Advances in the Formulation and Assembly of Non-Cationic Lipid Nanoparticles for the Medical Application of Gene Therapeutics.

Lipid nanoparticles have become increasingly popular delivery platforms in the field of gene therapy, but bench-to-bedside success has been limited. Many liposomal gene vectors are comprised of synthetic cationic lipids, which are associated with lipid-induced cytotoxicity and immunogenicity. Natural, non-cationic PEGylated liposomes (PLPs) demonstrate favorable biocompatibility profiles but are not considered viable gene delivery vehicles due to inefficient nucleic acid loading and reduced cellular uptake. PLPs can be modified with cell-penetrating peptides (CPPs) to enhance the intracellular delivery of liposomal cargo but encapsulate leakage upon CPP-PLP assembly is problematic. Here, we aimed to identify parameters that overcome these performance barriers by incorporating nucleic acid condensers during CPP-PLP assembly and screening variable ethanol injection parameters for optimization. CPP-PLPs were formed with R8-amphiphiles via pre-insertion, post-insertion and post-conjugation techniques and liposomes were characterized for size, surface charge, homogeneity, siRNA encapsulation efficiency and retention and cell associative properties. Herein we demonstrate that pre-insertion of stearylated R8 into PLPs is an efficient method to produce non-cationic CPP-PLPs and we provide additional assembly parameter specifications for a modified ethanol injection technique that is optimized for siRNA encapsulation/retention and enhanced cell association. This assembly technique could provide improved clinical translation of liposomal based gene therapy applications.

Cell mimetic liposomal nanocarriers for tailored delivery of vascular therapeutics.

Liposomal delivery systems (LDSs) have been at the forefront of medicinal nanotechnology for over three decades. Increasing LDS association to target cells and cargo delivery is crucial to bolstering overall nanodrug efficacy. Our laboratory aims to develop LDSs for molecular therapeutics aimed at vascular pathology. We have previously established a liposome platform that is an effective delivery system for RNA interference in vascular cell types by using polyethylene glycol (PEG) decorated liposomes bearing an octa-arginine (R8) cell penetrating peptide (CPP). Further tailoring liposome membranes to mimic vascular cell membrane lipid constituents may be a promising strategy for increasing cargo delivery. Here we aimed to develop liposomal formulations that could make use of diacylglycerol (DAG) and phosphatidylserine (PS), naturally occurring lipid species that are known to influence vascular cell function, as a facile and efficient means to increase nanodrug efficacy without compromising clinical viability. We investigated the ability of DAG and PS to amplify the cellular uptake of our previously established LDS platform loaded with small interfering ribonucleic acid (siRNA) cargo. Cellular fluorescence microscopy experiments were performed in conjunction with quantitative cell association assays and cytotoxicity assays to analyze the effect of DAG/PS on the differential delivery of fluorescently-tagged liposomes to vascular smooth muscle cells (VSMCs) and vascular endothelial cells (VECs) and on liposomal-mediated toxicity. In these studies, significant, dose-dependent increases in association to target cells were observed, as well as cell-type specific effects on cell viability. The stability and encapsulation-efficiency of the DAG/PS-modified LDSs were analyzed by standard nanoparticle characterization methods, and siRNA transfection efficacy was quantified to gauge delivery potential as a function of DAG/PS modification. Our results suggest that the signaling lipids tested here imbue our LDS architectures with increased therapeutic potential, without compromising stability, encapsulation efficiency, or biocompatibility, thus presenting a natural strategy to increase nanodrug efficacy and specificity.

Improving the efficacy of liposome-mediated vascular gene therapy via lipid surface modifications.

BACKGROUND: We have previously defined mechanisms of intimal hyperplasia that could be targets for molecular therapeutics aimed at vascular pathology. However, biocompatible nanocarriers are needed for effective delivery. Cationic liposomes (CLPs) have been demonstrated as effective nanocarriers in vitro. However, in vivo success has been hampered by cytotoxicity. Recently, neutral PEGylated liposomes (PLPs) have been modified with cell-penetrating peptides (CPPs) to enhance cellular uptake. We aim to establish CPP-modified neutral liposomes as viable molecular nanocarriers in vascular smooth muscle cells. METHODS: CLPs, PLPs, and CPP-modified PLPs (R8-PLPs) were assembled with short interfering RNA (siRNA) via ethanol injection. Characterization studies determined liposomal morphology, size, and charge. siRNA encapsulation efficiency was measured via RiboGreen assay. Vascular smooth muscle cells were exposed to equal lipid/siRNA across all groups. Rhodamine-labeled liposomes were used to quantify cell association via fluorometry, live/dead dual stain was used to measure cytotoxicity, and gene silencing was measured by quantitative polymerase chain reaction. RESULTS: R8-PLPs exhibited increased encapsulation efficiency equivalent to CLPs. PLPs and R8-PLP-5 mol% and R8-PLP-10 mol% had no cytotoxic effect. CLPs demonstrated significant cytotoxicity. R8-PLP-5 mol% and R8-PLP-10 mol% exhibited increased cell association versus PLPs. R8-PLP-10 mol% resulted in significant gene silencing, in a manner dependent on lipid-to-siRNA load capacity. CONCLUSIONS: The negligible cytotoxicity and enhanced cellular association and gene silencing capacity exhibited by R8-PLPs reveal this class of liposomes as a candidate for future applications. Further modifications for optimizing R8-PLPs are still warranted to improve efficacy, and in vivo studies are needed for translational development. However, this could prove to be an optimal nanocarrier for vascular gene therapeutics.

Testosterone replacement attenuates intimal hyperplasia development in an androgen deficient model of vascular injury.

BACKGROUND: Androgen deficiency (AD) is associated with increased risk of vascular disease. Dysfunctional remodeling of the vessel wall and atypical proliferative potential of vascular smooth muscle cells (VSMCs) are fundamental processes in the development of intimal hyperplasia (IH). We have demonstrated an inverse relationship between dihydrotestosterone (DHT) levels, matrix metalloproteinase activity, and VSMC migration and proliferation in vitro. Here, we investigated the role of AD and testosterone (TST) replacement in IH development in an animal model of vascular injury to elucidate mechanisms modulated by AD that could be playing a role in the development of vascular pathogenesis. METHODS: Aged orchiectomized male rats underwent TST supplementation via controlled release pellet (0.5-35 mg). Young adult and middle-age adult intact (MI) and orchiectomized placebo (Plac) groups served as controls. All groups underwent balloon angioplasty of the left common carotid at a 14-d post-TST. Carotid tissue was collected at a 14-d post-balloon angioplasty and subjected to morphologic and immunohistochemical analyses. Human male VSMCs were treated with DHT (0-3000 nM) for 24 h then subjected to quantitative PCR for gene expression analyses and costained for F-actin and G-actin for visualization of cytoskeletal organization. RESULTS: I:M ratio was increased in Plac, subphysiological, low-physiological, and high pharmacologic level TST animals compared with MI controls but was decreased with high-physiological TST supplementation. Injury-induced expression of previously defined matrix metalloproteinase remodeling enzymes was not significantly affected by TST status. Urotensin (UTS) receptor (UTSR) staining was low in injured vessels of all young adult intact, MI, and Plac controls but was significantly upregulated in all groups receiving exogenous TST supplementation, irrespective of dose. In vitro DHT exposure increased the expression of UTSR in VSMCs in a dose-dependent manner. However, this did not correlate with any change in proliferative markers. F:G actin staining revealed that DHT-induced cytoskeletal organization in a dose-dependent manner. CONCLUSIONS: AD increased IH development in response to vascular injury, whereas physiological TST replacement attenuated this effect. AD-induced IH occurs independent of matrix remodeling mechanisms known to be heavily involved in vascular dysfunction, and AD alone does not affect the UTS and/or UTSR mechanism. Exogenous TST and/or DHT increases UTSR pathway signaling in vitro and in vivo. This modulation correlates to a shift in cytoskeletal organization and may exacerbate vasoconstrictive pathogenesis. While physiological TST replacement attenuates AD-modulated IH development, its UTS-mediated effect on vasotone may prove deleterious to overall vascular function.

Comparative analysis of polymers for short interfering RNA delivery in vascular smooth muscle cells.

UNLABELLED: The use of short interfering RNA (siRNA) to degrade messenger RNA in the cell cytoplasm and transiently attenuate intracellular proteins shows promise in the inhibition of vascular pathogenesis. However, a critical obstacle for therapeutic application is a safe and effective delivery system. Biodegradable polymers are promising alternative molecular carriers for genetic material. Here, we aim to perform a comparative analysis of poly(B-amino ester) (PBAE) and polyethylenimine (PEI) polymers in their efficacy for vascular smooth muscle cell transfection using siRNA against the glyceraldehyde 3-phosphate dehydrogenase (GAPDH) housekeeping gene as our test target. METHODS: Human aortic smooth muscle cells (HASMC) were transfected in vitro with polymers conjugated to GAPDH or negative control (NC) siRNAs. Increasing siRNA:polymer ratios were tested for optimal transfection efficiency. DharmaFECT2 chemical transfection complexes were used for comparative analysis. Live/dead dual stain was used to measure cell viability, and GAPDH gene silencing was measured by quantitative polymerase chain reaction normalized to 18S. RESULTS: The highest rate of PEI-mediated silencing was achieved with a 9µL polymer:220 pmol/mL siRNA conjugate (16 ± 2% expression versus NC; n = 6). Comparable PBAE-mediated silencing could be achieved with a 1.95µL polymer:100 pmol/mL siRNA conjugate (10 ± 1% expression versus NC; n = 5). Transfection using PEIs resulted in silencing equivalent to other methods but with less efficiency and increased cell toxicity at 24h polymer exposure. Decreasing PEI exposure time to 4 h resulted in similar silencing efficacy (21 ± 9% expression versus NC, n = 6) with an improved toxicity profile. CONCLUSIONS: Polymeric bioconjugates transfected HASMCs in a manner similar to chemical complexes, with comparable cell toxicity and silencing efficiency. PEI bioconjugates demonstrated silencing equivalent to PBAE bioconjugates, although less efficient in terms of required polymer concentrations. Given the cost-to-benefit difference between the assayed polymers, and PEI's ability to transfect HASMCs within a short duration of exposure with an improved toxicity profile, this study shows that PEI bioconjugates are a potential transfection agent for vascular tissue. Future studies will expand on this method of gene therapy to validate delivery of gene-specific inhibitors aimed at attenuating smooth muscle cell proliferation, adhesion, and migration. These studies will lay the framework for our future experimental plans to expand on this method of gene therapy for in vivo transfection in animal models of vascular disease.

A Zr-based bulk metallic glass for future stent applications: Materials properties, finite element modeling, and in vitro human vascular cell response.

Despite the prevalent use of crystalline alloys in current vascular stent technology, new biomaterials are being actively sought after to improve stent performance. In this study, we demonstrated the potential of a Zr-Al-Fe-Cu bulk metallic glass (BMG) to serve as a candidate stent material. The mechanical properties of the Zr-based BMG, determined under both static and cyclic loadings, were characterized by high strength, which would allow for the design of thinner stent struts to improve stent biocompatibility. Finite element analysis further complemented the experimental results and revealed that a stent made of the Zr-based BMG was more compliant with the beats of a blood vessel, compared with medical 316L stainless steel. The Zr-based BMG was found to be corrosion resistant in a simulated body environment, owing to the presence of a highly stable ZrO2-rich surface passive film. Application-specific biocompatibility studies were conducted using human aortic endothelial cells and smooth muscle cells. The Zr-Al-Fe-Cu BMG was found to support stronger adhesion and faster coverage of endothelial cells and slower growth of smooth muscle cells than 316L stainless steel. These results suggest that the Zr-based BMG could promote re-endothelialization and potentially lower the risk of restenosis, which are critical to improve vascular stent implantation integration. In general, findings in this study raised the curtain for the potential application of BMGs as future candidates for stent applications. STATEMENT OF SIGNIFICANCE: Vascular stents are medical devices typically used to restore the lumen of narrowed or clogged blood vessel. Despite the clinical success of metallic materials in stent-assisted angioplasty, post-surgery complications persist due to the mechanical failures, corrosion, and in-stent restenosis of current stents. To overcome these hurdles, strategies including new designs and surface functionalization have been exercised. In addition, the development of new materials with higher performance and biocompatibility can intrinsically reduce stent failure rates. The present study demonstrates the advantages of a novel material, named bulk metallic glass (BMG), over the benchmarked 316L stainless steel through experimental methods and computational simulations. It raises the curtain of new research endeavors on BMGs as competitive alternatives for stent applications.