Morpho-functional analysis of the temporomandibular joint following mandible-first bimaxillary surgery with mandible-only patient-specific implants.

The aim of this study was to evaluate condylar and glenoid fossa remodeling after bimaxillary orthognathic surgery guided by patient-specific mandibular implants. In total, 18 patients suffering from dentofacial dysmorphism underwent a virtually planned bimaxillary mandibular PSI-guided orthognathic procedure. One month prior to surgery, patients underwent a CBCT scan and optical scans of the dental arches; these datasets were re-acquired 1 month and at least 9 months postsurgery. Three-dimensional models of the condyles, glenoid fossae, and interarticular surface space (IASS) were obtained and compared to evaluate the roto-translational positional discrepancy and surface variation of each condyle and glenoid fossa, and the IASS variation. The condylar position varied by an average of 4.31° and 2.18 mm, mainly due to surgically unavoidable ramus position correction. Condylar resorption remodeling was minimal (average ≤ 0.1 mm), and affected skeletal class III patients the most. Later condylar remodeling was positively correlated with patient age. No significant glenoid fossa remodeling was observed. No postoperative orofacial pain was recorded at clinical follow-up. The procedure was accurate in minimizing the shift in relationship between the bony components of the TMJ and their remodeling, and was effective in avoiding postoperative onset of orofacial pain. An increase in sample size, however, would be useful to confirm our findings.

Indications for implant-supported rehabilitation of the posterior atrophic maxilla: A multidisciplinary consensus among experts in the field utilising the modified Delphi method.

PURPOSE: To establish consensus-driven guidelines that could support the clinical decision-making process for implant-supported rehabilitation of the posterior atrophic maxilla and ultimately improve long-term treatment outcomes and patient satisfaction. MATERIALS AND METHODS: A total of 33 participants were enrolled (18 active members of the Italian Academy of Osseointegration and 15 international experts). Based on the available evidence, the development group discussed and proposed an initial list of 20 statements, which were later evalu-ated by all participants. After the forms were completed, the responses were sent for blinded ana-lysis. In most cases, when a consensus was not reached, the statements were rephrased and sent to the participants for another round of evaluation. Three rounds were planned. RESULTS: After the first round of voting, participants came close to reaching a consensus on six statements, but no consensus was achieved for the other fourteen. Following this, nineteen statements were rephrased and sent to participants again for the second round of voting, after which a consensus was reached for six statements and almost reached for three statements, but no consensus was achieved for the other ten. All 13 statements upon which no consensus was reached were rephrased and included in the third round. After this round, a consensus was achieved for an additional nine statements and almost achieved for three statements, but no consensus was reached for the remaining statement. CONCLUSION: This Delphi consensus highlights the importance of accurate preoperative planning, taking into consideration the maxillomandibular relationship to meet the functional and aesthetic requirements of the final restoration. Emphasis is placed on the role played by the sinus bony walls and floor in providing essential elements for bone formation, and on evaluation of bucco-palatal sinus width for choosing between lateral and transcrestal sinus floor elevation. Tilted and trans-sinus implants are considered viable options, whereas caution is advised when placing pterygoid implants. Zygomatic implants are seen as a potential option in specific cases, such as for completely edentulous elderly or oncological patients, for whom conventional alternatives are unsuitable.

A new impression reference technique to simplify the digital workflow for immediate loading zygomatic implant-supported rehabilitation.

Zygomatic implant-supported rehabilitation has grown in popularity for use in clinical practice. Although many studies have been carried out into the surgical procedure, the prosthetic workflow is not clearly defined and standard techniques are not readily applied; thus, a digital approach may ultimately streamline the procedure. In the present study, the authors examined a digital workflow for immediately loaded prostheses supported by zygomatic implants. The novel technique proposed by the present authors, involving use of an impression reference, achieved promising results in terms of accuracy and procedural simplification.

Semi-occlusive CAD/CAM titanium mesh for guided bone regeneration: Preliminary clinical and histological results.

PURPOSE: Guided bone regeneration is a widely used technique for the treatment of atrophic arches. A broad range of devices have been employed to achieve bone regeneration. The present study aimed to investigate the clinical and histological findings for a new titanium CAD/CAM device for guided bone regeneration, namely semi-occlusive titanium mesh. MATERIALS AND METHODS: Nine partially edentulous patients with vertical and/or horizontal bone defects underwent a guided bone regeneration procedure to enable implant placement. The device used as a barrier was a semi-occlusive CAD/CAM titanium mesh with a laser sintered microperforated scaffold with a pore size of 0.3 mm, grafted with autogenous and xenogeneic bone in a ratio of 80:20. Eight months after guided bone regeneration, surgical and healing complications were evaluated and histological analyses of the regenerated bone were performed. RESULTS: A total of 9 patients with 11 treated sites were enrolled. Two healing complications were recorded: one late exposure of the device and one early infection (18.18%). At 8 months, well-structured new regenerated trabecular bone with marrow spaces was mostly present. The percentage of newly formed bone was 30.37% ± 4.64%, that of marrow spaces was 56.43% ± 4.62%, that of residual xenogeneic material was 12.16% ± 0.49% and that of residual autogenous bone chips was 1.02% ± 0.14%. CONCLUSION: Within the limitations of the present study, the results show that semi-occlusive titanium mesh could be used for vertical and horizontal ridge augmentation. Nevertheless, further follow-ups and clinical and histological studies are required.

Hygienic maintenance in patients with maxillae atrophy and in oncological patients with maxillary resection rehabilitated with zygomatic implants: A nested monocentric prospective cohort study.

OBJECTIVE: To assess peri-implant soft tissues condition, comparing clinical parameters of implants placed in patients with atrophic upper jaws and patients who underwent maxillary resection for oncological reasons. BACKGROUND: Zygomatic implants (ZIs) in oncologic patients could be affected by more complications compared to implants placed in atrophic maxillae. The soft tissue condition is an essential requirement for implant success, but few studies have investigated this topic. METHODS: A nested monocentric prospective parallel cohort (atrophic vs. oncological patients) study was performed. Clinical visits and professional hygiene sessions were performed every three months, and bleeding on probing (BOP), probing pocket depth (PPD), gingival index (GI), plaque index (PI) and implant mobility were recorded by a blind outcome assessor. RESULTS: In total, 77 ZIs placed in 21 patients were evaluated: 54 (70.1%) ZIs were inserted in patients belonging to the atrophic cohort (PAM) and 23 (29.9%) ZIs in the oncologic cohort (OP). The probability of having BOP at the considered mean follow-up (27 months) was 24.8% (95% CI 19.0-31.9) for PAM and 22.9% (95% CI 15.1-33.9) OP. The mean PPD values were 2.78 ± 1.28 (range 1-8) in PAM and 2.91 ± 1.98 (range 0-10) in OP. None of the implants showed mobility. No associations between group belongingness and the entity of PPD, PI, GI and the risk of BOP were found, adjusting for the considered confounding factors (age, smoking and implant position). CONCLUSIONS: Under a strict supportive hygiene therapy protocol ZIs in oncologic patients showed similar peri-implant tissue conditions to that of patients with maxillary atrophy.

Photodynamic Therapy with Aminolevulinic Acid Enhances the Cellular Activity of Cells Cultured on Porcine Acellular Dermal Matrix Membranes Used in Periodontology.

This study aims to test a photodynamic protocol based on a gel containing aminolevulinic acid followed by red-LED (ALAD-PDT) irradiation on human gingival fibroblasts (hGFs) and osteoblasts (hOBs) cultured on a porcine acellular dermal matrix membrane (PADMM). In the previous literature, ALAD-PDT showed solid antibacterial activity and proliferative induction on HGFs cultured on plates and HOBs cultured on a cortical lamina. PADMMs are used in dentistry and periodontology to treat gingival recessions and to increase the tissue thickness in the case of a thin biotype without the risks or postoperative discomfort associated with connective tissue grafts. However, one of the possible complications in this type of surgery is represented by bacterial invasion and membrane exposition during the healing period. We hypothesized that the addition of ALAD-PDT to PADMMs could enhance more rapid healing and decrease the risks connected with bacterial invasion. In periodontal surgery, PADMMs are inserted after a full-thickness flap elevation between the bone and the flap. Consequently, all procedures were performed in parallel on hOBs and hGFs obtained by dental patients. The group control (CTRL) was represented by the unexposed cells cultured on the membranes, group LED (PDT) were the cells subjected to 7 min of red LED irradiation, and ALAD-PDT were the cells subjected to 45 min of ALAD incubation and then to 7 min of red LED irradiation. After treatments, all groups were analyzed for MTT assay and subjected to histological examination at 3 and 7 days and to the SEM observations at 3, 7, and 14 days. Different bone mineralization assays were performed to quantify the effects of ALAD-PDT on hOBs: ALP activity, ALP gene expression, osteocalcin, and alizarin red. The effects of ALAD-PDT on hGFs were evaluated by quantifying collagen 1, fibronectin, and MMP-8. Results showed that ALAD-PDT promoted cellular induction, forming a dense cellular network on hOBs and hGFs, and the assays performed showed statistically significantly higher values for ALAD-PDT with respect to LED alone and CTRLs. In conclusion, ALAD-PDT could represent a promising aid for enhancing the healing of gingival tissues after PADMM applications.

What is the Incidence of Late Complications Associated With Lower Third Molar Coronectomy? 10-Year Follow-Up Results.

PURPOSE: Coronectomy is an operation to manage impacted third molars (M3s) considered at high risk for mandibular nerve injury but long-term outcomes are still lacking. The purpose of this study was to estimate the risk of late complications occurring within 10 years following lower M3 coronectomy. METHODS: The investigators designed a prospective cohort study and enrolled a sample of 94 patients treated with coronectomy of third mandibular molars at the Unit of Oral and Maxillofacial Surgery of the University of Bologna, from 2009 to 2012. This follow-up study included all of the patients from the original study who completed 10 years of follow-up. The primary outcome variables is postoperative late complication occurring between 5 and 10 years after coronectomy coded as present or absent. Late complications were defined as root exposure, nerve injury, pulpitis, periapical infection, and reoperation. The secondary outcome variable was probing pocket depth. Covariates examined were age, smoking and type of M3 impaction. Descriptive statistical analyses were performed. RESULTS: The inception cohort was composed of 94 subjects who had 116 coronectomies (k) completed. The study cohort was composed of subjects with 10 years of follow-up and included 48 subjects (k = 60) with a mean age of 28.99 ± 8.9 years. Between years 5 and 10 of follow-up, 2 subjects (4%) have complications; all root exposures diagnosed at years 8 or 9 after surgery. In another case root removal was required for orthodontics reason. No case of nerve injury to the inferior alveolar nerve occurred, and no periapical infection was observed around the residual roots. The mean 10-year probing pocket depth was 3.31 ± 0.92 mm (1,66-5,66 mm). There were too few complications to identify risk factors for late complications. CONCLUSIONS: Within all the limitations of this study, the results of this prospective study imply that coronectomy is a useful surgical technique for the treatment of M3s at high neurological risk, to avoid nerve injury to the inferior alveolar nerve. In addition, after coronectomy, retained roots did not develop late infection or periapical infection in the long term. However, in a few cases, removal of retained roots was required at 10 years, due to root migration in the oral cavity. The risk for late complications is uncommon, but persistent.

Influence of Keratinized Tissue on Short Dental Implants: A Parallel Cohort Retrospective Study on 217 Implants with a Mean Follow-up of 4.1 Years.

PURPOSE: To assess whether the presence or absence of keratinized tissue height (KTh) may have an influence on marginal bone levels, complications, and implant survival for short implants. MATERIALS AND METHODS: The study was designed as parallel cohort retrospective research. Short implants with an implant length < 7 mm were considered. One cohort was composed of patients with short implants surrounded by ≥ 2 mm of KTh (adequate KTh); the other cohort included implants with < 2 mm of KTh (not-adequate KTh). Outcome measures were marginal bone level (MBL) changes, failures, and complications. RESULTS: One hundred ten patients treated with 217 short and extrashort implants (4 to 6.6 mm long) were retrospectively included. The mean follow-up was 4.1 years after prosthetic loading (range: 1 to 8 years). The differences between KTh groups in MBL were not statistically significant at every follow-up considered: 0.05 mm at 1 year (P = .48), 0.06 mm at 3 years (P = .34), 0.04 mm at 5 years (P = .64), and 0.03 at 8 years (P = .82). A total of nine complications were reported: three in the not-adequate KTh group and six in the adequate group; the difference was not statistically significant (OR: 3.03, 95% CI: 0.68 to 13.46, P = .14). Five implants failed due to peri-implantitis, two in the not-adequate KTh group and three in the adequate group, without a statistically significant difference (OR: 2.76, 95% CI: 0.42-17.99, P = .29). CONCLUSION: This study showed no statistically significant differences in MBL, complications, and implant failure rates between short implants with adequate or not-adequate KThs. However, given the importance of patient comfort while brushing and plaque accumulation, keratinized tissue grafts could be important in selected patients, especially for those who are severely atrophic, also taking into consideration all the limitations of this study and the mediumterm follow-up. Nevertheless, longer follow-ups, larger numbers of patients, and randomized controlled clinical trials are needed before making more reliable clinical recommendations. Int J Oral Maxillofac Implants 2023;38:462-467. doi: 10.11607/jomi.9918.

The Curved Presplitting Technique in a Totally Edentulous Atrophic Mandible: A Surgical Case Report.

The management of horizontally fully edentulous atrophic ridges is a common problem in dental implantology. This case report describes an alternative modified two-stage presplitting technique. The patient was referred for an implant-supported rehabilitation of their edentulous mandible. CBCT scans showed a mean available bone width of about 3 mm. At the first stage, four linear corticotomies were performed using a piezoelectric surgical device. At the second surgical stage 4 weeks later, bone expansion was performed, and four implants were placed in the interforaminal area. The healing process was uneventful. No fractures of the buccal wall and no neurologic lesions were observed. Postoperative CBCT scans showed a mean bone width gain of about 3.7 mm. Implants were uncovered 6 months after the second surgery, and 1 month later, a fixed provisional screw-retained prosthesis was delivered. This approach could be used as a reconstructive technique that avoids using grafts and reduces treatment times, possible complications, postsurgical morbidity, and costs by exploiting the patient's native bone as much as possible. Considering the limitations of a case report, randomized controlled clinical trials are needed to confirm the results and validate this technique.

Extra-short (4-mm) implants placed after regenerative failures in the posterior atrophic mandible: A retrospective study.

PURPOSE: To explore whether extra-short (4-mm) implants could be used to rehabilitate sites where regenerative procedures had failed in order to avoid additional bone grafting. MATERIALS AND METHODS: A retrospective study was conducted among patients who had received extra-short implants after failed regenerative procedures in the posterior atrophic mandible. The research outcomes were complications, implant failure and peri-implant marginal bone loss. RESULTS: The study population was composed of 35 patients with 103 extra-short implants placed after the failure of different reconstructive approaches. The mean follow-up duration was 41.3 ± 21.4 months post-loading. Two implants failed, leading to a failure rate of 1.94% (95% confidence interval 0.24%-6.84%) and an implant survival rate of 98.06%. The mean amount of marginal bone loss at 5 years post-loading was 0.32 ± 0.32 mm. It was significantly lower in extra-short implants placed in regenerative sites that had previously received a loaded long implant (P = 0.004). Failure of guided bone regeneration before placement of short implants tended to lead to the highest annual rate of marginal bone loss (P = 0.089). The overall rate of biological and prosthetic complications was 6.79% (95% confidence interval 1.94%-11.70%) and 3.88% (95% confidence interval 1.07%-9.65%), respectively. The success rate was 86.4% (95% confidence interval 65.10%-97.10%) after 5 years of loading. CONCLUSIONS: Within the limitations of this study, extra-short implants seem to be a good clinical option to manage reconstructive surgical failures, reducing surgical invasiveness and rehabilitation time.

Osteoblasts and Fibroblasts Interaction with a Porcine Acellular Dermal Matrix Membrane.

The use of collagen membranes has remained the gold standard in GTR/GBR. In this study, the features and the biological activities of an acellular porcine dermis collagen matrix membrane applicable during dental surgery were investigated, and also by applying hydration with NaCl. Thus, two tested membranes were distinguished, the H-Membrane and Membrane, compared to the control cell culture plastic. The characterization was performed by SEM and histological analyses. In contrast, the biocompatibility was investigated on HGF and HOB cells at 3, 7, and 14 days by MTT for proliferation study; by SEM and histology for cell interaction study; and by RT-PCR for function-related genes study. In HOBs seeded on membranes, mineralization functions by ALP assay and Alizarin Red staining were also investigated. Results indicated that the tested membranes, especially when hydrated, can promote the proliferation and attachment of cells at each time. Furthermore, membranes significantly increased ALP and mineralization activities in HOBs as well as the osteoblastic-related genes ALP and OCN. Similarly, membranes significantly increased ECM-related and MMP8 gene expression in HGFs. In conclusion, the tested acellular porcine dermis collagen matrix membrane, mainly when it is hydrated, behaved as a suitable microenvironment for oral cells.

Three-dimensional cephalometric outcome predictability of virtual orthodontic-surgical planning in surgery-first approach.

OBJECTIVES: The aim of this study is to introduce a novel 3D cephalometric analysis (3DCA) and to validate its use in evaluating the reproducibility of virtual orthodontic-surgical planning (VOSP) in surgery-first approach (SF) comparing VOSP and post-operative outcome (PostOp). METHODS: The cohort of nineteen patients underwent bimaxillary orthognathic surgery following the VOSP designed in SimPlant O&O software by processing cone-beam computed tomography (CBCT) scans and intraoral digital scanning of the dental arches. Said records were re-acquired once the post-operative orthodontic treatment was completed. The 3DCA was performed by three expert operators on VOSP and PostOp 3D models. Descriptive statistics of 3DCA measures were evaluated, and outcomes were compared via Wilcoxon test. RESULTS: In the comparison between cephalometric outcomes against planned ones, the following values showed significant differences: Wits Index, which suggests a tendency towards skeletal class III in PostOp (p = 0.033); decreased PFH/AFH ratio (p = 0.010); decreased upper incisors inclination (p < 0.001); and increased OVJ (p = 0.001). However not significant (p = 0.053), a tendency towards maxillary retroposition was found in PostOp (A/McNamara VOSP: 5.05 ± 2.64 mm; PostOp: 4.1 ± 2.6 mm). On average, however, when McNamara's plane was considered as reference, a tendency to biprotrusion was found. Upper incisal protrusion was greater in PostOp as an orthodontic compensation for residual maxillary retrusion (VOSP: 5.68 ± 2.56 mm; PostOp: 6.53 ± 2.63 mm; p = 0.084). Finally, the frontal symmetry in relation to the median sagittal plane decreased in craniocaudal direction. LIMITATIONS: A potential limit of studies making use of closest point distance analysis is represented by the complexity that surgeons and orthodontists face in applying this three-dimensional evaluation of SF accuracy/predictability to everyday clinical practice and diagnosis. Also, heterogeneity and limited sample size may impact the results of the study comparison. CONCLUSIONS: The presented 3DCA offers a valid aid in performing VOSP and analysing orthognathic surgery outcomes, especially in SF. Thanks to the cephalometric analysis, we found that surgery-first approach outcome unpredictability is mainly tied to the sagittal positioning of the maxilla and that the transverse symmetry is progressively less predictable in a craniocaudal direction.

Simultaneous GBR and Implant Placement with Resorbable Membranes in the Rehabilitation of Partially Edentulous and Horizontally Atrophic Dental Arches: A Retrospective Study on 97 Implants with a 3- to 7-Year Follow-up.

This retrospective study evaluates the clinical and radiographic outcomes of simultaneous guided bone regeneration (GBR) and implant placement procedures in the rehabilitation of partially edentulous and horizontally atrophic dental arches using resorbable membranes. A total of 49 patients were included, and 97 implants were placed. Patients were followed up for 3 to 7 years after loading. The data indicate that GBR with simultaneous implant placement and resorbable membranes can be a good clinical choice, and the data suggest that it could be better to horizontally reconstruct no more than 3 mm of bone in order to reduce the number of complications and to obtain stable results. However, this technique remains difficult and requires expert surgeons.

Guided bone regeneration using titanium mesh to augment 3-dimensional alveolar defects prior to implant placement. A pilot study.

OBJECTIVES: To evaluate the outcomes of bone regeneration using a customized titanium mesh scaffold to cover a bone graft for reconstruction of complex defects of the jaws. MATERIALS AND METHODS: 19 large defects were digitally reconstructed using CT scans according to the prosthetic requirements. A titanium mesh scaffold was designed to cover the bone (autologous/bovine bone particulate) graft. At least 6 months after surgery, a new cone-beam CT was taken. The pre- and postoperative CT datasets were then converted into three-dimensional models and digitally aligned. The actual mesh position was compared to the virtual position to assess the reliability of the digital project. The reconstructed bone volumes (RBVs) were calculated according to the planned bone volumes (PBVs), outlining the areas under the mesh. These values were then correlated with the number of exposures, locations of atrophy, and virtually planned bone volume. RESULTS: The mean matching value between the planned position of the mesh and the actual one was 82 ± 13.4%. 52.3% (40% early and 60% late) exposures were observed, with 15.8% exhibiting infection. 26.3% resulted as failures. The amount of reconstructed bone volume (RBV) in respect to PBV was 65 ± 40.5%, including failures, and 88.2 ± 8.32% without considering the failures. The results of the exposure event were statistically significant (p = .006) in conditioning the bone volume regenerated. CONCLUSIONS: This study obtained up to 88% of bone regeneration in 74% of the cases. The failures encountered (26%) should underline the operator's expertise relevance in conditioning the final result.

A 5-year randomized controlled clinical trial comparing 4-mm ultrashort to longer implants placed in regenerated bone in the posterior atrophic jaw.

BACKGROUND: Short implants (up to 5-mm long) have shown good results when compared to longer implants placed in augmented bone. PURPOSE: To evaluate if 4-mm ultrashort implants could also be an alternative to bone augmentation in the severely atrophic posterior jaws. The primary aim of the study was to compare implant survival rates between study groups. MATERIALS AND METHODS: Eighty partially edentulous patients with posterior atrophic jaws (5-6 mm of bone above the mandibular canal and 4-5 mm below the maxillary sinus) were included: 40 patients in the maxilla and 40 in mandible. The patients were randomized to receive one to three 4-mm ultrashort implants or one to three implants at least 10-mm long in augmented bone. Results are reported 5 years after loading with the following outcome measures: implant and prosthetic failures, complications and peri-implant marginal bone level changes. RESULTS: Thirty-two complications were reported for the control group in 18 patients versus 13 complications in 10 patients in the test group, the difference being not statistically significant (p = 0.103). In the augmented group, 12 implants failed in 6 patients versus 7 short implants in 6 cases, and 9 prostheses failed in the control group while 4 in the test one, without statistically significant differences (p = 1.000 and 0.363, respectively). At 5 years after loading, short implants lost on average 0.58 ± 0.40 mm of peri-implant marginal bone and long implants 0.99 ± 0.58 mm, the difference was statistically significant (p = 0.006). CONCLUSION: Four-millimeter ultrashort implants showed similar if not better results when compared to longer implants placed in augmented jaws 5 years after loading. For this reason, their use could be in specific cases preferable to bone augmentation since the treatment is less invasive, faster, cheaper and associated with less morbidity. However, longer follow-ups and larger trials are needed.

Prognosis of Deantigenated Equine Bone Used for Bone Augmentation: A Multicenter Retrospective Study on Early and Late Postsurgical Complications in 81 Consecutive Patients.

PURPOSE: To evaluate the clinical outcome of deantigenated equine bone (DEB) grafts in a series of patients treated with DEB at six months postaugmentation. MATERIALS AND METHODS: One hundred DEB grafts were inserted in 81 patients between January 2004 and December 2006. Thirty-two DEBs were blocks and 68 were granules (52 sinus lift and 16 guided bone regeneration [GBR] procedures performed). A total of 147 implants were inserted. A Pearson chi-square test was used to detect any statistically significant correlation between the studied variables and early and/or late failures. RESULTS: There were 6 early and 26 late graft failures and another 16 failures after prosthesis placement. The overall failure rate was 25% in the GBR procedures, 31.9% in sinus lift, and 54.3% with blocks, for a total complication rate of 39.5%. A statistically significant relation was detected with respect to graft type and early complications (p = .005), with a worse outcome for DEB blocks compared to granules. After provisional prosthesis restoration, 23 implants were lost, and another 41 failed after definitive prosthesis delivery, for an overall failure rate of 43.5%. The follow-up period was 3 years after surgery. CONCLUSIONS: DEB grafting material had a very high rate of complications. Blocks had more than 50% failures, mainly in the immediate postoperative period. Other procedures such as GBR and sinus lift also showed more than 25% infections and resorption, and late failures (i.e., after-implant placement) were also common. Our results show that DEB is less than ideal for crestal bone reconstruction.

Posterior jaws rehabilitation with < 7mm-short implants. A review.

INTRODUCTION: The results with shorter and shorter implants have been revolutionizing the implantology scenario and are worthy of being well-analyzed and understood. This review aims to add further knowledge about the last 10-years observation period on < 7mm-short implants in the posterior atrophic jaws, better defining the indication of their use. METHODS: From a Medline database research, systematic reviews, controlled and no- controlled trials (CT, n-CT) with ≥ 3years-follow-ups on <7 mm / ≥ 5mm-short implants (group A), and clinical studies with ≥ 1year-follow-up on 4mm-short implants (group B) were considered. The outcomes, in terms of implant survival rate (SR), marginal bone loss (MBL), and complications were analyzed according to the duration of follow-ups, implant site (maxilla and mandible), type of prosthesis (single crown or splinted units), vertically impaired or normal sites. RESULTS: Thirty-four trials (28 for group A and six for group B) were selected. Group A: a mean follow up of 5,8 (3-10) years came out; pre-and post-loading SR range was 94.4- 100% and 89.6-100%, respectively; the range of MBL was 0.12-1.49; 50% of CT found less statistically significant surgical complications in comparison with standard implants (ST) in reconstructed sites, while major prosthetic problems were recorded with short -implants (SH) in 37.5% of CT; in no atrophied sites, a mean SR range of 86.7-100 % vs. 88-100 % and a total bone loss of 2 vs.1.6 for SH vs.ST emerged. Group B: the overall mean follow-up period was 2,3 years, and the pre-and post- SR ranges were 93-100 % and 87.5-100 %, respectively. The MBL range was 0.02- 0.63 mm. All RCT reported significantly fewer surgical complications with SH than with ST in reconstructed mandibles within one year. No prosthetic complications were reported for up to 5 years using no pontics or cantilevers fixed bridges. CONCLUSIONS: Similar or even better results for SH than ST in terms of post-loading SR and MBL came out for < 7mm/ ≥ 5mm-short implants in atrophic bone regardless of the prosthetic solutions, with less surgical complications but a few more prosthetic problems; the good results up to 5 years for 4mm-short implants in mandibles are associated with splinted and no-risk prosthetic solutions.

An Ancient Science to Improve Today's Clinical Practice: Oral Surgery Meets Human Anatomy.

Human body dissection was a ubiquitous practice in the past, to better understand anatomy and to develop medicine. Today, its role could still be important to answer everyday clinical queries and help surgeons. The example of the possible lack of anesthesia during symphysis surgeries can emphasize the usefulness of dissection. The mandibular symphysis usually receives innervation from inferior alveolar nerve terminations, but, in some rare cases, a particular anastomosis involves the lingual nerve and the nerve to the mylohyoid. The anatomical knowledge resulting from body dissections could help oral surgeons to understand the reason why the patient could feel pain during the surgery, and ensure performance of the right lingual nerve block to obtain complete anesthesia. This clinical situation shows the educational role of an ancient, yet still valid, practice, human dissection, and the importance of anatomical studies to improve surgical skills, to provide better treatment for the patient.

Influence of Different Implant Types on Bone Levels After Healing and Peri-implant Tissue Reactions Following Peri-implantitis: A Preclinical Study.

This study evaluated the influence of different implant types on (1) radiographic marginal bone levels after healing and (2) radiographic and histomorphometric tissue levels and characteristics following ligature-induced peri-implantitis. Four implant types (Standard Plus, Straumann [S]; NobelReplace Tapered, Nobel Biocare [N]; In-Kone Universal, Global D [I]; and twinKon, Global D [T]) were randomly placed in the edentulous healed mandibular ridge of six dogs (T0), for a total of 57 implants placed. After 10 weeks, a peri-implantitis was ligature-induced (T1). After 12 weeks, biopsy samples were processed for histomorphometric analysis (T2). Standardized radiographs were taken at T0, T1, and T2 for imaging analysis. Statistical analysis was performed using mixed-effects linear modeling. After healing (T1), the radiographic marginal bone level was more coronal for implants I, T, and S compared to N. Following peri-implantitis (T2), the histologic marginal bone level was more coronal for implants I, T, and S compared to N, and for implants I and T compared to S. Also at T2, the radiographic marginal bone level was more coronal at implants I, T, and S compared to N. Implant type may influence bone remodeling during healing and bone loss during the early stages of experimental peri-implantitis.

Super-short (4-mm) Postextractive, Immediately Provisionalized Implant in a Minimally Invasive Rehabilitation Approach Avoiding Extraction of the Impacted Maxillary Canine: A 2-Year Follow-up Case Report.

This case report describes an alternative minimally invasive fixed rehabilitation to approach an impacted maxillary canine (IMC) and the residual deciduous teeth. The patient refused any orthodontic treatment or surgical extraction of the IMC, asking for a fixed and fast option. Considering the available bone was about 5 mm in height, an immediately provisionalized postextractive 4-mm super-short implant was placed. Healing was uneventful. Two years after loading, the result was stable and the patient was fully satisfied. Within all the limitations of this case report, this approach could reduce rehabilitative times, possible complications, and costs.