ABSTRACT
Background: Remineralization of dental enamel is an important intervention strategy for the treatment of demineralized lesions. Existing approaches have limitations such as failure to adequately reproduce both the ideal structural and mechanical properties of the native tooth. The ability of ultrasound to control and accelerate the crystallization processes has been widely reported. Therefore, a new approach was explored for in-vitro enamel remineralization involving the synergistic effect of high-intensity focused ultrasound (HIFU) coupled with calcium phosphate ion clusters (CPICs). Methods: The demineralized enamel was treated with CPICs, with or without subsequent HIFU exposure for different periods (2.5, 5, and 10 min). The specimens were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), and Raman spectroscopy. The surface hardness and crystallographic properties of the treated specimens were evaluated using Vickers microhardness testing and X-ray diffraction (XRD), respectively. Results: SEM revealed distinct, organized, and well-defined prismatic structures, showing clear evidence of remineralization in the combined CPIC/HIFU treatment groups. AFM further revealed a decrease in the surface roughness values with increasing HIFU exposure time up to 5 min, reflecting the obliteration of interprismatic spaces created during demineralization. The characteristic Raman band at 960 cm-1 associated with the inorganic phase of enamel dominated well in the HIFU-treated specimens. Importantly, microhardness testing further demonstrated that new mineral growth also recovered the mechanical properties of the enamel in the HIFU-exposed groups. Critical to our aspirations for developing this into a clinical process, these results were achieved in only 5 min. Conclusion: HIFU exposure can synergise and significantly accelerate in-vitro enamel remineralization process via calcium phosphate ion clusters. Therefore, this synergistic approach has the potential for use in future clinical interventions.
Subject(s)
Calcium Phosphates , Dental Enamel , Microscopy, Atomic Force , Tooth Remineralization , Calcium Phosphates/chemistry , Calcium Phosphates/pharmacology , Dental Enamel/drug effects , Dental Enamel/chemistry , Tooth Remineralization/methods , Spectrum Analysis, Raman , Microscopy, Electron, Scanning , Hardness , Surface Properties , Humans , Tooth Demineralization/therapy , X-Ray Diffraction , Animals , CattleABSTRACT
Although high-intensity focused ultrasound (HIFU) has been applied widely in medicine, utilising its non-invasive dual ablation and thermal coagulation properties, its application in dentistry has primarily remained in the research phase, predominantly in in vitro studies. Nonetheless, there has been a consistent increase in the number of publications on this subject in recent decades, focusing on areas such as remineralisation of dentine surfaces, removal of smear layers, drug delivery, and microbial elimination. The number of advantages HIFU can offer, such as its non-surgical nature, absence of ionising radiation, lack of residue, and absence of aerosols, is driving this upward trend, indicating the potential for HIFU in clinical dentistry and ongoing efforts towards developing HIFU-based devices for routine dental use. This succinct review aims to outline the historical context, operational mechanisms of HIFU, summarise recent dental research, and provide a forward-looking perspective on the role of HIFU in modern clinical dentistry.
ABSTRACT
OBJECTIVE: The high incidence of endodontic failure is associated with the remnants of Enterococcus faecalis present within the intricate anatomies of the root canal system (RCS), often inaccessible by the current endodontic practices. This study was aimed at evaluating the effect of high-intensity focused ultrasound (HIFU) and photodynamic therapy (PDT) on E. faecalis biofilms in artificially infected root canals for the potential application in current endodontic practices. METHODS: Forty-five single-rooted extracted teeth were instrumented using hand files, sterilized in an autoclave, infected with E. faecalis and incubated for 4 wk. The specimens were treated and identified as follows: Control, 4% sodium hypochlorite (NaOCl); riboflavin (1 mg/mL); light only; HIFU (250 kHz, 20 W, 60s); PDT; riboflavin/HIFU; light/HIFU; and riboflavin/HIFU/light. Bactericidal efficacy was determined by colony-forming units (CFU), (3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide) (MTT) assay, scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM). RESULTS: Enterococcus faecalis biofilm exhibited significantly lower metabolic activity when treated with HIFU (250 kHz, 20 W, 60 s) compared with the control (4% NaOCl) and PDT groups. A similar phenomenon was observed with the CFU assay. HIFU remained the most effective treatment modality, with consistent results in CLSM and SEM. CONCLUSION: This study highlighted the potential application of HIFU as an adjunct drug-free, non-destructive root canal disinfection method for endodontic treatment, suggesting an alternative to the current gold standard of 4% NaOCl and PDT.
Subject(s)
Photochemotherapy , Photochemotherapy/methods , Enterococcus faecalis , Dental Pulp Cavity , Riboflavin/pharmacology , Anti-Bacterial Agents , BiofilmsABSTRACT
The aim is to evaluate the development of an experimental multi-mode/Universal resin-based dentin adhesive modified with synthetic Mg2+ doped hydroxyapatite crystals (HAp) having self-remineralization and antibiofilm properties. HAp doped with Mg2+ was prepared by the precipitation method. Experimental adhesives were subjected to degree of conversion and X-ray diffraction test for size and crystal structure. Bond strength was tested, and electron microscopy (SEM/TEM) imaging of resin-dentin interface was done along with nanoleakage, nanoindentation, confocal and Raman analyses. S. mutans was analysed using CLSM images against modified adhesive specimens. Nucleating abilities within the resin-dentin specimens are determined by measuring Ca2+. Alkaline phosphatase, Runx2, and Ocn transcripts are amplified using quantitative polymerase chain reaction (q-PCR). A calcium assay is performed to quantify level of mineralisation. When compared to control adhesives, the 0.5% Hap/Mg2+ containing experimental dentin adhesive demonstrated improved interaction with dentin. The preservation of uniform intact hybrid layer with the absence of nanoleakage indicated dentin bond integrity with 0.5% HAP/Mg2+ modified adhesive. Self-remineralization and antibiofilm potentials are supported.
Subject(s)
Dental Bonding , Magnesium , Magnesium/analysis , Dentin/chemistry , Resin Cements/chemistry , Tensile Strength , Adhesives/analysis , Hydroxyapatites , Dentin-Bonding Agents/chemistry , Materials Testing , Dental CementsABSTRACT
OBJECTIVE: The objective of this study was to evaluate the resin-ceramic adhesion of a long-carbon-chain silane (LCSI)-containing resin cement. METHODS: Polished lithium disilicate ceramic discs were etched with hydrofluoric acid and randomly assigned into four groups; (PSAP), cemented using a silane-free resin cement with no prior priming; (PSAP-S), primed using a silane-containing primer before cementation using a silane-free resin cement; (PSAU), cemented using a LCSI-containing resin cement with no prior priming; (PSAU-S), primed as for the group (PSAP-S) and cemented using a LCSI-containing resin cement. The cemented blocks were sectioned into microbeams. The resin-ceramic microtensile bond strength (µTBS) was measured at 1 week and after thermocycling. The failure modes of the tested microbeams were evaluated. RESULTS: The µTBS of the LCSI-containing and silane-free resin cements, either with or without a prior priming step, did not significantly differ. The adhesion of the LCSI-containing resin cement to lithium disilicate ceramic, either with or without a prior priming step, did not significantly deteriorate after artificial aging. CONCLUSIONS: The long-carbon-chain silane (LCSI) monomer incorporated in the resin cement eliminated the need for a silane priming step of a hydrofluoric acid-etched lithium disilicate ceramic.
ABSTRACT
OBJECTIVES: Oral prosthetic rehabilitation has been used for a long time to restore function and natural appearance; however, it is still one of the most challenging areas in dentistry due to its technical fabrication process and biological behavior. Considering the advantages of additive manufacturing technology, this study introduced the feasibility of developing a 3D printed resin-based composition modified with graphene nanoplatelets (GNPs) to improve properties. METHODS: Acrylate-based resin was impregnated with different concentrations of GNPs (0.0-0.25 wt%), and then different aspects such as mechanical, physical, biological and antimicrobial were analyzed to evaluate the effectiveness. TEM and SEM were used to characterize GNPs and their existence within the resin. Surface topography and roughness were evaluated using AFM. The degree of conversion and composition were confirmed by FTIR. Mechanical properties were detected using bending strength, microhardness and nanoindentation. Biocompatibility and antimicrobial activities were assessed with oral fibroblast and Candida albicans (C. albicans), respectively. In addition, most of the measurements were performed repeatedly after 3 months of storage in artificial saliva to evaluate performance. RESULTS: GNPs improved strength significantly at low concentrations ≤ 0.05 wt%, while the addition up to 0.25 wt% enhanced printed nanocomposite hardness and elasticity. The modification did not induce a toxic response, as its biocompatibility was within the recommended range of biomedical devices. Antimicrobial activity was of prominence, as GNPs showed an outstanding route of reducing C. albicans activity associated with filler proportion. SIGNIFICANCE: The embedment of GNPs in 3D printed resin can become a key material for customized applications that require high antimicrobial, stiffness and strength properties.
Subject(s)
Anti-Infective Agents , Graphite , Nanocomposites , Graphite/pharmacology , Surface Properties , Materials Testing , Candida albicans , Resins, Synthetic , Printing, Three-Dimensional , Anti-Infective Agents/pharmacologyABSTRACT
Severe acute respiratory syndrome-coronavirus-2 (SARS-CoV-2) is a global and evolving pandemic associated with heavy health and financial burdens. Considering the oral cavity as the major reservoir for SARS-CoV-2, a systematic review and meta-analysis were conducted to assess the efficacy of mouth rinses and nasal sprays in reducing the salivary viral load of SARS-CoV-2. All in vivo and in vitro studies that assessed the virucidal efficacy of mouth rinses and nasal sprays against SARS-CoV-2 and were published in the English language from December 2019 to April 2022 were considered for analyses. Special Medical Subject Headings terms were used to search Pubmed, Scopus, Embase Ovid, and Web of Science databases. The toxicological data reliability assessment tool (ToxRToool) was used to assess the quality of the included studies. Thirty-three studies (11 in vivo and 22 in vitro) were deemed eligible for inclusion in this analysis. Results of the pooled data showed that povidone-iodine is the most efficacious intervention in vivo in terms of reducing the SARS-CoV-2 salivary viral load, followed by chlorhexidine. The mean difference in the viral load was 86% and 72%, respectively. Similarly, povidone-iodine was associated with the highest log10 reduction value (LRV) in vitro, followed by cetylpyridinium chloride, (LRV = 2.938 (p < 0.0005) and LRV = 2.907 (p = 0.009), respectively). Povidone-iodine-based oral and nasal preparations showed favourable results in terms of reducing SARS-CoV-2 viral loads both in vivo and in vitro. Considering the limited number of patients in vivo, further studies among larger cohorts are recommended.
Subject(s)
COVID-19 , SARS-CoV-2 , Cetylpyridinium , Chlorhexidine , Humans , Mouthwashes/pharmacology , Nasal Sprays , Povidone-Iodine/pharmacology , Reproducibility of ResultsABSTRACT
The aim of this study is to develop a novel 3D printed denture base resin material modified with mesoporous silica nanocarrier loaded with silver (Ag/MSN) to enhance mechanical and antimicrobial properties. Acrylate resin-based was incorporated with various proportion of Ag/MSN (0.0-2.0 wt%). Specimens with different geometry were printed and characterized accordingly for the effect of modification on properties such as: mechanical and physical properties, chemical composition and degree of conversion, as well as biological response in term of biocompatibility and antimicrobial against oral fibroblast and candida biofilm (C. albicans), respectively. The consecutive addition of Ag/MSN improved significantly surface hardness and crack propagation resistance, while flexural strength remained similar to control; however, a negligible decrease was observed with higher concentrations ≥1 wt%. No significant difference was noticed with water sorption, while water solubility had a remarkable trend of reduction associated with filler content. The surface roughness significantly increased when concentration of Ag/MSN was ≥1.0 wt%. A significant reduction in C. albicans biofilm mass, as the inhibition proficiency was correlated with the proportion of the filler. With respect to the amount of Ag/MSN, the modification was compatible toward fibroblast cells. The sequential addition of Ag/MSN enhanced significantly the mechanical and antimicrobial properties of the 3D printed resin-based material without affecting adversely compatibility. The acrylic resin denture base material has susceptibility of microbial adhesion which limits its application. Silver loaded MSN showed a significant performance to enhance antimicrobial activity against C. albicans which is the main cause of denture stomatitis. The proposed invention is a promise technique for clinical application to provide an advanced prosthesis fabrication and serve as long-term drug delivery.
Subject(s)
Anti-Infective Agents , Nanoparticles , Anti-Bacterial Agents/pharmacology , Anti-Infective Agents/pharmacology , Candida albicans , Denture Bases , Polymethyl Methacrylate/chemistry , Printing, Three-Dimensional , Silicon Dioxide/chemistry , Silver/pharmacology , Surface Properties , Water/pharmacologyABSTRACT
OBJECTIVE: The aim of the current study is to evaluate the remineralization potential of experimental tricalcium silicate (TCS) paste in comparison with more popular remineralizing agents like silver diamine fluoride potassium iodide (SDF-KI) and casein phosphopeptide amorphous calcium phosphate (CPP-ACP) on early enamel lesions. MATERIALS AND METHODS: Forty-five patients in the age range of 15-50 years had early enamel lesions on the buccal surface of molar teeth. The patients were randomly divided into three treatment groups (SDF-KI, CPP-ACP, and TCS group) with 15 patients per group. Lesions were evaluated clinically by DIAGNOdent pen immediately and after 3,6,12, and 24 months of treatment. RESULTS: The study was completed with 45 patients and 92 teeth. Twice-daily application of CPP-ACP and TCS paste showed a significant remineralization effect on early enamel lesions after 24 months (p < 0.001). Also, annual application of SDF-KI showed a significant remineralization effect after 24 months (p < 0.001). There was a significant difference between (SDF-KI and CPP-ACP) and (SDF-KI and TCS) at the different follow-up periods 3,6,12, and 24 months (p < 0.001). Meanwhile, there was no significant difference between CPP-ACP and TCS at the mentioned follow-up periods (p > 0.05). CONCLUSION: TCS showed potential remineralization for early enamel lesions. CLINICAL RELEVANCE: Experimental TCS is a promising remineralizing agent for management of early enamel lesions.
Subject(s)
Caseins , Tooth Remineralization , Adolescent , Adult , Calcium Compounds , Caseins/therapeutic use , Dental Enamel , Humans , Middle Aged , Phosphopeptides , Potassium Iodide , Silicates , Young AdultABSTRACT
OBJECTIVE: The aim of this study was to investigate the potential antimicrobial and cytotoxic effect of modified 3D printed resin with ZrO2 nanoparticles, as long-term provisional restoration. In addition, the study involved artificial aging process for three months to observe stability of 3D printed resin. METHODS: Functionalized ZrO2 nanoparticles with γ-MPS were characterized using transmission electron microscopy, scanning electron microscope and Fourier-transform infrared spectroscopy. Dental resin was incrementally impregnated with γ-MPS modified nanoparticles at different concentrations (0, 1, 3, and 5 wt%). Specimens were printed, post-cured and placed in artificial saliva at 37 oC for 48 h or aged for 3 months. Discrepancy in composition and roughness were monitored using FTIR and AFM, respectively. Biocompatibility was evaluated using human oral fibroblasts. Antimicrobials capacity and biofilm adhesion were measured with Streptococcus mutans and Candida albicans. RESULTS: The microscopic and spectroscopic analyses confirmed γ-MPS coating around ZrO2 nanoparticles. The addition of nanoparticles (>1 wt%) significantly increased the surface roughness. Cytotoxicity results were in agreement with the recommended range of oral biomaterials standard. Moreover, the antimicrobial activity significantly improved with increasing the filler concentration. Despite the decrease in antimicrobial efficacy after 3 months of aging, modified resin revealed a critical ability to dominate biofilm formation. SIGNIFICANCE: The addition of ZrO2 nanoparticles showed significant antimicrobial capability of a 3D printed resin without inducing any cellular side effects. Thus, the modification of a 3D printed resin with ZrO2 nanoparticles has a promising future in the dental field for fabricating long-term provisional restorations.
Subject(s)
Anti-Infective Agents , Nanoparticles , Aged , Anti-Bacterial Agents/pharmacology , Anti-Infective Agents/pharmacology , Candida albicans , Humans , Materials Testing , Nanoparticles/chemistry , Printing, Three-Dimensional , Streptococcus mutans , Surface PropertiesABSTRACT
To evaluate the remineralization potential of prepared tricalcium silicate (TCS) paste compared to silver diamine fluoride-potassium iodide (SDF-KI) and casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) on artificial enamel lesions. Thirty permanent sound molars were collected for the study. After cleaning, root cutting, and applying acid-resistant nail varnish, leaving a 4 × 4 mm buccal window, the teeth were subjected to demineralization process. The teeth were divided into three treatment groups (n = 10). In each group, the teeth were sectioned buccolingually to obtain two halves (30 self-control and 30 experimental halves). The self-control halves were subjected to cross-sectional microhardness (CSMH), energy-dispersive X-ray spectroscopy at 50, 100, and 150 µm from the external enamel surface, and micromorphological analysis at the superficial enamel surface. The experimental halves were subjected to the same tests after 30 days of remineralization. Three-way analysis of variance (ANOVA) outcomes showed no significant difference in CSMH after treatment among the three different groups at the different levels (p > 0.05). Meanwhile, three-way ANOVA outcomes showed a significant difference in calcium/ phosphate ratio after treatment among the three different groups at the different levels. (p < 0.05). The tricalcium silicate paste used in this study showed potential remineralization in subsurface enamel lesions.
Subject(s)
Caseins , Tooth Remineralization , Calcium Compounds , Dental Enamel , Molar , Silicates , Tooth Remineralization/methodsABSTRACT
OBJECTIVE: The aim of this study was to synthesize and characterize reduced nano graphene oxide (RGO) and graphene nanoplatelets (GNPs) doped with silver nanoparticles (nAg) and to prepare an experimental dentin adhesive modified with RGO/nAg and GNP/nAg nanofillers for studying various biological and mechanical properties after bonding to tooth dentin. METHODS: Nanoparticles were characterized for their morphology and chemical structure using electron microscopy and infrared spectroscopy. Experimental dentin adhesive was modified using two weight percentage (0.25% and 0.5%) of RGO/nAg and GNP/nAg to study its degree of conversion (DC), antimicrobial potential, and cytotoxicity. The effect and significance of these modified bonding agents on resin-dentin bonded interface were investigated by evaluating interfacial nanoleakage, micropermeability, nanodynamic mechanical analysis, micro-tensile bond strength (µTBS), and four-point bending strength (BS), RESULTS: Both 0.25% and 0.5% GNP/nAg graphene-modified adhesives showed comparable DC values to the commercial and experimental adhesive (range: 42-46%). The bacterial viability of the groups 0.25% and 0.5% GNP-Ag remained very low under 25% compared to RGO/nAg groups with low cytotoxicity profiles (cell viability>85%). Resin-bonded dentin interface created with GNP/nAg showed homogenous, well-defined hybrid layer and regularly formed long resin tags devoid of any microporosity as evidenced by SEM and confocal microscopy. The lowest nanoleakage and highest bending strength and µTBS was recorded for 0.25% GNP/nAg after 12 months of ageing. A significantly increased nanoelasticity was seen for all experimental groups except for control groups. SIGNIFICANCE: The addition of 0.25% GNP/nAg showed optimized anti-biofilm properties without affecting the standard adhesion characteristics.
Subject(s)
Dental Bonding , Graphite , Metal Nanoparticles , Biofilms , Dentin , Dentin-Bonding Agents/chemistry , Dentin-Bonding Agents/pharmacology , Graphite/pharmacology , Materials Testing , Metal Nanoparticles/chemistry , Microscopy, Electron, Scanning , Resin Cements/chemistry , Silver/chemistry , Silver/pharmacology , Surface Properties , Tensile StrengthABSTRACT
OBJECTIVE: This study investigated the effect of post curing light exposure time on the physico-mechanical properties and cytotoxicity of a 3D-printed PMMA-based denture material in comparison to a conventional heat-cured alternative as a control. METHODS: 3D-printed specimens were fabricated followed by post-curing for 0, 5, 10 or 20 min at 200 W and light wavelength range of 390-540 nm. Heat-cured specimens were fabricated using a standard protocol. Specimens were placed in artificial saliva at 37 â for 48 h (immediate groups) and 6 months (aged group), then evaluated flexural strength/modulus, fracture toughness, microhardness, and degree of conversion. Water sorption and solubility was assessed after 28 days. Flexural strength, flexural modulus, and fracture toughness were tested through three-point bending tests, while the surface hardness was tested using Vickers's test. Fractured specimens were viewed by scanning electron microscope (SEM). Cytotoxicity in term of cell viability was evaluated using human oral fibroblasts. RESULTS: Flexural strength/modulus, fracture toughness and surface hardness significantly improved with the increase in light curing time up to 20 min. The same pattern of improvement was found with degree of conversion, water sorption, solubility, and cell viability. There was no significant difference (p < 0.01) between heat-cured material and 3D specimens post-cured for 20 min in term of flexural strength/modulus, surface hardness, and degree of conversion at the two-storage time points. SIGNIFICANCE: Generally, the physico-mechanical properties of the 3D-printed denture base material improve as post curing time increases up to 20 min which exhibited comparable performance as the conventional heat-cured control.
Subject(s)
Denture Bases , Flexural Strength , Aged , Hardness , Humans , Materials Testing , Pliability , Printing, Three-Dimensional , Surface PropertiesABSTRACT
This study synthesized and characterized graphene nanoplatelets silanized with 3-(trimethoxysilyl)propyl methacrylate (MPS-GNP) for morphological and chemical characteristics. In addition, we modified a dentin bonding agent using different concentrations of MPS-GNP to study its interaction within the resin matrix of the adhesive, degree of conversion (DC), biological, and mechanical properties after bonding to tooth. Both 0.25% and 0.5% MPS-GNP-modified bonding agents showed comparable DC values to the unmodified control adhesive (range: 41%-43%). However, a statistically significant reduction in the DC was found when 0.25% and 0.5% non-silanized GNP was doped with the adhesive (<38%) (p < 0.05). On day 30, the bacterial viability of 0.5% GNP and MPS-GNP groups remained very low under 22% with the highest dead cell count (p < 0.05). GNP incorporated within the resin matrix of the dentin bonding agent showed clear evidence of several interfacial gap formations and non-union between the GNP surface and resin matrix, while the MPS-GNP modified dentin bonding agent showed MPS-GNP with no gap formation with complete union between the graphene surface and resin matrix. The decrease in the µTBS was least pronounced for 0.25% and 0.5% MPS-GNP groups. After 12 months of ageing, the groups 0.25% and 0.5% MPS-GNP also showed the highest BS as compared to the rest of the groups. Statistically significant reduction was seen in nanohardness at the hybrid layer and adhesive layer for GNP groups after 4 months of storage. The addition of up to 0.5% MPS-GNP showed optimized DC, antibiofilm activity, and micro-tensile bond strength without affecting the standard adhesion characteristics as compared to GNP alone.
Subject(s)
Dentin-Bonding Agents , Resin Cements , Blood Platelets , Composite Resins , Dentin , Materials Testing , Surface PropertiesABSTRACT
The aim of this study was to characterize multiscale interactions between high intensity focused ultrasound (HIFU) and dentin collagen and associated matrix-metalloproteinases, in addition to the analysis of the effect of HIFU on bacterial biofilms and biological properties. Dentin specimens were subjected to 5, 10 or 20 s HIFU. XPS spectra were acquired and TEM was performed on dentin slabs. Collagen orientation was performed using Raman spectroscopy. Calcium measurements in human dental pulpal cells (hDPCs) were carried out after 7 and 14 days. For macrophages, CD36+ and CD163+ were analysed. Biofilms were analyzed using CLSM. Tandem mass spectroscopy was performed for the detection of hydroxyproline sequences along with human MMP-2 quantification. Phosphorus, calcium, and nitrogen were detected in HIFU specimens. TEM images demonstrated the collagen network appearing to be fused together in the HIFU 10 and 20 s specimens. The band associated with 960 cm-1 corresponds to the stretching ν1 PO43-. The control specimens showed intensive calcium staining followed by HIFU 20 s > HIFU 10 s > HIFU 5 s specimens. Macrophages in the HIFU specimens co-expressed CD80+ and CD163+ cells. CLSM images showed the HIFU treatment inhibiting bacterial growth. SiteScore propensity determined the effect of HIFU on the binding site with a higher DScore representing better site exposure on MMPs. Multiscale mapping of dentin collagen after HIFU treatment showed no deleterious alterations on the organic structure of dentin.
Subject(s)
Dentin , Tooth , Ultrasonic Waves , Biofilms , Humans , Hydroxyproline , Matrix MetalloproteinasesABSTRACT
To evaluate structural profiles and mechanical behaviour of WaveOne Gold (WOG), Twisted File Adaptive (TFA) and XP-endo shaper (XPS) instruments after root canal preparation. Standardized in vitro shaping was performed in presence of 5.25% sodium hypochlorite. File morphology was analyzed using scanning electron microscopy; X-ray diffraction analysis was performed before and after use along with Raman spectroscopy. Nanoindentation was carried out to characterize surface topography. Ni2+ release was measured at 1, 3, 5 and 7 days. X-ray photoelectron spectroscopy (XPS) analysis was done before and after use. After allocating scan line shifts like in WOG, mechanical deformation was shown using first order polynomials. XPS file system showed minimal grooves on surface. SEM of WOG instrument showed scraping surface defects. Hardness varied from 8.11 ± 0.99 GPa in TFA system to 6.7 ± 1.27 GPa and 4.06 ± 4.1 GPa in XPS and WOG. Ni2+ concentration from WOG was 171.2 µg/L. Raman peak at 540-545 cm-1 is attributed to Cr2O3. High resolution of Ti 2p spectrum show distinctive peaks with binding energies dominating in WOG, XPS and TFA file system. XRD exhibited NiTi phases with diffraction peaks. WOG files showed more surface deterioration and less passive layer formation as compared to TFA and XPS systems.
ABSTRACT
OBJECTIVES: To longitudinally evaluate the periodontal parameters and MMP-8 and CTX (C-terminal crosslinked telopeptide of type I collagen) levels from diseased and healthy sites from cigarette and electronic cigarette (e-cig) smokers and characterize the gingival crevicular fluid (GCF) samples using Raman spectroscopy In addition, to longitudinally determine if MMP-8 and CTX are predictive factors for attachment loss in periodontitis sites. METHODS: Sixty periodontally healthy and 60 periodontitis/diseased sites from 30 e-cig and 30 cigarette smokers were monitored at baseline, 3 months, and 6-months. GCF was sampled to study the MMP-8 and CTX concentrations using enzyme-linked immunosorbent assay. Infra-red absorption spectra of GCF were acquired at all time points and processed to identify key functional groups. RESULTS: A significantly increased attachment loss was observed at 6 months for both smokers when compared with baseline (pâ¯<â¯0.01). This difference was significantly high for cigarette smokers compared with e-cig users (pâ¯<â¯0.01). MMP-8, CTX, smoking pack-years were significantly correlated with probing depth and clinical attachment loss among both e-cig and cigarette smokers. For MMP-8 and CTX, the periodontitis sites showed a statistically significant difference between e-cig and cigarette smokers at both 3- and 6 months follow-up. From baseline to 6 months follow-up, periodontitis sites from both groups showed higher spectral band intensities with deconvulations and Raman shifts for Amide I and Amide II peaks. CONCLUSION: Cigarette smokers showed higher periodontal worsening than e-cig smokers. Smoking, MMP-8, CTX are prognostic factors for clinical attachment loss in cigarette and e-cig smokers. CLINICAL SIGNIFICANCE: Data for Raman scattering and spectral information identifying collagen degradation among e-cig and cigarette smokers have been analyzed. This type of analysis proves a robust diagnostic and prognostic tool for periodontal diseases. Smoking, MMP-8, and CTX are prognostic factors for clinical attachment loss in cigarette and e-cig smokers.
Subject(s)
Electronic Nicotine Delivery Systems , Periodontitis , Tobacco Products , Biomarkers , Humans , Periodontal Attachment Loss , SmokersABSTRACT
BACKGROUND: Compare antimicrobial efficacy of a quarternary ammonium silane (QAS)/k21 as an intracanal medicament against E. faecalis and C. albicans biofilms formed on root dentin. METHODOLOGY: Dentin blocks were sterilized and E. faecalis and C. albicans microbial colonies were counted for colony-forming-units against 2%k21, 2%CHX and Ca(OH)2 medicaments. Biofilm colonies after 7 days on dentin were analysed using confocal laser scanning microscopy with live/dead bacterial viability staining. TEM was done to study dentin collagen matrix. Dentin discs from 3rd day and 7th day well plate was used for Raman spectra and observed under fluorescent-microscope. Docking studies were carried out on MMP-2 S1 binding-domain with k21. RESULTS: There was reduction of E. faecalis/C. albicans when k21, chlorhexidine and calcium hydroxide were used with highest percentage in 2%k21 treated specimens. 2%k21 showed dense and regular collagen network with intact cross-banding and decreased Raman intensity for 2%k21 on 3rd day. NaOCl + k21 showed least adherence, whereas saline groups showed highest adherence of E. faecalis and C. albicans to root-canal dentin. Alizarin red staining of hDPSCs revealed calcium deposition in all groups with significant difference seen amongst 2%k21 groups. MMP-2 ligand binding was seen accurately indicating possible target sites for k21 intervention. CONCLUSION: 2%k21 can be considered as alternative intracanal medicament.
Subject(s)
Ammonium Compounds , Silanes , Biofilms , Calcium Hydroxide , Chlorhexidine/pharmacology , Dental Pulp Cavity , Dentin , Enterococcus faecalis , Humans , Root Canal Irrigants/pharmacologyABSTRACT
Enzymatic biodegradation of demineralized collagen fibrils could lead to the reduction of resin-dentin bond strength. Therefore, methods that provide protection to collagen fibrils appear to be a pragmatic solution to improve bond strength. Thus, the study's aim was to investigate the effect of ribose (RB) on demineralized resin-dentin specimens in a modified universal adhesive. Dentin specimens were obtained, standardized and then bonded in vitro with a commercial multi-mode adhesive modified with 0, 0.5%, 1%, and 2% RB, restored with resin composite, and tested for micro-tensile bond strength (µTBS) after storage for 24 h in artificial saliva. Scanning electron microscopy (SEM) was performed to analyze resin-dentin interface. Contact angles were analyzed using a contact angle analyzer. Depth of penetration of adhesives and nanoleakage were assessed using micro-Raman spectroscopy and silver tracing. Molecular docking studies were carried out using Schrodinger small-molecule drug discovery suite 2019-4. Matrix metalloproteinases-2 (MMP-2) and cathepsin-K activities in RB-treated specimens were quantified using enzyme-linked immunosorbent assay (ELISA). The significance level was set at α = 0.05 for all statistical analyses. Incorporation of RB at 1% or 2% is of significant potential (p < 0.05) as it can be associated with improved wettability on dentin surfaces (0.5% had the lowest contact angle) as well as appreciable hybrid layer quality, and higher resin penetration. Improvement of the adhesive bond strength was shown when adding RB at 1% concentration to universal adhesive (p < 0.05). Modified adhesive increased the resistance of collagen degradation by inhibiting MMP-2 and cathepsin-K. A higher RB concentration was associated with improved results (p < 0.01). D-ribose showed favorable negative binding to collagen. In conclusion, universal adhesive using 1% or 2% RB helped in maintaining dentin collagen scaffold and proved to be successful in improving wettability, protease inhibition, and stability of demineralized dentin substrates. A more favorable substrate is created which, in turn, leads to a more stable dentin-adhesive bond. This could lead to more advantageous outcomes in a clinical scenario where a stable bond may result in longevity of the dental restoration.