An Air-Stable Storage Compound for White Phosphorus: Reversible Addition to a Stannylene and Chemical Release of P4.

Controlled insertion into a single P-P bond of white phosphorus (P4) was achieved by employing a diaryl stabilized stannylene, Ar*2Sn (Ar*=2,6-bis(benzhydryl)-4-iPr-phenyl). Conversions of the stannylene with P4 gave a non-pyrophoric, air-stable storage compound, which releases P4 quantitively upon irradiation with light (354 or 455 nm). Alternatively, the phosphorus cage is detached by reacting the storage compound with PhChChPh (Ch=Se, Te). Despite the recent advances in the directed conversion of P4 using main group element compounds, Ar*2Sn constitutes only the second structurally characterized example of a stannylene capable of performing controlled, reversible addition and release of white phosphorus.

Wavelength-dependent rearrangements of an α-dione chromophore: a chemical pearl in a bis(hypersilyl) oyster.

The symmetric bissilyl-dione 3 reveals two well-separated n → π* absorption bands at λmax = 637 nm (ε = 140 mol-1 dm3 cm-1) and 317 nm (ε = 2460 mol-1 dm3 cm-1). Whereas excitation of 3 at λ = 360/365 nm affords an isolable siloxyketene 4 in excellent yields, irradiation at λ = 590/630 nm leads to the stereo-selective and quantitative formation of the siloxyrane 5. These remarkable wavelength-dependent rearrangements are based on the electronic and steric properties provided by the hypersilyl groups. While the siloxyketene 4 is formed via a hitherto unknown 1,3-hypersilyl migration via the population of a second excited singlet state (S2, λmax = 317 nm, a rare case of anti-Kasha reactivity), the siloxyrane 5 emerges from the first excited triplet state (T1via S1λmax = 637 nm). These distinct reaction pathways can be traced back to specific energy differences between the S2, S1 and T1, an electronic consequence of the bissilyl substited α-dione (the "pearl"). The hypersilyl groups act as protective ''oyster shell", which are responsible for the clean formation of 4 and 5 basically omitting side products. We describe novel synthetic pathways to achieve hypersilyl substitution (3) and report an in-depth investigation of the photorearrangements of 3 using UV/vis, in situ IR, NMR spectroscopy and theoretical calculations.

Symmetrical and Mixed Tris(acyl)phosphines: Synthesis, Oxidation and Photochemistry.

Invited for the cover of this issue are the groups of M. Haas, G. Gescheidt and H. Grützmacher from the Graz University of Technology and the ETH Zürich. The image depicts a phosphorus mine, where the workers are acid chlorides using their shovels and red phosphorus to provide the chemicals necessary to produce novel reagents. Read the full text of the article at 10.1002/chem.202302535.

To Bond or Not to Bond: Metal-Metal Interaction in Heterobimetallic Rare-Earth Metal-Silver Complexes.

The reaction of 2,4-tBu2-6-(PPh2)PhOH (HOArP) with silver(I) triflate in a 3:1 molar ratio gave the mononuclear coinage metal complex (HOArP-κP)3AgIOTf (1). Treatment of HOArP with LnIII[N(SiMe3)2]3 (Ln = La, Sm, Y, Yb) in a 3:1 molar ratio yielded the mononuclear rare-earth metal complexes LnIII(OArP-κ2O,P)3 (2-Ln). The heterobimetallic rare-earth metal-silver complexes LnIII(OTf)(µ-OArP-1κ1O,2κ1P)3AgI (3-Ln) were prepared from monometallic precursors by reactions of equimolar amounts of 1 with LnIII[N(SiMe3)2]3 or 2-Ln with silver(I) triflate, respectively. The compounds were characterized by NMR, ultraviolet-visible (UV-vis), and infrared (IR) spectroscopy, single-crystal X-ray diffraction, elemental analysis, and the effective magnetic moments of the paramagnetic complexes were determined via the Evans NMR method. Computational studies were conducted on 3-La and 3-Y.

Fabrication of Amorphous Silicon-Carbon Hybrid Films Using Single-Source Precursors.

The aim of this study was the preparation of different amorphous silicon-carbon hybrid thin-layer materials according to the liquid phase deposition (LPD) process using single-source precursors. In our study, 2-methyl-2-silyltrisilane (methylisotetrasilane; 2), 1,1,1-trimethyl-2,2-disilyltrisilane (trimethylsilylisotetrasilane; 3), 2-phenyl-2-silyltrisilane (phenylisotetrasilane; 4), and 1,1,2,2,4,4,5,5-octamethyl-3,3,6,6-tetrasilylcyclohexasilane (cyclohexasilane; 5) were utilized as precursor materials and compared with the parent compound 2,2-disilyltrisilane (neopentasilane; 1). Compounds 2-5 were successfully oligomerized at λ = 365 nm with catalytic amounts of the neopentasilane oligomer (NPO). These oligomeric mixtures (NPO and 6-9) were used for the preparation of thin-layer materials. Optimum solution and spin coating conditions were investigated, and amorphous silicon-carbon films were obtained. All thin-layer materials were characterized via UV/vis spectroscopy, light microscopy, spectroscopic ellipsometry, XPS, SEM, and SEM/EDX. Our results show that the carbon content and especially the bandgap can be easily tuned using these single-source precursors via LPD.

Symmetrical and Mixed Tris(acyl)phosphines: Synthesis, Oxidation and Photochemistry.

Herein, we present a convenient synthesis for symmetrical and mixed substituted tris(acyl)phosphines (TAPs) starting from red phosphorus. All TAPs exhibit a phosphaalkene-acylphosphine equilibrium, which was investigated in detail by variable-temperature (VT) NMR spectroscopy supported by density-functional theory (DFT) calculations. Depending on the substituents, two phosphaalkene derivatives and ten acylphosphine derivatives could be isolated. NMR spectroscopy and single-crystal X-ray crystallography enabled a clear structural assignment of these compounds. Oxidation of selected TAPs led to the formation of the corresponding tris(acyl)phosphine oxides (TAPOs). Furthermore, their spectroscopic properties as well as their photochemistry was investigated. Especially, the TAPO compounds were evaluated for their suitability as photoinitiators by CIDNP spectroscopy, photobleaching measurements and by storage stability tests.

Silicon- and Germanium-Functionalized Perylene Diimides: Synthesis, Optoelectronic Properties, and Their Application as Non-fullerene Acceptors in Organic Solar Cells.

Organic solar cells have been continuously studied and developed through the last decades. A major step in their development was the introduction of fused-ring non-fullerene electron acceptors. Yet, beside their high efficiency, they suffer from complex synthesis and stability issues. Perylene-based non-fullerene acceptors, in contrast, can be prepared in only a few steps and display good photochemical and thermal stability. Herein, we introduce four monomeric perylene diimide acceptors obtained in a three-step synthesis. In these molecules, the semimetals silicon and germanium were added in the bay position, on one or both sides of the molecules, resulting in asymmetric and symmetric compounds with a red-shifted absorption compared to unsubstituted perylene diimide. Introducing two germanium atoms improved the crystallinity and charge carrier mobility in the blend with the conjugated polymer PM6. In addition, charge carrier separation is significantly influenced by the high crystallinity of this blend, as shown by transient absorption spectroscopy. As a result, the solar cells reached a power conversion efficiency of 5.38 %, which is one of the highest efficiencies of monomeric perylene diimide-based solar cells recorded to date.

Surface-Initiated Polymerizations Mediated by Novel Germanium-Based Photoinitiators.

Since surface-initiated photopolymerization techniques have gained increasing interest within the last decades, the coupling of photoinitiators to surfaces and particles has become an important research topic in material and surface sciences. In terms of surface modification and functionalization, covalently coupled photoinitiators and subsequent photopolymerizations are employed to provide a huge variety of surface properties, such as wettability, stimulus responsive features, antifouling behavior, protein binding, friction control, drug delivery, and many more. For this purpose, numerous type I and type II photoinitiators or other photosensitive moieties have been attached to different substrates so far. In our studies, a convenient and straightforward synthetic protocol to prepare a novel germanium-based photoinitiator (bromo-tris(2,4,6-trimethylbenzoyl)germane) in good yields was developed. The immobilization of this photoinitiator at the surface of silicon wafers and quartz plates was evidenced by X-ray photoelectron spectroscopy (XPS). Employing visible-light-triggered surface-initiated polymerization of different functional monomers, including acrylamide, perfluorodecyl acrylate, and fluorescein-o-acrylate, surfaces with various features such as hydrophilic/hydrophobic and fluorescent properties were prepared. This was also achieved in a spatially resolved manner. The polymer layers were characterized by contact angle measurements, UV-vis/fluorescence spectroscopy, spectroscopic ellipsometry, and XPS. The thicknesses of the surface grafted polymer layers ranged between 10 and 126 nm.

Magnetostructural Properties of Some Doubly-Bridged Phenoxido Copper(II) Complexes.

Three new tripod tetradentate phenolate-amines (H2L1, H2L4 and H2L9), together with seven more already related published ligands, were synthesized, and characterized. With these ligands, two new dinuclear doubly-bridged-phenoxido copper(II) complexes (3, 4), and six more complexes (1, 2, 5-8), a new trinuclear complex (9) with an alternative doubly-bridged-phenoxido and -methoxido, as well as the 1D polymer (10) were synthesized, and their molecular structures were characterized by spectroscopic methods and X-ray single crystal crystallography. The Cu(II) centers in these complexes exhibit distorted square-pyramidal arrangement in 1-4, mixed square pyramidal and square planar in 5, 6, and 9, and distorted octahedral (5+1) arrangements in 7 and 8. The temperature dependence magnetic susceptibility study over the temperature range 2-300 K revealed moderate-relatively strong antiferromagnetic coupling (AF) (|J| = 289-145 cm-1) in complexes 1-6, weak-moderate AF (|J| = 59 cm-1) in the trinuclear complex 9, but weak AF interactions (|J| = 3.6 & 4.6 cm-1) were obtained in 7 and 8. No correlation was found between the exchange coupling J and the geometrical structural parameters of the four-membered Cu2O2 rings.

Dinuclear doubly bridged phenoxido copper(II) complexes as efficient anticancer agents.

Two cationic [Cu2(L1-2)2](ClO4)2 (1, 2), and four neutral doubly bridged-phenoxido-copper(II) complexes [Cu2(L3-4)2] (3, 4) and [Cu2(L5-6)2(H2O)]‧2H2O (5, 6) as well as 1D polymeric catena-[Cu(L7)] (7), where HL1-2 and H2L3-7 represent tripodal tetradentate pyridyl or aliphatic-amino groups based 2,4-disubstituted phenolates, were synthesized and thoroughly characterized by various spectroscopic methods and single crystal X-ray analysis. The molecular structures of the complexes exhibited diverse geometrical environments around the central Cu(II) atoms. The in vitro antiproliferative activity of the isolated complexes and selected parent free ligands were screened against some human cancer cell lines (A2780, A2780R, PC-3, 22Rv1, MCF-7). The most promising cytotoxicity against cancer cells were obtained for 1-6, while complex 6 was found as the best performing as compared to the reference drug cisplatin. The cytotoxicity study of complex 6 was therefore extended to wider variety of cancer cell lines (HOS, A549, PANC-1, CaCo2, HeLa) and results revealed its significant cytotoxicity on all investigated human cancer cells. The cell uptake study showed that cytotoxicity of 6 (3 µM concentration and 24 h of incubation) against A2780 cells was almost independent from the intracellular levels of copper. The effect of complexes 4, 6 and 7 on cell cycle of A2780 cells indicates that the mechanism of action in these complexes is not only different from that of cisplatin but also different among them. Complex 7 was able to induce apoptosis in A2780 cells, while complexes 4 and 6 did not and on the other hand, they showed considerable effect on autophagy induction and there are some clues that these complexes were able to induce cuproptosis in A2780 cells.

Identification and characterization of selected silyl substituted silyl anions by liquid injection field desorption ionization mass spectrometry.

Silyl anions are crucial building blocks in silicon chemistry and are frequently used in organosilicon chemistry. These so-called silanides are negatively charged three-coordinate species, isoelectronic to carbanions. In this contribution, we synthesized already literature known and unknown anionic silicon species. Here we focused on silyl substituted silyl anions with different substituted silicon atoms like hydrogen, methyl, and methoxy groups. Furthermore, we investigated these species with liquid injection field desorption ionization mass spectrometry.

Synthesis and Characterization of a Variety of α,ω-Bisacylpolysilanes-A Study on Reactivity and Accessibility.

In this study, a variety of α,ω-bisacylpolysilanes were synthesized via two synthetic protocols. The first method for obtaining these compounds is based on the substitution reaction of bromine either on silica gel or by the use of silver salts. Surprisingly, instead of the expected bromine substitution product PhC(O)(SiMe2)2C(O)Ph 4a, we found the formation of the diastereomer PhC(O)(SiMe2)2CBrPhOCBrPh(SiMe2)2C(O)Ph 4b indicating a more complex reaction cascade. On the other hand, the phenylated compound 3b yielded the expected bromine substitution product PhC(O)(SiPh2)2C(O)Ph 4c. For the second protocol, we utilized the Corey-Seebach approach to isolate other representatives of this compound class. We found that the substituents at the α-silicon atoms influence the selectivity of the dethioketalization. While the ethylated and phenylated disilanes 5b,c yield the expected bisacyldisilanes 6a,b, the methylated disilane 4a undergoes a BF3-induced Si-Si bond breakage followed by an intermolecular sila-aldol reaction. This hitherto unknown sila-aldol reaction results in the formation of the enantiomer PhC(O)SiMe2C(OMe)PhSiMe2F 6c in excellent yields. All isolated compounds were analyzed by a combination of NMR spectroscopy, ultraviolet-visible (UV-vis) spectroscopy, single-crystal X-ray crystallography, and mass spectrometry. Furthermore, the photochemical pathways of two representative examples (4b,c) were examined.

Synthesis and Characterization of Methoxylated Oligosilyl Group 4 Metallocenes.

New methoxylated oligosilyl-substituted metallocenes were synthesized by the reaction of two oligosilanides with different metallocene dichlorides (M = Ti, Zr, and Hf). The first investigated tris(trimethoxysilyl)silanide [(MeO)3Si]3SiK (1) underwent a selective monosubstitution to the respective oligosilyl-decorated metallocenes [(MeO)3Si]3SiMClCp2 (2-4). Surprisingly, the attempted disilylation with this silanide was not possible. However, in the case of titanocene dichloride, a stable radical [(MeO)3Si]3SiTiCp2 (5) was formed. The unsuccessful isolation of bisilylated metallocenes encouraged us to investigate the reactivity of another silanide. Therefore, we synthesized a hitherto unknown disilanide K[(MeO)3Si]2Si(SiMe2)2Si[(MeO)3Si]2K (8), which was accessible in good yields. The reaction of compound 8 and different metallocene dichlorides (M = Ti, Zr, and Hf) gave rise to the formation of heterocyclic compounds 9-11 in good yields.

Synthesis and Characterization of New Counterion-Substituted Triacylgermenolates and Investigation of Selected Metal-Metal Exchange Reactions.

The synthetic process to obtain triacylgermenolates with alternated counterions by single-electron-transfer reactions or by a direct approach is described. The formation of these derivatives was confirmed by NMR spectroscopy and UV-vis spectroscopy. Moreover, metal-metal exchange reactions of potassium-substituted triacylgermenolate 2a with MgBr2, ZnCl2, and HgCl2 are presented. Additionally, 2a was reacted with nBu4NBr, which led to the formation of ammonia-substituted triacylgermenolate 8. Furthermore, we reacted 2a with HCl/Et2O to obtain triacylgermane 9. Subsequently, we investigated the reaction of 9 with tBu2Zn and tBu2Hg. NMR spectroscopy, single-crystal X-ray crystallography, and UV-vis spectroscopy are employed for analysis of structural properties.

Insights into the Spin Dynamics of Mononuclear Cerium(III) Single-Molecule Magnets.

Four novel CeIII mononuclear complexes of formulas [Ce(ntfa)3(MeOH)2] (1), [Ce(ntfa)3(5,5'-Me2bipy)] (2), [Ce(ntfa)3(terpy)] (3), and [Ce(ntfa)3(bipy)2] (4), where ntfa = 4,4,4-trifluoro-1-(naphthalen-2-yl)butane-1,3-dionato, 5,5'-Me2bipy = 5,5'-dimethyl-2,2'-dipyridyl, terpy = 2,2':6',2″-terpyridine, and bipy = 2,2'-bipyridine, have been synthesized and structurally characterized with CeIII displaying coordination numbers of 8, 8, 9, and 10, respectively. Magnetic measurements indicate that all the complexes show a field-induced single-ion magnet behavior under a small applied dc field. The magnetic analysis shows the relevance of the different spin relaxation mechanisms in the magnetic relaxation of the CeIII compounds, with special emphasis on the local-mode process. Multiconfigurational calculations were also performed to get more information on the axiality of the compounds.

An NHC-Mediated Metal-Free Approach towards an NHC-Coordinated Endocyclic Disilene.

A convenient metal-free approach towards an N-heterocyclic carbene (NHC)-coordinated disilene 2 is described. Compound 2, featuring the disilene incorporated in cyclopolysilane framework, was obtained in good yield and characterized using NMR spectroscopy and X-ray crystallography. Density functional theory (DFT) calculations of the reaction mechanism provide a rationale for the observed reactivity and give detailed information on the bonding situation of the base-stabilized disilene. Compound 2 undergoes thermal or light- induced (λ=456 nm) NHC loss, and a dimerization process to give a corresponding dimer with a Si10 skeleton. In order to shed light on the dimerization mechanism, DFT calculations were performed. Moreover, the reactivity of 2 was examined with selected examples of transition metal carbonyl compounds.

Correction: Synthesis and characterization of diacylgermanes: persistent derivatives with superior photoreactivity.

Correction for 'Synthesis and characterization of diacylgermanes: persistent derivatives with superior photoreactivity' by Sabrina D. Püschmann et al., Dalton Trans., 2021, 50, 11965-11974, DOI: 10.1039/D1DT02091A.

Magnetic and Luminescence Properties of 8-Coordinate Holmium(III) Complexes Containing 4,4,4-Trifluoro-1-Phenyl- and 1-(Naphthalen-2-yl)-1,3-Butanedionates.

A new series of mononuclear Ho3+ complexes derived from the ß-diketonate anions: 4,4,4-trifluoro-1-phenyl-1,3-butanedioneate (btfa-) and 4,4,4-trifuoro-1-(naphthalen-2-yl)-1,3-butanedionate (ntfa-) have been synthesized, [Ho(btfa)3(H2O)2] (1a), [Ho(ntfa)3(MeOH)2] (1b), (1), [Ho(btfa)3(phen)] (2), [Ho(btfa)3(bipy)] (3), [Ho(btfa)3(di-tbubipy)] (4), [Ho(ntfa)3(Me2bipy)] (5), and [Ho(ntfa)3(bipy)] (6), where phen is 1,10-phenantroline, bipy is 2,2'-bipyridyl, di-tbubipy is 4,4'-di-tert-butyl-2,2'-bipyridyl, and Me2bipy is 4,4'-dimethyl-2,2'-bipyridyl. These compounds have been characterized by elemental microanalysis and infrared spectroscopy as well as single-crystal X-ray difraction for 2-6. The central Ho3+ ions in these compounds display coordination number 8. The luminescence-emission properties of the pyridyl adducts 2-6 display a strong characteristic band in the visible region at 661 nm and a series of bands in the NIR region (excitation wavelengths (λex) of 367 nm for 2-4 and 380 nm for 5 and 6). The magnetic properties of the complexes revealed magnetically uncoupled Ho3+ compounds with no field-induced, single-molecule magnet (SMMs).

Phenylene-Bridged Perylene Monoimides as Acceptors for Organic Solar Cells: A Study on the Structure-Property Relationship.

A series of non-fullerene acceptors based on perylene monoimides coupled in the peri position through phenylene linkers were synthesized via Suzuki-coupling reactions. Various substitution patterns were investigated using density functional theory (DFT) calculations in combination with experimental data to elucidate the geometry and their optical and electrochemical properties. Further investigations of the bulk properties with grazing incidence wide angle X-ray scattering (GIWAXS) gave insight into the stacking behavior of the acceptor thin films. Electrochemical and morphological properties correlate with the photovoltaic performance of devices with the polymeric donor PBDB-T and a maximum efficiency of 3.17 % was reached. The study gives detailed information about structure-property relationships of perylene-linker-perylene compounds.

Phosphinoindenyl and phosphazidoindenyl complexes of lanthanum and samarium: synthesis, characterisation, and hydroamination catalysis.

The phosphinoindenyl rare-earth metal complexes [1-(Ph2P)-η5-C9H6]2LnIIIN(SiMe3)2, Ln = La (1-La), Sm (1-Sm), were prepared by heating two equivalents of 1-(Ph2P)C9H7 with LnIII[N(SiMe3)2]3 in toluene at 100 °C. The treatment of 1-La with one equivalent of benzonitrile gave (PhCN)[1-(Ph2P)-η5-C9H6]2LaIIIN(SiMe3)2, 2, while no adduct was formed in case of the samarium derivative 1-Sm. The reaction of 1-La and 1-Sm with two equivalents of benzyl azide yielded the (phosphazido)indenyl complexes {1-[BnN3-κN(Ph2)P]-η5-C9H6}{1-[BnN3-κ2N,N'(Ph2)P]C9H6}LnIIIN(SiMe3)2, Ln = La (3-La), Sm (3-Sm), respectively. The five complexes catalyse the intramolecular hydroamination/cyclisation of 2,2-diphenylpent-4-ene-1-amine using 2% catalyst loading. All compounds were characterised by NMR and UV-Vis spectroscopy, single-crystal X-ray diffraction, and elemental analysis and DFT calculations were performed for 3-La.