ABSTRACT
Diepoxin-η (1) is a cytotoxic fungal metabolite belonging to the spirobisnaphthalene structural class. In this study, four mono fluorinated analogues (2-5) of diepoxin-η (1) were semisynthesized in a single-step by selectively fluorinating the naphthalene moiety with Selectfluor. The structures of 2-5 were elucidated using a set of spectroscopic and spectrometric techniques and were further confirmed by means of TDDFT-ECD and isotropic shielding tensors calculations. Compounds 2-5 showed equipotent cytotoxic activity to 1 when tested against OVCAR3 (ovarian) and MDA-MB-435 (melanoma) cancer cell lines with IC50 values that range from 5.7-8.2 µM.
ABSTRACT
In-building disinfectants are commonly applied to control the growth of pathogens in plumbing, particularly in facilities such as hospitals that house vulnerable populations. However, their application has not been well optimized, especially with respect to interactive effects with pipe materials and potential unintended effects, such as enrichment of antibiotic resistance genes (ARGs) across the microbial community. Here, we used triplicate convectively mixed pipe reactors consisting of three pipe materials (PVC, copper, and iron) for replicated simulation of the distal reaches of premise plumbing and evaluated the effects of incrementally increased doses of chlorine, chloramine, chlorine dioxide, and copper-silver disinfectants. We used shotgun metagenomic sequencing to characterize the resulting succession of the corresponding microbiomes over the course of 37 weeks. We found that both disinfectants and pipe material affected ARG and microbial community taxonomic composition both independently and interactively. Water quality and total bacterial numbers were not found to be predictive of pathogenic species markers. One result of particular concern was the tendency of disinfectants, especially monochloramine, to enrich ARGs. Metagenome assembly indicated that many ARGs were enriched specifically among the pathogenic species. Functional gene analysis was indicative of a response of the microbes to oxidative stress, which is known to co/cross-select for antibiotic resistance. These findings emphasize the need for a holistic evaluation of pathogen control strategies for plumbing.
Subject(s)
Disinfectants , Drinking Water , Sanitary Engineering , Disinfectants/pharmacology , Water Supply , Anti-Bacterial Agents/pharmacology , Copper , Cell ProliferationABSTRACT
A framework is needed to account for interactive effects of plumbing materials and disinfectants on opportunistic pathogens (OPs) in building water systems. Here we evaluated free chlorine, monochloramine, chlorine dioxide, and copper-silver ionization (CSI) for controlling Pseudomonas aeruginosa and Acinetobacter baumannii as two representative OPs that colonize hot water plumbing, in tests using polyvinylchloride (PVC), copper-PVC, and iron-PVC convectively-mixed pipe reactors (CMPRs). Pipe materials vulnerable to corrosion (i.e., iron and copper) altered the pH, dissolved oxygen, and disinfectant levels in a manner that influenced growth trends of the two OPs and total bacteria. P. aeruginosa grew well in PVC CMPRs, poorly in iron-PVC CMPRs, and was best controlled by CSI disinfection, whereas A. baumannii showed the opposite trend for pipe material and was better controlled by chlorine and chlorine dioxide. Various scenarios were identified in which pipe material and disinfectant can interact to either hinder or accelerate growth of OPs, illustrating the difficulties of controlling OPs in portions of plumbing systems experiencing warm, stagnant water.
ABSTRACT
Rationale: The prevalence of nontuberculous mycobacterial (NTM) pulmonary disease varies geographically in the United States. Previous studies indicate that the presence of certain water-quality constituents in source water increases NTM infection risk. Objective: To identify water-quality constituents that influence the risk of NTM pulmonary infection in persons with cystic fibrosis in the United States. Methods: We conducted a population-based case-control study using NTM incidence data collected from the Cystic Fibrosis Foundation Patient Registry during 2010-2019. We linked patient zip code to the county and associated patient county of residence with surface water data extracted from the Water Quality Portal. We used logistic regression models to estimate the odds of NTM infection as a function of water-quality constituents. We modeled two outcomes: pulmonary infection due to Mycobacterium avium complex (MAC) and Mycobacterium abscessus species. Results: We identified 484 MAC cases, 222 M. abscessus cases and 2816 NTM-negative cystic fibrosis controls resident in 11 states. In multivariable models, we found that for every 1-standardized unit increase in the log concentration of sulfate and vanadium in surface water at the county level, the odds of infection increased by 39% and 21%, respectively, among persons with cystic fibrosis with MAC compared with cystic fibrosis-NTM-negative controls. When modeling M. abscessus as the dependent variable, every 1-standardized unit increase in the log concentration of molybdenum increased the odds of infection by 36%. Conclusions: These findings suggest that naturally occurring and anthropogenic water-quality constituents may influence the NTM abundance in water sources that supply municipal water systems, thereby increasing MAC and M. abscessus infection risk.
ABSTRACT
Antimicrobial coatings have a finite lifetime because of wear, depletion of the active ingredient, or surface contamination that produces a barrier between the pathogen and the active ingredient. The limited lifetime means that facile replacement is important. Here, we describe a generic method for rapidly applying and reapplying antimicrobial coatings to common-touch surfaces. The method is to deposit an antimicrobial coating on a generic adhesive film (wrap), and then to attach that modified wrap to the common-touch surface. In this scenario, the adhesion of the wrap and antimicrobial efficacy are separated and can be optimized independently. We demonstrate the fabrication of two antimicrobial wraps, both using cuprous oxide (Cu2O) as the active ingredient. The first uses polyurethane (PU) as the polymeric binder and the second uses polydopamine (PDA). Our antimicrobial PU/Cu2O and PDA/Cu2O wraps, respectively, kill >99.98% and >99.82% of the human pathogen, P. aeruginosa, in only 10 min, and each of them kill >99.99% of the bacterium in 20 min. These antimicrobial wraps can be removed and replaced on the same object in <1 min with no tools. Wraps are already frequently used by consumers to coat drawers or cars for aesthetic or protective purposes.
ABSTRACT
Antimicrobial coatings can be used to reduce the transmission of infectious agents that are spread by contact. An effective coating should kill microbes in the time between users, which is sometimes minutes or less. Fast killing requires fast transport, and our proposed method of fast transport is a porous coating where the contaminated liquid imbibes (infiltrates) into the pores to achieve rapid contact with active material inside the pores. We test the hypothesis that a porous antimicrobial coating will enable faster inactivation of microorganisms than a planar coating of the same material. We use hydrophilic pores with dimensions of 5-100 µm such that liquid droplets imbibe in seconds, and from there transport distances and times are short, defined by the pore size rather than the droplet size. Our coating has two levels of structure: (A) a porous scaffold and (B) an antimicrobial coating within the pore structure containing the active ingredient. Two scaffolds are studied: stainless steel and poly(methyl methacrylate) (PMMA). The active ingredient is electrolessly deposited copper. To enhance adhesion and growth of copper, a layer of polydopamine (PDA) is deposited on the scaffold prior to deposition of the copper. This porous copper coating kills 99.84% of Pseudomonas aeruginosa within 3 min, which is equivalent to a half-life of 27 s. In contrast, the same layer of PDA/copper on a nonporous coating kills 79.65% in the same time frame, consistent with the hypothesis that the killing rate is increased by the addition of porosity. Using the porous PMMA scaffold, the porous antimicrobial coating kills >99.99% P. aeruginosa in 5 min, which is equivalent to a half-life of 21 s. The higher rate of kill on the porous antimicrobial solid is appropriate for hindering the spread of infectious agents on common-use objects.
Subject(s)
Anti-Infective Agents , Polymethyl Methacrylate , Porosity , Copper/chemistry , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Anti-Infective Agents/pharmacologyABSTRACT
The National Institute of Allergy and Infectious Diseases organized a symposium in June 2022, to facilitate discussion of the environmental risks for nontuberculous mycobacteria exposure and disease. The expert researchers presented recent studies and identified numerous research gaps. This report summarizes the discussion and identifies six major areas of future research related to culture-based and culture independent laboratory methods, alternate culture media and culturing conditions, frameworks for standardized laboratory methods, improved environmental sampling strategies, validation of exposure measures, and availability of high-quality spatiotemporal data.
Subject(s)
Mycobacterium Infections, Nontuberculous , Mycobacterium tuberculosis , Humans , Mycobacterium Infections, Nontuberculous/microbiology , Nontuberculous Mycobacteria , Culture Media , Specimen HandlingABSTRACT
Antimicrobial coatings can inhibit the transmission of infectious diseases when they provide a quick kill that is achieved long after the coating application. Here, we describe the fabrication and testing of a glass coating containing Ag2O microparticles that was prepared from sodium silicate at room temperature. The half-lives of both methicillin-resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa on this coating are only 2-4 min. The half-life of Clostridioides difficile spores is about 9-12 min, which is extremely short for a spore. Additional tests on MRSA demonstrate that the coating retains its antimicrobial activity after abrasion and that an increased loading of Ag2O leads to a shorter half-life. This coating combines the properties of optical transparency, robustness, fast kill, and room temperature preparation that are highly desirable for an antimicrobial coating.
ABSTRACT
The nontuberculous mycobacteria (NTM) are normal inhabitants of soils and waters and thereby surround humans due to their presence in water that is distributed to homes, apartments, offices, hospitals and long-term care facilities in pipes. The NTM are not contaminants of drinking water, rather they are colonists ideally adapted to growth and persistence in natural waters. Further those adaptations also favor NTM survival, persistence, and growth in drinking water systems. Thereby, NTM surround humans. The NTM love plumbing as it offers a high surface to volume ratio, ideal for surface adherence and biofilm formation. As a consequence, these slow growing bacteria are not flushed out by flowing water. Factors that support NTM growth and persistence in drinking water include: disinfectant-resistance, growth at low organic matter content (oligotrophic), surface attachment and biofilm formation, growth at low oxygen content (stagnant water), and desiccation-tolerance. A major determinant of the ecology of NTM is the lipid-rich outer membrane. The outer membrane provides a hydrophobic barrier that is relatively impermeable. Although the outer membrane reduces influx of nutrients, it also impedes transport of hydrophilic disinfectants (e.g., chlorine) and antibiotics. NTM are quite adaptable: able to grow in fresh or brackish natural waters and able to induce a high-temperature-resistant state.
Subject(s)
Drinking Water , Mycobacterium Infections, Nontuberculous , Mycobacterium tuberculosis , Humans , Nontuberculous Mycobacteria , Drinking Water/microbiology , Mycobacterium Infections, Nontuberculous/microbiologyABSTRACT
Nontuberculous mycobacteria (NTM) represent an important group of environmentally saprophytic and potentially pathogenic bacteria that can cause serious mycobacterioses in humans and animals. The sources of infections often remain undetected except for soil- or water-borne, water-washed, water-based, or water-related infections caused by groups of the Mycobacterium (M.) avium complex; M. fortuitum; and other NTM species, including M. marinum infection, known as fish tank granuloma, and M. ulcerans infection, which is described as a Buruli ulcer. NTM could be considered as water-borne, air-borne, and soil-borne pathogens (sapronoses). A lot of clinically relevant NTM species could be considered due to the enormity of published data on permanent, periodic, transient, and incidental sapronoses. Interest is currently increasing in mycobacterioses diagnosed in humans and husbandry animals (esp. pigs) caused by NTM species present in peat bogs, potting soil, garden peat, bat and bird guano, and other matrices used as garden fertilizers. NTM are present in dust particles and in water aerosols, which represent certain factors during aerogenous infection in immunosuppressed host organisms during hospitalization, speleotherapy, and leisure activities. For this Special Issue, a collection of articles providing a current view of the research on NTM-including the clinical relevance, therapy, prevention of mycobacterioses, epidemiology, and ecology-are addressed.
ABSTRACT
Desiccation-tolerance of cells of four strains of Mycobacterium chimaera and individual strains of Mycobacterium avium, Mycobacterium intracellulare, Mycobacterium abscessus, and Mycobacterium chelonae were measured by two methods. The survival of water-acclimated cells both in filter paper and on the surface of stainless-steel coupons were measured. In filter paper at 40% relative humidity at 25 °C, survival of patient isolates of M. avium and M. chimaera cells was 28% and 34% after 21 days of incubation, whereas it was 100% for the Sorin 3T isolate of M. chimaera. On stainless-steel biofilms after 42 days of incubation at 40% relative humidity at 25 °C, survival of water-acclimated cells of M. intracellulare was above 100%, while M. chelonae cells did not survive beyond 21 days, and survival of water-acclimated cells of M. avium and M. abscessus was 18% and 14%, respectively. On stainless-steel coupons, survival of patient and Sorin 3T isolates of M. chimaera was quite similar, specifically between 14% and 28% survival, after 42 days of incubation at 40% relative humidity at 25 °C. The experiments would support the hypothesis that some nontuberculous mycobacterial species are relatively desiccation-tolerant, whereas others are not. Further, long-term survival of the two M. chimaera strains is consistent with the presence of that species in Sorin 3T heater-coolers shipped throughout the world.
ABSTRACT
Studies on an organic extract of a marine fungus, Periconia sp. (strain G1144), led to the isolation of three halogenated cyclopentenes along with the known and recently reported rhytidhyester D; a series of spectrometric and spectroscopic techniques were used to elucidate these structures. Interestingly, two of these compounds represent tri-halogenated cyclopentene derivatives, which have been observed only rarely from Nature. The relative and absolute configurations of the compounds were established via mass spectrometry (MS), nuclear magnetic resonance (NMR) spectroscopy, Mosher's esters method, optical rotation and GIAO NMR calculations, including correlation coefficient calculations and the use of both DP4+ and dJ DP4 analyses. Several of the isolated compounds were tested for activity in anti-parasitic, antimicrobial, quorum sensing inhibition, and cytotoxicity assays and were shown to be inactive.
Subject(s)
Anti-Infective Agents , Ascomycota , Anti-Bacterial Agents/pharmacology , Ascomycota/chemistry , Cyclopentanes/pharmacology , Magnetic Resonance Spectroscopy , Molecular StructureABSTRACT
Transparent antimicrobial coatings can maintain the aesthetic appeal of surfaces and the functionality of a touch-screen while adding the benefit of reducing disease transmission. We fabricated an antimicrobial coating of silver oxide particles in a silicate matrix on glass. The matrix was grown by a modified Stöber sol-gel process with vapor-phase water and ammonia. A coating on glass with 2.4 mg of Ag2O per mm2 caused a reduction of 99.3% of SARS-CoV-2 and >99.5% of Pseudomonas aeruginosa, Staphylococcus aureus, and methicillin-resistant Staphylococcus aureus compared to the uncoated glass after 1 h. We envisage that screen protectors with transparent antimicrobial coatings will find particular application to communal touch-screens, such as in supermarkets and other check-out or check-in facilities where a number of individuals utilize the same touch-screen in a short interval.
Subject(s)
Anti-Infective Agents/chemistry , Bacterial Infections/prevention & control , COVID-19/prevention & control , Oxides/chemistry , Silver Compounds/chemistry , Ammonia/chemistry , Anti-Infective Agents/pharmacology , Bacterial Infections/microbiology , COVID-19/virology , Glass/chemistry , Humans , Methicillin-Resistant Staphylococcus aureus/drug effects , Methicillin-Resistant Staphylococcus aureus/pathogenicity , Oxides/pharmacology , Pseudomonas aeruginosa/drug effects , Pseudomonas aeruginosa/pathogenicity , SARS-CoV-2/drug effects , SARS-CoV-2/pathogenicity , Silicates/chemistry , Silver Compounds/pharmacology , Water/chemistryABSTRACT
In recent years, drinking water-associated pathogens that can cause infections in immunocompromised or otherwise susceptible individuals (henceforth referred to as DWPI), sometimes referred to as opportunistic pathogens or opportunistic premise plumbing pathogens, have received considerable attention. DWPI research has largely been conducted by experts focusing on specific microorganisms or within silos of expertise. The resulting mitigation approaches optimized for a single microorganism may have unintended consequences and trade-offs for other DWPI or other interests (e.g., energy costs and conservation). For example, the ecological and epidemiological issues characteristic of Legionella pneumophila diverge from those relevant for Mycobacterium avium and other nontuberculous mycobacteria. Recent advances in understanding DWPI as part of a complex microbial ecosystem inhabiting drinking water systems continues to reveal additional challenges: namely, how can all microorganisms of concern be managed simultaneously? In order to protect public health, we must take a more holistic approach in all aspects of the field, including basic research, monitoring methods, risk-based mitigation techniques, and policy. A holistic approach will (i) target multiple microorganisms simultaneously, (ii) involve experts across several disciplines, and (iii) communicate results across disciplines and more broadly, proactively addressing source water-to-customer system management.
Subject(s)
Drinking Water , Legionella pneumophila , Communication , Ecosystem , Humans , Sanitary Engineering , Water Microbiology , Water SupplyABSTRACT
Rationale: Nontuberculous mycobacteria (NTM) are ubiquitous environmental bacteria, and some pathogenic species cause lung disease. Environmental factors contribute to increased NTM abundance, with higher potential for exposure and infection. Objectives: To identify water-quality constituents that influence the risk of NTM infection in Oregon. Methods: We conducted a population-based cohort study using patient incidence data from the Oregon statewide NTM laboratory data collected as part of a public health surveillance project from 2007 through 2012. To estimate the risk of NTM pulmonary infection (PI) from exposure to water constituents, we extracted water-quality data from the Water Quality Portal and associated these data with corresponding patient county of residence. Using generalized linear models, we modeled two outcomes: Mycobacterium avium complex species PI and Mycobacterium abscessus group species PI. Results: For every 1-unit increase in the log concentration of vanadium in surface water, infection risk increased by 49% among persons with Mycobacterium avium complex PI. Among those with Mycobacterium abscessus PI, we observed that for every 1-unit increase in the log concentration of molybdenum in surface water, infection risk increased by 41%. The highest risk of infection due to Mycobacterium abscessus group infection was concentrated in counties within the Northwestern region of Oregon. High infection risk associated with Mycobacterium avium complex species did not show any geographic pattern. Conclusions: Concentrations of the trace metals molybdenum and vanadium in surface water sources were associated with NTM infection in Oregon. These findings may help identify regions at higher risk of NTM infection to guide risk reduction strategies.
Subject(s)
Mycobacterium Infections, Nontuberculous , Cohort Studies , Humans , Mycobacterium Infections, Nontuberculous/epidemiology , Mycobacterium Infections, Nontuberculous/microbiology , Mycobacterium avium Complex , Nontuberculous Mycobacteria , Oregon/epidemiologyABSTRACT
Nontuberculous mycobacteria (NTM) are opportunistic human pathogens that are widespread in the human environment. In fact, NTM surround humans. The basis for their widespread presence in soils and natural and human-engineered waters lies primarily in their disinfectant resistance, biofilm formation, and adaptability to fluctuating environmental conditions. As NTM in drinking water surround humans, a major route of infection is through aerosols. The characteristics of NTM, including resistance to disinfection, adherence to surfaces and biofilm formation, present challenges to contemporary water treatment processes developed for control of Escherichia coli and fecal coliforms.
ABSTRACT
Antimicrobial coatings are one method to reduce the spread of microbial diseases. Transparent coatings preserve the visual properties of surfaces and are strictly necessary for applications such as antimicrobial cell phone screens. This work describes transparent coatings that inactivate microbes within minutes. The coatings are based on a polydopamine (PDA) adhesive, which has the useful property that the monomer can be sprayed, and then the monomer polymerizes in a conformal film at room temperature. Two coatings are described (1) a coating where PDA is deposited first and then a thin layer of copper is grown on the PDA by electroless deposition (PDA/Cu) and (2) a coating where a suspension of Cu2O particles in a PDA solution is deposited in a single step (PDA/Cu2O). In the second coating, PDA menisci bind Cu2O particles to the solid surface. Both coatings are transparent and are highly efficient in inactivating microbes. PDA/Cu kills >99.99% of Pseudomonas aeruginosa and 99.18% of methicillin-resistant Staphylococcus aureus (MRSA) in only 10 min and inactivates 99.98% of SARS-CoV-2 virus in 1 h. PDA/Cu2O kills 99.94% of P. aeruginosa and 96.82% of MRSA within 10 min and inactivates 99.88% of SARS-CoV-2 in 1 h.
Subject(s)
Anti-Bacterial Agents/pharmacology , Antiviral Agents/pharmacology , Drug Resistance, Microbial/drug effects , SARS-CoV-2/drug effects , COVID-19/virology , Humans , Methicillin-Resistant Staphylococcus aureus/drug effects , Pseudomonas aeruginosa/drug effects , Surface PropertiesABSTRACT
Diverse pathogens can potentially persist and proliferate in reclaimed water distribution systems (RWDSs). The goal of this study was to evaluate interactive effects of reclaimed water treatments and water age on persistence and proliferation of multiple fecal (e.g., Klebsiella, Enterobacter) and non-fecal (e.g., Legionella, mycobacteria) gene markers in RWDSs. Six laboratory-scale RWDSs were operated in parallel receiving the influent with or without biologically active carbon (BAC) filtration + chlorination, chloramination, or no disinfectant residual. After 3 years of operation, the RWDSs were subject to sacrificial sampling and shotgun metagenomic sequencing. We developed an in-house metagenome-derived pathogen quantification pipeline, validated by quantitative polymerase chain reaction and mock community analysis, to estimate changes in abundance of â¼30 genera containing waterborne pathogens. Microbial community composition in the RWDS bulk water, biofilm, and sediments was clearly shaped by BAC filtration, disinfectant conditions, and water age. Key commonalities were noted in the ecological niches occupied by fecal pathogen markers in the RWDSs, while non-fecal pathogen markers were more varied in their distribution. BAC-filtration + chlorine was found to most effectively control the widest range of target genera. However, filtration alone or chlorine secondary disinfection alone resulted in proliferation of some of these genera containing waterborne pathogens.
Subject(s)
Disinfection , Water Purification , Cell Proliferation , Chlorine , Water , Water MicrobiologyABSTRACT
Spontaneous mutants of Mycobacterium smegmatis strain mc2155 resistant to 1-PG (iridium-L-phenylglycine complex), an antimycobacterial antibiotic, were isolated. Based on the discovery that some 1-PG-resistant mutants (1-PG R ) were also resistant to high concentrations of clarithromycin (≥250 µg/ml), but no other anti-mycobacterial antibiotics, the 23S rRNA region spanning the peptidyl transferase domain was sequenced and mutations shown to be localized in the peptidyl transferase domain of the 23S rRNA gene. Measurements showed that 1-PG bound to ribosomes isolated from the 1-PG-sensitive parental strain, but the ribosome binding values for the 1-PG R mutant reduced.