Role of Atomicity and Interface on InOx-TiO2 Composites: Thermo-Photo Valorization of CO2.

The synthesis, physicochemical, and functional properties of composite solids resulting from the surface spread of oxidized indium species onto nanoplatelets of anatase were investigated. Both the size and the interaction between the indium- and titanium-containing components control the functional properties. In the reduction of CO2 to CO, the best samples have an indium content between ca. 2 and 5 mol % and showed an excess rate over the photo and thermo-alone processes above 33% and an energy efficiency of 1.3%. Subnanometric (monomeric and dimeric) indium species present relatively weak thermal catalytic response but strong thermo-photo promotion of the activity. A gradual change in functional properties was observed with the growth of the indium content of the solids, leading to a progressive increase of thermal activity but lower thermo-photo promotion. The study provides a well-defined structure-activity relationship rationalizing the dual thermo-photo properties of the catalysts and establishes a guide for the development of highly active and stable composite solids for the elimination and valorization of CO2.

Atomic and Electronic Structures of Co-Doped In2O3 from Experiment and Theory.

The synthesis and properties of stoichiometric, reduced, and Co-doped In2O3 are described in the light of several experimental techniques, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), ultraviolet (UV)-visible spectroscopy, porosimetry, and density functional theory (DFT) methods on appropriate models. DFT-based calculations provide an accurate prediction of the atomic and electronic structure of these systems. The computed lattice parameter is linearly correlated with the experimental result in the Co concentration ranging from 1.0 to 5.0%. For higher Co concentrations, the theoretical-experimental analysis of the results indicates that the dopant is likely to be preferentially present at surface sites. The analysis of the electronic structure supports the experimental assignment of Co2+ for the doped material. Experiments and theory find that the presence of Co has a limited effect on the material band gap.

Functional mapping to reveal slow conduction and substrate progression in atrial fibrillation.

AIMS: The aim of our study was to analyse the response to short-coupled atrial extrastimuli to identify areas of hidden slow conduction (HSC) and their relationship with the atrial fibrillation (AF) phenotype. METHODS AND RESULTS: Twenty consecutive patients with paroxysmal AF and persistent AF (10:10) underwent the first pulmonary vein isolation procedure. Triple short-coupled extrastimuli were delivered in sinus rhythm (SR), and the evoked response was analysed: sites exhibiting double or highly fragmented electrograms (EGM) were defined as positive for HSC (HSC+). The delta of the duration of the bipolar EGM was analysed, and bipolar EGM duration maps were built. High-density maps were acquired using a multipolar catheter during AF, SR, and paced rhythm. Spatial co-localization of HSC+ and complex fractionated atrial EGMs (CFAE) during AF was evaluated. Persistent AF showed a higher number and percentage of HSC+ than paroxysmal AF (13.9% vs. 3.3%, P < 0.001). The delta of EGM duration was 53 ± 22 ms for HSC+ compared with 13 ± 11 (10) ms in sites with negative HSC (HSC-) (P < 0.001). The number and density of HSC+ were lower than CFAE during AF (19 vs. 56 per map, P < 0.001). The reproducibility and distribution of HSC+ in repeated maps were superior to CFAE (P = 0.19 vs. P < 0.001). Sites with negative and positive responses showed a similar bipolar voltage in the preceding sinus beat (1.65 ± 1.34 and 1.48 ± 1.47 mV, P = 0.12). CONCLUSION: Functional mapping identifies more discrete and reproducible abnormal substrates than mapping during AF. The HSC+ sites in response to triple extrastimuli are more frequent in persistent AF than in paroxysmal AF.

Green Thermo-Photo Catalytic Production of Syngas Using Pd/Nb-TiO2 Catalysts.

In this contribution, a series of Pd-promoted Nb-doped titania samples were essayed in the gas-phase thermo-photo production of syngas from methanol/water mixtures. The Pd loading was tested in the 0.1 to 2.5 wt % range, leading to the presence of metallic nanoparticles under reaction. Reaction rates exceeding 52 mmol H2 g-1 h-1 and quantum efficiencies above 33% were obtained. The optimum sample having a 0.5 wt % of Pd provided an outstanding synergy between light and heat under reaction conditions, facilitating the boost of activity with respect to the single-source processes and achieving high selectivity to syngas. The spectroscopic analysis of the physico-chemical ground of the activity unveiled that the noble metal interaction with the Nb-doped anatase support triggers a cooperative effect, promoting the evolution of formic acid-type methanol-derived carbon-containing species and rendering a significant enhancement of syngas production. The proposed thermo-photo system is thus a firm candidate to contribute to the new green circular economy.

Dynamics of Pd Subsurface Hydride Formation and Their Impact on the Selectivity Control for Selective Butadiene Hydrogenation Reaction.

Structure-sensitive catalyzed reactions can be influenced by a number of parameters. So far, it has been established that the formation of Pd-C species is responsible for the behavior of Pd nanoparticles employed as catalysts in a butadiene partial hydrogenation reaction. In this study, we introduce some experimental evidence indicating that subsurface Pd hydride species are governing the reactivity of this reaction. In particular, we detect that the extent of formation/decomposition of PdHx species is very sensitive to the Pd nanoparticle aggregate dimensions, and this finally controls the selectivity in this process. The main and direct methodology applied to determine this reaction mechanism step is time-resolved high-energy X-ray diffraction (HEXRD).

Techniques for the Investigation of Segmented Sensors Using the Two Photon Absorption-Transient Current Technique.

The two photon absorption-transient current technique (TPA-TCT) was used to investigate a silicon strip detector with illumination from the top. Measurement and analysis techniques for the TPA-TCT of segmented devices are presented and discussed using a passive strip CMOS detector and a standard strip detector as an example. The influence of laser beam clipping and reflection is shown, and a method that allows to compensate these intensity-related effects for investigation of the electric field is introduced and successfully employed. Additionally, the mirror technique is introduced, which exploits reflection at a metallised back side to enable the measurement directly below a top metallisation while illuminating from the top.

Fiber laser system of 1550 nm femtosecond pulses with configurable properties for the two-photon excitation of transient currents in semiconductor detectors.

A fiber laser system emitting ultrashort femtosecond pulses at 1550 nm with configurable properties has been developed as an excitation source for the two-photon absorption transient current technique (TPA-TCT). The modules of the system are designed to provide the optical specifications required at the output for localized characterization of semiconductor radiation detectors: variation of pulse energy between 10 nJ and 10p J, variation of the pulse repetition rate from 8.2 MHz to single shot, and variation of pulse duration between 300 and 600 fs. The validity of the system as an excitation source in the TPA-TCT is demonstrated by measuring spatially resolved excited charge carriers in a silicon detector.

Metabolomics reveals synergy between Ag and g-C3N4 in Ag/g-C3N4 composite photocatalysts: a unique feature among Ag-doped biocidal materials.

INTRODUCTION: The silver/graphitic carbon nitride (Ag/g-C3N4) composite system exerts biocidal activity against the pathogenic bacterium Escherichia coli 1337-H that is stronger than that of well-known silver and titanium oxide (TiO2)-based composites. However, whether the Ag/g-C3N4 composite system has biocidal properties that the parent components do or do not have as separate chemical entities and whether they differ from those in Ag/TiO2 composite photocatalysts have not been clarified. OBJECTIVE: We investigated the chemical (cooperative charge handling and electronic properties) and biological (metabolic) effects exerted by the addition of Ag to g-C3N4 and to TiO2. METHODS: In this work, we undertook metabolome-wide analysis by liquid chromatography-electrospray ionization-quadrupole-time of flight-mass spectrometry to compare the metabolite profiles of untreated E. coli 1337-H cells or those subjected to disinfection with Ag, g-C3N4, 2Ag/g-C3N4, TiO2 and 2Ag/TiO2. RESULTS: While Ag or g-C3N4 moderately affected microbial metabolism according to the mean of the altered metabolites, multiple cell systems contributing to rapid cell death were immediately affected by the light-triggered radical species produced when Ag and g-C3N4 were as xAg/g-C3N4. The effects include drastically reduced production of small metabolites essential for detoxifying reactive oxygen species and those that regulate DNA replication fidelity, cell morphology and energy status. These biological consequences were different from those caused by Ag/TiO2-based biocides, demonstrating the uniqueness of the Ag/g-C3N4 system. CONCLUSIONS: Our results support the idea that the unique Ag/g-C3N4 biocidal properties are based on synergistic action and reveal new directions for designing future photocatalysts for use in disinfection and microbial control.

Sunlight-Operated TiO2-Based Photocatalysts.

Photo-catalysis is a research field with broad applications in terms of potential technological applications related to energy production and managing, environmental protection, and chemical synthesis fields. A global goal, common to all of these fields, is to generate photo-catalytic materials able to use a renewable energy source such as the sun. As most active photocatalysts such as titanium oxides are essentially UV absorbers, they need to be upgraded in order to achieve the fruitful use of the whole solar spectrum, from UV to infrared wavelengths. A lot of different strategies have been pursued to reach this goal. Here, we selected representative examples of the most successful ones. We mainly highlighted doping and composite systems as those with higher potential in this quest. For each of these two approaches, we highlight the different possibilities explored in the literature. For doping of the main photocatalysts, we consider the use of metal and non-metals oriented to modify the band gap energy as well as to create specific localized electronic states. We also described selected cases of using up-conversion doping cations. For composite systems, we described the use of binary and ternary systems. In addition to a main photo-catalyst, these systems contain low band gap, up-conversion or plasmonic semiconductors, plasmonic and non-plasmonic metals and polymers.

Characterization of Photo-catalysts: From Traditional to Advanced Approaches.

The article provides an overview of the most relevant characterization results of heterogeneous photo-catalytic materials available in the literature. First, we present a summary of the ex situ utilization of physico-chemical characterization techniques. In the majority of current works, pre and post-reaction samples are subjected to ex situ analysis using a multitechnique approach which attempts to render information about the morphological, structural, and electronic properties of relevance to interpret photoactivity. Details of the effects on physico-chemical observables of the nanostructure and the complex chemical nature (considering mono and multiphase materials with presence of several chemical elements) of typical photo-catalysts will be analyzed. Modern studies however emphasize the use of in situ tools in order to establish activity-structure links. To this end, the first point to pay attention to is to consider carefully the interaction between light and matter at the reaction cell where the characterization is carried out. Operando and spectro-kinetic methodologies will be reviewed as they would render valuable and trusting results and thus will pave the way for the future developments in photocatalysis.

A flexible cell for in situ combined XAS-DRIFTS-MS experiments.

A new cell for in situ combined X-ray absorption, diffuse reflectance IR Fourier transform and mass spectroscopies (XAS-DRIFTS-MS) is presented. The cell stands out among others for its achievements and flexibility. It is possible to perform XAS measurements in transmission or fluorescence modes, and the cell is compatible with external devices like UV-light and Raman probes. It includes different sample holders compatible with the different XAS detection modes, different sample forms (free powder or self-supporting pellet) and different sample loading/total absorption. Additionally, it has a small dead volume and can operate over a wide range of temperature (up to 600°C) and pressure (up to 5 bar). Three research examples will be shown to illustrate the versatility of the cell. This cell covers a wider range of applications than any other cell currently known for this type of study.

Thermo-Photocatalysis: Environmental and Energy Applications.

Catalysis is an integral part of a majority of chemical operations focused on the generation of value-added chemicals or fuels. Similarly, the extensive use of fossil-derived fuels and chemicals has led to deterioration of the environment. Catalysis currently plays a key role in mitigating such effects. Thermal catalysis and photocatalysis are two well-known catalytic approaches that were applied in both energy and environmental fields. Thermo-photocatalysis can be understood as a synergistic effect of the two catalytic processes with key importance in the use of solar energy as thermal and light source. This Review provides an update on relevant contributions about thermo-photocatalytic systems for environmental and energy applications. The reported activity data are compared with the conventional photocatalytic approach and the base of the photothermal effect is analyzed. Some of the systems based on the positive aspects of thermo- and photocatalysis could be the answer to the energy and environmental crisis when taking into account the outstanding results with regard to chemical efficiency and energy saving.

Braiding kinetics and spectroscopy in photo-catalysis: the spectro-kinetic approach.

The combination of kinetic and spectroscopic tools has become a key scientific methodology for the understanding of catalytic behavior but its application in photocatalysis has inherent difficulties due to the nature of the energy source of the reaction. This review article provides an overview of its use by, first, presenting mechanistically derived kinetic formulations and spectroscopic data handling methods including intrinsic expressions for light and, second, highlighting representative examples of application. To do it we consider universal catalytic systems, particularly (although not exclusively) titania-based materials, and the most frequent hole and/or electron triggered reaction schemes. This review also provides a general framework to pave the way for the future progress of the spectro-kinetic approach in the photocatalysis area.

Highly Active Catalytic Ruthenium/TiO2 Nanomaterials for Continuous Production of γ-Valerolactone.

Green energy production from renewable sources is an attractive, but challenging topic to face the likely energy crisis scenario in the future. In the current work, a series of versatile Ru/TiO2 catalysts were simply synthesized and employed in continuous-flow catalytic transfer hydrogenation of industrially derived methyl levulinate biowaste (from Avantium Chemicals B.V.) to form γ-valerolactone. Different analytical techniques were applied in the characterization of the as-synthesized catalysts, including XRD, SEM, energy-dispersion X-ray spectroscopy, TEM, and X-ray photoelectron spectroscopy. The effects of various reaction conditions (e.g., temperature, concentration, and flow rate) were investigated. Results suggested that optimum dispersion and distribution of Ru on the TiO2 surface could efficiently promote the production of γ-valerolactone; the 5 % Ru/TiO2 catalyst provided excellent catalytic performance and stability compared with commercial Ru catalysts.

Phase-Contact Engineering in Mono- and Bimetallic Cu-Ni Co-catalysts for Hydrogen Photocatalytic Materials.

Understanding how a photocatalyst modulates its oxidation state, size, and structure during a photocatalytic reaction under operando conditions is strongly limited by the mismatch between (catalyst) volume sampled by light and, to date, the physicochemical techniques and probes employed to study them. A synchrotron micro-beam X-ray absorption spectroscopy study together with the computational simulation and analysis (at the X-ray cell) of the light-matter interaction occurring in powdered TiO2 -based monometallic Cu, Ni and bimetallic CuNi catalysts for hydrogen production from renewables was carried out. The combined information unveils an unexpected key catalytic role involving the phase contact between the reduced and oxidized non-noble metal phases in all catalysts and, additionally, reveals the source of the synergistic Cu-Ni interaction in the bimetallic material. The experimental method is applicable to operando studies of a wide variety of photocatalytic materials.

Surface CuO, Bi2O3, and CeO2 Species Supported in TiO2-Anatase: Study of Interface Effects in Toluene Photodegradation Quantum Efficiency.

The enhancement of active triggered by surface deposition of Cu, Bi, and Ce containing oxidic species onto a high surface area anatase is analyzed through the calculation of the quantum efficiency for toluene photodegradation under UV and Sunlight-type illumination. To this end, series of Cu, Bi, and Ce containing oxides supported on anatase were synthesized having a growing content of the Cu, Bi, and Ce surface species and characterized with X-ray diffraction and photoelectron, UV-visible, and photoluminescence spectroscopies as well as transmission electron microscopy. Utilizing the surface concentration of Cu, Bi, and Ce species as a tool, we analyzed the influence of the system physicochemical properties affecting quantum efficiency in anatase-based materials. First, employing small surface concentrations of the Cu, Bi, and Ce species deposited onto (the unperturbed) anatase, we provided evidence that all steps of the photocatalytic event, including light absorption, charge recombination, as well as surface interaction with the pollutant and chemical output as to activity and selectivity have significance in the quantitative assessment of the enhancement of the efficiency parameter. Second, we analyzed samples rendering maximum quantum efficiency within all these series of materials. The study indicates that maximum enhancement over anatase displays a magnitude strongly dependent on the efficiency level of calculation and would thus require the use of the most accurate one, and that it occurs through a balance between optoelectronic and chemical properties of the composite materials. The (Cu, Bi, Ce) oxide-anatase interface plays a major role modulating the optoelectronic properties of the solids and thus the efficiency observable.

Interface Effects in Sunlight-Driven Ag/g-C3N4 Composite Catalysts: Study of the Toluene Photodegradation Quantum Efficiency.

Metallic silver (ranging from 1 to 10 wt %) was deposited onto a graphite-like carbon nitride photocatalyst through a microemultion method. Surface, morphological, and structural properties of the resulting materials were characterized using BET and porosity measurements, X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and UV-vis and photoluminescence spectroscopy. The activity of the composite samples under sunlight-type and visible illumination was measured for toluene photodegradation and was analyzed by means of the reaction rate and the quantum efficiency parameter. To obtain the latter observable, the lamp emission properties as well as the radiation field interaction with the catalyst inside the reactor were modeled and numerically calculated. The stability of the samples under both illumination conditions was also studied. The results evidence that the composite samples containing 1-10 silver wt % outperform carbon nitride for sunlight-type and visible illumination, but the optimal use of the charge generated after light absorption is obtained for the sample with 1 wt % of silver acording to the quantum efficiency calculation. The study shows that the optimum silver-g-C3N4 contact is able to outperform TiO2 reference systems (nano-TiO2 and P25) under sunlight illumination and points out that this occurs as a direct consequence of the charge handling through the interface between catalyst components. This indicates that composite systems based on g-C3N4 can be competitive in sunlight-triggered photodegradation processes to eliminate tough polluctants such as toluene, rendering active and stable systems.

Morphological and structural behavior of TiO2 nanoparticles in the presence of WO3: crystallization of the oxide composite system.

Composite TiO2-WO3 oxide materials were prepared by a single pot microemulsion method and studied during calcination treatments under dry air in order to analyze the influence of tungsten on the behavior of the dominant titania component. To this end, the surface and bulk morphological and structural evolution of the solid precursors was studied using X-ray diffraction and infrared spectroscopy. In the calcination process, differences in the dominant titania component behavior appeared as a function of the W/Ti atomic ratio of the precursor. First, the crystallization of the anatase phase is affected by tungsten through an effect on the primary particle size growth. Furthermore, such an effect also influences the anatase to rutile phase transformation. The study provides evidence that the W-Ti interaction develops differently for a low/high W/Ti atomic ratio below/above 0.25 affecting fundamentally the above-mentioned anatase primary particle size growth process and the subsequent formation of the rutile phase and showing that addition of tungsten provides a way to control morphology and phase behavior in anatase-based oxide complex materials.

Understanding the antimicrobial mechanism of TiO2-based nanocomposite films in a pathogenic bacterium.

Titania (TiO2)-based nanocomposites subjected to light excitation are remarkably effective in eliciting microbial death. However, the mechanism by which these materials induce microbial death and the effects that they have on microbes are poorly understood. Here, we assess the low dose radical-mediated TiO2 photocatalytic action of such nanocomposites and evaluate the genome/proteome-wide expression profiles of Pseudomonas aeruginosa PAO1 cells after two minutes of intervention. The results indicate that the impact on the gene-wide flux distribution and metabolism is moderate in the analysed time span. Rather, the photocatalytic action triggers the decreased expression of a large array of genes/proteins specific for regulatory, signalling and growth functions in parallel with subsequent selective effects on ion homeostasis, coenzyme-independent respiration and cell wall structure. The present work provides the first solid foundation for the biocidal action of titania and may have an impact on the design of highly active photobiocidal nanomaterials.

Biodegradable polycaprolactone-titania nanocomposites: preparation, characterization and antimicrobial properties.

Nanocomposites obtained from the incorporation of synthesized TiO2 nanoparticles (≈10 nm average primary particle size) in different amounts, ranging from 0.5 to 5 wt.%, into a biodegradable polycaprolactone matrix are achieved via a straightforward and commercial melting processing. The resulting nanocomposites have been structurally and thermally characterized by transmission electron microscopy (TEM), wide/small angle X-ray diffraction (WAXS/SAXS, respectively) and differential scanning calorimetry (DSC). TEM evaluation provides evidence of an excellent nanometric dispersion of the oxide component in the polymeric matrix, with aggregates having an average size well below 100 nm. Presence of these TiO2 nanoparticles induces a nucleant effect during polymer crystallization. Moreover, the antimicrobial activity of nanocomposites has been tested using both UV and visible light against Gram-negative Escherichia coli bacteria and Gram-positive Staphylococcus aureus. The bactericidal behavior has been explained through the analysis of the material optical properties, with a key role played by the creation of new electronic states within the polymer-based nanocomposites.