ABSTRACT
The development of ultra-thin flat liquid sheets capable of running in vacuum has provided an exciting new target for X-ray absorption spectroscopy in the liquid and solution phases. Several methods have become available for delivering in-vacuum sheet jets using different nozzle designs. We compare the sheets produced by two different types of nozzle; a commercially available borosillicate glass chip using microfluidic channels to deliver colliding jets, and an in-house fabricated fan spray nozzle which compresses the liquid on an axis out of a slit to achieve collision conditions. We find in our tests that both nozzles are suitable for use in X-ray absorption spectroscopy with the fan spray nozzle producing thicker but more stable jets than the commercial nozzle. We also provide practical details of how to run these nozzles in vacuum.
ABSTRACT
We experimentally study the interaction between intense infrared few-cycle laser pulses and an ultrathin (â¼2 µm) flat liquid sheet of isopropanol running in vacuum. We observe a rapid decline in transmission above a critical peak intensity of 50 TW/cm2 of the initially transparent liquid sheet, and the emission of a plume of material. We find both events are due to the creation of a surface plasma and are similar to processes observed in dielectric solids. After calculating the electron density for different laser peak intensities, we find an electron scattering rate of 0.3 fs-1 in liquid isopropanol to be consistent with our data. We study the dynamics of the plasma plume to find the expansion velocity of the plume front.
ABSTRACT
We demonstrate a 100 kHz optical parametric chirped-pulse amplifier delivering under 4-cycle (38 fs) pulses at ~3.2 µm with an average power of 15.2 W with a pulse-to-pulse energy stability <0.7% rms and a single-shot CEP noise of 65 mrad RMS over 8h. This source is continuously monitored, by using a fast 100 kHz data acquisition device, and presents an extreme stability, in the short and long terms.
ABSTRACT
We demonstrate an optical parametric chirped-pulse amplifier delivering 4-cycles (38-fs) pulses centered around 3.1 µm at 100-kHz repetition rate with an average power of 4 W and an undersampled single-shot carrier-envelope phase noise of 81 mrad recorded over 25 min. The amplifier is pumped by a ~1.1 ps, Yb-YAG, thin-disk regenerative amplifier and seeded with a supercontinuum generated in bulk YAG from the same pump pulses. Carrier-envelope phase stability is passively achieved through difference-frequency generation between pump and seed pulses. An additional active stabilization at 10 kHz combining 2f-to-f interferometry and a LiNbO3 acousto-optic programmable dispersive filter achieves a record low phase noise.
