Polyphenols-Enrichment of Vienna Sausages Using Microcapsules Containing Acidic Aqueous Extract of Boletus edulis Mushrooms.

Polyphenols are ubiquitous by-products in many plant foods. Their intake has been linked to health benefits like the reduced incidence of cardiovascular disease, diabetes, and cancer. These bioactive compounds can be successfully extracted from Boletus edulis mushrooms with acidic water. However, such extract could influence the sensory or textural properties of the product to be enriched; this inconvenience can be avoided by microencapsulating it using spray drying. In this study, the Vienna sausages were reformulated by replacing 2% of the cured meat with microcapsules containing an acidic aqueous extract of Boletus edulis mushrooms and by replacing ice flakes, an ingredient that represents 22.9% of the manufacturing recipe, with ice cubes from the same extract aiming to obtain a polyphenol enriched product. The results showed a higher content of polyphenols in sausages with extract (VSe; 568.92 µg/g) and microcapsules (VSm; 523.03 µg/g) than in the control ones (455.41 µg/g), with significant differences for 2,4-dihydroxybenzoic acid, protocatechuic acid, and 1-O-galloyl-ß-D-glucose. However, because of the oxidative stress caused to the microcapsules by the extract's spray drying, VSm had the highest oxidation state. PV and TBARS levels varied with storage time in all formulations, but given the short period tested, they were well below the allowed/recommended limit. The extract, as such, negatively affected the appearance, odor, and taste of Vienna sausages. The microcapsules, instead, determined an increase in their acceptance rate among consumers; they also prevented moisture loss and color changes during storage. In conclusion, microcapsules are more suitable for use as a polyphenol enrichment ingredient in Vienna sausages than the extract.

Biological Activity of Picrorhiza kurroa: A Source of Potential Antimicrobial Compounds against Yersinia enterocolitica.

Yersiniosis, caused by Yersinia enterocolitica, is the third most rampant zoonotic disease in Europe; the pathogen shows high antibiotic resistance. Herbs have multiple anti-microbial components that reduce microorganism resistance. Therefore, an extract of Picrorhiza kurroa (P. kurroa) was evaluated for potential antimicrobial activity. We report that the ethanolic extract of P. kurroa showed effective antimicrobial activity (zone of inhibition: 29.8 mm, Minimum inhibitory concentration (MIC): 2.45 mg/mL, minimum bactericidal concentration (MBC): 2.4 mg/mL) against Yersinia enterocolitica. Potential bioactive compounds from P. kurroa were identified using LC-MS, namely, cerberidol, annonidine A, benzyl formate, picroside-1, and furcatoside A. P. kurroa showed effective antimicrobial potential in skim milk at different pH, acidity, and water activity levels. P. kurroa affected the physiology of Yersinia enterocolitica and reduced the number of live cells. Yersinia enterocolitica, when incubated with P. kurroa extract, showed lower toxin production. Picroside-1 was isolated and showed higher antimicrobial potential in comparison to the standard antibiotic. Picroside-1 lysed the Yersinia enterocolitica cells, as observed under scanning electron microscopy. Docking revealed that picroside-1 (ligand) showed both hydrophilic and hydrophobic interactions with the dihydrofolate reductase (DHFR) protein of Yersinia enterocolitica and that DHFR is a possible drug target. The high activity and natural origin of Picroside-1 justify its potential as a possible drug candidate for Yersinia enterocolitica.

Effect of Single and Dual Modifications on Properties of Lotus Rhizome Starch Modified by Microwave and γ-Irradiation: A Comparative Study.

A comparative study between two novel starch modification technologies, i.e., microwave (MI) and γ-irradiation (IR), is of important significance for their applications. The objective of this work is to compare the changes in lotus rhizome starch (LRS) subjected to single modifications by MI (thermal treatment) and IR (non-thermal treatment), and dual modification by changing the treatment sequence, i.e., microwave followed by irradiation (MI-IR) and irradiation followed by microwave (IR-MI). The amylose content of native and modified LRS varied from 14.68 to 18.94%, the highest and lowest values found for native and MI-LRS, respectively. IR-treated LRS showed the lowest swelling power (4.13 g/g) but highest solubility (86.9%) among native and modified LRS. An increase in light transmittance value suggested a lower retrogradation rate for dual-modified starches, making them more suitable for food application at refrigeration and frozen temperatures. Dual-modified LRS showed the development of fissures and dents on the surface of granules as well as the reduction in peak intensities of OH and CH2 groups in FTIR spectra. Combined modifications (MI and IR) reduced values of pasting parameters and gelatinization properties compared to native and microwaved LRS and showed improved stability to shear thinning during cooking and thermal processing. The sequence of modification also affected the rheological properties; the G' and G″ of MI-IR LRS were lower (357.41 Pa and 50.16 Pa, respectively) than the IR-MI sample (511.96 Pa and 70.09 Pa, respectively), giving it a soft gel texture. Nevertheless, dual modification of LRS by combining MI and IR made more significant changes in starch characteristics than single modifications.

Characterization of Anthocyanins and Their Antioxidant Activities in Indian Rose Varieties (Rosa × hybrida) Using HPLC.

The present study was designed to explore the anthocyanin profile and antioxidant activities in Indian rose varieties (Rosa × hybrida). Among fifty varieties, Ashwini recorded the highest total phenolic content (427.59 ± 3.47 mg GAE/100 g) along with the highest FRAP (397.15 ± 0.82 µmol trolox/g) and DPPH free radical scavenging activity (93.47 ± 0.19%) on a fresh weight basis. A significant positive correlation was observed between total anthocyanin content, total phenolic content, and antioxidant activities. Four distinct clusters were formed according to total anthocyanins, total phenols, and antioxidant activities; white- and yellow-colored varieties were most distant from red ones. Principal component analysis revealed that variable total anthocyanin content contributed to the maximum variation among the fifty rose varieties studied. Highly anthocyanin-rich rose varieties were characterized by high-performance liquid chromatography coupled with a photodiode array detector (HPLC-PAD), which identified two major components of anthocyanins, i.e., cyanidin 3,5-di-O-glucoside and pelargonidin 3,5-di-O-glucoside. Cyanidin 3,5-di-O-glucoside was the predominant anthocyanin in red- and pink-colored varieties, whereas pelargonidin 3,5-di-O-glucoside was the major one in the orange variety. The maximum cyanidin 3,5-di-O-glucoside content was recorded in variety Ashwini (497.79 mg/100 g), whereas the maximum pelargonidin 3,5-di-O-glucoside content was recorded in Suryakiran (185.43 mg/100 g). It is suggested that the rose varieties with high anthocyanin content and antioxidant activity can be exploited as a potential source of nutraceuticals in the food industry.

Apricot Kernel: Bioactivity, Characterization, Applications, and Health Attributes.

Apricot kernel, a by-product of apricot fruit, is a rich source of proteins, vitamins, and carbohydrates. Moreover, it can be used for medicinal purposes and the formation of food ingredients. Several techniques have been adopted for the extraction of bioactive compounds from the apricot kernel such as solvent extraction, ultra-sonication, enzyme-assisted, microwave-assisted, and aqueous extraction. Apricot kernels may help to fight against various diseases such as cancer and cancer immunotherapy, as well as reduce blood pressure. Additionally, the kernel is famous due to its diverse industrial applications in various industries and fields of research such as thermal energy storage, the cosmetic industry, the pharmaceutical industry, and the food industry. Especially in the food industry, the apricot kernel can be used in the preparation of low-fat biscuits, cookies, cakes, and the fabrication of antimicrobial films. Therefore, in this review article, the bioactivity of the apricot kernel is discussed along with its chemical or nutritional composition, characterizations, and applications.

A Narrative Review on Rice Proteins: Current Scenario and Food Industrial Application.

Rice, Oryza sativa, is the major staple food that provides a larger share of dietary energy for more of the population than other cereal crops. Moreover, rice has a significant amount of protein including four different fractions such as prolamin, glutelin, globulin, and albumin with different solubility characteristics. However, these proteins exhibit a higher amino acid profile, so they are nutritionally important and possess several functional properties. Compared with many other cereal grains, rice protein is hypoallergic due to the absence of gluten, and therefore it is used to formulate food for infants and gluten-allergic people. Furthermore, the availability makes rice an easily accessible protein source and it exhibits several activities in the human body which discernibly affect total health. Because of these advantages, food industries are currently focusing on the effective application of rice protein as an alternative to animal-based and gluten-containing protein by overcoming limiting factors, such as poor solubility. Hence, it is important to gain an in-depth understanding of the rice protein to expand its application so, the underlined concept of this review is to give a current summary of rice protein, a detailed discussion of the chemistry of rice protein, and extraction techniques, and its functional properties. Furthermore, the impact of rice protein on human health and the current application of rice protein is also mentioned.

The Current Status, Bioactivity, Food, and Pharmaceutical Approaches of Calocybe indica: A Review.

Over the past few years, mushrooms have been extensively explored in the field of pharmaceutical and food science, and researchers are heading toward the search for vital components with a higher safety margin and multitarget applications. Moreover, among all age group populations, mushroom consumption has increased immensely owing to their great nutritional aspects, desirable organoleptic properties, and aroma. In addition, mushrooms continue to generate much attention chiefly in their consumption as food, as a cure for different ailments, as well as a vital commodity globally, owing to their dietary, antioxidant, and therapeutic values. Mushrooms are considered one of the important and suitable diets for patients having multiple types of diseases. Additionally, due to potential immunomodulatory effects, quality protein, and low fat, and cholesterol content, mushrooms are used as an important ingredient for food formulation. Therefore, this review article provides detailed information on Calocybe indica as they are the third most important commercially grown mushroom following button and oyster mushrooms. This review brings tangible evidence that milky white mushrooms are a great source of natural components and antioxidants with potential application in pharmaceuticals and in treating and managing different diseases. Several food applications of milky white mushrooms have also been discussed and reviewed.

Comparison of Different Extraction Solvents for Characterization of Antioxidant Potential and Polyphenolic Composition in Boletus edulis and Cantharellus cibarius Mushrooms from Romania.

Edible mushrooms are well-known for their nutritional benefits and low energy density. In addition, mushroom extracts contain various bioactive compounds that account for their antioxidant activity; the applied extraction conditions influence the extraction efficiency of such compounds. Therefore, this study investigates the effects of four extractants on the content of polyphenols and antioxidant properties of Boletus edulis and Cantharellus cibarius mushrooms, aiming to optimize the extraction process. Powders of B. edulis and C. cibarius mushrooms were subjected to extraction with acidic water (10% CH3COOH), ethanol/water/acetic acid (15:76.5:8.5, v/v/v), hexane, and diethyl ether to measure their total phenolic content (TPC), total flavonoid content (TFC), and Trolox equivalent antioxidant capacity (TEAC). Furthermore, the level of individual polyphenolic compounds in these extracts was quantified using an HPLC-DAD-ESI-MS method. Results showed that the type of solvent significantly influenced the TPC and TEAC of mushroom powder but insignificantly influenced the TFC. A very strong positive correlation was found between TPC and TEAC, but no correlation was found between TFC and TEAC or TPC and TFC. Acidic water extracted the highest amount of polyphenolic compounds from these mushroom powders. Therefore, the aqueous extract showed the highest TPC and strongest antioxidant activity. Thus, acidic water is recommended for polyphenol analysis in B. edulis and C. cibarius mushrooms.

Bioactives from Mushroom: Health Attributes and Food Industry Applications.

It is well-known that the utilization of mushrooms as therapeutic agents is not new. Over the past years, they have been used by local individuals as food, as well as medicines, throughout the world. Nowadays, mushrooms are excessively used in the medicine, pharmacy, food, and fermentation fields as well. Wild mushrooms are of particular interest, especially Trametes versicolor (commonly known as turkey mushrooms) due to their various uses in the food and pharmaceutical industries. They represent not only a huge storehouse of vitamins, minerals, and dietary fiber, but they are also an important source of bioactive polysaccharides. They are widely used in traditional oriental therapies. The fruiting bodies are used in the preparation of health tonics and tea. The present review is necessary to explore more about this mushroom-like classical taxonomy, morphology, nutritional value, bioactivity, various health attributes, mechanism of bioactive components against various diseases, and food applications. The influence of processing processes on the nutritional properties and bioactivity of the fungus is discussed. Potential bioactive components promising health attributes of Trametes versicolor are extensively described. Additionally, several in vivo and in vitro studies have demonstrated the beneficial effects of polysaccharopeptides (PSP) and Polysaccharide-K (PSK) on the aspects related to immune function and inflammation, also presenting an anticancerous effect. Moreover, PSP and PSK were successfully described to decrease several life-threatening diseases. The potential food applications of Trametes versicolor were detailed to signify the effective utilization of the mushroom in functional food formulation.

Dismantling of Waste Printed Circuit Boards with the Simultaneous Recovery of Copper: Experimental Study and Process Modeling.

The study was carried out with the aim to demonstrate the applicability of a combined chemical-electrochemical process for the dismantling of waste printed circuit boards (WPCBs) created from different types of electronic equipment. The concept implies a simple and less polluting process that allows the chemical dismantling of WPCBs with the simultaneous recovery of copper from the leaching solution and the regeneration of the leaching agent. In order to assess the performance of the dismantling process, various tests were performed on different types of WPCBs using the 0.3 M FeCl3 in 0.5 M HCl leaching system. The experimental results show that, through the leaching process, the electronic components (EC) together with other fractions can be efficiently dismounted from the surface of WPCBs, with the parallel electrowinning of copper from the copper rich leaching solution. In addition, the process was scaled up for the dismantling of 100 kg/h WPCBs and modeled and simulated using process flow modelling software ChemCAD in order to assess the impact of all steps and equipment on the technical and environmental performance of the overall process. According to the results, the dismantling of 1 kg of WPCBs requires a total energy of 0.48 kWh, and the process can be performed with an overall low environmental impact based on the obtained general environmental indexes (GEIs) values.

Chemical-Electrochemical Process Concept for Lead Recovery from Waste Cathode Ray Tube Glass.

This paper presents a novel approach for the recovery of lead from waste cathode-ray tube (CRT) glass by applying a combined chemical-electrochemical process which allows the simultaneous recovery of Pb from waste CRT glass and electrochemical regeneration of the leaching agent. The optimal operating conditions were identified based on the influence of leaching agent concentration, recirculation flow rate and current density on the main technical performance indicators. The experimental results demonstrate that the process is the most efficient at 0.6 M acetic acid concentration, flow rate of 45 mL/min and current density of 4 mA/cm2. The mass balance data corresponding to the recycling of 10 kg/h waste CRT glass in the identified optimal operating conditions was used for the environmental assessment of the process. The General Effect Indices (GEIs), obtained through the Biwer Heinzle method for the input and output streams of the process, indicate that the developed recovery process not only achieve a complete recovery of lead but it is eco-friendly as well.

Eco-friendly copper recovery process from waste printed circuit boards using Fe³âº/Fe²âº redox system.

The present study aimed at developing an original and environmentally friendly process for the recovery of copper from waste printed circuit boards (WPCBs) by chemical dissolution with Fe(3+) combined with the simultaneous electrowinning of copper and oxidant regeneration. The recovery of copper was achieved in an original set-up consisting of a three chamber electrochemical reactor (ER) connected in series with a chemical reactor (CR) equipped with a perforated rotating drum. Several experiments were performed in order to identify the optimal flow rate for the dissolution of copper in the CR and to ensure the lowest energy consumption for copper electrodeposition in the ER. The optimal hydrodynamic conditions were provided at 400 mL/min, leading to the 75% dissolution of metals and to a low specific energy consumption of 1.59 kW h/kg Cu for the electrodeposition process. In most experiments, the copper content of the obtained cathodic deposits was over 99.9%.

Copper recovery and gold enrichment from waste printed circuit boards by mediated electrochemical oxidation.

The present study aims to develop an eco-friendly chemical-electrochemical process for the simultaneous recovery of copper and separation of a gold rich residue from waste printed circuit boards (WPCBs). The process was carried out by employing two different types of reactors coupled in series: a leaching reactor with a perforated rotating drum, for the dissolution of base metals and a divided electrochemical reactor for the regeneration of the leaching solution with the parallel electrowinning of copper. The process performances were evaluated on the basis of the dissolution efficiency, current efficiency and specific energy consumptions. Finally a process scale up was realized taking into consideration the optimal values of the operating parameters. The laboratory scale leaching plant allowed the recovery of a high purity copper deposit (99.04wt.%) at a current efficiency of 63.84% and specific energy consumption of 1.75kWh/kg cooper. The gold concentration in the remained solid residue was 25 times higher than the gold concentration in the initial WPCB samples.