InP integrated optical frequency comb generator using an amplified recirculating loop.

A novel realisation of photonically integrated optical frequency comb generation is demonstrated on indium phosphide (InP) using a generic foundry platform. The architecture, based on the amplified recirculating loop technique, consists of cascaded electro-optic phase modulators embedded within a short waveguide loop. While an injected continuous wave laser signal is recirculated by the loop, the modulators are driven with a modulation frequency corresponding to the round-trip loop length frequency. This results in many phase coherent, evenly spaced optical comb lines being generated. The choice of InP as an integration platform allows immediate optical amplification of the modulated signal by embedded semiconductor optical amplifiers, enabling loop losses to be compensated and expanding the comb across broad optical bandwidths. This approach reduces the requirement for external, high-power optical amplifiers, improving the compactness and power efficiency of the full system. The system was modelled to identify off-resonance behaviour, outlining limits in matching both the modulation frequency and seed laser frequency to the round-trip loop frequency for optimal comb line generation to be achieved. The experimental device occupied a fraction of the 6 x 2 mm2 InP chip and operated at round-trip loop frequencies of 6.71 GHz to produce 59 comb lines within a 20 dB power envelope. All comb lines exhibited strong phase coherence as characterised by low composite phase noise measurements of -105 dBc/Hz at 100 kHz. A second device is also presented with a shorter loop length operating at ∼10 GHz which generated 57 comb lines. Both loop configurations included short waveguide phase shifters providing a degree of tunability of the free spectral range with a tuning range of 150 MHz for small injection currents of < 2.5 mA.

Foundry fabricated photonic integrated circuit optical phase lock loop.

This paper describes the first foundry-based InP photonic integrated circuit (PIC) designed to work within a heterodyne optical phase locked loop (OPLL). The PIC and an external electronic circuit were used to phase-lock a single-line semiconductor laser diode to an incoming reference laser, with tuneable frequency offset from 4 GHz to 12 GHz. The PIC contains 33 active and passive components monolithically integrated on a single chip, fully demonstrating the capability of a generic foundry PIC fabrication model. The electronic part of the OPLL consists of commercially available RF components. This semi-packaged system stabilizes the phase and frequency of the integrated laser so that an absolute frequency, high-purity heterodyne signal can be generated when the OPLL is in operation, with phase noise lower than -100 dBc/Hz at 10 kHz offset from the carrier. This is the lowest phase noise level ever demonstrated by monolithically integrated OPLLs.

Terahertz generation mechanism in nano-grating electrode photomixers on Fe-doped InGaAsP.

We report the generation mechanism associated with nano-grating electrode photomixers fabricated on Fe-doped InGaAsP substrates. Two different emitter designs incorporating nano-gratings coupled to the same broadband antenna were characterized in a continuous-wave terahertz (THz) frequency system employing telecommunications wavelength lasers for generation and coherent detection. The current-voltage characteristics and THz emission bandwidth of the emitters is compared for different bias polarities and optical polarisations. The THz output from the emitters is also mapped as a function of the position of the laser excitation spot for both continuous-wave and pulsed excitation. This mapping, together with full-wave simulations of the structures, confirms the generation mechanism to be due to an enhanced optical electric field at the grating tips resulting in increased optical absorption, coinciding with a concentration of the electrostatic field.

Optical injection locking to optical frequency combs for superchannel coherent detection.

Optical injection locking characteristics of a distributed feedback laser are experimentally investigated for multiple-wavelength injection. Using a three-wavelength source generated by intensity modulation as the injected signal, it was found that the presence of adjacent lines could cause disturbance to the locking if a minimum guard band between the respective locking limits of two adjacent lines was not observed. With a 21-line comb with 20 GHz line spacing as the injected signal, the injection locking range was observed to become asymmetrical in relation to the laser free-running frequency under high-power injection conditions and was found to be dependent on whether the laser was locked to lines located at centre and or edges of the comb. Finally, the use of the injection locked laser as a seed laser for generating a local oscillator (LO) comb for superchannel coherent detection was investigated and the phase error between the input and LO combs analysed.

Photonic generation for multichannel THz wireless communication.

We experimentally demonstrate photonic generation of a multichannel THz wireless signal at carrier frequency 200 GHz, with data rate up to 75 Gbps in QPSK modulation format, using an optical heterodyne technique and digital coherent detection. BER measurements were carried out for three subcarriers each modulated with 5 Gbaud QPSK or for two subcarriers modulated with 10 Gbaud QPSK, giving a total speed of 30 Gbps or 40 Gbps, respectively. The system evaluation was also performed with three subcarriers modulated with 12.5 Gbaud QPSK (75 Gbps total) without and with 40 km fibre transmission. The proposed system enhances the capacity of high-speed THz wireless transmission by using spectrally efficient modulated subcarriers spaced at the baud rate. This approach increases the overall transmission capacity and reduces the bandwidth requirement for electronic devices.

Optical injection locking of monolithically integrated photonic source for generation of high purity signals above 100 GHz.

A monolithically integrated photonic source for tuneable mm-wave signal generation has been fabricated. The source consists of 14 active components, i.e. semiconductor lasers, amplifiers and photodetectors, all integrated on a 3 mm(2) InP chip. Heterodyne signals in the range between 85 GHz and 120 GHz with up to -10 dBm output power have been successfully generated. By optically injection locking the integrated lasers to an external optical comb source, high-spectral-purity signals at frequencies >100 GHz have been generated, with phase noise spectral density below -90 dBc/Hz being achieved at offsets from the carrier greater than 10 kHz.

Coherent terahertz photonics.

We present a review of recent developments in THz coherent systems based on photonic local oscillators. We show that such techniques can enable the creation of highly coherent, thus highly sensitive, systems for frequencies ranging from 100 GHz to 5 THz, within an energy efficient integrated platform. We suggest that such systems could enable the THz spectrum to realize its full applications potential. To demonstrate how photonics-enabled THz systems can be realized, we review the performance of key components, show recent demonstrations of integrated platforms, and give examples of applications.

Monolithically integrated heterodyne optical phase-lock loop with RF XOR phase detector.

We present results for an heterodyne optical phase-lock loop (OPLL), monolithically integrated on InP with external phase detector and loop filter, which phase locks the integrated laser to an external source, for offset frequencies tuneable between 0.6 GHz and 6.1 GHz. The integrated semiconductor laser emits at 1553 nm with 1.1 MHz linewidth, while the external laser has a linewidth less than 150 kHz. To achieve high quality phase locking with lasers of these linewidths, the loop delay has been made less than 1.8 ns. Monolithic integration reduces the optical path delay between the laser and photodiode to less than 20 ps. The electronic part of the OPLL was implemented using a custom-designed feedback circuit with a propagation delay of ~1 ns and an open-loop bandwidth greater than 1 GHz. The heterodyne signal between the locked slave laser and master laser has phase noise below -90 dBc/Hz for frequency offsets greater than 20 kHz and a phase error variance in 10 GHz bandwidth of 0.04 rad2.

Effective homodyne optical phase locking to PSK signal by means of 8b10b line coding.

We demonstrate a novel technique that allows effective homodyne optical phase locking to a phase shift keying (PSK) signal with a residual carrier. We exploit 8b10b coding of the signal in order to reduce its low frequency spectral content, suppressing the data-to-phase crosstalk effect. In a transmission experiment on a 10 Gb/s binary PSK signal (8 Gb/s before coding), we achieved transmission over 215 km of dispersion-compensated, installed single-mode fibre, with no penalty compared to back-to-back at a bit error ratio of 10(-3). The proposed solution is applicable to other modulation formats, including multi-level amplitude and/or phase modulation formats.

Optoelectronic detection of millimetre-wave signals with travelling-wave uni-travelling carrier photodiodes.

Optically pumped mixing in travelling-wave uni-travelling carrier photodiodes is proposed as a novel technique for detecting millimetre-wave signals. An experimental demonstration was performed at a frequency of 100 GHz. From DC measurements, an increase in the responsivity was found at high levels of optical power. The mixing mechanism is attributed to the variation of the responsivity with the applied reverse bias and the optical input power. The maximum intermediate frequency power was found to be -35 dBm for a 4 dBm radio frequency power, while an average conversion loss of 40 dB was achieved. A wide dynamic range of more than 42 dB was measured, limited by the maximum available millimetre-wave power.