Total analysis system for the determination of uremic toxins in human plasma based on bead injection solid phase extraction hyphenated to mass spectrometry.

Indoxyl sulfate (INDS) and p-cresol sulfate (pCS) are two of the most relevant uremic toxins that are recognized to have an essential role in chronic kidney disease (CKD) progression and associated cardiovascular risk. Thus, it is crucial to accurately assess their circulating levels in the body. Aiming at establishing an analytical strategy for quantification of INDS and pCS in human plasma, an automatic on-line micro-solid-phase extraction (µSPE) procedure hyphenated to tandem mass spectrometry (MS/MS) detection without previous chromatographic separation was herein developed. The bead injection (BI) concept was used to implement the µSPE procedure in the lab-on-valve (LOV) format. After studying the extraction conditions, the anion-exchange OASIS WAX sorbent beads (10 mg) and 99% ACN-H2O (15:85, v/v)-1% (v/v) NH4OH were chosen as sorbent and eluent, respectively, as they provided the highest analyte recoveries. Subsequently, the µSPE-BI-LOV system was hyphenated on-line to a MS/MS detector and the full analytical cycle, comprising sample preparation and analytes detection, was completed in <20 min. The developed µSPE-BI-LOV-MS methodology presented good linearity (r2 > 0.999) for quantification of the target analytes at concentrations ranging from 18 to 360 µg mL-1 in plasma. LOQ values were 2 µg mL-1 for INDS and 7 µg mL-1 for pCS in plasma. Human plasma samples from healthy subjects and individuals with CKD were successfully analyzed using the developed approach. The proposed automatic methodology can be described as an eco-friendly strategy, with a favorable score of 0.64 after greenness evaluation using the AGREE metric.

Photoactive immunoconjugates for targeted photodynamic therapy of cancer.

Photodynamic therapy (PDT) has been used as an alternative or as a complement of conventional approaches for cancer treatment. In PDT, the reactive oxygen species (ROS) produced from the interaction between the photosensitizer (PS), visible light and molecular oxygen, kill malignant cells by triggering a cascade of cytotoxic reactions. In this process, the PS plays an extremely important role in the effectiveness of the therapy. In the present work, a new photoimmunoconjugate (PIC), based on cetuximab and the known third generation PS-glycophthalocyanine ZnPcGal4, was synthesized via reductive amination. The rationale behind this was the simultaneous cancer-associated specific targeting of PIC and photosensitization of targeted receptor positive cells. Varied reaction parameters and photodynamic conditions, such as PS concentrations and both type and intensities of light, were optimized. ZnPcGal4 showed significant photoactivity against EGFR expressing A431, EGFR-transfected HCT116 and HT29 cells when irradiated with white light of stronger intensity (38 mW/cm2). Similarly, the synthesized PICs-T1 and T2 also demonstrated photoactivity with high intensity white light. The best optimized PIC: sample 28 showed no precipitation and aggregation when inspected visually and analyzed through SE-HPLC. Fluorescence excitation of sample 28 and 125I-sample 28 radioconjugate (125I-PIC, 125I-radiolabeling yield ≥95%, determined with ITLC) at 660 nm showed presence of appended ZnPcGal4. In addition, simultaneous fluorescence and radioactivity detection of the 125I-PIC in serum and PBS (pH 7.4) for the longest incubated time point of 72 h, respectively, and superimposed signals thereof demonstrated ≥99% of loading and/or labeling yield, assuring overall stability of the PIC and corresponding PIC-radioconjugate w.r.t. both the appended ZnPcGal4 and bound-125I. Moreover, real-time binding analyses on EGFR-transfected HCT116 cells showed specific binding of 125I-PIC, suggesting no alternation in the binding kinetics of the mAb after appending it with ZnPcGal4. These results suggest dual potential applications of synthesized PICs both for PDT and radio-immunotherapy of cancer.

Sample preparation and chromatographic methods for the determination of protein-bound uremic retention solutes in human biological samples: An overview.

Protein-bound uremic retention solutes, such as indole-3-acetic acid, indoxyl sulfate, p-cresol and p-cresol sulfate, are associated with the development of several pathologies, namely renal, cardiovascular, and bone toxicities, due to their potential accumulation in the human body, thus requiring analytical methods for monitoring and evaluation. The present review addresses conventional and advanced sample treatment procedures for sample handling and the chromatographic analytical methods developed for quantification of these compounds in different biological fluids, with particular focus on plasma, serum, and urine. The sample preparation and chromatographic methods coupled to different detection systems are critically discussed, focusing on the different steps involved for sample treatment, namely elimination of interfering compounds present in the sample matrix, and the evaluation of their environmental impact through the AGREEprep tool. There is a clear trend for the application of liquid-chromatography coupled to tandem mass spectrometry, which requires protein precipitation, solid-phase extraction and/or dilution prior to analysis of biological samples. Furthermore, from a sustainability point of view, miniaturized methods resorting to microplate devices are highly recommended.

Rapid and sustainable HPLC method for the determination of uremic toxins in human plasma samples.

Protein-bound uremic toxins, mainly indoxyl sulfate (3-INDS), p-cresol sulfate (pCS), and indole-3-acetic acid (3-IAA) but also phenol (Pol) and p-cresol (pC), are progressively accumulated during chronic kidney disease (CKD). Their accurate measurement in biomatrices is demanded for timely diagnosis and adoption of appropriate therapeutic measures. Multianalyte methods allowing the establishment of a uremic metabolite profile are still missing. Hence, the aim of this work was to develop a rapid and sensitive method based on high-performance liquid chromatography with fluorescence detection for the simultaneous quantification of Pol, 3-IAA, pC, 3-INDS, and pCS in human plasma. Separation was attained in 12 min, using a monolithic C18 column and isocratic elution with acetonitrile and phosphate buffer containing an ion-pairing reagent, at a flow rate of 2 mL min-1. Standards were prepared in plasma and quantification was performed using the background subtraction approach. LOQ values were ≤ 0.2 µg mL-1 for all analytes except for pCS (LOQ of 2 µg mL-1). The method proved to be accurate (93.5-112%) and precise (CV ≤ 14.3%). The multianalyte application of the method, associated to a reduced sample volume (50 µL), a less toxic internal standard (eugenol) in comparison to the previously applied 2,6-dimethylphenol and 4-ethylphenol, and a green extraction solvent (ethanol), resulted in the AGREE score of 0.62 which is in line with the recent trend of green and sustainable analytical chemistry. The validated method was successfully applied to the analysis of plasma samples from control subjects exhibiting normal levels of uremic toxins and CKD patients presenting significantly higher levels of 3-IAA, pC, 3-INDS, and pCS that can be further investigated as biomarkers of disease progression.

Automatic and renewable micro-solid-phase extraction based on bead injection lab-on-valve system for determination of tranexamic acid in urine by UHPLC coupled with tandem mass spectrometry.

An automatic micro-solid-phase extraction (µSPE) method using on-line renewable sorbent beads followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) was established for the determination of tranexamic acid (TXA) in urine. The µSPE method was based on the bead injection (BI) concept combined with the mesofluidic lab-on-valve (LOV) platform. All steps of the µSPE-BI-LOV were implemented by computer programming, rendering enhanced precision on time and flow events. Several parameters, including the type of sorbent, volume and composition of the conditioning solution, washing solution, and eluent composition, were evaluated to improve the extraction efficiency. The best results were obtained with a hydrophilic-lipophilic balanced mixed-mode sorbent, decorated with sulfonic acid groups (Oasis MCX), and 99% acetonitrile-water (50:50, v/v)-1% ammonium hydroxide as eluent. Chromatographic separation was performed using a BEH amide column coupled to MS/MS detection in positive ionization mode. Good linearity was achieved (R2 > 0.998) for TXA concentrations in urine ranging from 300 to 3000 ng mL-1, with LOD and LOQ of 30 and 65 ng mL-1, respectively. Dilution integrity was observed for dilution factors up to 20,000 times, providing the extension of the upper limit of quantification to 12 mg mL-1. The method was validated according to international guidelines and successfully applied to urine samples collected during scoliosis surgery of pediatric patients treated with TXA.

Acetonitrile Adducts of Tranexamic Acid as Sensitive Ions for Quantification at Residue Levels in Human Plasma by UHPLC-MS/MS.

The quantitative analysis of pharmaceuticals in biomatrices by liquid chromatography coupled with electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) is often hampered by adduct formation. The use of the molecular ion resulting from solvent adducts for quantification is uncommon, even if formed in high abundance. In this work, we propose the use of a protonated acetonitrile adduct for the quantitative analysis of tranexamic acid (TXA) by LC-MS/MS. The high abundance of the protonated acetonitrile adduct [M + ACN + H]+ was found to be independent of source-dependent parameters and mobile phase composition. The results obtained for TXA analysis in clinical samples were comparable for both [M + ACN + H]+ and [M + H]+, and no statistically significant differences were observed. The relative stability and structure of the [M + ACN + H]+ ions were also studied by analyzing probable structures from an energetic point of view and by quantum chemical calculations. These findings, and the studied fragmentation pathways, allowed the definition of an acetimidium structure as the best ion to describe the observed acetonitrile protonated adduct of TXA.

Insights on Ultrafiltration-Based Separation for the Purification and Quantification of Methotrexate in Nanocarriers.

The evaluation of encapsulation efficiency is a regulatory requirement for the characterization of drug delivery systems. However, the difficulties in efficiently separating nanomedicines from the free drug may compromise the achievement of accurate determinations. Herein, ultrafiltration was exploited as a separative strategy towards the evaluation of methotrexate (MTX) encapsulation efficiency in nanostructured lipid carriers and polymeric nanoparticles. The effect of experimental conditions such as pH and the amount of surfactant present in the ultrafiltration media was addressed aiming at the selection of suitable conditions for the effective purification of nanocarriers. MTX-loaded nanoparticles were then submitted to ultrafiltration and the portions remaining in the upper compartment of the filtering device and in the ultrafiltrate were collected and analyzed by HPLC-UV using a reversed-phase (C18) monolithic column. A short centrifugation time (5 min) was suitable for establishing the amount of encapsulated MTX in nanostructured lipid carriers, based on the assumption that the free MTX concentration was the same in the upper compartment and in the ultrafiltrate. The defined conditions allowed the efficient separation of nanocarriers from the free drug, with recoveries of >85% even when nanoparticles were present in cell culture media and in pig skin surrogate from permeation assays.

Flow-Based Dynamic Approach to Assess Bioaccessible Zinc in Dry Dog Food Samples.

This work proposes a simple and easy-to-use flow-through system for the implementation of dynamic extractions, aiming at the evaluation of bioaccessible zinc and the characterization of leaching kinetics in dry dog food samples. The kinetic profile of Zn extraction was determined by flame atomic absorption spectroscopy and the results were fitted in an exponential function (R2 > 0.960) compatible with a two first-order reactions model. Values of fast leachable Zn ranged from 83 ± 1 to 313 ± 5 mg of Zn per kg of sample, with associated rate constants ranging from 0.162 ± 0.004 to 0.290 ± 0.014 min-1. Similar results were observed compared to the static batch extraction. The percentage of bioaccessible Zn ranged from 49.0 to 70.0%, with an average value of 58.2% in relation to total Zn content. Principal component analysis regarding the variables fast leachable Zn, associated rate constant, total Zn, and market segment, has shown that 84.6% of variance is explained by two components, where the second component (24.0%) presented loadings only for the fast leachable Zn and associated rate constant. The proposed method is suitable for the fast evaluation (<1 h) of leaching kinetics and bioaccessibility in dry dog food.

Chemistry, bioactivities, extraction and analysis of azadirachtin: State-of-the-art.

Azadirachta indica A. Juss. (Neem) is an Indian tree recognized for its activity as pesticide, as well as several pharmacological properties. Among the various compounds already isolated and studied from Neem tree, azadirachtin (AZA) was identified as the main bioactive compound. Azadirachtin can be found at different parts of the Neem plant but assumes its maximum concentration at the seed level. This compound features a quite complex chemical structure, which justifies the 20-plus-year difficulty to identify the synthetic pathway that subsequently permitted to carry out its artificial synthesis. Azadirachtin is widely used as a basis for production of biopesticides; nevertheless, other properties have been recognized for this substance, among which the anticancer and antimalarial activity stand out. The methods available for azadirachtin extraction are diverse, including solid-liquid extraction and extraction with solvents at high or low temperatures. Alcohol based solvents are associated with higher extraction yields and are therefore preferred for the isolation of azadirachtin from plant parts. Clean-up of the extracts is generally required for further purification. The highest azadirachtin levels have been obtained from Neem seeds but concentration values present a large variation between batches. Therefore, in addition to extraction procedures, it is essential to establish routine methods for azadirachtin identification and quantification. Chromatography-based techniques are preferably selected for detection and quantification of azadirachtin in plant matrices. Overall, this process will guarantee a future reproducible, safe and effective use of the extracts in formulations for commercial applications.

Photoimmunoconjugates: novel synthetic strategies to target and treat cancer by photodynamic therapy.

Photodynamic therapy (PDT) combines a photosensitizer (PS) with the physical energy of non-ionizing light to trigger cell death pathways. PDT has potential as a therapeutic modality to be used in alternative or in combination with other conventional cancer treatment protocols (e.g. surgery, chemotherapy and radiotherapy). Still, due to the lack of specificity of the current PSs to target the tumor cells, several studies have exploited their conjugation with targeting moieties. PSs conjugated with antibodies (Abs) or their fragments, able to bind antigens overexpressed in the tumors, have demonstrated potential in PDT of tumors. This review provides an overview of the most recent advances on photoimmunoconjugates (PICs) for cancer PDT, which involve the first and second-generation PSs conjugated to Abs. This is an update of our previous review "Antibodies armed with photosensitizers: from chemical synthesis to photobiological applications", published in 2015 in Org. Biomol. Chem.

Chromatographic method for the simultaneous quantification of dapsone and clofazimine in nanoformulations.

The low bioavailability and nonspecific distribution of dapsone and clofazimine, commonly applied in combination for the treatment of leprosy, can produce toxic effects. Nanotechnological approaches enhance the delivery of these drugs. Therefore, a high-performance liquid chromatography method was developed for the simultaneous determination of dapsone and clofazimine loaded in nanoformulations for quality control purposes. Chromatographic separation was achieved on a reversed-phase Kinetex core-shell C18 column, followed by spectrophotometric detection at 280 nm. Considering the different physicochemical properties of dapsone and clofazimine, elution was performed in gradient mode using an aqueous acetate buffer (50 mmol/L, pH 4.8) and an increasing acetonitrile content from 27 to 63% v/v at a flow rate of 1.0 mL/min with retention times of 6.2 and 14.0 min, respectively. The method was validated according to the European Medicines Agency guideline and it was found to be specific, accurate (99.6-114.0%), and precise for intra- (RSD ≤ 1.8%) and interday assays (RSD ≤ 12.5%). Both drugs showed stability after 24 h at room temperature and over three freeze-thaw cycles with recoveries ≥86.2%. Low temperature (4°C) in the autosampler caused the precipitation of clofazimine and must be avoided. The validated method was successfully applied in the quantification of both drugs in nanoformulations.