Optimization of different growth parameters for maximum production of bioactive crude metabolites by Aspergillus fumigatus.

Aspergillus fumigatus is a green echinulate with greenish phialides and 2.5-3 mm conidia. The diverse biological functions of A. fumigatus secondary metabolites make them interesting. The ethyl acetate extract of A. fumigatus was tested for antibacterial activity. Culture media, temperature, incubation and pH were optimized for A. fumigatus growth. Continuous 150rpm agitation incubated the fungus at 28°C for 10 days. Potato Dextrose Broth at 28°C in shaking incubator at pH 04 produced the most biomass and secondary metabolites. Metabolite antibacterial activity was tested. Salmonella flexneri had the greatest zone of inhibition at 100µl (25.66mm) while Staphylococcus aureus had the least (16.33mm). At 75µg/mL, S. flexneri showed 23.66mm activity and S. typhi 14.66mm. At 50µg/mL, S. flexneri was 21.33mm and S. typhi 12.33mmMBC was 0.01µg/µl and MIC50 varied. At 100µg/mL, the metabolites showed antifungal efficacy against Penicillium chrysogenum (26.33mm) but not A. flavus (21.33mm). A. oryzae was significantly inhibited at 75µg/mL (26.33mm) and 50µg/mL (20.33mm). 1000µl demonstrated 100% phytotoxicity, 100µl 60% and 10µl 50%. Bactrocera cucurbitae, Sitotroga cerealella and Callosobruchus maculatus were killed at 150, 100 and 75µl. Metabolites and antibiotics synergized well. Metabolites have alkanes, esters and ethers in their infrared spectra.

Solution processed bismuth oxyiodide (BiOI) thin films and solar cells.

Post transition metal chalcohalides are an emerging class of semiconductor materials for optoelectronic applications. Within this class, bismuth oxyiodide (BiOI) is of particular interest due to its high environmental stability, low toxicity, and defect tolerance considered typical of 'ns2' materials. Here we fabricate BiOI thin films using a solution-processed method that affords pin-hole free highly pure films without any residual carbon or other contaminant species. Based on these films, solution processed all-inorganic solar cells with an architecture ITO/NiOx/BiOI/ZnO/Al are fabricated for the first time. Additional device improvements are realised by templating BiOI thin film growth to attain efficiencies that rival some of the best vacuum deposited devices. The BiOI thin films and devices outlined here are an excellent platform for the further development of solution processed bismuth chalcohalide optoelectronic devices.

Characterization of Bioactives and Nutra-Pharmaceutical Potential of Supercritical Fluid and Hydro-Distilled Extracted Coriander Leaves Essential Oil.

The volatiles chemical composition and biological attributes of coriander (Coriandrum sativum L.) leaves essential oil obtained by two extraction techniques namely supercritical fluid extraction and hydro-distillation is appraised. The coriander essential oil yield (.12%) by hydro-distillation was slightly higher than that of supercritical fluid extraction (.09%). The physico-chemical variables of the essential oil obtained from both the techniques varied in significantly (P < .05). GC-MS analysis identified 23 different components in supercritical fluid extracted oil and 18 components in hydro-distilled essential oil having linalool as major component (51.32% and 61.78%, respectively) followed by phytol (12.71%). The oil recovered by supercritical fluid extraction exhibited greater DPPH radical scavenging activity as well as reducing power as compared to the essential oil obtained by hydro-distillation technique along with a stronger biofilm inhibition and least hemolysis. The results of antimicrobial activity revealed that super critical fluid extracted essential oil has potent antifungal and antibacterial activity against P. multocida and A alternata, whereas hydro-distilled essential oil displayed better antimicrobial potential against E coli and A niger. Overall, these results depict that supercritical fluid extraction is superior than hydro-distillation with regard to isolation of better-quality coriander essential oil for nutra-pharmaceutical developments.

Surface enhanced Raman spectroscopy of RNA samples extracted from blood of hepatitis C patients for quantification of viral loads.

BACKGROUND: Raman spectroscopy is a promising technique to analyze the body fluids for the purpose of non-invasive disease diagnosis. OBJECTIVES: To develop a surface-enhanced Raman spectroscopy (SERS) based method for qualitative and quantitative analysis of HCV from blood samples. METHODS: SERS was employed to characterize the Hepatitis C viral RNA extracted from different blood samples of hepatitis C virus (HCV) infected patients with predetermined viral loads in comparison with total RNA of healthy individuals. The SERS measurements were performed on 27 extracted RNA samples including low viral loads, medium viral loads, high viral loads and healthy/negative viral load samples. For this purpose, silver nanoparticles (Ag NPs) were used as SERS substrates. Furthermore, multivariate data analysis technique, Principal Component Analysis (PCA) and Partial Least Square Regression (PLSR) were also performed on SERS spectral data. RESULTS: The SERS spectral features due to biochemical changes in the extracted RNA samples associated with the increasing viral loads were established which could be employed for HCV diagnostic purpose. PCA was found helpful for the differentiation between Raman spectral data of RNA extracted from hepatitis infected and healthy blood samples. PLSR model is established for the determination of viral loads in HCV positive RNA samples with 99 % accuracy. CONCLUSION: SERS can be employed for qualitative and quantitative analysis of HCV from blood samples.

Quantitative analysis of solid dosage forms of cefixime using Raman spectroscopy.

Quantification of antibiotics is of significant importance because of their use in the prevention and treatment of different diseases. Cefixime (CEF) is a cephalosporin antibiotic that is used against bacterial infections. In the present study, Raman spectroscopy has been applied for the identification and quantification of Raman spectral features of cefixime with different concentrations of Active Pharmaceutical Ingredient (API) and excipients in solid dosage forms. The changes in Raman spectral features of API and excipients in the solid dosage forms of cefixime were studied and Raman peaks were assigned based on the literature. Multivariate data analysis techniques including the Principal Component Analysis (PCA) and Partial Least Squares Regression analysis (PLSR) have been performed for the qualitative and quantitative analysis of solid dosage forms of cefixime. PCA was found helpful in differentiating all the Raman spectral data associated with the different solid dosage forms of cefixime. The coefficient of determination (R2), mean absolute error (MAE), and mean relative error (MRE) for the calibration data-set were 0.99, 0.72, and 0.01 respectively and for the validation data-set were 0.99, 3.15, and 0.02 respectively, that shows the performance of the model. The root mean square error of calibration (RMSEC) and root mean square error of prediction (RMSEP) were found to be 0.56 mg and 3.13 mg respectively.

Raman spectral characterization of silver metal-based complexes of different benzimidazolium ligands.

In this study, Raman spectroscopy has been employed for the characterization of two structurally different monodentate N-heterocyclic carbene ligands (ligand-1 and ligand-2) and their respective complexes (complex-1 and complex-2). The Raman spectral features are found helpful for the confirmation of formation of complexes. The significant Raman spectral features are identified for benzimidazole ring with higher intensities in carbene complexes having more polarizability as compared to their ligands, providing the evidence for the formation of coordinate covalent bond. The successful complexation is further supported by using multivariate data analysis technique, Principal Component Analysis (PCA), which is found very helpful to highlight the variability of Raman spectral data of both ligands and their respective metal complexes from each other. Moreover, the coordination of carbene with Ag(I) is confirmed from the dominant spectral markers of higher intensities at 359 cm-1 in complex-1 and 338 cm-1 in complex-2. The effective and reliable characterization and confirmation of metal complexes indicates the potential of Raman spectroscopy for its use for the characterization of the organometallic complexes and other chemical products.

Raman spectroscopy along with Principal Component Analysis for the confirmation of Silver(I)-N-heterocyclic carbene complex formation.

In this study Raman spectroscopy is employed for the characterization of two different ligands called as S1 and S2 and their respective co-ordinate complexes called C1 and C2. Specific Raman spectral signatures are observed for each of these Silver(I)-N-heterocyclic carbene complexes Ag(I)-(NHCs), which can be associated with the imidazolium ring, part of both of the ligands, indicating the formation of new coordinate covalent bond. For the detailed analysis, Raman spectral data of these ligands and complexes is analyzed by multivariate data analysis technique, Principal Component Analysis (PCA) which is found very helpful to differentiate two ligands and complexes from each other. The significant Raman peaks with higher intensities in the complexes as compared to the respective ligands are associated with imidazole ring which can be attributed to the enhanced polarizability of this ring on complex formation. Moreover, the spectral features associated with (AgC) bond are observed with higher intensity at 360 in (C1) and 383 in (C2). This study indicates the potential of Raman spectroscopy for the characterization and confirmation of formation of organometallic complexes and other chemical products.

Risk factors for coronary heart disease in patients below 45 years of age.

OBJECTIVE: To examine the traditional risk factors and biochemical profile of patients with established CAD (coronary artery disease), and compare the trends of these in specified age groups of different populations as depicted in various studies. METHODOLOGY: All consecutive patients below 45 years of age, having classical history of Ischemic heart disease and also having definite ECG changes consistent with coronary artery disease were enrolled. These patients were admitted to CCU/Intermediate Coronary Care Unit of Pakistan Ordinance Factories (POF) Hospital Wah Cantonment from April 2007 to December 2011. Patients who had doubtful history as regards CHD and those having ECG changes not classically consistent with CAD were excluded. Information collected through Performa included history including family history and details of risk factors. Clinical examination was carried out and relevant investigations including the serial ECG changes were recorded. Blood samples were collected after an overnight fast of 14 hours and tests were done for total cholesterol and HDL cholesterol by using Pioneer-USA, linear chemical kits by cholesterol oxidase and enzymatic calometric method. RESULTS: A total of 109 cases were included. Cigarette smoking (46%) Family history (43%), Hypertension (37%), Dyslipidemia (33%), Diabetes mellitus (18%) and above normal BMI (63.3%) are the most common risk factors in our patients. Increased abdominal girth has appeared to be an important risk factor and at occasions is documented to be independent of obesity. Casual dietary habits and sedentary life style are the other less important risk factors. The majority of risk factors were equally prevalent in males as well as females except smoking which was less prevalent in females. CONCLUSIONS: Our study shows that Family history, Smoking, Hypertension, increased BMI, increased Abdominal girth, Dyslipidemia and Diabetes Mellitus are the main risk factors. Considering the increasing incidence of the coronary heart disease in our society it is essential to assess and evaluate these risk factors at national level.