ABSTRACT
Corneal stromal disorders due to the loss of keratocytes can affect visual impairment and blindness. Corneal cell therapy is a promising therapeutic strategy for healing corneal tissue or even enhancing corneal function upon advanced disorders, however, the sources of corneal keratocytes are limited for clinical applications. Here, the capacity of cell-imprinted substrates fabricated by molding human keratocyte templates to induce differentiation of human adipose-derived stem cells (hADSCs) into keratocytes, is presented. Keratocytes are isolated from human corneal stroma and grown to transmit their ECM architecture and cell-like topographies to a PDMS substrate. The hADSCs are then seeded on cell-imprinted substrates and their differentiation to keratocytes in DMEM/F12 (with and without chemical factors) are evaluated by real-time PCR and immunocytochemistry. The mesenchymal stem cells grown on patterned substrates present gene and protein expression profiles similar to corneal keratocytes. In contrast, a negligible expression of myofibroblast marker in the hADSCs cultivated on the imprinted substrates, is observed. Microscopic analysis reveals dendritic morphology and ellipsoid nuclei similar to primary keratocytes. Overall, it is demonstrated that biomimetic imprinted substrates would be a sufficient driver to solely direct the stem cell fate toward target cells which is a significant achievement toward corneal regeneration.
Subject(s)
Corneal Diseases , Corneal Keratocytes , Humans , Cornea , Stem Cells , Dendritic Cells , RegenerationABSTRACT
Cornea as the outermost layer of the eye is at risk of various genetic and environmental diseases that can damage the cornea and impair vision. Corneal transplantation is among the most applicable surgical procedures for repairing the defected tissue. However, the scarcity of healthy tissue donations as well as transplantation failure has remained as the biggest challenges in confront of corneal grafting. Therefore, alternative approaches based on stem-cell transplantation and classic regenerative medicine have been developed for corneal regeneration. In this review, the application and limitation of the recently-used advanced approaches for regeneration of cornea are discussed. Additionally, other emerging powerful techniques such as 5D printing as a new branch of scaffold-based technologies for construction of tissues other than the cornea are highlighted and suggested as alternatives for corneal reconstruction. The introduced novel techniques may have great potential for clinical applications in corneal repair including disease modeling, 3D pattern scheming, and personalized medicine.
Subject(s)
Bioprinting , Tissue Engineering , Cornea , Printing, Three-Dimensional , Regeneration , Regenerative Medicine , Tissue Engineering/methods , Tissue ScaffoldsABSTRACT
A combination of [Formula: see text] nanotube array (TON) and controlled drug release system is employed to provide enhanced surface properties of titanium implants. Electrochemical anodization process is used to generate TON for introducing, vancomycin, an effective antibacterial drug against Staphylococcus aureus. TON loaded vancomycin is then coated with a number of layers of 10% gelatin using spin coating technique. The gelatin film is reinforced with graphene oxide (GO) nanoparticles to improve the surface bioactivity. The surface of the samples is characterized by field emission electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), and contact angle measurement. The results illustrate that the TON was constructed and vancomycin molecules are successfully loaded. The drug release study shows that the amount of released vancomycin is controlled by the thickness of gelatin layers. With an increase in gelatin film layers from 3 to 7, the release of vancomycin in the burst release phase decreased from 58 to 31%, and sustained release extended from 10 to 17 days. The addition of GO nanoparticles seems to reduce drug release in from 31 to 22% (burst release phase) and prolonged drug release (from 17 to 19 days). MTT assay indicates that samples show no cytotoxicity, and combination of GO nanoparticles with gelatin coating could highly promote MG63 cell proliferation. Soaking the samples in SBF solution after 3 and 7 days demonstrates that hydroxy apatite crystals were deposited on the TON surface with GO-gelatin coating more than surface of TON with gelatin. Moreover, based on the results of disc diffusion assay, both samples (loaded with Vancomycin and coated with gelatin and gelatin-GO) with the inhibition zones equaled to 20 mm show effective antibacterial properties against S. aureus. The evidence demonstrates that titania nanotube loaded with vancomycin and coated with gelatin-GO has a great potential for general applicability to the orthopedic implant field.
Subject(s)
Titanium , Vancomycin , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/pharmacology , Coated Materials, Biocompatible/chemistry , Coated Materials, Biocompatible/pharmacology , Gelatin/chemistry , Staphylococcus aureus , Surface Properties , Titanium/chemistry , Titanium/pharmacology , Vancomycin/pharmacologyABSTRACT
A multifunctionalized graphene oxide (GO)-based carrier with conjugation of aminated-polyethylene glycol (PEG-diamine), octaarginine (R8), and folic acid (FA), which also contains chloroquine (CQ), a lysosomotropic agent, is introduced. The cellular uptake mechanisms and intracellular targeting of FA-functionalized nanocarriers are examined. The localized releases of CQ and siRNA intracellular delivery are evaluated. Microencapsulation of the nanocarrier complexed with genes in layer-by-layer coating of alginate microbeads is also investigated. The covalently coconjugated FA with PEG and R8 provides a stable formulation with increased cellular uptake compared to FA-free carrier. The CQ-equipped nanocarrier shows a 95% release of CQ at lysosomal pH. The localized release of the drug inside the lysosomes is verified which accelerates the cargo discharge into cytoplasm.
Subject(s)
Chloroquine , Graphite , Chloroquine/pharmacology , Drug Carriers , Folic Acid , Polyethylene Glycols , RNA, Small Interfering/geneticsABSTRACT
BACKGROUND: Osteoporosis is a bone disease alters the amount and variety of proteins in bone tissue and increases the potential of bone fracture. Antiresorptive therapy is one of the most popular treatment methods for osteoporosis. To reduce side effects and enhance the bioavailability of drug agents, the controlled delivery of drug is commonly utilized. OBJECTIVES: We investigated the controlled release of Alendronate in different composites of layered double hydroxide (LDH) using poly (ε-caprolactone) (PCL) as a matrix. MATERIALS AND METHODS: We prepared different microsphere composites of ALD intercalated in various amounts of LDH, using PCL as a matrix. The controlled release of ALD from these composites is subsequently investigated. Samples are characterized and in vitro cell cytotoxicity, attachment, osteogenic activity including alkaline phosphatase activity and mineralization are examined using MG-63 human osteosarcoma cells. RESULTS: The results showed that the release of ALD is more desirable and controlled in the samples having a higher amount of LDH incorporated into the PCL matrix. MG63 cells show a significant increase in viability, attachment, and mineralization while alkaline phosphatase activity remains almost at a constant level after 3 weeks. CONCLUSIONS: Overall, the findings showed that by incorporation of 15 wt% of LDH, the composite microsphere is capable of holding the antiresorptive drug longer and release it in a more controlled manner. This is an advantageous and promising characteristic for a carrier that could be used as a potential candidate for osteoporosis treatment.
ABSTRACT
BACKGROUND: Ineffective integration has been recognized as one of the major causes of early orthopedic failure of titanium-based implants. One strategy to address this problem is to develop modified titanium surfaces that promote osteoblast differentiation. This study explored titanium surfaces modified with TiO2 nanotubes (TiO2 NTs) capable of localized drug delivery into bone and enhanced osteoblast cell differentiation. MATERIALS AND METHODS: Briefly, TiO2 NTs were subjected to anodic oxidation and loaded with Metformin, a widely used diabetes drug. To create surfaces with sustainable drug-eluting characteristics, TiO2 NTs were spin coated with a thin layer of chitosan. The surfaces were characterized via scanning electron microscopy, atomic force microscopy, and contact angle measurements. The surfaces were then exposed to mesenchymal bone marrow stem cells (MSCs) to evaluate cell adhesion, growth, differentiation, and morphology on the modified surfaces. RESULTS: A noticeable increase in drug release time (3 days vs 20 days) and a decrease in burst release characteristics (85% to 7%) was observed in coated samples as compared to uncoated samples, respectively. Chitosan-coated TiO2 NTs exhibited a considerable enhancement in cell adhesion, proliferation, and genetic expression of type I collagen, and alkaline phosphatase activity as compared to uncoated TiO2 NTs. CONCLUSION: TiO2 NT surfaces with a chitosan coating are capable of delivering Metformin to a bone site over a sustained period of time with the potential to enhance MSCs cell attachment, proliferation, and differentiation.
Subject(s)
Cell Differentiation/drug effects , Chitosan/chemistry , Drug Liberation , Metformin/pharmacology , Nanotubes/chemistry , Osteoblasts/cytology , Titanium/chemistry , Alkaline Phosphatase/metabolism , Animals , Cell Adhesion/drug effects , Cell Proliferation/drug effects , Cell Shape/drug effects , Humans , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/drug effects , Nanotubes/ultrastructure , Osteoblasts/drug effects , Osteoblasts/ultrastructure , Osteogenesis/drug effects , Rats, Wistar , WettabilityABSTRACT
Differentiation of stem cells to Schwann is considered efficient way for nerve regeneration since the sources of human Schwann cells are limited for clinical application. It is demonstrated that mimicking micromechanical forces or micro/nanotopographical environments that stem cells are experienced in vivo could control their fate. Here, the potency of substrates with imprinted cell-like topographies for direct differentiation of adipose-derived mesenchymal stem cells (ADSCs) into Schwann cells (SCs) is reported. For the preparation of substrates with imprinted SC-Like topographies, SCs are isolated from the sciatic nerve, grown, fixed, and then SC morphologies are transferred to polydimethylsiloxane (PDMS) substrates by mold casting. Subsequently, mesenchymal stem cells (MSCs) are seeded on the SC-imprinted substrates and their differentiation to SCs is evaluated by immunocytochemistry, real-time PCR, and western blotting. Analysis of morphology and expression of SC-specific markers show that MSCs cultured on the imprinted substrates have the typical SC-like morphology and express SC-specific markers including S100b, p75NTR, and Sox10. It is believed that specific cell-like topographies and related micromechanical cues can be sufficient for direct differentiation of ADSCs into Schwann cells by cell-imprinting method as a physical technique.
Subject(s)
Adipose Tissue/cytology , Cell Differentiation , Engineering , Mesenchymal Stem Cells/cytology , Schwann Cells/cytology , Animals , Nerve Regeneration , RatsABSTRACT
This in vitro study aimed to evaluate the physicochemical and biological activity of the polycaprolactone/chitosan/collagen scaffolds incorporated with 0, 0.5, 3, and 6 wt% of graphene oxide (GO). Using standard tests and MG-63 cells, the characteristics of scaffolds were evaluated, and the behavior of osteoblasts were simulated, respectively. A non-significant decrease in nanofibers diameter was noted in scaffolds with a higher ratio of GO. The hydrophilicity and bioactivity of the scaffold surface, as well as cell attachment and proliferation, increased in correspondence to an increase in GO. The higher ratio of GO also improved the osteogenesis activity. GO increased the degradation rate, but it was negligible and seemed not enough to endanger stability. Modifying the scaffolds with GO did not make a significant change to the antibacterial effect.
Subject(s)
Chitosan/chemistry , Collagen/chemistry , Graphite/chemistry , Polyesters/chemistry , Tissue Scaffolds/chemistry , Biocompatible Materials/chemistry , Cell Line , Humans , Materials Testing , Nanofibers/chemistry , Osteoblasts/cytology , Osteogenesis , Tissue EngineeringABSTRACT
Early and effective integration of titanium-based materials into bone tissue is of vital importance for long-term stability of implants. Surface modification is commonly used to enhance cell-substrate interactions for improving cell adhesion, proliferation, and activity. Here, the surface of titanium substrates and commercial implants were coated with blood (TiB), fetal bovine serum (TiF), and phosphate-buffered saline (TiP) solution using a spin coating process. Surface roughness and wettability of samples were measured using contact angle measurements and atomic force microscopy. The samples were then exposed to human osteoblast-like MG63 cells in order to evaluate adhesion, growth, differentiation, and morphology on the surface of modified samples. Untreated titanium disks were used as controls. The lowest roughness and wettability values were found in unmodified titanium samples followed by TiP, TiF, and TiB. The percentage of cellular attachment and proliferation for each sample was measured using an MTT (3-[4,5-dimethylthiazol-2yl] 2,5diphenyl-2H-tetrazoliumbromide) assay. Cell adhesion and proliferation were most improved on TiB followed closely by TiF. The results of this study revealed an increased expression of the osteogenic marker protein alkaline phosphatase on TiB and the coated commercial titanium implants. These results suggested that precoating titanium samples with blood may improve cellular response by successfully mimicking a physiological environment that could be beneficial for clinical implant procedures.
Subject(s)
Dental Implants , Osteogenesis , Titanium , Cell Adhesion , Cell Proliferation , Humans , Osteoblasts , Surface PropertiesABSTRACT
Atherosclerosis and cancer are the leading causes of mortality around the world that share common pathogenic pathways. The aim of this study is the investigation of the protein profile of atherosclerotic plaque in order to find similar biomarker between cancer and atherosclerosis. The small pieces of human coronary artery containing advanced atherosclerotic plaque is obtained from patients during bypass surgery. Structural characterization of type V plaque, including fibrous connective tissue, necrotic lipid core, cholesterol clefts and calcium deposits are performed using high resolution transmission electron microscopy (HR-TEM). The protein profile of atherosclerosis plaque is also analyzed using 2-dimensional electrophoresis and matrix-assisted laser desorption-ionization time-of-flight (MALDI-TOF). TEM analysis shows that vascular smooth muscle cells (VSMCs) exhibit different and uncommon morphologies in atherosclerotic plaque which is correlated to the proliferative state of the cells. The proteomics analysis reveals proteins related to atherosclerosis formation including Mimecan, Ras Suppressor Protein-1 (RSUP-1) and Cathepsin D which identified as biomarker of cancerous tumors. The expression of Mimecan and RSUP-1 is down-regulated in atherosclerotic plaque while the expression of Cathepsin D is up-regulated. These data support that atherosclerotic plaque presents some degree of tumorgenesis with the significant activity of VSMCs as the key player in atherogenesis.
Subject(s)
Cathepsin D/analysis , Intercellular Signaling Peptides and Proteins/analysis , Neoplasms/pathology , Plaque, Atherosclerotic/pathology , Transcription Factors/analysis , Biomarkers, Tumor/analysis , Electrophoresis, Gel, Two-Dimensional , Humans , Neoplasms/chemistry , Plaque, Atherosclerotic/chemistry , Proteome/analysis , Proteomics , Spectrometry, Mass, Matrix-Assisted Laser Desorption-IonizationABSTRACT
A natural peptide motif in the first helix of osteocalcin (OCN) is used to promote nucleation and crystallization of hydroxyapatite (HA) in hard tissue. The capability of osteocalcin mimetic peptides to induce osteogenic activity of osteoblast cells leading to in-vitro mineralization is demonstrated. An osteocalcin-derived peptide consisting of thirteen amino acids is synthesized in both acidic (OSC) and amidic (OSN) forms and added into the human osteoblast-like cells (MG63) culture. The viability, proliferation, alkaline phosphatase activity, HA deposition and osteogenic gene expression by osteoblast cells are evaluated. It is revealed that the addition of 100 µg/ml of peptides enhances the proliferation rate and total protein content of osteoblast cells. Alkaline phosphatase activity is significantly higher in the presence of peptides which in turn stimulated RNA expression of collagen type I and osteopontin in a phosphate-dependent manner. Alizarin red staining and calcium content measurement show that mineral deposition is considerably increased. Ultrastructural characterization of MG63 cultures confirms the crystalline nature and chemical composition of HA mineral formation in the presence of peptides. It is confirmed that the osteocalcin-derived peptide, particularly in amidic form (OSN), is able to act as a bioactive inducer of mineralization process and hence accelerating bone tissue regeneration.
Subject(s)
Biomimetic Materials/pharmacology , Durapatite/chemistry , Osteoblasts/drug effects , Osteocalcin/chemistry , Osteogenesis/drug effects , Peptides/pharmacology , Alkaline Phosphatase/genetics , Alkaline Phosphatase/metabolism , Biomarkers/metabolism , Biomimetic Materials/chemical synthesis , Bone Regeneration/drug effects , Bone and Bones/cytology , Bone and Bones/drug effects , Bone and Bones/metabolism , Calcification, Physiologic/drug effects , Cell Line, Tumor , Cell Proliferation/drug effects , Collagen Type I/genetics , Collagen Type I/metabolism , Extracellular Matrix/chemistry , Extracellular Matrix/drug effects , Extracellular Matrix/metabolism , Gene Expression , Humans , Osteoblasts/cytology , Osteoblasts/metabolism , Osteogenesis/genetics , Osteopontin/genetics , Osteopontin/metabolism , Peptides/chemical synthesisABSTRACT
Development of multicellular organisms is a very complex and organized process during which cells respond to various factors and features in extracellular environments. It has been demonstrated that during embryonic evolvement, under certain physiological or experimental conditions, unspecialized cells or stem cells can be induced to become tissue or organ-specific cells with special functions. Considering the importance of physical cues in stem cell fate, the present study reviews the role of physical factors in stem cells differentiation and discusses the molecular mechanisms associated with these factors.
Subject(s)
Actin Cytoskeleton/metabolism , Embryonic Stem Cells/metabolism , Focal Adhesions/metabolism , Integrins/metabolism , Mechanotransduction, Cellular , rho GTP-Binding Proteins/metabolism , Actin Cytoskeleton/ultrastructure , Animals , Biomechanical Phenomena , Cell Differentiation , Cell Shape/physiology , Elasticity , Embryo, Mammalian , Embryonic Stem Cells/cytology , Focal Adhesions/ultrastructure , Gene Expression Regulation , Hardness , Humans , Integrins/genetics , Osmotic Pressure , Surface Tension , rho GTP-Binding Proteins/geneticsABSTRACT
The natural conditions of chondrocytes in native cartilage including mechanical forces and surface topology could be simulated to enhance chondrogenesis. A perfusion system recapitulating the hydrodynamic pressure of cartilage tissue is designed. Mesenchymal stem cells (MSCs) are isolated and seeded on aligned nanofibrous PCL/PLGA scaffolds that mimic the structure of superficial zone of articular cartilage. The cell-seeded scaffolds are placed into the perfusion bioreactor and exposed to chondrogenic differentiating medium. The chondrogenesis is then investigated by histological analysis and real time PCR for cartilage-specific genes. The highest expression levels of aggrecan and type II collagen are observed in the cells cultured in the presence of differentiating medium and mechanical stimulation. The expression level of type II collagen is higher than aggrecan in presence of differentiating medium and absence of mechanical stimulation. On the contrary, the expression ratio of aggrecan is higher than type II collagen in presence of mechanical stimulation and absence of differentiating medium. These results show the dominant role of mechanical stimulation and differentiating medium on upregulated expression of aggrecan and type II collagen, respectively. The application of mechanical stimulation upon cells-seeded scaffolds could mimic superficial zone of articular cartilage tissue and increase derivation of chondrocytes from MSCs.
Subject(s)
Bioreactors , Cartilage, Articular/growth & development , Cell Differentiation , Chondrocytes/cytology , Chondrogenesis , Mesenchymal Stem Cells/cytology , Adolescent , Adult , Aggrecans/biosynthesis , Bone Marrow Cells/cytology , Bone Marrow Cells/metabolism , Cartilage, Articular/cytology , Cell Culture Techniques/methods , Collagen Type II/biosynthesis , Female , Humans , Hydrodynamics , Mesenchymal Stem Cells/metabolism , Perfusion/instrumentation , Pressure , Stress, Mechanical , Tissue Engineering/methods , Tissue Scaffolds , Young AdultABSTRACT
Many approaches have been developed to regenerate biological substitutes for repairing damaged tissues. Guided bone/tissue regeneration (GBR/GTR) that employs a barrier membrane has received much attention in recent years. Regardless of substantial efforts for treatment of damaged tissue in recent years, an effective therapeutic strategy is still a challenge for tissue engineering researchers. The aim of the current study is to fabricate a GBR membrane consisting of polycaprolactone (PCL)/gelatin/chitosan which is modified with different percentages of ß-tricalcium phosphate (ß-TCP) for improved biocompatibility, mechanical properties, and antibacterial activity. The membranes are examined for their mechanical properties, surface roughness, hydrophilicity, biodegradability and biological response. The mechanical properties, wettability and roughness of the membranes are improved with increases in ß-TCP content. An increase in the elastic modulus of the substrates is obtained as the amount of ß-TCP increases to 5% (145-200 MPa). After 5 h, the number of attached cells is enhanced by 30%, 40% and 50% on membranes having 1%, 3% and 5% ß-TCP, respectively. The cell growth on a membrane with 3% of ß-TCP is also 50% and 20% higher than those without ß-TCP and 5% ß-TCP, respectively. Expression of type I collagen is increased with addition of ß-TCP by 3%, while there is no difference in ALP activity. The results indicated that a composite having (3%) ß-TCP has a potential application for guided bone tissue regeneration.
ABSTRACT
The successful application of nucleic acid-based therapy for the treatment of various cancers is largely dependent on a safe and efficient delivery system. A dual-functionalized graphene oxide (GO)-based nanocarrier with the conjugation of aminated-polyethylene glycol (PEG-diamine) and octa-arginine (R8) for the intracellular delivery of nucleic acids is proposed. The functionalized sites are covalently co-conjugated and the PEG : R8 molar ratio is optimized at 10 : 1 to achieve a hydrocolloidally stable size of 252 ± 2.0 nm with an effective charge of +40.97 ± 1.05 and an amine-rich content of 10.87 ± 0.4 µmol g-1. The uptake of the nanocarrier in breast cancer cell lines, MCF-7 and MDA-MB 231, is investigated. The siRNA and pDNA condensation ability in the presence and absence of enzymes and the endosomal buffering capacity, as well as the intracellular localization of the gene/nanocarrier complex are also evaluated. Furthermore, the delivery of functional genes associated with the nanocarrier is assessed using c-Myc protein knockdown and EGFP gene expression. The effective uptake of the nanocarrier by the cells shows superior cytocompatibility, and protects the siRNA and pDNA against enzyme degradation while inhibiting their migration with N : P ratios of 10 and 5, respectively. The co-conjugation of PEG-diamine and the cationic cell-penetrating peptide (CPP) into the GO nanocarrier also provides a superior internalization efficacy of 85% in comparison with a commercially available transfection reagent. The c-Myc protein knockdown and EGFP expression, which are induced by the nanocarrier, confirm that the optimized PEG-diamine/R8-functionalized GO could effectively deliver pDNA and siRNA into the cells and interfere with gene expression.
Subject(s)
Arginine/analogs & derivatives , Graphite/chemistry , Nanostructures/chemistry , Nucleic Acids/administration & dosage , Polyethylene Glycols/chemistry , Transfection/methods , Amination , Cell Line, Tumor , Green Fluorescent Proteins/genetics , Humans , MCF-7 Cells , Nucleic Acids/genetics , Oxides/chemistry , Plasmids/administration & dosage , Plasmids/genetics , Proto-Oncogene Proteins c-myc/genetics , RNA, Small Interfering/administration & dosage , RNA, Small Interfering/geneticsABSTRACT
Zein nanoparticles as a carrier system for BMP6-derived peptide were prepared by liquid-liquid phase separation procedure and characterized with SEM, DLS, FTIR and thermogravimetric methods. After peptide encapsulation, nanoparticle size increased from 236.3 ± 92.2 nm to 379.4 ± 116.8 nm. The encapsulation efficiency of peptide was 72.6% and the release of peptide from Zein nanoparticles was partly sustained in trypsin containing phosphate buffered saline (pH 7.4) for up to 14 days. Peptide-loaded nanoparticles showed similar cell viability compared with blank ones. ALP activity of C2C12 cells treated with peptide-loaded nanoparticles (500 µg/mL) was evaluated 7, 14, 21 and 28 days after culture. In peptide-loaded nanoparticles, ALP activity was significantly higher (p < .05) compared with other groups at day 14. Alizarin Red S staining showed, C2C12 cells behind peptide-loaded nanoparticles had significantly (p < .05) higher calcium deposition at day 21. The results of RT-qPCR show that the BMP-6 peptide activated expression of RUNX2 as a transcription factor. In turn, RUNX2 regulates SPP1 and BGLAP gene expression, as osteogenic marker genes. The results confirm that the peptide-loaded Zein nanoparticles, as osteoinductive material, may be used to repair small area of bone defects, with low load bearing.
Subject(s)
Bone Morphogenetic Protein 6/chemistry , Cell Differentiation/drug effects , Drug Carriers/chemistry , Nanoparticles/chemistry , Osteogenesis/drug effects , Peptide Fragments/pharmacology , Zein/chemistry , Amino Acid Sequence , Cell Line , Drug Liberation , Peptide Fragments/chemistryABSTRACT
PURPOSE: Titanium-based biomaterials present good biocompatibility, while their osseointegration and antibacterial properties need to be improved. This study aimed to enhance the bone-bonding ability of titanium-based granules, which are intended to be used as bone graft. MATERIALS AND METHODS: The titanium granules were anodized in ethylene glycol-based electrolyte and subsequently annealed to be loaded separately with simvastatin. The samples were then inspected with attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) for drug loading. The release of simvastatin from titanium granule samples was measured after soaking samples in phosphate-buffered saline (PBS) for 30 days using ultraviolet-visible (UV/Vis) spectroscopy. The alkaline phosphatase (ALP) activity of MG63 osteosarcoma-loaded samples was measured, and microbroth dilution assay was performed to evaluate the antibacterial potential of drug-loaded and nonloaded titanium granule samples for bacterial growth. RESULTS: The results expressed the gradual and constant release of simvastatin within the duration of the examination. ALP of the samples showed improved activity of anodized and annealed granules, while the antibacterial test illustrated no significant improvement in their bactericidal effects. However, the simvastatin-loaded samples showed an improved antibacterial effect compared with nonloaded samples. CONCLUSION: It is assumed that anodizing, annealing, and subsequent simvastatin loading of titanium granules could be used as surface modification to improve osseointegration and restrain bacterial growth and adhesion. It is fair to believe that the results of this study could be used to treat titanium granules as bone graft substitute materials for dental and orthopedic applications.
Subject(s)
Anti-Bacterial Agents/administration & dosage , Coated Materials, Biocompatible , Drug Delivery Systems/methods , Escherichia coli/drug effects , Osteogenesis/drug effects , Simvastatin/administration & dosage , Titanium/chemistry , Biocompatible Materials/chemical synthesis , Colony Count, Microbial , Escherichia coli/growth & development , Humans , Microscopy, Electron, Scanning , Osseointegration/drug effects , Osteosarcoma/diagnostic imaging , Osteosarcoma/pathology , Spectroscopy, Fourier Transform Infrared , Surface PropertiesABSTRACT
Background: Disulfiram is oral aldehyde dehydrogenase (ALDH) inhibitor that has been used in the treatment of alcoholism. Recent studies show that this drug has anticancer properties; however, its rapid degradation has limited its clinical application. Encapsulation of disulfiram polymeric nanoparticles (NPs) may improve its anticancer activities and protect rapid degradation of the drug. Materials andMethods: A poly (lactide-co-Glycolide) (PLGA) was developed for encapsulation of disulfiram and its delivery into breast cancer cells. Disulfiram encapsulated PLGA NPs were prepared by nanoprecipitation method and were characterized by Scanning Electron Microscopy (SEM). The loading and encapsulation efficiency of NPs were determined using UV-Visible spectroscopy. Cell cytotoxicity of free and encapsulated form of disulfiram is also determined using MTT assay. Results: Disulfiram encapsulated PLGA NPs had uniform size with 165 nm. Drug loading and entrapment efficiency were 5.35 ±0.03% and 58.85±1.01%. The results of MTT assay showed that disulfiram encapsulated PLGA NPs were more potent in induction of apoptosis compare to free disulfiram. Conclusion: Based on the results obtained in the present study it can be concluded that encapsulation of disulfiram with PLGA can protect its degradation in improve its cytotoxicity on breast cancer cells.
ABSTRACT
Parkinson's disease (PD) is a progressive neurodegenerative disorder that characterized by destruction of substantia nigrostriatal pathway due to the loss of dopaminergic (DA) neurons. Regardless of substantial efforts for treatment of PD in recent years, an effective therapeutic strategy is still missing. In a multidisciplinary approach, bone marrow derived mesenchymal stem cells (BMSCs) are genetically engineered to overexpress neurotrophin-3 (nt-3 gene) that protect central nervous system tissues and stimulates neuronal-like differentiation of BMSCs. Poly(lactic-co-glycolic acid) (PLGA) microcarriers are designed as an injectable scaffold and synthesized via double emulsion method. The surface of PLGA microcarriers are functionalized by collagen as a bioadhesive agent for improved cell attachment. The results demonstrate effective overexpression of NT-3. The expression of tyrosine hydroxylase (TH) in transfected BMSCs reveal that NT-3 promotes the intracellular signaling pathway of DA neuron differentiation. It is also shown that transfected BMSCs are successfully attached to the surface of microcarriers. The presence of dopamine in peripheral media of cell/microcarrier complex reveals that BMSCs are successfully differentiated into dopaminergic neuron. Our approach that sustains presence of growth factor can be suggested as a novel complementary therapeutic strategy for treatment of Parkinson disease.
Subject(s)
Mesenchymal Stem Cells , Brain , Cell Differentiation , Humans , Lactic Acid , Parkinson Disease , Polyglycolic Acid , Polylactic Acid-Polyglycolic Acid Copolymer , Tissue EngineeringABSTRACT
PURPOSE: The highly porous titanium granules are currently being used as bone substitute material and for bone tissue augmentation. However, they suffer from weak bone bonding ability. The aim of this study was to create a nanostructured surface oxide layer on irregularly shaped titanium granules to improve their bioactivity. This could be achieved using optimized electrochemical anodic oxidation (anodizing) and heat treatment processes. MATERIALS AND METHODS: The anodizing process was done in an ethylene glycol-based electrolyte at an optimized condition of 60 V for 3 hours. The anodized granules were subsequently annealed at 450°C for 1 hour. Scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopy (EDS), and x-ray diffraction (XRD) were used to characterize the surface structure and morphology of the granules. The in vitro bioactivity of the samples was evaluated by immersion of specimens in simulated body fluid (SBF) for 1, 2, and 3 weeks. The human osteoblastic sarcoma cell line, MG63, was used to evaluate cell viability on the samples using dimethylthiazol-diphenyl tetrazolium bromide (MTT) assay. RESULTS: The results demonstrated the formation of amorphous nanostructured titanium oxide after anodizing, which transformed to crystalline anatase and rutile phases upon heat treatment. After immersion in SBF, spherical aggregates of amorphous calcium phosphate were formed on the surface of the anodized sample, which turned into crystalline hydroxyapatite on the surface of the anodized annealed sample. No cytotoxicity was detected among the samples. CONCLUSION: It is suggested that anodic oxidation followed by heat treatment could be used as an effective surface treatment procedure to improve bioactivity of titanium granules implemented for bone tissue repair and augmentation.