Water quality and health in northern Canada: stored drinking water and acute gastrointestinal illness in Labrador Inuit.

One of the highest self-reported incidence rates of acute gastrointestinal illness (AGI) in the global peer-reviewed literature occurs in Inuit communities in the Canadian Arctic. This high incidence of illness could be due, in part, to the consumption of contaminated water, as many northern communities face challenges related to the quality of municipal drinking water. Furthermore, many Inuit store drinking water in containers in the home, which could increase the risk of contamination between source and point-of-use (i.e., water recontamination during storage). To examine this risk, this research characterized drinking water collection and storage practices, identified potential risk factors for water contamination between source and point-of-use, and examined possible associations between drinking water contamination and self-reported AGI in the Inuit community of Rigolet, Canada. The study included a cross-sectional census survey that captured data on types of drinking water used, household practices related to drinking water (e.g., how it was collected and stored), physical characteristics of water storage containers, and self-reported AGI. Additionally, water samples were collected from all identified drinking water containers in homes and analyzed for presence of Escherichia coli and total coliforms. Despite municipally treated tap water being available in all homes, 77.6% of households had alternative sources of drinking water stored in containers, and of these containers, 25.2% tested positive for total coliforms. The use of transfer devices and water dippers (i.e., smaller bowls or measuring cups) for the collection and retrieval of water from containers were both significantly associated with increased odds of total coliform presence in stored water (ORtransfer device = 3.4, 95% CI 1.2-11.7; ORdipper = 13.4, 95% CI 3.8-47.1). Twenty-eight-day period prevalence of self-reported AGI during the month before the survey was 17.2% (95% CI 13.0-22.5), which yielded an annual incidence rate of 2.4 cases per person per year (95% CI 1.8-3.1); no water-related risk factors were significantly associated with AGI. Considering the high prevalence of, and risk factors associated with, indicator bacteria in drinking water stored in containers, potential exposure to waterborne pathogens may be minimized through interventions at the household level.

How are perceptions associated with water consumption in Canadian Inuit? A cross-sectional survey in Rigolet, Labrador.

Concerns regarding the safety and aesthetic qualities of one's municipal drinking water supply are important factors influencing drinking water perceptions and consumption patterns (i.e. sources used and daily volume of consumption). In northern Canada, Inuit communities face challenges with drinking water quality, and many Inuit have reported concerns regarding the safety of their drinking water. The objectives of this research were to describe perceptions of municipal tap water, examine use of water sources and changes following the installation of a potable water dispensing unit (PWDU) in 2014, and identify factors associated with water consumption in the Inuit community of Rigolet. This study used data from three cross-sectional census surveys conducted between 2012 and 2014. Principal component analysis (PCA) was used to aggregate data from multiple variables related to perceptions of water, and logistic regressions were used to identify variables associated with water consumption patterns. Three quarters of residents reported using the PWDU after its installation, with concomitant declines reported in consumption of bottled, tap, and brook water. Negative perceptions of tap water were associated with lower odds of consuming tap water (ORPCAcomponent1=0.73, 95% CI 0.56-0.94; ORPCAcomponent2=0.67, 95% CI 0.49-0.93); women had higher odds of drinking purchased water compared to men (OR=1.90, 95% CI 1.11-3.26). The median amount of water consumed per day was 1L. Using brook water (OR=2.60, 95% CI 1.22-5.56) and living in a household where no one had full-time employment (OR=2.94, 95% CI 1.35-6.39) were associated with consuming >2L of water per day. Results of this study may inform drinking water interventions, risk assessments, and public health messaging in Rigolet and other Indigenous communities.

Community-based adaptation research in the Canadian Arctic.

Community-based adaptation (CBA) has emerged over the last decade as an approach to empowering communities to plan for and cope with the impacts of climate change. While such approaches have been widely advocated, few have critically examined the tensions and challenges that CBA brings. Responding to this gap, this article critically examines the use of CBA approaches with Inuit communities in Canada. We suggest that CBA holds significant promise to make adaptation research more democratic and responsive to local needs, providing a basis for developing locally appropriate adaptations based on local/indigenous and Western knowledge. Yet, we argue that CBA is not a panacea, and its common portrayal as such obscures its limitations, nuances, and challenges. Indeed, if uncritically adopted, CBA can potentially lead to maladaptation, may be inappropriate in some instances, can legitimize outside intervention and control, and may further marginalize communities. We identify responsibilities for researchers engaging in CBA work to manage these challenges, emphasizing the centrality of how knowledge is generated, the need for project flexibility and openness to change, and the importance of ensuring partnerships between researchers and communities are transparent. Researchers also need to be realistic about what CBA can achieve, and should not assume that research has a positive role to play in community adaptation just because it utilizes participatory approaches. WIREs Clim Change 2016, 7:175-191. doi: 10.1002/wcc.376 For further resources related to this article, please visit the WIREs website.

Oxygen Demand of Fresh and Stored Sulfide Solutions and Sulfide-Rich Constructed Wetland Effluent.

This study investigated the contribution of hydrogen sulfide to biological oxygen demand (BOD5) and chemical oxygen demand (COD) in wastewater effluents, and documented the effect of storage times and conditions on the BOD5 and COD of pH-adjusted sodium sulfide solutions as well as graywater wetland effluent. Initial COD measurements of sulfide solutions were 84-89% of the theoretical oxygen demand (ThOD), 1.996 mg O2/mg S, whereas unseeded BOD5 measurements were 55-77%. For sulfide solutions, all storage conditions led to declines of >15% (COD, BOD5), and >31% (sulfide). For wetland effluent, storage without headspace was effective in reducing COD losses (3.7%), compared to storage with headspace (17%), and affected changes in turbidity, UVA-254 and pH. The results suggest that storage times and conditions should be controlled and reported when reporting BOD5 and COD of sulfide-rich samples. Wetland models representing sulfate reduction as a method of COD removal may need to be reconsidered.

Systems approaches to integrated solid waste management in developing countries.

Solid waste management (SWM) has become an issue of increasing global concern as urban populations continue to rise and consumption patterns change. The health and environmental implications associated with SWM are mounting in urgency, particularly in the context of developing countries. While systems analyses largely targeting well-defined, engineered systems have been used to help SWM agencies in industrialized countries since the 1960s, collection and removal dominate the SWM sector in developing countries. This review contrasts the history and current paradigms of SWM practices and policies in industrialized countries with the current challenges and complexities faced in developing country SWM. In industrialized countries, public health, environment, resource scarcity, climate change, and public awareness and participation have acted as SWM drivers towards the current paradigm of integrated SWM. However, urbanization, inequality, and economic growth; cultural and socio-economic aspects; policy, governance, and institutional issues; and international influences have complicated SWM in developing countries. This has limited the applicability of approaches that were successful along the SWM development trajectories of industrialized countries. This review demonstrates the importance of founding new SWM approaches for developing country contexts in post-normal science and complex, adaptive systems thinking.

Overcoming the toxicity effects of municipal wastewater sludge and biosolid extracts in the Yeast Estrogen Screen (YES) assay.

For nearly two decades, the Yeast Estrogen Screen (YES) has been used as a valuable tool for determining the total estrogenic potency of various environmental samples, including influent and effluent streams at municipal wastewater plants. However, applying the YES assay to wastewater sludges and stabilized biosolids has been problematic. This is due to co-extracted compounds from the solids either proving toxic to the yeast or masking the presence of estrogenic substances. The present research describes the development and validation of sample preparation steps that mitigate the toxicity effects of municipal wastewater sludge and biosolid samples in the YES assay, while allowing for reliable dose-dependent expression of estrogenic activity. A copper work-up for sulfur removal and chromatographic cleanup with silica and alumina were required in addition to solid-phase extraction to adequately remove interfering compounds. Sample stabilization methods such as autoclaving, lyophilization and formaldehyde treatment were found to be detrimental to the assay. Hence, heat-drying is recommended to prevent cytotoxicity and the degradation of estrogenic substances.

Addressing reverse osmosis fouling within water reclamation--a side-by-side comparison of low-pressure membrane pretreatments.

A tertiary membrane filtration (TMF) pilot operating on secondary effluent and a membrane bioreactor (MBR) were setup in a side-by-side study as pretreatments for two identical reverse osmosis pilot systems. The water quality of the permeate from both low-pressure membrane pretreatment systems and the fouling rate of the reverse osmosis systems were compared to assess the capabilities of the two low-pressure membrane pretreatments to prevent organic fouling of the reverse osmosis systems. Both pretreatment pilots were setup using typical operating conditions (i.e., solids retention time and mixed-liquor suspended solids). A consistent difference in water quality and reverse osmosis performance was demonstrated during the 12-month study. The MBR permeate consistently had significantly lower total organic carbon (TOC) and chemical oxygen demand concentrations, but higher color and specific UV absorbance compared with the permeate from the TMF pretreatment. The pretreatment with the MBR gave an average reverse osmosis fouling rate over the entire study (0.27 Lmh/bar.month) that was less than half of the value found for the reverse osmosis with TMF pretreatment (0.60 Lmh/bar.month). A correlation of reverse osmosis feed TOC concentration with average reverse osmosis fouling rate also was established, independent of the pretreatment method used. Results from a cleaning analysis, energy dispersive spectroscopy, and fourier transformed infrared reflectometry confirmed that the foulants were primarily organic in nature. It is concluded that, for this type of application and setup, MBR systems present an advantage over tertiary membrane polishing of secondary effluent for reverse osmosis pretreatment.

Fate of endocrine-active compounds during municipal biosolids treatment: a review.

For two decades, the fates of endocrine-disrupting compounds (EDCs) across various wastewater treatment processes have been studied using chemical and in vitro bioassay measurements. In comparison, little work has been conducted to track the fates of EDCs during municipal biosolids stabilization, particularly using bioassay approaches. This leads to knowledge gaps with respect to understanding which single or combined biosolid treatments facilitate EDC removal, and what the total endocrine-active potency of treated biosolids might be. These unknowns in turn heighten public opposition and distrust of biosolids reuse applications. This review aims to summarize what is currently known regarding EDC removal during commonly used full-scale biosolids treatment processes and highlights analytical challenges that are relevant when in vitro bioassays and chemical analyses are applied to biosolids samples.

A critical evaluation of two point-of-use water treatment technologies: can they provide water that meets WHO drinking water guidelines?

Point-of-use (POU) technologies have been proposed as solutions for meeting the Millennium Development Goal (MDG) for safe water. They reduce the risk of contamination between the water source and the home, by providing treatment at the household level. This study examined two POU technologies commonly used around the world: BioSand and ceramic filters. While the health benefits in terms of diarrhoeal disease reduction have been fairly well documented for both technologies, little research has focused on the ability of these technologies to treat other contaminants that pose health concerns, including the potential for formation of contaminants as a result of POU treatment. These technologies have not been rigorously tested to see if they meet World Health Organization (WHO) drinking water guidelines. A study was developed to evaluate POU BioSand and ceramic filters in terms of microbiological and chemical quality of the treated water. The following parameters were monitored on filters in rural Cambodia over a six-month period: iron, manganese, fluoride, nitrate, nitrite and Escherichia coli. The results revealed that these technologies are not capable of consistently meeting all of the WHO drinking water guidelines for these parameters.

Nitrification, denitrification and ammonification in point-of-use biosand filters in rural Cambodia.

In order to address the United Nations Millennium Development Goal (MDG) target #7 for water and sanitation, the World Health Organization (WHO) has identified point-of-use (POU) water treatment technologies as an option for providing safe water to households. The BioSand filter (BSF) is a commonly used POU system that has been implemented in Cambodia and over 20 countries worldwide. While the health benefits of using a BSF in terms of reduction of diarrheal disease have been fairly well documented, little research has focused on the ability of this technology to treat for other contaminants that could pose health concerns. To address these concerns, a study was developed to evaluate this technology in rural Cambodia in terms of microbiological and chemical quality of the treated water. The study revealed that simultaneous nitrification and denitrification is occurring inside the BioSand filters. Nitrite concentrations in treated water consistently exceeded WHO guidelines. Seventeen of 20 filters on average did not meet the 3.0 mg l(-1) NO2- guideline and the combined nitrate-nitrite guideline ratio of 1. Denitrification seemed to predominate when BSFs were fed surface water. In addition, nitrate-ammonification occurred in some filters fed surface water, causing increases in ammonia in treated water.

Effects of total suspended solids loading on short-term fouling in the treatment of secondary effluent by an immersed ultrafiltration pilot system.

This study examined the performance of a pilot-scale immersed ultrafiltration system using secondary effluent as a feed source, with particular emphasis on the role played by total suspended solids (TSS) on short-term fouling rates within permeation cycles. Key secondary effluent quality characteristics, such as ionic composition and total/ colloidal organic carbon content, remained reasonably stable during the course of the study. However, TSS loads in the secondary effluent were correlated with the extent of within-cycle fouling. This relationship existed irrespective of membrane packing density or the operating flux, although the latter parameter did control the rate at which within-cycle fouling occurred. Although the complex causes of ultrafiltration membrane fouling during tertiary treatment over the long term remain poorly understood, TSS levels in the feed may offer a simple means of better predicting within-cycle spikes in transmembrane pressure. Based on historical and seasonal trends, or both, of TSS loads in the secondary clarifiers of a given wastewater treatment plant, periods requiring an increased frequency of backpulses or recovery cleanings may be identified before implementation of full-scale tertiary ultrafiltration systems.