A Versatile Metal-Organic-Framework Pillared Interlayer Design for High-Capacity and Long-Life Lithium-Sulfur Batteries.

Developing high-performance lithium-sulfur batteries is a promising way to attain higher energy density at lower cost beyond the state-of-the-art lithium-ion battery technology. However, the major issues blocking their practical application are the sluggish kinetics and parasitic shuttling reactions for sulfur and polysulfides. Here, pillaring multilayer graphene with the metal-organic framework (MOF) demonstrates the substantial impact of a versatile interlayer design in tackling those issues. Unlike regular composite separators reported so far, the participation of tri-metallic Ni-Co-Mn MOF (NCM-MOF) as pillars supports the construction of an ion-channel interconnected interlayer structure, unexpectedly balancing the interfacial concentration polarization, spatially confining the soluble polysulfides and vastly affording lithiophilic sites for highly efficient polysulfide sieving/conversion. As a demonstration, we show that the MOF-pillared interlayer structure enables outstanding capacity (1634 mAh g-1 at 0.1C) and longevity (average capacity decay of 0.034% per cycle in 2000 cycles) of lithium-sulfur batteries. Besides, the multilayer separator can be readily integrated into the high-nickel cathode (LiNi0.91Mn0.03Co0.06O2)-based lithium-ion batteries, which efficiently suppresses the undesired phase evolution upon cycling. These findings suggest the potential of "gap-filling" materials in fabricating multi-functional separators, bring forward the pillared interlayer structure for energy-storage applications.

Wide-temperature-range pressure sensing by an aramid nanofibers/reduced graphene oxide flakes composite aerogel.

Aerogel-based conductive materials have emerged as a major candidate for piezoresistive pressure sensors due to their excellent mechanical and electrical performance besides light-weighted and low-cost characteristics, showing great potential for applications in electronic skins, biomedicine, robot controlling and intelligent recognition. However, it remains a grand challenge for these piezoresistive sensors to achieve a high sensitivity across a wide working temperature range. Herein, we report a highly flexible and ultra-light composite aerogel consisting of aramid nanofibers (ANFs) and reduced graphene oxide flakes (rGOFs) for application as a high-performance pressure sensing material in a wide temperature range. By controlling the orientations of pores in the composite framework, the aerogel promotes pressure transfer by aligning its conductive channels. As a result, the ANFs/rGOFs aerogel-based piezoresistive sensor exhibits a high sensitivity of up to 7.10 kPa-1, an excellent stability over 12,000 cycles, and an ultra-wide working temperature range from -196 to 200 °C. It is anticipated that the ANFs/rGOFs composite aerogel can be used as reliable sensing materials in extreme environments.

Efficient Solar Steam Generation by Multiscale Photothermal Structures Derived from Cactus Stems.

Solar steam generation (SSG) is a promising technique that may find applications in seawater desalination, sewage treatment, etc. The core component for SSG devices is photothermal materials, among which biomass-derived carbon materials have been extensively attempted due to their low cost, wide availability, and diversified microstructures. However, the practical performance of these materials is not satisfactory because of the multifaceted structural requirements for photothermal materials in SSG scenarios. In this work, cactus stems, which possess abundant and multiscaled pores for simultaneous sunlight gathering and water evaporation, are applied as the photothermal structure for SSG devices after mild heat treatment. Consequently, the SSG device based on the carbonized cactus stems delivers high performance (an absorption rate of 93.7% of the solar spectrum, an evaporation rate of 2.02 kg m-2 h-1, and an efficiency of 91.4% under one solar irradiation). We anticipate that the material can be a potential candidate for efficient SSG devices and may shed light on the sustainable supply of water.

Day-Night imaging without Infrared Cutfilter removal based on metal-gradient perovskite single crystal photodetector.

Day-Night imaging technology that obtains full-color and infrared images has great market demands for security monitoring and autonomous driving. The current mainstream solution relies on wide-spectrum silicon photodetectors combined with Infrared Cutfilter Removal, which increases complexity and failure rate. Here, we address these challenges by employing a perovskite photodetector based on Pb-Sn alloyed single crystal with a vertical bandgap-graded structure that presents variable-spectrum responses at different biases and extends the infrared detection range close to 1100 nm. Taking advantage of the Pb-Sn gradients in mobility and built-in field, the perovskite photodetector shows a large linear dynamic range of 177 dB. In addition, the optoelectronic characteristics feature long-term operational stability over a year. We further develop an imaging module prototype without Infrared Cutfilter Removal that exhibits excellent color fidelity with RGB color differences ranging from 0.48 to 2.46 under infrared interference and provides over 26-bit grayscale resolution in infrared imaging.

Surface topology of MXene flakes induces the selection of the sintering mechanism for supported Pt nanoparticles.

Sintering of metal nanocatalysts leading to particle growth and subsequent performance deactivation is a primary issue that hinders their practical applications. While metal-support interaction (MSI) is considered as the critical factor which influences the sintering behavior, the underlying microscopic mechanism and kinetics remain incompletely understood. Here, by using in situ scanning transmission electron microscopy (STEM) and theoretical analysis, we reveal the selection rule of the sintering mechanism for Pt nanoparticles on a two-dimensional (2D) MXene (Ti3C2T x ) support, which relies on the surface topology of MXene flakes. It is demonstrated that the sintering of Pt nanoparticles proceeds via Ostwald ripening (OR) in the surface defect (such as steps and pore edges) regions of MXene flakes due to strong MSI on the Pt/MXene interface; conversely, weak MSI between Pt nanoparticles and the planar surface of MXene leads to prevalent particle migration and coalescence (PMC) for sintering. Furthermore, our quantitative analysis shows a significant divergence in sintering rates for PMC and OR processes. These microscopic observations suggest a clear "sintering mechanism-MSI" relationship for Pt/MXene nanocatalysts and may shed light on the design of novel nanocatalysts.

Ultrathin Boundary-Less SnO2 Films with Surface-Activated Two-Dimensional Nanograins Enable Fast and Sensitive Hydrogen Gas Sensing.

Fast and reliable semiconductor hydrogen sensors are crucially important for the large-scale utilization of hydrogen energy. One major challenge that hinders their practical application is the elevated temperature required, arising from undesirable surface passivation and grain-boundary-dominated electron transportation in the conventional nanocrystalline sensing layers. To address this long-standing issue, in the present work, we report a class of highly reactive and boundary-less ultrathin SnO2 films, which are fabricated by the topochemical transformation of 2D SnO transferred from liquid Sn-Bi droplets. The ultrathin SnO2 films are purposely made to consist of well-crystallized quasi-2D nanograins with in-plane grain sizes going beyond 30 nm, whereby the hydroxyl adsorption and grain boundary side-effects are effectively suppressed, giving rise to an activated (101)-dominating dangling-bond surface and a surface-controlled electrical transportation with an exceptional electron mobility of 209 cm2 V-1 s-1. Our work provides a new cost-effective strategy to disruptively improve the gas reception and transduction of SnO2. The proposed chemiresistive sensors exhibit fast, sensitive, and selective hydrogen sensing performance at a much-reduced working temperature of 60 °C. The remarkable sensing performance as well as the simple and scalable fabrication process of the ultrathin SnO2 films render the thus-developed sensors attractive for long awaited practical applications in hydrogen-related industries.

Structural Engineering of Anode Materials for Low-Temperature Lithium-Ion Batteries: Mechanisms, Strategies, and Prospects.

The severe degradation of electrochemical performance for lithium-ion batteries (LIBs) at low temperatures poses a significant challenge to their practical applications. Consequently, extensive efforts have been contributed to explore novel anode materials with high electronic conductivity and rapid Li+ diffusion kinetics for achieving favorable low-temperature performance of LIBs. Herein, we try to review the recent reports on the synthesis and characterizations of low-temperature anode materials. First, we summarize the underlying mechanisms responsible for the performance degradation of anode materials at subzero temperatures. Second, detailed discussions concerning the key pathways (boosting electronic conductivity, enhancing Li+ diffusion kinetics, and inhibiting lithium dendrite) for improving the low-temperature performance of anode materials are presented. Third, several commonly used low-temperature anode materials are briefly introduced. Fourth, recent progress in the engineering of these low-temperature anode materials is summarized in terms of structural design, morphology control, surface & interface modifications, and multiphase materials. Finally, the challenges that remain to be solved in the field of low-temperature anode materials are discussed. This review was organized to offer valuable insights and guidance for next-generation LIBs with excellent low-temperature electrochemical performance.

Significant hydrogen generation via photo-mechanical coupling in flexible methylammonium lead iodide nanowires.

The flexoelectric effect, which refers to the mechanical-electric coupling between strain gradient and charge polarization, should be considered for use in charge production for catalytically driving chemical reactions. We have previously revealed that halide perovskites can generate orders of higher magnitude flexoelectricity under the illumination of light than in the dark. In this study, we report the catalytic hydrogen production by photo-mechanical coupling involving the photoflexoelectric effect of flexible methylammonium lead iodide (MAPbI3) nanowires (NWs) in hydrogen iodide solution. Upon concurrent light illumination and mechanical vibration, large strain gradients were introduced in flexible MAPbI3 NWs, which subsequently induced significant hydrogen generation (at a rate of 756.5 µmol g-1 h-1, surpassing those values from either photo- or piezocatalysis of MAPbI3 nanoparticles). This photo-mechanical coupling strategy of mechanocatalysis, which enables the simultaneous utilization of multiple energy sources, provides a potentially new mechanism in mechanochemistry for highly efficient hydrogen production.

Laser irradiation induced structural transformation in layered transition metal trichalcogenide nanoflakes.

Laser irradiation is a powerful tool in inducing changes in lattice structures and properties of two-dimensional (2D) materials through processes such as heating, bleaching, catalysis, etc. However, the underlying mechanisms of such transformations vary dramatically in different 2D materials. Here, we report the structural transformation of layered titanium trisulfide (TiS3) to titanium disulfide (TiS2) after irradiation. We systematically characterized the dependence of the transformation on laser power, flake thickness, irradiation time, and vacuum conditions using microscopic and spectroscopic methods. The underlying mechanism is confirmed as the heat-induced materials decomposition, a process that also occurs in many other transition metal trichalcogenide materials. Furthermore, we demonstrate that this spatial-resolved method also enables the creation of in-plane TiS3-TiS2 heterostructures. Our study identifies a new family of 2D materials that undergo a structural transformation after laser irradiation and enriches the methods available for developing new prototypes of low-dimensional devices in the future.

Dynamic Observations on Formation of Coffee-Ring Structures from the Degradation of Cesium Lead Halide Perovskite Nanocrystals.

Nanomaterials of halide perovskites have attracted increasing attention for their remarkable potential in optoelectronic devices, but their instability to environmental factors is the core issue impeding their applications. In this context, the microscopic understanding of their structural degradation mechanisms upon external stimuli remains incomplete. Herein, we took an emerging member of this material family, Cs4PbBr6 nanocrystals (NCs), as an example and investigated the degradation pathways as well as underlying mechanisms under an electron beam by using in situ transmission electron microscopy. Our atomic-scale study identified the distinct degradation stages for the NCs toward interesting coffee-ring PbBr2 structures, which are caused by the organic surface capping agents as well as surface energy of NCs. Our findings present a fundamental insight for the degradation of halide perovskite NCs and may provide indispensable guidance for their structural design and stability improvement.