These findings underscore the need for further research on comparative evaluations of plants and microorganisms as reliable indicators of metal immobilization efficacy in polluted environments.
Subject(s)
Lolium , Soil Microbiology , Soil Pollutants , Soil , Soil Pollutants/analysis , Soil Pollutants/metabolism , Lolium/metabolism , Soil/chemistry , Metals/metabolism , Metals/analysis , Bacteria/metabolism , Biodegradation, Environmental , Russia , Fungi/metabolism , Environmental Monitoring/methods , Finland , Biological Monitoring/methodsABSTRACT
Mercury (Hg) stable isotope ratios supplemented by Hg solid speciation data were determined in soils in a former Fe-Hg mining/smelting area (Jedová hora, Czech Republic, Central Europe). The dominant Hg phase in the studied soils was found to be cinnabar (HgS). A secondary form of soil Hg(II) was represented by Hg weakly and strongly bound to mineral (micro)particles, as revealed by thermo-desorption analysis. These Hg species probably play a key role in local soil Hg processes and biogeochemical cycling. The Hg isotopic data generally showed small differences between HgS (-1.1 to -0.8; δ202Hg) and the soil samples (-1.4 to -0.9; δ202Hg), as well as limited isotopic variability within the two studied soil profiles. On the other hand, the detected negative δ202Hg shift (â¼0.4) in organic horizons compared to mineral soils in the highly contaminated profile suggests the presence of secondary post-depositional Hg processes, such as sorption or redox changes. For the less contaminated profile, the observed Hg isotopic variation (â¼0.3; δ202Hg) in the subsurface mineral soil compared to both overlying and underlying horizons is likely due to cyclic redox reactions associated with Hg isotopic fractionation. We assume that the adsorption of Hg(II) to secondary Fe(III)/Mn(III,IV)-oxides could be of major importance in such cases.
Subject(s)
Environmental Monitoring , Iron , Mercury , Mining , Soil Pollutants , Soil , Mercury/analysis , Mercury/chemistry , Soil Pollutants/analysis , Soil Pollutants/chemistry , Soil/chemistry , Environmental Monitoring/methods , Czech Republic , Iron/chemistry , Iron/analysis , Mercury Isotopes/analysis , Mercury CompoundsABSTRACT
Mining and processing of ores in arid (desert) areas generates high amounts of dust, which might be enriched in potentially harmful elements. We studied dust fractions of ores, soils, and technological materials from mining and related hydrometallurgical operation at former Skorpion Zinc non-sulfide Zn deposit in southern Namibia (closed and placed under maintenance in 2020). Chemical and mineralogical investigation was combined with oral bioaccessibility testing of fine dust fractions (<48 µm and <10 µm) in simulated gastric fluid (SGF) to assess potential risk of intake of metallic contaminants (Cd, Cu, Pb, Zn) for staff operating in the area. The bulk metals concentrations were largely variable and ranked as follows: soils < tailings ⪠Skorpion ores < imported ores and dross used for feed ore blending. Maximum contaminant concentrations in the original granular materials were 927 mg Cd/kg, 9150 mg Cu/kg, 50 g Pb/kg and 706 g Zn/kg, respectively, and generally increased as a function of decreasing grain size. The highest bioaccessible concentrations of Cd and Pb yielded imported ores from Taiwan and Turkey and, together with the milled dross, these samples also exhibited the highest Zn bioaccessibilities. The exposure estimates calculated for a worker (weighing 70 kg) in this mining/ore processing operation at a dust ingestion rate of 100 mg/day indicated that most dust samples (soils, tailings, Skorpion ores) exhibited metals intake values far below tolerable daily intake limits. The overall health risk was limited in all mining and ore processing areas except for the ore blending area, where imported ores and recycled dross enriched in bioaccessible Cd, Pb and/or Zn were used for the ore blending. Safety measures required by the mine operator (wearing of masks by the operating staff) helped to prevent the staff's exposure to potentially contaminated dust even in this blending ore area.
Subject(s)
Metals, Heavy , Soil Pollutants , Humans , Environmental Monitoring , Dust/analysis , Cadmium , Lead , Soil Pollutants/analysis , Soil , Zinc , Metals, Heavy/analysisABSTRACT
Here, for the first time, we report the concentrations and isotopic data of Ag in a variety of ore and metallurgical samples and forest soils that have been polluted due to Ag-Pb smelter emissions. Similar to the Ag concentrations, we identified a large range of δ109Ag values (from -0.8 to +2.4), a â¼3 spread, within the primary and secondary materials (i.e., galena, fly ash, slag and matte). This phenomenon, however, is evidently unrelated to Ag isotopic fractionation during the smelting process, but it reflects the starting 109Ag/107Ag signal in ore mineral and/or the specific type of ore genesis. The two studied soil profiles differed in Ag isotopic composition, but on the other hand, they consistently showed significantly lighter Ag (≤+0.8) of metallurgical origin in the upper horizons compared to the bottom horizons and bedrocks, with low Ag amounts depleted of 107Ag (≤+2.9). This isotopic pattern can be attributed to a ternary mixing relationship involving two major anthropogenic Ag components and a minor contribution from geogenic Ag. Accordingly, we did not observe any post-depositional isotopic fractionation in our soils, since Ag was geochemically stable and it was not subjected to leaching. In summary, the Ag isotopes have a potential to trace variations in anthropogenic phases, to monitor specific geochemical processes, and are clearly applicable as anthropogenic Ag source and Ag load proxies.
Subject(s)
Environmental Monitoring , Silver , Isotopes/analysis , Minerals , Soil/chemistryABSTRACT
Compared to compliance leaching tests performed on granular materials, leaching experiments on monolithic slags are more suitable for predicting the contaminant release when large boulders or poured slag layers are submerged in water, a specific environmental scenario typical for many smelting sites. We conducted EN 15863 dynamic monolithic leaching tests on massive copper slags over a prolonged period of 168 d. The patterns of the major contaminant (Cu, Co) fluxes indicated an initial diffusion process followed by the dissolution of primary sulfides with the maximum cumulative releases attaining 75.6 mg/m2 Cu and 4.20 mg/m2 Co. A multi-method mineralogical investigation showed that lepidocrocite (γ-FeOOH) and goethite (α-FeOOH) started to form on the slag surface already after 9 d of leaching and partly immobilized Cu (but not Co). Vanadium and other trace elements (Zn, Pb, Cd) were leached to a much lower extent, initially controlled by diffusion followed by depletion and/or sorption to Fe oxyhydroxides. The results of the long-term leaching of the monolithic slag provide new information about the key processes affecting the release of metal (loid) contaminants under specific submerged conditions and have implications for the environmental management of slag disposal sites and/or potential reuse of slags in civil engineering.
Subject(s)
Copper , Trace Elements , MetalsABSTRACT
Extensive mining and smelting contributed to the declining quality of Luanshya soils. The local smelter was the epicenter of contamination as shown by a spatial distribution analysis. Closeby soil profiles smelter exhibit extremely high Cu concentrations (up to 46,000 mg kg-1 Cu) relative to deeper layers where only background levels of trace elements were observed. A remote profile did not exhibit significant contamination. Lead isotopic ratios revealed that Pb contamination in the Luanshya soils was not smelter-derived. It was shown in this way that the historical usage of leaded gasoline was the main source of this metal. Although the Luanshya smelter also produced Co, this metal was not an important contaminant. Copper leaching was a concern in Luanshya. Upwards of 52 % of Cu was extractable in the exchangeable step of a sequential extraction procedure (SEP), but only for samples where Cu concentrations were high, suggesting that Cu was released exclusively from anthropogenic particles. This was supported by the SEP results for similar depths at the remote soil, where only a small fraction of Cu was labile (5.6 %). Lead and Co were strongly bound in the soils throughout. The excess of Cu in the topsoils was mostly bound in smelter-derived particles. These appeared as spherical fast-cooled droplets composed mostly of sulfides, oxides, and glass. X-ray diffraction and electron probe microanalysis of those particles allowed for a phase classification. Compositions were regularly not stoichiometric so most particles were classified as intermediate solid solutions. However, molecular proportions often closely resembled those of bornite, chalcanthite, cuprospinel, covellite, delafossite, diginite, or hydrous ferric oxides. Concentrations of Cu were often 100 % near the center of the particles indicating an inefficient smelting process. Weathering to some degree was common, which in conjunction with the susceptibility of Cu leaching was highly alarming.
ABSTRACT
We studied the dust fractions of the smelting slag, mine tailings, and soil from the former Ni-Cu mining and processing district in Selebi-Phikwe (eastern Botswana). Multi-method chemical and mineralogical investigations were combined with oral bioaccessibility testing of the fine dust fractions (<48 and <10 µm) in a simulated gastric fluid to assess the potential risk of the intake of metal(loid)s contaminants. The total concentrations of the major contaminants varied significantly (Cu: 301-9,600 mg/kg, Ni: 850-7,000 mg/kg, Co: 48-791 mg/kg) but were generally higher in the finer dust fractions. The highest bioaccessible concentrations of Co, Cu, and Ni were found in the slag and mine tailing dusts, where these metals were mostly bound in sulfides (pentlandite, pyrrhotite, chalcopyrite). On the contrary, the soil dusts exhibited substantially lower bioaccessible fractions of these metals due to their binding in less soluble spinel-group oxides. The results indicate that slag dusts are assumed to be risk materials, especially when children are considered as a target group. Still, this exposure scenario seems unrealistic due to (a) the fencing of the former mine area and its inaccessibility to the local community and (b) the low proportion of the fine particles in the granulated slag dump and improbability of their transport by wind. The human health risk related to the incidental ingestion of the soil dust, the most accessible to the local population, seems to be quite limited in the Selebi-Phikwe area, even when a higher dust ingestion rate (280 mg/d) is considered.
ABSTRACT
Weathering of Tl-containing sulfides in a model (12-week) peat pot trial was studied to better understand their geochemical stability, dissolution kinetics, alteration products and the associated release and mobility of anthropogenic Tl in organic environments. We also present the effect of industrial acid rainwater on sulfide degradation and Tl migration in naturally acidic peat. Sphalerite (ZnS) was much less stable in peat than other Tl-containing sulfides (galena and pyrite), and thus acted as a major phase responsible for Tl mobilization. Furthermore, Tl incongruently leached out over Zn from ZnS, and accumulated considerably more in the peat solutions (≤5 µg Tl/L) and the peat samples (≤0.4 mg Tl/kg) that were subjected to acid rain watering compared to a deionized H2O regime. This finding was in good agreement with the absence of secondary Tl-containing phases, which could potentially control the Tl flux into the peat. The behavior of Tl was not as conservative as Pb throughout the trial, since a higher peat mobility and migration potential of Tl was observed compared to Pb. In conclusion, industrial acid precipitations can significantly affect the stability of ZnS even in acidic peat/organic environments, making it susceptible to enhanced weathering and Tl release in the long term.
Subject(s)
Soil Pollutants , Thallium , Environmental Monitoring , Lead , Soil , Soil Pollutants/analysis , Sulfides , Thallium/analysisABSTRACT
In this study, we report combined Tl isotopic and Tl mineralogical and speciation data from a set of Tl-rich sulfide concentrates and technological wastes from hydrometallurgical Zn extraction. We also present the first evaluation of Tl isotopic ratios over a cycle of sulfide processing, from the ore flotation to pyro- and hydrometallurgical stages. The results demonstrate that the prevailing Tl form in all samples is Tl(I), without any preferential incorporation into sulfides or Tl-containing secondary phases, indicating an absence of Tl redox reactions. Although the Tl concentrations varied significantly in the studied samples (~9-280 mg/kg), the overall Tl isotopic variability was small, in the range of -3.1 to -4.4 ± 0.7 (2σ) ε205Tl units. By combining present ε205Tl results with the trends first found for a local roasting plant, it is possible to infer minimum Tl isotopic effects throughout the studied industrial process. As a result, the use of Tl isotopic ratios as a source proxy may be complicated or even impossible in areas with naturally high/extreme Tl background contents. On the other hand, areas with two or more isotopically contrasting Tl sources allow for relatively easy tracing, i.e., in compartments which do not suffer from post-depositional isotopic redistributions.
Subject(s)
Soil Pollutants , Thallium , Environmental Monitoring , Isotopes/analysis , Soil Pollutants/analysis , Sulfides , Thallium/analysisABSTRACT
Vertical profiles of Tl, Pb and Zn concentrations and Tl and Pb isotopic ratios in a contaminated peatland/fen (Wolbrom, Poland) were studied to address questions regarding (i) potential long-term immobility of Tl in a peat profile, and (ii) a possible link in Tl isotopic signatures between a Tl source and a peat sample. Both prerequisites are required for using peatlands as archives of atmospheric Tl deposition and Tl isotopic ratios as a source proxy. We demonstrate that Tl is an immobile element in peat with a conservative pattern synonymous to that of Pb, and in contrast to Zn. However, the peat Tl record was more affected by geogenic source(s), as inferred from the calculated element enrichments. The finding further implies that Tl was largely absent from the pre-industrial emissions (>~250 years BP). The measured variations in Tl isotopic ratios in respective peat samples suggest a consistency with anthropogenic Tl (ε205Tl between ~ -3 and -4), as well as with background Tl isotopic values in the study area (ε205Tl between ~0 and -1), in line with detected 206Pb/207Pb ratios (1.16-1.19). Therefore, we propose that peatlands can be used for monitoring trends in Tl deposition and that Tl isotopic ratios can serve to distinguish its origin(s). However, given that the studied fen has a particularly complicated geochemistry (attributed to significant environmental changes in its history), it seems that ombrotrophic peatlands could be better suited for this type of Tl research.
Subject(s)
Lead , Thallium , Environmental Monitoring , Mining , Soil , Thallium/analysisABSTRACT
The surroundings of mines and smelters may be exposed to wildfires, especially in semi-arid areas. The temperature-dependent releases of metal(loid)s (As, Cd, Cu, Pb, Zn) from biomass-rich savanna soils collected near a Cu smelter in Namibia have been studied under simulated wildfire conditions. Laboratory single-step combustion experiments (250-850 °C) and experiments with a continuous temperature increase (25-750 °C) were coupled with mineralogical investigations of the soils, ashes, and aerosols. Metals (Cd, Cu, Pb, Zn) were released at >550-600 °C, mostly at the highest temperatures, where complex aerosol particles, predominantly composed of slag-like aggregates, formed. In contrast, As exhibited several emission peaks at ~275 °C, ~370-410 °C, and ~580 °C, reflecting its complex speciation in the solid phase and indicating its remobilization, even during wildfires with moderate soil heating. At <500 °C, As was successively released via the transformation of As-bearing hydrous ferric oxides, arsenolite (As2O3) grains attached to the organic matter fragments, metal arsenates, and/or As-bearing apatite, followed by the thermal decomposition of enargite (Cu3AsS4) at >500 °C. The results indicate that the active and abandoned mining and smelting sites, especially those highly enriched in As, should be protected against wildfires, which can be responsible for substantial As re-emissions.
Subject(s)
Metals, Heavy , Soil Pollutants , Wildfires , Environmental Monitoring , Grassland , Metals, Heavy/analysis , Namibia , Soil , Soil Pollutants/analysisABSTRACT
Topsoils near active and abandoned mining and smelting sites are highly polluted by metal(loid) contaminants, which are often bound to particulates emitted from ore processing facilities and/or windblown from waste disposal sites. To quantitatively determine the contaminant partitioning in the soil particulates, we tested an automated mineralogy approach on the heavy mineral fraction extracted from the mining- and smelting-polluted topsoils exhibiting up to 1920 mg/kg As, 5840 mg/kg Cu, 4880 mg/kg Pb and 3310 mg/kg Zn. A new generation of automated scanning electron microscopy (autoSEM) was combined and optimized with conventional mineralogical techniques (XRD, SEM/EDS, EPMA). Parallel digestions and bulk chemical analyses were used as an independent control of the autoSEM-calculated concentrations of the key elements. This method provides faster data acquisition, the full integration of the quantitative EDS data and better detection limits for the elements of interest. We found that As was mainly bound to the apatite group minerals, slag glass and metal arsenates. Copper was predominantly hosted by the sulfides/sulfosalts and the Cu-bearing secondary carbonates. The deportment of Pb is relatively complex: slag glass, Fe and Mn (oxyhydr)oxides, metal arsenates/vanadates and cerussite were the most important carriers for Pb. Zinc is mainly bound to the slag glass, Fe (oxyhydr)oxides, smithsonite and sphalerite. Limitations exist for the less abundant contaminants, which cannot be fully quantified by autoSEM due to spectral overlaps with some major elements (e.g., Sb vs. Ca, Cd vs. K and Ca in the studied soils). AutoSEM was found to be a useful tool for the determination of the modal phase distribution and element partitioning in the metal(loid)-bearing soil particulates and will definitely find more applications in environmental soil sciences in the future.
Subject(s)
Metals, Heavy/analysis , Soil Pollutants/analysis , Environmental Monitoring , Minerals/analysis , Mining , SoilABSTRACT
The former Pb-Zn mining town of Kabwe in central Zambia is ranked amongst the worst polluted areas both in Africa and in the world. The fine dust particles from the ISF and Waelz slags deposited in Kabwe represent a health risk for the local population. Here, we combined a detailed multi-method mineralogical investigation with oral bioaccessibility testing in simulated gastric fluid (SGF; 0.4 M glycine, pH 1.5, L/S ratio of 100, 1 h, 37 °C) to evaluate the risk related to the incidental dust ingestion. The slag dust fractions contain up to 2610 mg/kg V, 6.3 wt% Pb and 19 wt% Zn. The metals are mainly bound in a slag glass and secondary phases, which formed during the slag weathering or were windblown from nearby tailing stockpiles (carbonates, Fe and Mn oxides, phosphates, vanadates). The bioaccessible fractions (BAFs) are rather high for all the main contaminants, with the BAF values generally higher for the ISF slags than for the Waelz slags: Pb (24-96%), V (21-100%) and Zn (54-81%). The results clearly indicate the potential risks related to the incidental slag dust ingestion. Even when a conservative value of the dust daily intake (100 mg/day) is considered, the daily contaminant intake significantly exceeds the tolerable daily intake limits, especially for Pb â« V > Zn. At higher ingestion rates, other minor contaminants (As, Cd) also become a health risk, especially for children. The slag heaps in Kabwe should be fenced to prevent local people entering and should be covered to limit the dust dispersion.
Subject(s)
Environmental Exposure , Industrial Waste , Child , Cities , Dust/analysis , Environmental Monitoring , Environmental Pollutants , Humans , Metals/analysis , Mining , ZambiaABSTRACT
We studied the key geochemical and mineralogical factors that could affect the fractionation of stable thallium (Tl) isotopes in soil. A set of grassland soil samples enriched in geogenic Tl in combination with selected Tl-containing mineral materials from the Czech Republic (Kluky) were investigated for this purpose. The results demonstrate significant incorporation of Tl in pedogenic (specific) Mn-oxide, which led to a large accumulation of the heavy 205Tl isotope (â¼+14 ε205Tl units), presumably resulting from oxidative Tl sorption. Consequently, we concluded that the Mn-oxide-controlled Tl uptake is the primary cause of the observed 205Tl enrichment in the middle profile zone, at the A/B soil horizon interface, with up to +4 of ε205Tl. Furthermore, our results displayed a clear relationship between the Tl isotopic fractionation degree and the Mn-oxide soil concentration (R2 = 0.6), as derived from the oxalate-extractable data. A combination of soil and mineralogical considerations suggests that 205Tl enrichment in respective soil samples is also partly due to the Tl present in micaceous clay minerals, mainly illite, which is the predominant pedogenic Tl host phase. In line with our previous results, this Tl behavior can be inferred from systematic Mn-oxide degradation and the associated Tl (enriched in 205Tl) cycling in the studied soils and thus, presumably in the redoximorphic soils in general.
Subject(s)
Soil Pollutants/analysis , Soil , Czech Republic , Isotopes , Thallium/analysisABSTRACT
Wildfires can be responsible for significant mercury (Hg) emissions especially in contaminated areas. Here, we investigated the Hg distribution in topsoils and vegetation samples and temperature-dependent Hg mobilization from biomass-rich topsoils collected near a copper (Cu) smelter in Tsumeb (semi-arid Namibia), where Hg-rich Cu concentrates are processed. The thermo-desorption (TD) experiments conducted on representative biomass-rich topsoils (3.9-7.7 mg Hg/kg) indicated that more than 91% of the Hg was released at â¼340 °C, which corresponds to the predominant grassland-fire conditions. The mineralogical investigation indicated that the Hg comes mainly from the deposited smelter emissions because no distinct Hg-rich microparticles corresponding to the windblown dust from the nearby disposal sites of the technological materials (concentrates, slags, tailings) were found. A comparison with the TD curves of the Hg reference compounds confirmed that the Hg in the biomass-rich topsoils occurs as a mixture of Hg bound to the organic matter and metacinnabar (black HgS), which exhibits similarities with the TD pattern of smelter flue dust residue. Despite the installation of a sulfuric acid plant in the smelter in 2015 and a calculated drop in the estimated Hg emissions (from 1301 ± 457 kg/y for the period 2004-2015 to 67 ± 5 kg/y after 2015), the Hg legacy pool in the smelter surroundings can potentially be re-emitted back to the atmosphere by wildfire. Using the Hg spatial distribution data in the area (184 km2), the estimates indicate that up to 303 kg and 1.3 kg can be remobilized from the topsoils and vegetation, respectively.
Subject(s)
Environmental Pollution , Mercury/analysis , Soil Pollutants/analysis , Wildfires , Biomass , Copper , Dust/analysis , Environmental Monitoring , Hot Temperature/adverse effectsABSTRACT
We studied thallium (Tl) isotope fractionation in white mustard grown hydroponically at different Tl doses. Thallium isotope signatures in plants indicated preferential incorporation of the light 203Tl isotope during Tl uptake from the nutrient solution. Negative isotope fractionation was even more pronounced in dependence on how much the available Tl pool decreased. This finding corresponds to the concept of isotope overprinting related to a high contamination level in the growing media (solution or soil). Regarding Tl translocation in plants, we observed a large Tl isotope shift with an enrichment in the heavy 205Tl isotope in the shoots relative to the roots in treatments with low/moderate solution Tl concentrations (0.01/0.05 mg Tl/L), with the corresponding α205/203Tl fractionation factors of Ë1.007 and 1.003, respectively. This finding is probably a consequence of specific (plant) reactions of Tl replacing K in its cycle. The formation of the S-coordinated Tl(I) complexes, potentially affecting both Tl accumulation and Tl isotope fractionation in plants, however, was not proven in our plants, since we did not have indication for that on the basis of X-ray absorption spectroscopy, suggesting that Tl was mainly present as free/hydrated Tl+ ion or chemically bound to O-containing functional groups.
Subject(s)
Mustard Plant/metabolism , Thallium/chemistry , Algorithms , Biomass , Brassica/metabolism , Metals/metabolism , Plant Leaves/metabolism , Plant Roots/metabolism , Plant Shoots/metabolism , Plant Stems/metabolism , Radioactive Pollutants , Thallium/metabolism , Thallium Radioisotopes/chemistry , Thallium Radioisotopes/metabolismABSTRACT
Ore mining and processing in semi-arid areas is responsible for the generation of metal(loid)-containing dust, which is easily transported by wind to the surrounding environment. To assess the human exposure to dust-derived metal(loid)s (As, Cd, Cu, Pb, Sb, Zn), as well as the potential risks related to incidental dust ingestion, we studied mine tailing dust (nâ¯=â¯8), slag dust (nâ¯=â¯5) and smelter dust (nâ¯=â¯4) from old mining and smelting sites in northern Namibia (Kombat, Berg Aukas, Tsumeb). In vitro bioaccessibility testing using extraction in simulated gastric fluid (SGF) was combined with determination of grain-size distributions, chemical and mineralogical characterizations and leaching tests conducted on original dust samples and separated PM10 fractions. The bulk and bioaccessible concentrations of the metal(loid)s were ranked as follows: mine tailing dustsâ¯<â¯slag dustsâ¯âªâ¯smelter dusts. Extremely high As and Pb bioaccessibilities in the smelter dusts were caused by the presence of highly soluble phases such as arsenolite (As2O3) and various metal-arsenates unstable under the acidic conditions of SGF. The exposure estimates calculated for an adult person of 70â¯kg at a dust ingestion rate of 50â¯mg/day indicated that As, Pb (and also Cd to a lesser extent) grossly exceeded tolerable daily intake limits for these contaminants in the case of slag and smelter dusts. The high risk for smelter dusts has been acknowledged, and the safety measures currently adopted by the smelter operator in Tsumeb are necessary to reduce the staff's exposure to contaminated dust. The exposure risk for the local population is only important at the unfenced disposal sites at Berg Aukas, where the PM10 exhibited high levels of bioaccessible Pb.
Subject(s)
Dust , Environmental Exposure , Metals , Mining , Soil Pollutants , Adult , Arsenates , Child , Dust/analysis , Environmental Monitoring , Humans , Metals/administration & dosage , Metals/analysis , Namibia , Soil Pollutants/administration & dosage , Soil Pollutants/analysisABSTRACT
The impact of a natural wetland ("dambo" in Zambia) on neutral mine drainage at Luanshya in the Zambian Copperbelt has been investigated during an intermediate discharge period (July) using a multi-method characterization of solid phase samples, sequential extraction analysis, X-ray diffraction, Mössbauer spectroscopy, and scanning electron microscopy combined with water analyses, isotopic analyses, and geochemical modeling. In the wetland, the principal identified solid phases in sediments were carbonates, gypsum, and ferric oxyhydroxides. A significant portion of the ochres was present as insoluble hematite. Mine drainage pH values decrease, and log [Formula: see text] values increase after inflow of water into the wetland; dissolved and suspended concentrations of Fe, Mn, Cu, and Co also decrease. Based on speciation calculations, there is no precipitation of secondary Cu and Co minerals in the period of sampling, but it can occur later in dry period when the flow rate is reduced. Concentrations of sulfate decrease, and values of δ34S(SO4) in the wetland increase in parallel, suggesting sulfate reduction is occurring. In more advanced dry period, the discharge in mine drainage stream is probably much lower and water can reach supersaturation with respect to minerals such as gypsum, which has been found in sediments. Wetlands have a positive impact on mine drainage water quality due to the removal of metals by adsorption, co-precipitation, and filtration of colloids. However, there can also be a rebound of contamination by seepage inflow downstream from the wetland. Ongoing climate change with extreme hydrologic events may enhance differences between dry and rainy seasons with resulting faster mobilization of contaminants.
Subject(s)
Climate Change , Environmental Monitoring , Metals, Heavy/analysis , Minerals/chemistry , Mining , Wastewater/chemistry , Wetlands , Adsorption , Calcium Sulfate/chemistry , Carbonates/chemistry , Chemical Precipitation , Colloids , Environmental Monitoring/methods , Ferric Compounds , Filtration , Seasons , Sulfates/analysis , Water Pollutants, Chemical/analysis , Weather , X-Ray Diffraction , ZambiaABSTRACT
Archived soil samples can provide important information on the history of environmental contamination and by comparison with recently collected samples, temporal trends can be inferred. Little previous work has addressed whether mercury (Hg) concentrations in soil samples are stable with long-term storage under standard laboratory conditions. In this study, we have re-analyzed using cold vapor atomic absorption spectroscopy a set of archived soil samples that ranged from relatively pristine mountainous sites to a polluted site near a non-ferrous metal smelter with a wide range of Hg concentrations (6.7-6485⯵gâ¯kg-1). Samples included organic and mineral soils and peats with a carbon content that ranged from 0.2 to 47.7%. Soil samples were stored in polyethylene bags or bottles and held in laboratory rooms where temperature was not kept to a constant value. Mercury concentrations in four subsets of samples were originally measured in 2000, 2005, 2006 and 2007, and re-analyzed in 2017, i.e. after 17, 12, 11 and 10 years of storage. Statistical analyses of either separated or lumped data yielded no significant differences between the original and current Hg concentrations. Based on these analyses, we show that archived soil and peat samples can be used to evaluate historical soil mercury contamination.
Subject(s)
Environmental Pollution/analysis , Mercury/analysis , Soil/chemistry , Specimen Handling/standards , Environmental Monitoring/methods , Soil Pollutants/analysis , Specimen Handling/methods , Spectrophotometry, Atomic , Time FactorsABSTRACT
We studied arid desert soils from Namibia (Rosh Pinah) that were contaminated with up to 7â¯mgâ¯kg-1 of thallium (Tl) via dust emitted from a local flotation tailing dam. Chemical extractions of waste and soil materials indicated that most of the Tl is strongly bound, in accordance with X-ray diffraction and X-ray absorption spectroscopy data that point to the predominant association of Tl with metal sulfides and phyllosilicates. The isotope fractionation factor ε205Tl of the soil samples (from -0.4 to +3.8) shows a positive linear relationship (R2â¯=â¯0.62) with 1/Tl, indicative for the mixing of two major Tl pools, presumably anthropogenic Tl and geogenic Tl. The ε205Tl value for the topmost soil samples (â¼+3) closely matches the ε205Tl value for post-flotation waste particles with a diameter of <0.05â¯mm, whereas the bulk flotation waste exhibits a significantly larger ε205Tl value (â¼+6). These variations are in accordance with predominant atmospheric transfer of Tl from the tailings to the adjacent soils via fine (dust) particles. The identified minimal Tl alteration in soils indicates that only a small part of the Tl could be potentially released and passively enter the vegetation, local population and/or food chain in the long term. From this viewpoint, Tl does not represent such an important environmental concern as other (abundant) contaminants at the locality. Furthermore, there could be a relevance for other alkaline desert soils, including those where Tl pollution plays a major role.