ABSTRACT
The molecular basis of advanced systemic mastocytosis (SM) is not fully understood and despite novel therapies the prognosis remains dismal. Exome sequencing of an index-patient with mast cell leukemia (MCL) uncovered biallelic loss-of-function mutations in the SETD2 histone methyltransferase gene. Copy-neutral loss-of-heterozygosity at 3p21.3 (where SETD2 maps) was subsequently found in SM patients and prompted us to undertake an in-depth analysis of SETD2 copy number, mutation status, transcript expression and methylation levels, as well as functional studies in the HMC-1 cell line and in a validation cohort of 57 additional cases with SM, including MCL, aggressive SM and indolent SM. Reduced or no SETD2 protein expression-and consequently, H3K36 trimethylation-was found in all cases and inversely correlated with disease aggressiveness. Proteasome inhibition rescued SETD2 expression and H3K36 trimethylation and resulted in marked accumulation of ubiquitinated SETD2 in SETD2-deficient patients but not in patients with near-normal SETD2 expression. Bortezomib and, to a lesser extent, AZD1775 alone or in combination with midostaurin induced apoptosis and reduced clonogenic growth of HMC-1 cells and of neoplastic mast cells from advanced SM patients. Our findings may have implications for prognostication of SM patients and for the development of improved treatment approaches in advanced SM.
Subject(s)
Histone-Lysine N-Methyltransferase/genetics , Histones/genetics , Lysine/genetics , Mastocytosis, Systemic/genetics , Adult , Aged , Apoptosis/drug effects , Apoptosis/genetics , Cell Line, Tumor , Female , Humans , K562 Cells , Male , Mast Cells/drug effects , Mastocytosis/genetics , Mastocytosis, Systemic/drug therapy , Methylation/drug effects , Middle Aged , Mutation/drug effects , Mutation/genetics , Prognosis , Proteasome Endopeptidase Complex/drug effects , Proteasome Endopeptidase Complex/genetics , Staurosporine/analogs & derivatives , Staurosporine/pharmacologyABSTRACT
Topical glucocorticoids (TG) such as dexamethasone (DEX) have been used for decades for the treatment of skin diseases. However, TG present well-documented side effects and their delivery to the skin is often insufficient. Therefore, many efforts have been undergone to improve the amount of drug delivered to the skin and to reduce side effects at the same time. In this work, the feasibility of DEX-submicron polymeric particles (SP) prepared by vibrational spray-drying as an approach to overcome the challenges associated with the topical administration of this drug class was evaluated. DEX was homogeneously dispersed in the SP matrix, according to confocal Raman microscopy analysis. Drug-loaded SP were incorporated into the oil phase of oil-in-water emulsions (creams). The formulation containing polymeric submicron particles (C-SP) showed controlled drug release kinetics and a significant drug accumulation in skin compared to formulations containing non-polymeric particles or free drug. DEX accumulation in the stratum corneum was evaluated by tape stripping and a depot effect over time was observed for C-SP, while the formulation containing the free drug showed a decrease over time. Similarly, C-SP presented higher drug retention in epidermis and dermis in skin penetration studies performed on pig skin in Franz diffusion cells, while drug permeation into the receptor compartment was negligible. It was demonstrated, for the first time, the advantageous application of submicron polymeric particles obtained by vibrational spray-drying in semisolid formulations for cutaneous administration to overcome challenges related to the therapy with TG such as DEX.
Subject(s)
Dexamethasone/administration & dosage , Drug Carriers/chemistry , Glucocorticoids/administration & dosage , Polymers/chemistry , Skin Absorption , Skin/metabolism , Animals , Dexamethasone/pharmacokinetics , Drug Compounding/methods , Drug Liberation , Emulsions , Glucocorticoids/pharmacokinetics , In Vitro Techniques , Microscopy, Confocal , Microscopy, Electron, Scanning , Particle Size , Skin/drug effects , Surface Properties , Sus scrofa , Tissue Distribution , VibrationABSTRACT
Spray drying is a technique used to produce solid particles from liquid solutions, emulsions or suspensions. Buchi Labortechnik developed the latest generation of spray dryers, Nano Spray Dryer B-90. This study aims to obtain, directly, submicron drug particles from an organic solution, employing this equipment and using dexamethasone as a model drug. In addition, we evaluated the influence of both the type of solvent and surfactant on the properties of the powders using a 3(2) full factorial analysis. The particles were obtained with high yields (above 60%), low water content (below 2%) and high drug content (above 80%). The surface tension and the viscosity were strongly influenced by the type of solvent. The highest powder yields were obtained for the highest surface tension and the lowest viscosity of the drug solutions. The use of ionic surfactants led to higher process yields. The laser diffraction technique revealed that the particles deagglomerate into small ones with submicrometric size, (around 1 µm) that was also observed by scanning electron microscopy. Interaction between the raw materials in the spray-dried powders was verified by calorimetric analysis. Thus, it was possible to obtain dexamethasone submicrometric particles by vibrational atomization from organic solution.
Subject(s)
Dexamethasone/chemistry , Solvents/chemistry , Surface-Active Agents/chemistry , Technology, Pharmaceutical/methods , Excipients/chemistry , Microscopy, Electron, Scanning/methods , Particle Size , Powders/chemistry , Solutions/chemistry , Surface Properties , Surface Tension , ViscosityABSTRACT
We developed a dermatological nanomedicine containing clobetasol propionate-loaded nanocapsules and evaluated its efficacy in a model of contact dermatitis after topical administration in rats. Hydrogels containing clobetasol propionate-loaded lipid-core nanocapsules or nanoemulsion (HG-CP-NC and HG-CP-NE, respectively) were prepared to evaluate the influence of the polymeric wall. They presented adequate pH values (5.50-6.50) and drug content (0.5 mg g(-1)) and their rheograms exhibited a non-Newtonian pseudoplastic behavior. The best in vitro drug release control was obtained for HG-CP-NC (1.03±0.11 µg cm(-2) h) compared to the HG-CP-NE (1.65±0.19 µg cm(-2) h) and the hydrogels containing nonencapsulated drug (HG-CP) (2.79±0.22 µg cm(-2) h). A significant increase in NTPDase activity was observed in lymphocytes for the group treated with 0.05% HG-CP-NC every other day compared to the group treated with 0.05% HG-CP every day using the in vivo model of contact dermatitis. The nanoencapsulation of clobetasol in nanocapsules led to a better control of the drug release from the semisolid nanomedicine and provided better in vivo dermatological efficacy.
Subject(s)
Clobetasol/administration & dosage , Clobetasol/chemistry , Dermatitis, Contact/drug therapy , Nanocapsules/administration & dosage , Nanocapsules/chemistry , Administration, Topical , Animals , Anti-Inflammatory Agents/administration & dosage , Anti-Inflammatory Agents/chemistry , Female , Hydrogels/administration & dosage , Hydrogels/chemistry , Hydrogen-Ion Concentration , Lymphocytes/drug effects , Nanomedicine/methods , Particle Size , Rats , Rats, WistarABSTRACT
The aim of the present work was to evaluate the feasibility to convert drug-loaded nanocapsule suspensions in a solid dosage form (tablets). Dexamethasone was used as a model drug due to its low aqueous solubility and fast drug release from conventional tablets. Granules containing dexamethasone-loaded nanocapsules were obtained by a wet granulation process using a dispersion of polyvinylpirrolidone/nanocapsules as a binder system. Granules were compressed in an eccentric compression machine (D-NC-T). A control formulation (tablets without nanocapsules) was also prepared (D-T). Tablets were characterized by means of mean weight, hardness, friability, diameter, thickness, disintegration time, drug content, morphological analysis by scanning electron microscopy (SEM), and in vitro drug release studies. D-NC-T showed adequate physicochemical characteristics according to the pharmacopeial requirements in terms of mean weight, hardness, friability, disintegration time and drug content. Intact nanocapsules in tablets were observed by SEM. In vitro drug release studies showed a slower release of dexamethasone from these tablets (D-NC-T) compared to the control formulation (D-T). Results showed that these tablets represent an interesting platform to the development of oral drug delivery systems containing polymeric nanocapsules.
Subject(s)
Nanocapsules/chemistry , Tablets/chemistry , Administration, Oral , Chemistry, Pharmaceutical/methods , Dexamethasone/administration & dosage , Dexamethasone/pharmacokinetics , Drug Delivery Systems , Humans , In Vitro Techniques , Microscopy, Electron, Scanning , Nanocapsules/ultrastructure , Nanotechnology , Polymers/chemistry , Povidone/chemistryABSTRACT
A simple and rapid high-performance liquid chromatographic method is validated for the determination of clobetasol propionate in topical nanocapsule suspensions. The method is carried out on an RP-18 column with a mobile phase composed of methanol-water (80:20 v/v) and UV detection at 241 nm. The method validation yields good results with respect to linearity, specificity, precision, accuracy, and robustness. The calibration curve in the range of 5.0-40.0 microg/mL shows a correlation coefficient of 0.9999. Precision (intra-day and inter-day) is demonstrated by a relative standard deviation lower than 1.5%. Accuracy is assessed by the recovery test of clobetasol propionate from sample matrixes (98.33 +/- 0.88%). In conclusion, the method is suitable to be applied to assay clobetasol propionate in topical formulations of polymeric nanocapsules, avoiding the use of a buffer solution in the mobile phase.
Subject(s)
Chromatography, High Pressure Liquid/methods , Chromatography, Reverse-Phase/methods , Clobetasol/analysis , Nanocapsules/chemistry , Administration, Topical , Clobetasol/chemistry , Linear Models , Reproducibility of Results , Sensitivity and SpecificityABSTRACT
CONTEXT: Our group previously reported the development of dexamethasone-loaded polymeric nanocapsules as an alternative for topical dermatological treatments. OBJECTIVE: Our study aimed to prepare and characterize a hydrogel containing this system to improve the effectiveness of the glucocorticoid for cutaneous disorders. METHODS: For the antiproliferative activity assay, a dexamethasone solution and D-NC were tested on Allium cepa root meristem model. D-NC were prepared by the interfacial deposition of preformed polymer. Hydrogels were prepared using Carbopol Ultrez 10 NF, as polymer, and characterized according to the following characteristics: pH, drug content, spreadability, viscosity, and in vitro drug release. RESULTS AND DISCUSSION: Nanocapsules showed mean particle size and zeta potential of 201 +/- 6 and -5.73 +/- 0.42 nm, respectively. They demonstrated a lower mitotic index (4.62%) compared to free dexamethasone (8.60%). Semisolid formulations presented acidic pH values and adequate drug content (between 5.4% and 6.1% and 100% and 105%, respectively). The presence of nanocapsules in hydrogels led to a decrease in their spreadability factor. Intact nanoparticles were demonstrated by TEM as well as by dynamic light scattering (mean particle size < 300 nm). In vitro studies showed a controlled dexamethasone release from hydrogels containing the drug associated to the nanocapsules following the Higuchi's squared root model (k = 20.21 +/- 2.96 mg/cm(2)/h(1/2)) compared to the hydrogels containing the free drug (k = 26.65 +/- 2.09 mg/cm(2)/h(1/2)). CONCLUSION: Taking all these results together, the hydrogel containing D-NC represent a promising approach to treat antiproliferative-related dermatological disorders.
Subject(s)
Dexamethasone/administration & dosage , Dexamethasone/chemistry , Drug Carriers/administration & dosage , Hydrogels/chemistry , Hydrogels/chemical synthesis , Nanocapsules/administration & dosage , Nanocapsules/chemistry , Administration, Cutaneous , Anti-Inflammatory Agents/administration & dosage , Anti-Inflammatory Agents/analysis , Anti-Inflammatory Agents/chemistry , Anti-Inflammatory Agents/pharmacology , Cell Cycle/drug effects , Cell Proliferation/drug effects , Chemical Phenomena , Dexamethasone/analysis , Dexamethasone/pharmacology , Diffusion , Drug Carriers/analysis , Drug Carriers/chemistry , Drug Carriers/pharmacology , Drug Compounding/methods , Hydrogen-Ion Concentration , Immunosuppressive Agents/administration & dosage , Immunosuppressive Agents/analysis , Immunosuppressive Agents/chemistry , Immunosuppressive Agents/pharmacology , Meristem/cytology , Meristem/drug effects , Mitosis/drug effects , Onions/drug effects , Particle Size , Plant Roots/cytology , Plant Roots/drug effects , Solubility , SuspensionsABSTRACT
The industrial development of polymeric nanoparticle suspensions is still limited due to their low physicochemical stability. In this paper, we evaluated the wet granulation process as an alternative method to dry polymeric nanocapsules using dexamethasone as drug model. Nanocapsule suspensions were used as granulating liquid as well as a drug-loaded-nanocarrier in the wet granulation process. Granules were evaluated regarding their drug content, mean particle size, yield, moisture content, flow properties, stability on storage, recovery studies after water redispersion and morphological characteristics (SEM). Granules containing dexamethasone-loaded polymeric nanocapsules presented good drug content (approximately 94%) and were stable for 6 months at room temperature. Morphological analyses showed nanostructures on their surface and the nanoparticles were recovered after redispersing the granules in water. These results suggest that wet granulation can be an interesting alternative to dry drug-loaded nanocapsule suspensions.
Subject(s)
Drug Delivery Systems/methods , Nanocapsules/chemistry , Polymers/chemistry , Analysis of Variance , Dexamethasone/chemistry , Drug Stability , Microscopy, Electron, Scanning , Nanocapsules/ultrastructure , Particle Size , Suspensions/chemistryABSTRACT
The influence of the polymeric amorphous materials on the physicochemical and drug release properties of drug-loaded nanocapsules as well as their role on the protection of the entrapped drug against the degradation induced by UV radiation was evaluated. Nanocapsules were prepared by interfacial deposition of preformed polymer (PLA, PLGA 50:50, and PLGA 85:15) using clobetasol propionate as the drug model. In vitro drug release was evaluated by the dialysis bag method. Photochemical stability was studied under UVA radiation. After preparation, all formulations presented nanometric mean size (180-200 nm), polydispersity index below 0.20, acid pH, negative zeta potential, and encapsulation efficiency close to 100%. Clobetasol propionate-loaded PLGA nanocapsules presented a lower physicochemical stability, showing a high drug leakage during 3 months of storage. In vitro studies showed biphasic drug release from all nanocapsules (according to an anomalous transport) and no influence of the hydrophilic characteristics of the amorphous polymeric material on the release rate. The photostability of clobetasol propionate under UVA radiation was improved by its incorporation into PLA and PLGA nanocapsules showing that besides semicrystalline polymers, amorphous polymers could also efficiently protect nanoencapsulated drugs against UV radiation.
Subject(s)
Clobetasol/chemistry , Crystallization/methods , Drug Carriers/chemistry , Nanocapsules/chemistry , Nanocapsules/ultrastructure , Nanomedicine/methods , Polyesters/chemistry , Absorption , Clobetasol/administration & dosage , Diffusion , Drug Carriers/radiation effects , Drug Stability , Light , Macromolecular Substances/chemistry , Materials Testing , Molecular Conformation , Particle Size , Phase Transition , Surface PropertiesABSTRACT
The aim of this study was to prepare and to evaluate the physicochemical and in vitro drug release characteristics of different nanostructured systems containing clobetasol propionate (CP): CP-loaded polymeric nanoparticles (nanocapsules and nanospheres) and CP-loaded nanoemulsion. Physicochemical characteristics of the formulations were monitored up to 9 months after preparation by means of drug content, encapsulation efficiency, mean size, polydispersity index, pH, and zeta potential. In vitro drug release studies were carried out using the dialysis bag method. Photostability of CP-loaded nanoparticles was evaluated by their exposition to UVA radiation. All formulations presented nanometric mean size (140-220 nm), polydispersity index below 0.25, neutral pH values, negative zeta potential and encapsulation efficiency close to 100%. All these parameters, except pH, remained unchangeable up to 9 months of storage at room temperature for CP-loaded nanocapsules. On the other hand, CP-loaded nanospheres and nanoemulsion showed an increase in their mean size, as well as in polydispersity index under storage (after 3 and 6 months, respectively). In vitro drug release studies showed a controlled release of CP from nanoparticles (nanocapsules > nanospheres > nanoemulsion) with a low burst release. Photostability of CP under UVA radiation was improved by its incorporation into nanoparticles (nanocapsules > nanoemulsions > nanospheres).
Subject(s)
Clobetasol/chemistry , Delayed-Action Preparations/chemistry , Nanostructures/chemistry , Nanostructures/ultrastructure , Water/chemistry , Clobetasol/radiation effects , Delayed-Action Preparations/radiation effects , Diffusion , Drug Stability , Light , Materials Testing , Nanostructures/radiation effects , Particle SizeABSTRACT
The emergence of vancomycin-resistant enterococci (VRE) in Europe has been ascribed to the long-time use of the glycopeptide antibiotic avoparcin as feed additive in food animals, until its ban in 1997 in EU. The pres- ence of VRE in food of animal origin is believed to represent a potential risk for the consumer. We studied the fecal carriage of VRE in broiler chickens and slaughter pigs in Italy before the avoparcin ban and eval- uated the impact of avoparcin withdrawal on the presence of VRE in raw meat products. Broilers and pigs were both found to be frequently colonized by VRE, as 36% and 24.6% of the flocks or the herds, respec- tively, were positive. Molecular typing of VRE strains by PFGE showed that animals housed in different pens within the same farm were colonized by clonally related strains. After the avoparcin ban, a decrease in the rate of VRE contamination in meat products was observed. Such a decrease was statistically significant in poultry (from 18.8% to 9.6%) but not in pork products (from 9.7% to 6.9%). The majority of VRE from all sources carried the vanA resistance gene and included Enterococcus faecium, E. faecalis, E. hirae, E. durans, and E. gallinarum. None of the strains carried the vanB gene, whereas constitutively resistant vanC-positive strains were frequently found. Our results show that avoparcin withdrawal has been successful in reducing VRE contamination in meat products. However, this measure needs to be complemented by a prudent use of glycopeptide antibiotics in human medicine.