Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 4 de 4
Filter
Add more filters











Database
Language
Publication year range
1.
J Environ Radioact ; 257: 107075, 2023 Feb.
Article in English | MEDLINE | ID: mdl-36462454

ABSTRACT

Ultra-low-level measurements of radionuclides in air have been conducted at the Savannah River National Laboratory (SRNL) to determine the atmospheric concentration of fission products released following the Fukushima Daiichi reactor accident on March 11, 2011. Air filter samples were acquired from two high-volume collection systems (a traditional filter-based system and an electrostatic precipitator-based system) to monitor airborne radionuclide concentrations in the period covering from 2 weeks to 3 years after the disaster. The world-wide spread of low-level concentrations of airborne fission products from the Fukushima event provided a unique opportunity to demonstrate SRNL's electrostatic particle collection technology and other improvements in environmental monitoring developed at the Savannah River Site (SRS). Detecting and analyzing the release allowed a comprehensive test of SRS systems for monitoring environmental radioactivity. Gamma-ray-emitting fission products (131,132I, 134,136,137Cs, and 129,132Te) and cosmogenic isotopes (7Be and 22Na) in air were detected and quantified by high-resolution gamma-ray spectroscopy at concentrations as low as 0.07 µBq per standard cubic meter (SCM) (50 mBq total 137Cs), while plutonium content was quantified by thermal ionization mass spectrometry (TIMS) at concentrations as low as 6.5 × 10-21 g/SCM (3.0 fg 239+240Pu). Isotope concentrations measured at SRNL from gamma-ray spectroscopy were compared to independent measurements from Chapel Hill, NC, located approximately 370 km (230 mi) NE of SRNL. Meteorological modeling was also used to predict radionuclide transport from the location of release to both measurement locations.


Subject(s)
Air Pollutants, Radioactive , Fukushima Nuclear Accident , Radiation Monitoring , Air Pollutants, Radioactive/analysis , Radiation Monitoring/methods , Cesium Radioisotopes/analysis , Mass Spectrometry , Rivers , Japan
2.
Appl Spectrosc ; 77(5): 449-456, 2023 May.
Article in English | MEDLINE | ID: mdl-36464665

ABSTRACT

Diffuse reflectance spectroscopy measurements in the shortwave infrared (930-1600 nm) spectral region were acquired for Pu2(C2O4)3•9H2O and its thermal decomposition product, PuO2. We analyzed a total of eight PuO2 samples that were produced at different calcination temperatures (300, 350, 450, 525, 600, 675, 750, and 900 °C). Our goal was to identify spectroscopic fingerprints that could be used to gain retrospective information regarding the production parameters of these important nuclear compounds. The diffuse reflectance spectrum of Pu2(C2O4)3•9H2O features several broad bands that currently preclude detailed analysis. However, all PuO2 samples produced relatively sharp spectral features that got sharper and more intense for samples that were produced at higher calcination temperatures. The electronic band observed at 1433 nm in the diffuse reflectance spectra of PuO2 was found to be a sensitive indicator of crystallinity; a result that is corroborated by ancillary Raman spectroscopy measurements. Principal component analysis of diffuse reflectance spectra was able to clearly rank and categorize PuO2 samples based on the calcination temperature that was employed during their production. Thus, we show herein that important retrospective information pertaining to the process history of PuO2 can be gained through the relatively simplistic combination of diffuse reflectance spectroscopy and principal component analysis. This discovery presents a new method for determining the provenance and process history of PuO2 and should have an impact in the fields of nuclear forensics and nuclear nonproliferation.

3.
Phys Med Biol ; 57(13): 4195-210, 2012 Jul 07.
Article in English | MEDLINE | ID: mdl-22684043

ABSTRACT

Several positron emitting radioisotopes such as (11)C and (13)N can be used in plant biology research. The (11)CO(2) tracer is used to facilitate plant biology research toward optimization of plant productivity, biofuel development and carbon sequestration in biomass. Positron emission tomography (PET) imaging has been used to study carbon transport in live plants using (11)CO(2). Because plants typically have very thin leaves, little medium is present for the emitted positrons to undergo an annihilation event. The emitted positrons from (11)C (maximum energy 960 keV) could require up to approximately 4 mm of water equivalent material for positron annihilation. Thus many of the positrons do not annihilate inside the leaf, resulting in limited sensitivity for PET imaging. To address this problem we have developed a compact beta-positive, beta-minus particle imager (PhytoBeta imager) for (11)CO(2) leaf imaging. The detector is based on a Hamamatsu H8500 position sensitive photomultiplier tube optically coupled via optical grease to a 0.5 mm thick Eljen EJ-212 plastic scintillator. The detector is equipped with a flexible arm to allow its placement and orientation over or under the leaf to be studied while maintaining the leaf's original orientation. To test the utility of the system the detector was used to measure carbon translocation in a leaf of the spicebush (Lindera benzoin) under two transient light conditions.


Subject(s)
Lindera/metabolism , Positron-Emission Tomography/instrumentation , Carbon Dioxide , Carbon Radioisotopes , Plant Leaves/metabolism
4.
Phys Med Biol ; 55(17): 4977-92, 2010 Sep 07.
Article in English | MEDLINE | ID: mdl-20693612

ABSTRACT

The objective of this paper is threefold: (1) to establish sensitivity of XRQA and EBT radiochromic films to fast neutron exposure; (2) to develop a film response to radiation dose calibration curve and (3) to investigate a two-dimensional (2D) film dosimetry technique for use in establishing an experimental setup for a radiobiological irradiation of mice and to assess the dose to the mice in this setup. The films were exposed to a 10 MeV neutron beam via the (2)H(d,n)(3)He reaction. The XRQA film response was a factor of 1.39 greater than EBT film response to the 10 MeV neutron beam when exposed to a neutron dose of 165 cGy. A film response-to-soft tissue dose calibration function was established over a range of 0-10 Gy and had a goodness of fit of 0.9926 with the calibration data. The 2D film dosimetry technique estimated the neutron dose to the mice by measuring the dose using a mouse phantom and by placing a piece of film on the exterior of the experimental mouse setup. The film results were benchmarked using Monte Carlo and aluminum (Al) foil activation measurements. The radiochromic film, Monte Carlo and Al foil dose measurements were strongly correlated, and the film within the mouse phantom agreed to better than 7% of the externally mounted films. These results demonstrated the potential application of radiochromic films for passive 2D neutron dosimetry.


Subject(s)
Fast Neutrons/therapeutic use , Feasibility Studies , Film Dosimetry/instrumentation , Algorithms , Aluminum/chemistry , Animals , Calibration , Film Dosimetry/methods , Helium/chemistry , Hydrogen/chemistry , Mice , Monte Carlo Method , Phantoms, Imaging , Radiotherapy Dosage , Reproducibility of Results
SELECTION OF CITATIONS
SEARCH DETAIL