The effects of corticotomy and piezocision in orthodontic canine retraction: a randomized controlled clinical trial.

BACKGROUND: The aims of this study were to evaluate the efficacy of alveolar corticotomy (AC) and piezocision (PZ) in accelerating maxillary canine retraction, and their effects on multiple bone remodeling expression in gingival crevicular fluid (GCF). A split-mouth, randomized controlled clinical trial was performed at the Department of Orthodontics of Pontifical Catholic University of Minas Gerais, Brazil. Eligibility criteria included orthodontic need for first maxillary premolars extractions, followed by canine retraction. Fifty-one adult patients were recruited and randomly assigned to 3 groups (allocation ratio 1:1:1). Random allocation of surgical or control interventions to each side of the maxillary arch was also conducted: G1 - AC × Control, G2 - PZ × Control, and G3 - AC × PZ. Both the definition of the group and the decision of the experimental or control sides were randomized by the software. Intraoral digital scans were performed before, 7 and 14 days after the beginning of canine retraction, and subsequently, at every 14 days until a maximum period of 6 months. GCF samples were collected before, and 1, 2, 4, 8, and 12 weeks. The primary outcome consisted in the cumulative distal movement of the canines and was measured by digital model superimposition. The secondary outcome consisted in GCF bone remodeling samples that were quantified in a multiplex immunoassay. The measurements examinator was properly blinded. RESULTS: Forty-seven patients, 19 males and 28 females, were analyzed (mean age 20.72, SD = 6.66, range 15 to 38). Statistically significant differences in canine distal movement between AC and control in G1 were not observed (p > 0.05). In G2, PZ showed lower cumulative incisal and cervical measurements than control from the 2nd to the 24th week (p < 0.05). In G3, PZ showed a lower cumulative incisal and cervical measurements than AC from the16th to the 24th week (p < 0.05). In all groups, differences on biomarkers expression occurred at specific timepoints (p < 0.05), but a distinct pattern was not observed. CONCLUSIONS: AC and PZ were not effective to accelerate maxillary canine retraction and did not induce a distinct pattern of biomarker expression. TRIAL REGISTRATION: NCT03089996 . Registered 24 March 2017 - Registered.

Effects of piezocision in orthodontic tooth movement: A systematic review of comparative studies.

BACKGROUND: The aim of this systematic review was to evaluate the effects of piezocision in accelerating orthodontic tooth movement (OTM) and its possible adverse effects. MATERIAL AND METHODS: The Databases Medline, Embase, CENTRAL and LILACS were searched until March 2019, for randomized controlled trials (RCTs) and controlled clinical trials (CCTs) that used piezocision associated with orthodontic treatment. A manual search was also performed. The search, studies selection, assessment of risk of bias and data collection were carried out by two independent reviewers. RESULTS: Eleven publications were included in this review (4 CCTs and 7 RCTs). No study presented low risk of bias. Different types of tooth movement were evaluated: lower anterior alignment, en-masse retraction, overall orthodontic treatment and canine distalization. A total of 240 participants were analyzed in the included studies. Seven studies found significant acceleration in the piezocision group, while two studies found no differences. Adverse effects regarding patient's satisfaction, pain perception, or worsening of periodontal parameters were not observed. There was no consensus concerning anchorage loss and root resorption. CONCLUSIONS: The literature does not provide high-quality evidence to confirm that Piezocision results in significant OTM acceleration. Therefore, high-quality RCTs should be conducted to allow reliable conclusions about the effects of piezocision in orthodontics. Key words:Piezosurgery, tooth movement techniques, orthodontics.

Long-term Stability of a Camouflage Retreatment of an Asymmetric Class III/Posterior Open Bite Using Sliding Jigs.

This article reports the camouflage retreatment of an adult patient presenting an asymmetric Class III malocclusion and posterior open bite. Sliding jigs (SJs) associated with intermaxillary elastics were used. The long-term stability of the excellent results suggests that the use of SJs to correct asymmetric posterior occlusions may be effective.

Effects of rapid maxillary expansion in cleft patients resulting from the use of two different expanders

ABSTRACT Objective: The aim of this study was to evaluate the skeletal and dental effects of rapid maxillary expansion (RME) in cleft patients using two types of expanders. Methods: Twenty unilateral cleft lip and palate patients were randomly divided into two groups, according to the type of expander used: (I) modified Hyrax and (II) inverted Mini-Hyrax. A pretreatment cone-beam computed tomographic image (T0) was taken as part of the initial orthodontic records and three months after RME, for bone graft planning (T1). Results: In general, there was no significant difference among groups (p > 0.05). Both showed a significant transverse maxillary expansion (p < 0.05) and no significant forward and/or downward movement of the maxilla (p > 0.05). There was greater dental crown than apical expansion. Maxillary posterior expansion tended to be larger than anterior opening (p < 0.05). Cleft and non-cleft sides were symmetrically expanded and there was no difference in dental tipping between both sides (p > 0.05). Conclusions: The appliances tested are effective in the transverse expansion of the maxilla. However, these appliances should be better indicated to cleft cases also presenting posterior transverse discrepancy, since there was greater expansion in the posterior maxillary region than in the anterior one.

RESUMO Objetivo: o objetivo deste estudo foi avaliar os efeitos esqueléticos e dentários da expansão rápida da maxila (ERM) em pacientes fissurados, utilizando dois tipos de disjuntores. Métodos: vinte pacientes com fissura labiopalatal unilateral foram aleatoriamente divididos em dois grupos, de acordo com o tipo de aparelho utilizado: (1) Hyrax modificado e (2) Mini-Hyrax invertido. Tomografias computadorizadas de feixe cônico foram obtidas antes do tratamento (T0), como parte da documentação ortodôntica inicial, e três meses após a ERM, para o planejamento de enxertia óssea (T1). Resultados: não houve diferença significativa entre os grupos (p>0,05). Ambos apresentaram significativa expansão transversal da maxila (p<0,05), sem significativa movimentação anterior e/ou inferior da maxila (p>0,05). Houve uma maior expansão transversal das coroas em relação à expansão nos ápices. A tendência observada foi uma maior expansão na região posterior da maxila, em comparação à anterior (p<0,05). Avaliando o deslocamento dos lados fissurado e não fissurado, a expansão ocorreu de maneira simétrica e não houve diferença na inclinação dentária entre os lados (p>0,05). Conclusões: os aparelhos testados são eficazes na expansão transversal da maxila em pacientes fissurados. Porém, esses aparelhos seriam melhor indicados para casos de fissura labiopalatal com atresia transversal posterior, uma vez que a expansão foi maior na região posterior da maxila do que na região anterior.

Effects of rapid maxillary expansion in cleft patients resulting from the use of two different expanders.

OBJECTIVE:: The aim of this study was to evaluate the skeletal and dental effects of rapid maxillary expansion (RME) in cleft patients using two types of expanders. METHODS:: Twenty unilateral cleft lip and palate patients were randomly divided into two groups, according to the type of expander used: (I) modified Hyrax and (II) inverted Mini-Hyrax. A pretreatment cone-beam computed tomographic image (T0) was taken as part of the initial orthodontic records and three months after RME, for bone graft planning (T1). RESULTS:: In general, there was no significant difference among groups (p > 0.05). Both showed a significant transverse maxillary expansion (p < 0.05) and no significant forward and/or downward movement of the maxilla (p > 0.05). There was greater dental crown than apical expansion. Maxillary posterior expansion tended to be larger than anterior opening (p < 0.05). Cleft and non-cleft sides were symmetrically expanded and there was no difference in dental tipping between both sides (p > 0.05). CONCLUSIONS:: The appliances tested are effective in the transverse expansion of the maxilla. However, these appliances should be better indicated to cleft cases also presenting posterior transverse discrepancy, since there was greater expansion in the posterior maxillary region than in the anterior one.

An alternative clinical approach to achieve greater anterior than posterior maxillary expansion in cleft lip and palate patients.

Cleft lip and palate patients commonly present maxillary constriction, particularly in the anterior region. The aim of this case report was to describe an alternative clinical approach that used a smaller Hyrax screw unconventionally positioned to achieve greater anterior than posterior expansion in patients with complete unilateral cleft lip and palate. The idea presented here is to take advantage of a reduced dimension screw to position it anteriorly. When only anterior expansion was needed (patient 1), the appliance was soldered to the first premolar bands and associated to a transpalatal arch cemented to the first molars. However, when overall expansion was required (patient 2), the screw was positioned anteriorly, but soldered to the first molar bands. Intercanine, premolar, and first molar widths were measured on dental casts with a digital caliper. Pre-expansion and postexpansion radiographs and tomographies were also evaluated. A significant anterior expansion and no intermolar width increase were registered in the first patient. Although patient 2 also presented a greater anterior than posterior expansion, a noteworthy expansion occurred at the molar region. The alternative approach to expand the maxilla in cleft patients reported here caused greater anterior than posterior expansion when the Mini-Hyrax was associated to a transpalatal arch, and its reduced dimension also minimized discomfort and facilitated hygiene.

Dentoskeletal effects of 3 maxillary expanders in patients with clefts: A cone-beam computed tomography study.

INTRODUCTION: The purpose of this study was to evaluate the skeletal and dental changes in the maxillae of patients with clefts treated with 3 expanders: hyrax, fan-type, and inverted mini-hyrax supported on the first premolars. METHODS: Thirty patients with unilateral cleft lip and palate with transverse maxillary deficiency were divided into 3 groups, according to the type of expander that they used. Cone-beam computed tomography images were taken before and 3 months after expansion, and the paired t test was used to evaluate the changes in each group. RESULTS: The subjects in the inverted mini-hyrax group showed significant forward displacement of the maxilla (P <0.05). On the transversal plane, the hyrax group showed greater expansion in the posterior region than in the anterior region (P <0.05). However, the fan-type and the inverted mini-hyrax groups showed significantly greater maxillary expansion anteriorly than posteriorly (P <0.05). There was a greater tendency for buccal inclination of the supporting teeth when the fan-type was used. The cleft and the noncleft sides expanded symmetrically with all appliances, and there was no difference in dental tipping between these sides (P >0.05). CONCLUSIONS: The hyrax expander showed better results for cleft patients requiring anterior and posterior maxillary expansion. The inverted mini-hyrax most effectively restricted posterior expansion, optimizing anterior expansion without causing as much buccal tipping of the supporting teeth as did the fan-type.

Disjuntor com cobertura oclusal: confecção laboratorial e aplicação clínica / Bonded expander: fabrication and clinical application

A expansão rápida da maxila é um procedimento rotineiramente utilizado para aumentar a dimensão transversa do arco superior. Diversos disjuntores já foram descritos para esta finalidade. Com o intuito de amenizar ou eliminar efeitos colaterais verticais de disjuntores bandados, foi desenvolvido o disjuntor com cobertura oclusal. Este artigo tem o objetivo de descrever uma técnica laboratorial que aperfeiçoa a confecção do disjuntor com cobertura oclusal, bem como ilustrar sua aplicação clínica na correção de severa deficiência transversa associada à dimensão vertical aumentada.

Rapid maxillary expansion is routinely used in Orthodontics to increase the transverse dimension of the maxillary arch. Different types of expanders have been described in the literature. The bonded expander was introduced as an attempt to minimize or eliminate the vertical side effects often registered with the traditional banded expanders. The purpose of this article is to describe a laboratory technique that facilitates the bonded expander fabrication and to illustrate its clinical application to correct a severe transverse maxillary deficiency associated with an increased vertical dimension.

Tratamento orto-cirúrgico de mordida aberta esquelética associada a múltiplas recessões periodontais e abfrações - relato de caso / Surgical-orthodontic treatment of a skeletal open bite associated with multiple periodontal recessions and abfractions - case report

O número de indivíduos adultos que vem procurando por tratamento ortodôntico nas últimas décadas é crescente. O tratamento desses pacientes, muitas vezes, apresenta dificuldades adicionais à má oclusão e, dentre as mais comuns, estão aquelas que envolvem problemas nos tecidos periodontais. Quando tais fatores estão associados à má oclusão severa, como a de etiologia esquelética, a correção ortodôntica torna-se ainda mais complexa. O objetivo do presente artigo é descrever uma abordagem interdisciplinar de uma paciente com mordida aberta esquelética e dentária severas, bem como comprometimento estético também derivado da presença de múltiplas recessões gengivais e abfrações, que resultou em importante ganho em estética facial e dentária, assim como em significativa melhora funcional.

The number of adults seeking for orthodontic treatment has consistently increased in the past decades. Treatment of these patients may be more challenging if the periodontal tissues exhibit limitations. When these factors are associated to severe skeletal malocclusions, the orthodontic treatment becomes even more complex. The purpose of the present study was to report an interdisciplinary approach implemented in the treatment of a patient with a severe skeletal open bite and a compromised aesthetic condition that was also derived from the presence of multiple periodontal recessions and abfractions, which resulted in a significant intra and extra-oral aesthetics improvement as well as in functional enhancement.

Interdisciplinary treatment of a class III patient with congenitally absent maxillary lateral incisors.

UNLABELLED: The purpose of this paper is to present a case report of an adult Class III patient presenting bilateral congenitally missing maxillary lateral incisors that compromised occlusal function as well as smile and facial esthetics. After the interdisciplinary diagnosis, spaces for prosthetic substitution were opened with the help of miniscrews. The orthodontic therapy achieved a better dental relationship, and the final interdisciplinary treatment results represented a significant improvement in function and both dental and facial esthetics. CLINICAL SIGNIFICANCE: The interdisciplinary treatment of orthodontics and restorative dentistry is very important because the two complement each other in search of the best for the patient. This case demonstrates very well that where orthodontics provided the best tooth position prior to implant placement and restorations.

Two-phase orthodontic treatment of a complex malocclusion: giving up efficiency in favor of effectiveness, quality of life, and functional rehabilitation?

The interceptive orthodontic treatment of patients with complex dentofacial abnormalities is frequently inefficient and produces less than ideal outcomes. Therefore, postponing therapy to a single-phase surgical-orthodontic approach might be considered a reasonable option. However, other relevant aspects of the patient's quality of life, such as possible psychosocial problems and functional impairments, should also be considered before deciding whether to intercept a severe dentofacial malocclusion while the patient is still growing, or wait and treat later. This case report describes the nonsurgical treatment of a young patient with a severe Class III open-bite malocclusion associated with a cervical cystic lymphangioma. Despite the poor interceptive therapy prognosis, a 2-phase approach was effective. A reflection about giving up efficiency in favor of effectiveness, functional rehabilitation, and the patient's quality of life is included.

Mechanical evaluation of orthodontic mini-implants of different lengths.

PURPOSE: The current study sought to evaluate the influence of the length of the mini-implant on its mechanical properties. MATERIALS AND METHODS: A total of 405 mini-implants from the same manufacturer were divided into 3 groups (n = 135) according to whether they were 6, 8, or 10 mm in length. An insertion torque test was performed using minipig osseous tissue of different cortical thicknesses (1 mm to 6 mm). To assess the maximum fracture torque during insertion, the mini-implants were inserted into swine femoral cortical bone. A digital torque gauge was positioned perpendicularly to the bone surface to measure this parameter. To evaluate the deformation and subsequent fracture due to a bending force, the mini-implants were subjected to loading orthogonal to their length at a speed of 0.5 mm per minute. RESULTS: The insertion torque increased with increasing screw length and increasing cortical bone thickness. There were no statistically significant differences between the different implant lengths with respect to the insertion torque force required for fracture (P > .05) or the forces required for deformation (P > .05) and fracture (P > .05) when submitted to flexion. CONCLUSIONS: Increasing the length of the screw does not increase its mechanical strength, but can efficiently reinforce the initial stability of mini-implants.

Mordida de Brodie: relato de caso / Brodie Bite: interceptive and corrective approach of a challenging malocclusion - case report

A mordida cruzada posterior completa por vestibular, conhecida como mordida de Brodie, é uma má oclusão rara e com indicação clara de abordagem interceptora. Entretanto, os desafios encontrados durante a terapia deste tipo de má oclusão são inúmeros, especialmente a elevada taxa de recidiva e as limitações mecânicas inerentes à expansão mandibular e contração maxilar. Este artigo apresenta um caso clínico que ilustra a abordagem interceptora e corretiva de uma mordida de Brodie, associada a uma má oclusão de Classe II, mordida profunda de uma criança de 7 anos de idade, com o objetivo de contribuir na terapia de casos semelhantes. Uma reflexão acerca da eficácia e eficiência da interceptação das mordidas cruzadas posteriores vestibulares é também apresentada

Posterior buccal cross bite, also called scissors bite or Brodie bite, is a rare malocclusion with clear indication of interceptive approach. However, several challenges are found during its treatment, specially the high relapse rate and the mechanical limitations of expanding mandibular arch and contracting maxillary arch. Therefore, this paper reports the orthodontic interceptive and corrective treatment of 7 year-old girl, with a Class II, deep bite, Brodie bite. A reflection about effectiveness and efficiency of such therapy was also presented.