Mini-cores of activated carbon block simulate full-sized performance for removing organics and arsenate from drinking water✰.

Activated carbon block (ACB) filters are widely used in point-of-use (POU) drinking technology to remove tastes, odors, and organic compounds from drinking water, and when modified can even remove inorganic pollutants (e.g., arsenate, lead, copper). To introduce ACB technologies to the POU market, thorough assessment and testing are required to meet the National Sanitary Foundation 53 certification. Testing to gain this certification can be costly and time-consuming and is usually only done on the final product before commercial distribution. We developed and explored how a cylindrical "plug" cored from an ACB can be used in a mini-core apparatus with low water volumes, to mimic full-sized ACB performance. These mini-cores allow the same outside-in radial flow conditions as the full-sized ACB. After addressing potential hydraulic channeling problems, tests with chloroform or arsenate confirmed the ability of the mini-core ACB "plugs" to mimic the performance of full-sized cartridge unit. The benefit of the mini-core ACB "plug" lab-scale approach lays the foundation for testing methodologies that can evaluate a range of pollutants, water chemistries, or material modifications using a small fraction of water compared to full-sized ACB filter. Overall, the development of a mini-core ACB testing apparatus is a key advancement towards sustainable water purification, impacting environmental health, resource conservation, and global access to safe water.

Sorption-based atmospheric water harvesting for continuous water production in the built environment: Assessment of water yield and quality.

Sorption-based atmospheric water harvesting (SAWH) is a promising solution for localized high-quality water production. Application of SAWH indoors offers dual benefits of on-site water generation and humidity control. This study evaluated the use of SAWH for water production in residential or office buildings, employing a portable zeolite-based SAWH device. Over the twelve-month testing period in the arid southwestern USA, the device achieved a median water yield of 3.6 L/day at a cost 30 % less than bottled water sold in the U.S. A mathematical model was developed for predicting water yield under different temperature and relative humidity (RH) conditions. Daily water yields were well fitted with the modified Langmuir model, with absolute humidity serving as the only prediction variable. Water extracted from a well-ventilated office building generally met the drinking water standards set by USEPA. However, elevated levels of dissolved organic carbon (DOC) were detected in the samples collected from the residential house (median = 32.6 mg/L), emphasizing the influence of human activities (e.g., cooking) on the emission of volatile and semi-volatile organic compounds in the air, which consequently reside in harvested water. Aldehydes and volatile fatty acids (formate, acetate) comprised roughly 50 % of the DOC found in the AWE water. A carbon fiber filter was not effective at removing these substances, highlighting the need for further research into effective treatment methods for DOC management before the safe use of AWE water. Overall, this study provides critical insights for the practical application of indoor SAWH as a decentralized source of high-quality water and emphasizes the need to identify and manage DOC for its safe use.

Sous Vide-Inspired Impregnation of Amorphous Titanium (Hydr)Oxide into Carbon Block Point-of-Use Filters for Arsenic Removal from Water.

Carbon block filters, commonly employed as point-of-use (POU) water treatment components, effectively eliminate pathogens and adsorb undesirable tastes, odors, and organic contaminants, all while producing no water waste. However, they lack the capability to remove arsenic. Enabling the carbon block to remove arsenic could reduce its exposure risks in tap water. Inspired by Sous vide cooking techniques, we developed a low-energy, low-chemical method for impregnating commercially available carbon block with titanium (hydr)oxide (THO) in four integrated steps: (1) vacuum removal of air from the carbon block, (2) impregnation with precursors in a flexible pouch, (3) sealing to prevent oxygen intrusion, and (4) heating in a water bath at 80 °C for 20 h to eliminate exposure and reactions with air. This process achieved a uniform 13 wt % Ti loading in the carbon block. Our modified carbon block POU filter efficiently removed both arsenate and arsenite from tap water matrices containing 10 or 100 µg/L arsenic concentrations in batch experiments or continuous flow operations. Surprisingly, the THO-modified carbon block removed arsenite better than arsenate. This innovative method, using 70% fewer chemicals than traditional autoclave techniques, offers a cost-effective solution to reduce exposure to arsenic and lower its overall risk in tap water.

Mechanistic Study of Arsenate Adsorption onto Different Amorphous Grades of Titanium (Hydr)Oxides Impregnated into a Point-of-Use Activated Carbon Block.

Millions of households still rely on drinking water from private wells or municipal systems with arsenic levels approaching or exceeding regulatory limits. Arsenic is a potent carcinogen, and there is no safe level of it in drinking water. Point-of-use (POU) treatment systems are a promising option to mitigate arsenic exposure. However, the most commonly used POU technology, an activated carbon block filter, is ineffective at removing arsenic. Our study aimed to explore the potential of impregnating carbon blocks with amorphous titanium (hydr)oxide (THO) to improve arsenic removal without introducing titanium (Ti) into the treated water. Four synthesis methods achieved 8-16 wt.% Ti loading within the carbon block with 58-97% amorphous THO content. The THO-modified carbon block could adsorb both oxidation states of arsenic (arsenate and arsenite) in batch or column tests. Modified carbon block with higher Ti and amorphous content always led to better arsenate removal, achieving arsenic loadings up to 31 mg As/mg Ti after 70,000 bed volumes in continuous flow tests. Impregnating carbon block with amorphous THO consistently outperformed impregnation using crystalline TiO2. The best-performing system (TTIP-EtOH carbon block) was an amorphous THO derived using titanium isopropoxide, ethanol, and acetic acid via sol-gel technique, aged at 80° for 18 hours and dried overnight at 60°. Comparable pore size distribution and surface area of the impregnated carbon blocks suggested that chemical properties play a more crucial role than physical and textural properties in removing arsenate via amorphous Ti-impregnated carbon block. Freundlich isotherms indicated energetically favorable adsorption for amorphous chemically synthesized adsorbents. The mass transport coefficients for the amorphous TTIP-EtOH carbon block were fitted using a pore surface diffusion model, resulting in Dsurface = 3.1×10-12 cm2/s and Dpore = 3.2×10-6 cm2/s. Impregnating the carbon block with THO enabled effective arsenic removal from water without adversely affecting the pressure drop across the unit or the carbon block's ability to remove polar organic chemical pollutants efficiently.

Direct Ink Writing of Metal Oxide/H-ZSM-5 Catalysts for n-Hexane Cracking: A New Method of Additive Manufacturing with High Metal Oxide Loading.

Previously, 3D printing of porous materials and metal oxides was limited to low loading metal loadings, as increasing the nitrate salt concentrations, which are used to generate the oxide component, gave rise to poor rheological properties beyond 10 wt %. In this study, we addressed this problem by directly printing insoluble oxides alongside H-ZSM-5 zeolite, which allowed for increased oxide loadings. Various metal oxides such as V2O5, ZrO2, Cr2O3, and Ga2O3 were doped onto H-ZSM-5 through the additive manufacturing method. Characterization and correlation between the X-ray diffraction, NH3-temperature-programmed desorption, O2-temperature programmed oxidation, temperature-programmed reduction, scanning electron microscopy-energy dispersive spectroscopy, and in situ CO2 DRIFTS experiments revealed that directly 3D printing metal oxides/H-ZSM-5 inks leads to significant modification in the surface properties and oxide bulk dispersion, thereby enhancing the composites' reducibility and giving rise to widely differing product distributions in n-hexane cracking reaction. The obtained metal oxide/zeolite structured materials were used as bifunctional structured catalysts for the selective formation of light olefins from hexane at 550-600 °C and GHSV = 9000 mL/gcatalst·h in a packed-bed reactor. Among the various compositions of metal oxides/H-ZSM-5 examined (i.e., 15 wt % Ga2O3, 15 wt % ZrO2, 15 wt % V2O5, 15 wt % Cr2O3, or 5 wt % Cr/10 wt % ZrO2/10 wt % V2O5/10 wt % Ga2O3 balanced with H-ZSM-5), the 15 wt % Cr/ZSM-5 monolith displayed the best n-hexane cracking performance, as it achieved 80-85% conversion of hexane with a 40% selectivity toward propylene, 30% selectivity toward ethylene, and 10% selectivity toward butene at 550 °C. The sample also showed zero benzene/toluene/xylene selectivity and no deactivation after 6 h. This study represents a proof-of-concept for tailoring customizable heterogeneous structured catalysts by directly 3D printing high loading of metal oxides/porous zeolite and is a breakthrough in material science.