1H-NMR studies on the volume phase transition of DNA-modified pNipmam microgels.

DNA functionalized pNipmam microgels, which have recently been introduced, are examined at different concentrations of sodium chloride and in PBS solutions via temperature dependent 1H-NMR measurements and are compared to pure pNipmam microgels. We show that the DNA modification shifts the volume phase transition temperature towards lower temperatures and the addition of salt and PBS further supports this effect in both materials. Thermodynamic values, i.e. enthalpy, entropy and Gibbs free energy, are determined via a non-linear fit which can be applied directly to the measurement data without further linearization.

DNA introduces an independent temperature responsiveness to thermosensitive microgels and enables switchable plasmon coupling as well as controlled uptake and release.

A novel DNA-microgel hybrid system with dual thermal responsiveness is introduced uitilizing covalent coupling of single stranded DNA (ssDNA) to thermoresponsive microgels (µGs). The spatial distribution of the coupling sites for the ssDNA was characterized with 3D superresolution fluorescence microscopy. The DNA-functionalized µGs remain thermoresponsive and can take up dye-labeled complementary ssDNA, which can be released again by overcoming the dehybridization temperature of the DNA independently of the volume phase transition (VPT) of the µGs. The same holds for nano-objects represented by plasmonic gold nanoparticles (AuNPs), the penetration depth of which was visualized via TEM tomography and 3D reconstruction and which show enhanced plasmonic coupling in the collapsed state of the µG and thus gets switchable. In contrast, if ssDNA was taken up just by non-specific interactions, i.e. into non-functionalized µGs, its release is temperature-independent and can only be induced by increasing the salt concentration. Thus, the incorporated ssDNA represents highly selectice binding sites determined by their base number and sequence, which makes the VPT, beeing determined by the µG composition, and the reversible uptake and release enabled through programmable DNA hybridization are independent features. The combination with the typically high biocompatibility and the retained swellability and permeability hold promise for new fundamental insights as well as for potential applications in biological environments.

Heterolepic ß-Ketoiminate Zinc Phenoxide Complexes as Efficient Catalysts for the Ring Opening Polymerization of Lactide.

Zinc phenoxide complexes L1ZnOAr 1-4 (L1=Me2NC2H4NC(Me)CHC(Me)O) and L2ZnOAr 5-8 (L2=Me2NC3H6NC(Me)CHC(Me)O) with donor-functionalized ß-ketoiminate ligands (L1/2) and OAr substituents (Ar=Ph 1, 5; 2,6-Me2-C6H3 2, 6; 3,5-Me2-C6H3 3, 7; 4-Bu-C6H4 4, 8) with tuneable electronic and steric properties were synthesized and characterized. 1-8 adopt binuclear structures in the solid state except for 5, while they are monomeric in CDCl3 solution. 1-8 are active catalysts for the ring opening polymerization (ROP) of lactide (LA) in CH2Cl2 at ambient temperature and the catalytic activity is controlled by the electronic and steric properties of the OAr substituent, yielding polymers with high average molecular weight (M n) and moderately controlled molecular weight distribution (MWDs). 1 and 5 showed a living polymerization character and kinetic studies on the ROP of L-LA with 1 and 5 proved first order dependencies on the monomer concentration. Homonuclear decoupled 1H-NMR analyses of polylactic acid (PLA) formed with rac-LA proved isotactic enrichment of the PLA microstructure.

Designed To React: Terminal Copper Nitrenes and Their Application in Catalytic C-H Aminations.

Heteroscorpionate ligands of the bis(pyrazolyl)methane family have been applied in the stabilisation of terminal copper tosyl nitrenes. These species are highly active intermediates in the copper-catalysed direct C-H amination and nitrene transfer. Novel perfluoroalkyl-pyrazolyl- and pyridinyl-containing ligands were synthesized to coordinate to a reactive copper nitrene centre. Four distinct copper tosyl nitrenes were prepared at low temperatures by the reaction with SO2 tBuPhINTs and copper(I) acetonitrile complexes. Their stoichiometric reactivity has been elucidated regarding the imination of phosphines and the aziridination of styrenes. The formation and thermal decay of the copper nitrenes were investigated by UV/Vis spectroscopy of the highly coloured species. Additionally, the compounds were studied by cryo-UHR-ESI mass spectrometry and DFT calculations. In addition, a mild catalytic procedure has been developed where the copper nitrene precursors enable the C-H amination of cyclohexane and toluene and the aziridination of styrenes.

Derivatization of antibody Fab fragments: a designer enzyme for native protein modification.

Bioconjugates, such as antibody-drug conjugates, have gained recent attention because of their increasing use in therapeutic and diagnostic applications. Commonly used conjugation reactions based upon chemoselective reagents exhibit a number of drawbacks: most of these reactions lack regio- and stereospecificity, thus resulting in loss of protein functionality due to random modifications. Enzymes provide an obvious solution to this problem, but the intrinsic (natural) substrate specificities of existing enzymes pose severe limitations to the kind of modifications that can be introduced. Here we describe the application of the novel trypsin variant trypsiligase for site-specific modification of the C terminus of a Fab antibody fragment via a stable peptide bond. The suitability of this designed biocatalyst was demonstrated by coupling the Her2-specific Fab to artificial functionalities of either therapeutic (PEG) or diagnostic (fluorescein) relevance. In both cases we obtained homogeneously modified Fab products bearing the artificial functionality exclusively at the desired position.

Quantification of vancomycin in human serum by LC-MS/MS.

BACKGROUND: The aim of our work was to develop and validate a reliable LC-MS/MS-based measurement procedure for the quantification of vancomycin in serum, to be applied in the context of efforts to standardize and harmonize therapeutic drug monitoring of this compound using routine assays. METHODS: Sample preparation was based on protein precipitation followed by ultrafiltration. In order to minimize differential modulation of ionization by matrix constituents extended chromatographic separation was applied leading to a retention time of 9.8 min for the analyte. Measurement was done by HPLC-ESI-MS/MS. For internal standardization the derivative vancomycin-glycin (ISTD) prepared by chemical synthesis was used, HPLC conditions ensured coelution of ISTD with the analyte. RESULTS: In a bi-center validation total CVs of <4% were observed for quality control material ranging from 5.3 mg/L to 79.4 mg/L; accuracy was ±4%. No relevant ion suppression was observed. Comparative measurement of aliquots from 70 samples at the two validation sites demonstrated close agreement. CONCLUSIONS: Employing a closely related homologue molecule for internal standardization and the use of MS/MS following highly efficient sample pre-fractionation by HPLC, the method described here can be considered to offer the highest level of analytical reliability realized so far for the quantification of vancomycin in human serum. Thus, the method is suitable to be used in a comprehensive reference measurement system for vancomycin.

Hartmann-Hahn 2D-map to optimize the RAMP-CPMAS NMR experiment for pharmaceutical materials.

Cross polarization-magic angle spinning (CPMAS) is the most used experiment for solid-state NMR measurements in the pharmaceutical industry, with the well-known variant RAMP-CPMAS its dominant implementation. The experimental work presented in this contribution focuses on the entangled effects of the main parameters of such an experiment. The shape of the RAMP-CP pulse has been considered as well as the contact time duration, and a particular attention also has been devoted to the radio-frequency (RF) field inhomogeneity. (13)C CPMAS NMR spectra have been recorded with a systematic variation of (13)C and (1)H constant radiofrequency field pair values and represented as a Hartmann-Hahn matching two-dimensional map. Such a map yields a rational overview of the intricate optimal conditions necessary to achieve an efficient CP magnetization transfer. The map also highlights the effects of sweeping the RF by the RAMP-CP pulse on the number of Hartmann-Hahn matches crossed and how RF field inhomogeneity helps in increasing the CP efficiency by using a larger fraction of the sample. In the light of the results, strategies for optimal RAMP-CPMAS measurements are suggested, which lead to a much higher efficiency than constant amplitude CP experiment.

Flip-back, an old trick to face highly contrasted relaxation times: application in the characterization of pharmaceutical mixtures by CPMAS NMR.

The (13)C-(1)H CPMAS with flip-back pulse NMR experiment is revisited in view of applications to pharmaceutical mixtures. The analysis of the kinetics of relaxation and CP transfer with and without the flip-back pulse shows that a significant gain in (13)C signal can be expected (thus in experimental time) from the flip-back pulse for protons with long T(1). The gain is of the order of T(1) of the protons expressed in seconds. The experiment is applied on samples with highly contrasted spin-lattice relaxation times T(1) for protons, situation encountered in pharmaceutical mixtures. The application of the flip-back increases significantly the relative signal intensity of the component with the longer T(1), making this component detectable even after using short recycle delays. Therefore, this CPMAS with flip-back experiment could be used routinely to get (13)C CPMAS NMR spectra of mixtures in constant experimental time and signal-to-noise ratio without the need for optimization of the recycle delays, and for whatever may be the degree of crystallinity of the active principal ingredient (API) and/or excipients.

Low-temperature alkane C-H bond activation by zeolites: an in situ solid-state NMR H/D exchange study for a carbenium concerto.

Isotopic H/D exchange has been monitored by in situ MAS NMR spectroscopy of 2-[D(14)]methylpentane with H-USY to probe the controversy over the alkane conversion mechanism. The probe molecule has distinct exchangeable sites with different accessibility to the zeolite surface. In the early stages of the process, the regioselectivity of exchange demonstrates that the slow step of the mechanism is controlled by a carbenium ion intermediate. At a later stage of exchange, intramolecular hydride migrations, typical of carbenium chemistry, replace D by H also on other carbon atoms, resulting in a loss of regioselectivity. Therefore, the first and the subsequent steps of the H/D exchange proceed at this temperature through a carbenium intermediate species.

Double-quantum homonuclear correlation magic angle sample spinning nuclear magnetic resonance spectroscopy of dipolar-coupled quadrupolar nuclei.

A double-quantum homonuclear correlation nuclear magnetic resonance experiment for dipolar-coupled half-integer quadrupolar nuclei in solids is presented. The experiment is based on rotary resonance dipolar recoupling and uses bracketed spin-lock pulses to excite double-quantum coherence and later to convert it to the zero-quantum one. A central-transition-selective pi pulse at the beginning of the t1 evolution period differentiates coherence transfer pathways of double-quantum coherences arising from coupled spins and from a single spin, so that the latter can be efficiently filtered out by phase cycling. The experiment was tested on an aluminophosphate molecular sieve AlPO4-14, a material with a variety of aluminum quadrupolar coupling constants, isotropic chemical shifts and homonuclear distances. In a two-dimensional spectrum aluminum dipolar couplings with internuclear distances between 2.9 and 5.5 A were resolved. Although the experiment requires an application of weak radio-frequency fields, frequency offsets did not affect its performance crucially.

Fabrication of magnetically separable mesostructured silica with an open pore system.

Magnetically separable mesostructured silica with an unobstructed pore system was fabricated through the deposition of cobalt nanoparticles on the outer surface of the submicron-sized silica particles. These cobalt nanoparticles were further protected by a nanometer-thick carbon shell against acid erosion. Due to the fact that the magnetic particles are grafted on the outer surface of the porous silica, the pores are still accessible for further modification, which could widen the application range of porous silica.

A rationale for the large breathing of the porous aluminum terephthalate (MIL-53) upon hydration.

Aluminum 1,4-benzenedicarboxylate Al(OH)[O(2)C-C(6)H(4)-CO(2)]. [HO(2)C-C(6)H(4)-CO(2)H](0.70) or MIL-53 as (Al) has been hydrothermally synthesized by heating a mixture of aluminum nitrate, 1,4-benzenedicarboxylic acid, and water, for three days at 220 degrees C. Its 3 D framework is built up of infinite trans chains of corner-sharing AlO(4)(OH)(2) octahedra. The chains are interconnected by the 1,4-benzenedicarboxylate groups, creating 1 D rhombic-shaped tunnels. Disordered 1,4-benzenedicarboxylic acid molecules are trapped inside these tunnels. Their evacuation upon heating, between 275 and 420 degrees C, leads to a nanoporous open-framework (MIL-53 ht (Al) or Al(OH)[O(2)C-C(6)H(4)-CO(2)]) with empty pores of diameter 8.5 A. This solid exhibits a Langmuir surface area of 1590(1) m(2)g(-1) together with a remarkable thermal stability, since it starts to decompose only at 500 degrees C. At room temperature, the solid reversibly absorbs water in its tunnels, causing a very large breathing effect and shrinkage of the pores. Analysis of the hydration process by solid-state NMR ((1)H, (13)C, (27)Al) has clearly indicated that the trapped water molecules interact with the carboxylate groups through hydrogen bonds, but do not affect the hydroxyl species bridging the aluminum atoms. The hydrogen bonds between water and the oxygen atoms of the framework are responsible for the contraction of the rhombic channels. The structures of the three forms have been determined by means of powder X-ray diffraction analysis. Crystal data for MIL-53 as (Al) are as follows: orthorhombic system, Pnma (no. 62), a = 17.129(2), b = 6.628(1), c = 12.182(1) A; for MIL-53 ht (Al), orthorhombic system, Imma (no. 74), a = 6.608(1), b = 16.675(3), c = 12.813(2) A; for MIL-53 lt (Al), monoclinic system, Cc (no. 9), a = 19.513(2), b = 7.612(1), c = 6.576(1) A, beta = 104.24(1) degrees.

2-phosphanylphenolate nickel catalysts for the polymerization of ethylene.

The previously unknown methallylnickel 2-diorganophosphanylphenolates (R=Ph, cHex) were synthesized and found to catalyze the polymerization of ethylene. To explore the potential for ligand-tuning, a variety of P-alkyl- and P-phenyl-2-phosphanylphenols was synthesized and allowed to react with [Ni(cod)(2)] (cod=1,5-cyclooctadiene) or with NiBr(2).DME and NaH. The complexes formed in situ with [Ni(cod)(2)] are generally active as ethylene polymerization catalysts with all the ligands tested, whereas the latter systems are inactive when 2-dialkylphosphanylphenols are applied. M(w) values, ranging from about 1000 to about 100000 g mol(-1), increase for various R(2)P groups in the order R=Ph