Effect of a probiotic and an antibiotic on the mobilome of the porcine microbiota.

Introduction: To consider the growing health issues caused by antibiotic resistance from a "one health" perspective, the contribution of meat production needs to be addressed. While antibiotic resistance is naturally present in microbial communities, the treatment of farm animals with antibiotics causes an increase in antibiotic resistance genes (ARG) in the gut microbiome. Pigs are among the most prevalent animals in agriculture; therefore, reducing the prevalence of antibiotic-resistant bacteria in the pig gut microbiome could reduce the spread of antibiotic resistance. Probiotics are often studied as a way to modulate the microbiome and are, therefore, an interesting way to potentially decrease antibiotic resistance. Methods: To assess the efficacy of a probiotic to reduce the prevalence of ARGs in the pig microbiome, six pigs received either treatment with antibiotics (tylvalosin), probiotics (Pediococcus acidilactici MA18/5M; Biopower® PA), or a combination of both. Their faeces and ileal digesta were collected and DNA was extracted for whole genome shotgun sequencing. The reads were compared with taxonomy and ARG databases to identify the taxa and resistance genes in the samples. Results: The results showed that the ARG profiles in the faeces of the antibiotic and combination treatments were similar, and both were different from the profiles of the probiotic treatment (p < 0.05). The effects of the treatments were different in the digesta and faeces. Many macrolide resistance genes were detected in a higher proportion in the microbiome of the pigs treated with antibiotics or the combination of probiotics and antibiotics. Resistance-carrying conjugative plasmids and horizontal transfer genes were also amplified in faeces samples for the antibiotic and combined treatments. There was no effect of treatment on the short chain fatty acid content in the digesta or the faeces. Conclusion: There is no positive effect of adding probiotics to an antibiotic treatment when these treatments are administered simultaneously.

Salmonella Contamination of Broiler Chicken Carcasses at Critical Steps of the Slaughter Process and in the Environment of Two Slaughter Plants: Prevalence, Genetic Profiles, and Association with the Final Carcass Status.

ABSTRACT: Salmonella is a foodborne pathogen commonly associated with poultry products. The aims of this work were to (i) estimate the impact of critical steps of the slaughter process on Salmonella detection from broiler chicken carcasses in two commercial poultry slaughter plants in Quebec, Canada; (ii) investigate the presence of Salmonella in the slaughter plant environment; (iii) describe, using a high-resolution melting (HRM) approach, the HRM Salmonella profiles and serotypes present on carcasses and in the slaughter plant environment; and (iv) evaluate whether the HRM flock status after chilling could be predicted by the flock status at previous steps of the slaughter process, the status of previous flocks, or the status of the processing environment, for the same HRM profile. Eight visits were conducted in each slaughter plant over a 6-month period. In total, 379 carcass rinsates from 79 flocks were collected at five critical steps of the slaughter process. Environmental samples were also collected from seven critical sites in each slaughter plant. The bleeding step was the most contaminated, with >92% positive carcasses. A decrease of the contamination along the slaughtering process was noted, with carcasses sampled after dry-air chilling showing ≤2.5% Salmonella prevalence. The most frequently isolated serotypes were Salmonella Heidelberg, Kentucky, and Schwarzengrund. The detection of the Salmonella Heidelberg 1-1-1 HRM profile on carcasses after chilling was significantly associated with its detection at previous steps of the slaughter process and in previously slaughtered flocks from other farms during a same sampling day. Results highlight the importance of the chilling step in the control of Salmonella on broiler chicken carcasses and the need to further describe and compare the competitive advantage of Salmonella serotypes to survive processing. The current study also illustrates the usefulness of HRM typing in investigating Salmonella contamination along the slaughter process.

Distribution, diversity and persistence of Listeria monocytogenes in swine slaughterhouses and their association with food and human listeriosis strains.

Listeria monocytogenes is the etiological agent of listeriosis, a major foodborne disease and an important public health concern. Contamination of meat with L. monocytogenes occurs frequently at the slaughterhouse. Our aims were; 1) to investigate the distribution of L. monocytogenes in the processing areas of four swine slaughterhouses; 2) to describe the diversity of L. monocytogenes strains by pulsed-field gel electrophoresis; 3) to identify persistent L. monocytogenes strains and describe their distribution; 4) to investigate the associations between persistence of strains and their following characteristics: detection in food isolates, detection in human clinical isolates, and the presence of benzalkonium chloride (BAC) resistance genes. Various operation areas within the four swine slaughterhouses were sampled on four occasions. A total of 2496 samples were analyzed, and L. monocytogenes was successfully isolated from 243 samples. The proportion of positive samples ranged from 32 to 58% in each slaughterhouse and from 24 to 68% in each operation area. Fifty-eight different pulsotypes were identified and eight pulsotypes, present in samples collected during 4 visits, were considered persistent. The persistent pulsotypes were significantly more likely to be detected in food (P < 0.01, exact χ²) and human clinical cases (P < 0.01, exact χ²), respectively. Among pulsotypes harboring the BAC bcrABC resistance cassette or the emrE multidrug transporter gene, 42.8% were persistent compared to 4.5% for pulsotypes without these resistance genes (P < 0.01, exact χ²). Our study highlights the importance of persistent L. monocytogenes strains in the environmental contamination of slaughterhouses, which may lead to repeated contamination of meat products. It also shows that the presence of disinfectants resistance genes is an important contributing factor.

Broiler chicken carcasses and their associated abattoirs as a source of enterotoxigenic Clostridium perfringens: Prevalence and critical steps for contamination.

Clostridium perfringens ranks among the three most frequent bacterial pathogens causing human foodborne diseases in Canada, and poultry meat products are identified as a source of infection for humans. The objective of the current study was to estimate the proportion of broiler chicken flocks, carcasses and various environmental samples from critical locations of the slaughter plant positive for the presence of C. perfringens enterotoxin encoding gene (cpe). From the 16 visits conducted, 25% of the 79 flocks sampled, 10% of the 379 carcasses sampled and 5% of the 217 environmental samples collected were found positive for cpe. The proportion of cpe-positive carcasses was statistically different between surveyed plants, with 17.0% for one abattoir and 2.2% for the other. For the most contaminated plant, cpe-positive carcasses were identified at each step of the processing line, with prevalence varying between 10.0% and 25.0%, whereas this prevalence varied between 0% and 25.0% for the environmental surfaces sampled. Based on the results obtained, enterotoxigenic C. perfringens strains could potentially represent a risk for the consumer.

Different types of stainless steel used in equipment in meat plants do not affect the initial microbial transfer, including pathogens, from pork skin.

This study describes and measures the impact of different compositions and finishes of stainless steel used in equipment in the meat industry on the transfer of natural flora and selected pathogens from artificially contaminated pork skin. It is known that the adhesion to surfaces of Listeria monocytogenes and Salmonella, 2 pathogens frequently found in contaminated pork meat, depends on the nature and roughness of the surface. Our results show no statistically significant differences in microbial transfer regardless of the types of stainless steel considered, with the highest measured transfer difference being 0.18 log colony-forming units (CFUs)/800 cm(2). Moreover, no differences in total microbial community were observed after transfer on the 5 types of stainless steel using single-strand conformation polymorphism (SSCP). It was concluded that the different characteristics of the stainless steel tested did not affect the initial bacterial transfer in this study.

La présente étude vise à décrire et mesurer l'impact de différentes compositions et de différents finis d'acier inoxydable utilisés dans les équipements de l'industrie de la viande sur le transfert de la flore naturelle et d'agents pathogènes sélectionnés provenant de peau de porc contaminée artificiellement. Il est connu que l'adhésion de Listeria monocytogenes et Salmonella, deux agents pathogènes fréquemment retrouvés dans la viande de porc contaminée, aux surfaces dépend de la nature et de la rugosité de la surface. Nos résultats démontrent qu'il n'y a aucune différence statistiquement significative dans le transfert microbien indépendamment du type d'acier inoxydable considéré, la différence de transfert du nombre d'unités formatrices de colonies la plus élevée mesurée étant 0,18 log/800 cm2. De plus, aucune différence dans la communauté microbienne totale ne fut observée après le transfert sur les cinq types d'acier inoxydable par examen du polymorphisme de conformation. Nous avons conclu que dans la présente étude les différentes caractéristiques de l'acier inoxydable n'ont pas affecté le transfert bactérien initial.(Traduit par Docteur Serge Messier).

Analysis of Listeria monocytogenes strain distribution in a pork slaughter and cutting plant in the province of Quebec.

Following the 2008 Canadian listeriosis outbreak associated with ready-to-eat (RTE) meat products, regulations on the presence of Listeria monocytogenes in RTE food production facilities were modified by Health Canada, confirming the need to control this pathogen, not only in the final product but also in the plant environment. Information on the occurrence of this microorganism during the early steps of production, such as the slaughtering process and in the cutting area, is scarce in Canada. In this study, we sampled different production steps in a slaughtering and cutting plant in the province of Quebec over a 2-year period. The lairage pens, representative areas of the slaughter line, and cutting zones were targeted after their respective cleaning procedures. A total of 874 samples were analyzed for the presence of L. monocytogenes. Characterization was done by first genoserogrouping the isolates using multiplex PCR and then using a pulsed-field gel electrophoresis approach. L. monocytogenes was detected throughout all production stages. The 108 positive samples found were analyzed further, and we established that there were 4 different serogroups, with serogroup IIb being the most prevalent. The results of pulsed-field gel electrophoresis analysis showed a significant decrease in the diversity of strains from the first areas of the plant to the cutting room (10 pulsotypes in 13 positive samples in lairage and 9 in 86 positive samples in cutting) and also showed the overrepresentation of a single predominant strain in the cutting room environment (type 1, representing 96.1% of the isolates). Biofilm formation analysis of the strains cannot exclusively explain the transitions we observed. A strong genotypic similarity between strains isolated in the early production areas and some strains in the cutting room was shown. These results support the need for better surveillance of L. monocytogenes prior to RTE food production in order to design control strategies that are better adapted from a public health perspective.