Critical Sensing Modalities for Hydrogen: Technical Needs and Status of the Field to Support a Changing Energy Landscape.

Decarbonization of the energy system is a key aspect of the energy transition. Energy storage in the form of chemical bonds has long been viewed as an optimal scheme for energy conversion. With advances in systems engineering, hydrogen has the potential to become a low cost, low emission, energy carrier. However, hydrogen is difficult to contain, it exhibits a low flammability limit (>40000 ppm or 4%), low ignition energy (0.02 mJ), and it is a short-lived climate forcer. Beyond commercially available sensors to ensure safety through spot checks in enclosed environments, new sensors are necessary to support the development of low emission infrastructure for production, transmission, storage, and end use. Efficient scalable broad area hydrogen monitoring motivates lowering the detection limit below that (10 ppm) of best in class commercial technologies. In this perspective, we evaluate recent advances in hydrogen gas sensing to highlight technologies that may find broad utility in the hydrogen sector. It is clear in the near term that a sensor technology suite is required to meet the variable constraints (e.g., power, size/weight, connectivity, cost) that characterize the breadth of the application space, ranging from industrial complexes to remote pipelines. This perspective is not intended to be another standard hydrogen sensor review, but rather provide a critical evaluation of technologies with detection limits preferably below 1 ppm and low power requirements. Given projections for rapid market growth, promising techniques will also be amenable to rapid development in technical readiness for commercial deployment. As such, methods that do not meet these requirements will not be considered in depth.

Continuous flow synthesis of pyridinium salts accelerated by multi-objective Bayesian optimization with active learning.

We report a human-in-the-loop implementation of the multi-objective experimental design via a Bayesian optimization platform (EDBO+) towards the optimization of butylpyridinium bromide synthesis under continuous flow conditions. The algorithm simultaneously optimized reaction yield and production rate (or space-time yield) and generated a well defined Pareto front. The versatility of EDBO+ was demonstrated by expanding the reaction space mid-campaign by increasing the upper temperature limit. Incorporation of continuous flow techniques enabled improved control over reaction parameters compared to common batch chemistry processes, while providing a route towards future automated syntheses and improved scalability. To that end, we applied the open-source Python module, nmrglue, for semi-automated nuclear magnetic resonance (NMR) spectroscopy analysis, and compared the acquired outputs against those obtained through manual processing methods from spectra collected on both low-field (60 MHz) and high-field (400 MHz) NMR spectrometers. The EDBO+ based model was retrained with these four different datasets and the resulting Pareto front predictions provided insight into the effect of data analysis on model predictions. Finally, quaternization of poly(4-vinylpyridine) with bromobutane illustrated the extension of continuous flow chemistry to synthesize functional materials.

Interaction of N-nitrosamines with binuclear copper complexes for luminescent detection.

Cu(I) from tetrakis(acetonitrile)copper(I) hexafluorophosphate ([Cu(MeCN)4]PF6) was complexed with five structurally related phosphines containing N-heterocycles. The interactions between the resulting complexes and some N-nitrosamines were studied using X-ray crystallography as well as emission spectroscopy. Upon complexation, three phosphine ligands bridge two Cu(I) centers to give paddlewheel type structures that displayed a range of emission wavelengths spanning the visible region. N-Nitrosodimethylamine (NDMA) was shown to coordinate to one of the two copper centers in some of the paddlewheel complexes in the solid state and this interaction also quenches their emissions in solution. The influence of the weakly coordinating anion on crystal and spectroscopic properties of one of the paddlewheel complexes was also examined using tetrakis(acetonitrile)copper(I) perchlorate ([Cu(MeCN)4]ClO4) as an alternative Cu(I) source. Similarly, copper(II) perchlorate hexahydrate (Cu(ClO4)2·6H2O) was used for complexation to observe the impact of metal oxidation state on the two aforementioned properties. Lastly, the spectroscopic properties of the complex between Ph2P(1-Isoquinoline) and Cu(I) was shown to exhibit solvent dependence when the counterion is ClO4-. These Cu(I) complexes are bench stable solids and may be useful materials for developing a fluorescence based detection method for N-nitrosamines.

Microwave-assisted synthesis of octahedral Rh nanocrystals and their performance for electrocatalytic oxidation of formic acid.

Uniform and well-defined octahedral Rh nanocrystals were rapidly synthesized in a domestic microwave oven for only 140 s of irradiation by reducing Rh(acac)3 with tetraethylene glycol (TEG) as both a solvent and a reducing agent in the presence of an appropriate amount of KI, didecyl dimethyl ammonium chloride (DDAC), ethylene diamine (EDA) and polyvinylpyrrolidone (PVP). KI, DDAC and EDA were essential for the creation of octahedral Rh nanocrystals. Electrochemical measurements showed a significantly enhanced electrocatalytic activity and stability for the as-prepared octahedral Rh nanocrystals compared with commercial Rh black.

Chemiresistive Hydrogen Sensing with Size-Limited Palladium Nanoparticles in Iptycene-Containing Poly(arylene ether)s.

Metal nanoparticles have been widely employed in chemical sensing due to their high reactivity toward various gases. The size of the metal nanoparticles often dictates their reactivity and hence their performance as chemiresistive sensors. Herein, we report that iptycene-containing poly(arylene ether)s (PAEs) have been shown to limit the growth of palladium nanoparticles (Pd NPs) and stabilize the Pd NPs dispersion. These porous PAEs also facilitate the efficient transport of analytes. Single-walled carbon nanotube (SWCNT)-based chemiresistors and graphene field-effect transistors (GFETs) using these PAE-supported small Pd NPs are sensitive, selective, and robust sensory materials for hydrogen gas under ambient conditions. Generalizable strategies including presorting SWCNTs with pentiptycene-containing poly(p-phenylene ethynylene)s (PPEs) and thermal annealing demonstrated significant improvements in the chemiresistive performance. The polymer:NP colloids produced in this study are readily synthesized and solution processable, and these methods are of general utility.

Cyclodextrin-Functionalized Polypyrrole Particles for the Extraction of Aromatics from Water.

We describe the preparation of oil-in-water (o/w) colloidal particles with a polypyrrole (pPy) shell in which cyclodextrin has been incorporated at the oil-water interface via either physical adsorption or reaction with the pPy shell. The utility of these particles was assessed by the extraction of organic dyes from water. In all cases, we found that cyclodextrin incorporation significantly improved dye uptake, giving up to 78 ± 11% dye extraction in the case of a 100 ppm solution of 4-nitroaniline with a covalently incorporated cyclodextrin. We demonstrated the ability of our colloidal particles to extract nicotine-derived nitrosamine ketone (NNK), a potent carcinogen, from aqueous solution. By treating the solution containing 100 ppm NNK with our particles over 24 and 48 h, we found that NNK removal reached 65 ± 2 and 83 ± 1%, respectively. The uptake could be improved by re-treating a solution with additional freshly prepared particles, to achieve 95 ± 1% NNK extraction with a covalently incorporated cyclodextrin.

Porous Polymers Containing Metallocalix[4]arene for the Extraction of Tobacco-Specific Nitrosamines.

We designed porous polymers with a tungsten-calix[4]arene imido complex as the nitrosamine receptor for the efficient extraction of tobacco-specific nitrosamines (TSNAs) from water. The interaction between the metallocalix[4]arene and the TSNA, 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (nicotine-derived nitrosamine ketone, NNK) was investigated. We found that the incorporation of the nitrosamine receptor into porous polymers increased their selectivity toward NNK over nicotine. The polymer with an optimal ratio of calixarene-containing and porosity-inducing building blocks showed a high maximum adsorption capacity of up to 203 mg/g toward NNK under sonication, which was among the highest values reported. The adsorbed NNK could be removed from the polymer by soaking it in acetonitrile, enabling the adsorbent to be reused. A similar extraction efficiency to that under sonication could be achieved using the polymer-coated magnetic particles under stirring. We also proved that the material could efficiently extract TSNAs from real tobacco extract. This work not only provides an efficient material for the extraction of TSNAs but also offers a design strategy for efficient adsorbents.