Evaluating Polyacrylic Acid as a Universal Aqueous Binder for Ni-Rich Cathodes NMC811 and Si Anodes in Full Cell Lithium-ion Batteries.

Silicon (Si) and silicon/graphite (Si/Gr) composite anodes are promising candidates due to their high theoretical capacity, low operating potential and natural abundance for high energy density Li-ion batteries. Green electrode production, eliminating organic volatile solvents require advancement of aqueous electrodes. Engineering the binder plays a critical role for improving waterborne electrodes. Lithium substituted polyacrylic acid LiPAA has been demonstrated as a promising binder for Si/Gr anodes and for Ni-rich cathodes in different cell configurations. LiPAA is utilized to minimize the volume expansion during cycling for Si/Gr anodes. LiPAA is formed in situ during cathode slurry preparation to regulate the pH and dimmish the Li loss. Using advanced characterization techniques, we investigated the slurries, electrodes, and active material reaction with LiPAA and its effect to the cycling performance. Our results indicate that the performance of high Si containing anode is limited by the amount of Si in the electrode. The failure mechanism with respect to high Si content was studied thoroughly. Aqueous processed cathodes with LiPAA binder in combination with Si anodes outperformed NMP based cathodes. Hence, LiPAA was successfully utilized as an active binder for both a high Si containing anode and for a Ni rich cathode.

Modelling and Optimisation of Laser-Structured Battery Electrodes.

An electrochemical multi-scale model framework for the simulation of arbitrarily three-dimensional structured electrodes for lithium-ion batteries is presented. For the parameterisation, the electrodes are structured via laser ablation, and the model is fit to four different, experimentally electrochemically tested cells. The parameterised model is used to optimise the parameters of three different pattern designs, namely linear, gridwise, and pinhole geometries. The simulations are performed via a finite element implementation in two and three dimensions. The presented model is well suited to depict the experimental cells, and the virtual optimisation delivers optimal geometrical parameters for different C-rates based on the respective discharge capacities. These virtually optimised cells will help in the reduction of prototyping cost and speed up production process parameterisation.

Genotyping-by-sequencing-based identification of Arabidopsis pattern recognition receptor RLP32 recognizing proteobacterial translation initiation factor IF1.

Activation of plant pattern-triggered immunity (PTI) relies on the recognition of microbe-derived structures, termed patterns, through plant-encoded surface-resident pattern recognition receptors (PRRs). We show that proteobacterial translation initiation factor 1 (IF1) triggers PTI in Arabidopsis thaliana and related Brassicaceae species. Unlike for most other immunogenic patterns, IF1 elicitor activity cannot be assigned to a small peptide epitope, suggesting that tertiary fold features are required for IF1 receptor activation. We have deployed natural variation in IF1 sensitivity to identify Arabidopsis leucine-rich repeat (LRR) receptor-like protein 32 (RLP32) as IF1 receptor using a restriction site-associated DNA sequencing approach. RLP32 confers IF1 sensitivity to rlp32 mutants, IF1-insensitive Arabidopsis accessions and IF1-insensitive Nicotiana benthamiana, binds IF1 specifically and forms complexes with LRR receptor kinases SOBIR1 and BAK1 to mediate signaling. Similar to other PRRs, RLP32 confers resistance to Pseudomonas syringae, highlighting an unexpectedly complex array of bacterial pattern sensors within a single plant species.

Aqueous Manufacturing of Defect-Free Thick Multi-Layer NMC811 Electrodes.

Manufacturing thick electrodes for Li-ion batteries is a challenging task to fulfill, but leads to higher energy densities inside the cell. Water-based processing even adds an extra level of complexity to the procedure. The focus of this work is to implement a multi-layered coating in an industrially relevant process, to overcome issues in electrode integrity and to enable high electrochemical performance. LiNi0.8Mn0.1Co0.1O2 (NMC811) was used as the active material to fabricate single- and multi-layered cathodes with areal capacities of 8.6 mA h cm-2. A detailed description of the manufacturing process is given to establish thick defect-free aqueous electrodes. Good inter-layer cohesion and adhesion to the current collector foil are achieved by multi-layering, as confirmed by optical analysis and peel testing. Furthermore, full cells were assembled and rate capability tests were performed. These tests show that by multi-layering, an increase in specific discharge capacity (e.g., 20.7% increase for C/10) can be established for all tested C-rates.

Ethylene: A Master Regulator of Plant-Microbe Interactions under Abiotic Stresses.

The plant phytohormone ethylene regulates numerous physiological processes and contributes to plant-microbe interactions. Plants induce ethylene production to ward off pathogens after recognition of conserved microbe-associated molecular patterns (MAMPs). However, plant immune responses against pathogens are essentially not different from those triggered by neutral and beneficial microbes. Recent studies indicate that ethylene is an important factor for beneficial plant-microbial association under abiotic stress such as salt and heat stress. The association of beneficial microbes with plants under abiotic stresses modulates ethylene levels which control the expression of ethylene-responsive genes (ERF), and ERFs further regulate the plant transcriptome, epi-transcriptome, Na+/K+ homeostasis and antioxidant defense mechanisms against reactive oxygen species (ROS). Understanding ethylene-dependent plant-microbe interactions is crucial for the development of new strategies aimed at enhancing plant tolerance to harsh environmental conditions. In this review, we underline the importance of ethylene in beneficial plant-microbe interaction under abiotic stresses.

The EDS1-PAD4-ADR1 node mediates Arabidopsis pattern-triggered immunity.

Plants deploy cell-surface and intracellular leucine rich-repeat domain (LRR) immune receptors to detect pathogens1. LRR receptor kinases and LRR receptor proteins at the plasma membrane recognize microorganism-derived molecules to elicit pattern-triggered immunity (PTI), whereas nucleotide-binding LRR proteins detect microbial effectors inside cells to confer effector-triggered immunity (ETI). Although PTI and ETI are initiated in different host cell compartments, they rely on the transcriptional activation of similar sets of genes2, suggesting pathway convergence upstream of nuclear events. Here we report that PTI triggered by the Arabidopsis LRR receptor protein RLP23 requires signalling-competent dimers of the lipase-like proteins EDS1 and PAD4, and of ADR1 family helper nucleotide-binding LRRs, which are all components of ETI. The cell-surface LRR receptor kinase SOBIR1 links RLP23 with EDS1, PAD4 and ADR1 proteins, suggesting the formation of supramolecular complexes containing PTI receptors and transducers at the inner side of the plasma membrane. We detected similar evolutionary patterns in LRR receptor protein and nucleotide-binding LRR genes across Arabidopsis accessions; overall higher levels of variation in LRR receptor proteins than in LRR receptor kinases are consistent with distinct roles of these two receptor families in plant immunity. We propose that the EDS1-PAD4-ADR1 node is a convergence point for defence signalling cascades, activated by both surface-resident and intracellular LRR receptors, in conferring pathogen immunity.

ABA-Dependent Salt Stress Tolerance Attenuates Botrytis Immunity in Arabidopsis.

Plants have evolved adaptive measures to cope with abiotic and biotic challenges simultaneously. Combinatorial stress responses require environmental signal integration and response prioritization to balance stress adaptation and growth. We have investigated the impact of salt, an important environmental factor in arid regions, on the Arabidopsis innate immune response. Activation of a classical salt stress response resulted in increased susceptibility to infection with hemibiotrophic Pseudomonas syringae or necrotrophic Alternaria brassicicola, and Botrytis cinerea, respectively. Surprisingly, pattern-triggered immunity (PTI)-associated responses were largely unaffected upon salt pre-treatment. However, we further observed a strong increase in phytohormone levels. Particularly, abscisic acid (ABA) levels were already elevated before pathogen infection, and application of exogenous ABA substituted for salt-watering in increasing Arabidopsis susceptibility toward B. cinerea infection. We propose a regulatory role of ABA in attenuating Botrytis immunity in this plant under salt stress conditions.

Determining phase transitions of layered oxides via electrochemical and crystallographic analysis.

The chemical diffusion coefficient in LiNi1/3Mn1/3Co1/3O2 was determined via the galvanostatic intermittent titration technique in the voltage range 3 to 4.2 V. Calculated diffusion coefficients in these layered oxide cathodes during charging and discharging reach a minimum at the open-circuit voltage of 3.8 V and 3.7 V vs. Li/Li+, respectively. The observed minima of the chemical diffusion coefficients indicate a phase transition in this voltage range. The unit cell parameters of LiNi1/3Mn1/3Co1/3O2 cathodes were determined at different lithiation states using ex situ crystallographic analysis. It was shown that the unit cell parameter variation correlates well with the observed values for chemical diffusion in NMC cathodes; with a notable change in absolute values in the same voltage range. We relate the observed variation in unit cell parameters to the nickel conversion into the trivalent state, which is Jahn-Teller active, and to the re-arrangement of lithium ions and vacancies.

Plant cell surface immune receptor complex signaling.

Plant plasma membrane pattern recognition receptors are key to microbe sensing and activation of immunity to microbial invasion. Plants employ several types of such receptors that differ mainly in the structure of their ectodomains and the presence or absence of a cytoplasmic protein kinase domain. Plant immune receptors do not function as single entities, but form larger complexes which undergo compositional changes in a ligand-dependent manner. Here, we highlight current knowledge of molecular mechanisms underlying receptor complex dynamics and regulation, and cover early signaling networks implicated in the activation of generic plant immune responses. We further discuss how an increasingly comprehensive set of immune receptors may be employed to engineer crop plants with enhanced, durable resistance to microbial infection.

Microbe-associated molecular pattern-induced calcium signaling requires the receptor-like cytoplasmic kinases, PBL1 and BIK1.

BACKGROUND: Plant perception of conserved microbe-derived or damage-derived molecules (so-called microbe- or damage-associated molecular patterns, MAMPs or DAMPs, respectively) triggers cellular signaling cascades to initiate counteracting defence responses. Using MAMP-induced rise in cellular calcium levels as one of the earliest biochemical readouts, we initiated a genetic screen for components involved in early MAMP signaling in Arabidopsis thaliana. RESULTS: We characterized here the "changed calcium elevation 5" (cce5) mutant, where five allelic cce5 mutants were isolated. They all show reduced calcium levels after elicitation with peptides representing bacteria-derived MAMPs (flg22 and elf18) and endogenous DAMP (AtPep1), but a normal response to chitin octamers. Mapping, sequencing of the mutated locus and complementation studies revealed CCE5 to encode the receptor-like cytoplasmic kinase (RLCK), avrPphB sensitive 1-like 1 (PBL1). Kinase activities of PBL1 derived from three of the cce5 alleles are abrogated in vivo. Validation with T-DNA mutants revealed that, besides PBL1, another RLCK, Botrytis-induced kinase 1 (BIK1), is also required for MAMP/DAMP-induced calcium elevations. CONCLUSIONS: Hence, PBL1 and BIK1 (but not two related RLCKs, PBS1 and PBL2) are required for MAMP/DAMP-induced calcium signaling. It remains to be investigated if the many other RLCKs encoded in the Arabidopsis genome affect early calcium signal transduction - perhaps in dependence on the type of MAMP/DAMP ligands. A future challenge would be to identify the substrates of these various RLCKs, in order to elucidate their signaling role between the receptor complexes at the plasma membrane and downstream cellular signaling components.

Large area nanostructured arrays: optical properties of metallic nanotubes.

In this study, large area metallic nanotube arrays on flexible plastic substrates are produced by templating the growth of a cosputtered alloy using anodized aluminum oxide membranes. These nanotube arrays are prepared over large areas (ca. squared centimeters) by reducing the residual stress within the thin multilayered structure. The nanotubes are approximately 20 nm in inner diameter, having walls of <10 nm in thickness, and are arranged in a close packed configuration. Optically the nanotube arrays exhibit light trapping behavior (not plasmonic), where the reflectivity is less than 15% across the visible spectra compared to >40% for a flat sample using the same alloy. When the nanotubes are exposed to high relative humidity, they spontaneously fill, with a concomitant change in their visual appearance. The filling of the nanotubes is confirmed using contact angle measurements, with the nanotubes displaying a strong hydrophilic character compared to the weak behavior of the flat sample. The ability to easily fabricate large area nanotube arrays which display exotic behavior paves the way for their uptake in real world applications such as sensors and solar energy devices.