Mechanically promoted lipid-based filaments via composition tuning for extrusion-based 3D-printing.

Lipid excipients are favorable materials in pharmaceutical formulations owing to their natural, biodegradable, low-toxic and solubility/permeability enhancing properties. The application of these materials with advanced manufacturing platforms, particularly filament-based 3D-printing, is attractive for personalized manufacturing of thermolabile drugs. However, the filament's weak mechanical properties limit their full potential. In this study, highly flexible filaments were extruded using PG6-C16P, a lipid-based excipient belonging to the group of polyglycerol esters of fatty acids (PGFAs), based on tuning the ratio between its major and minor composition fractions. Increasing the percentage of the minor fractions in the system was found to enhance the relevant mechanical filament properties by 50-fold, guaranteeing a flawless 3D-printability. Applying a novel liquid feeding approach further improved the mechanical filament properties at lower percentage of minor fractions, whilst circumventing the issues associated with the standard extrusion approach such as low throughput. Upon drug incorporation, the filaments retained high mechanical properties with a controlled drug release pattern. This work demonstrates PG6-C16 P as an advanced lipid-based material and a competitive printing excipient that can empower filament-based 3D-printing.

Filament-based 3D-printing of placebo dosage forms using brittle lipid-based excipients.

In order to expand the limited portfolio of available polymer-based excipients for fabricating three-dimensional (3D) printed pharmaceutical products, Lipid-based excipients (LBEs) have yet to be thoroughly investigated. The technical obstacle of LBEs application is, however their crystalline nature that renders them very brittle and challenging for processing via 3D-printing. In this work, we evaluated the functionality of LBEs for filament-based 3D-printing of oral dosage forms. Polyglycerol partial ester of palmitic acid and polyethylene glycols monostearate were selected as LBEs, based on their chemical structure, possessing polar groups for providing hydrogen-bonding sites. A fundamental understanding of structure-function relationship was built to screen the critical material attributes relevant for both extrusion and 3D-printing processes. The thermal behavior of lipids, including the degree of their supercooling, was the critical attribute for their processing. The extrudability of materials was improved through different feeding approaches, including the common powder feeding and a devised liquid feeding setup. Liquid feeding was found to be more efficient, allowing the production of filaments with high flexibility and improved printability. Filaments with superior performance were produced using polyglycerol ester of palmitic acid. In-house designed modifications of the utilized 3D-printer were essential for a flawless processing of the filaments.

Sequence-Defined Heteromultivalent Precision Glycomacromolecules Bearing Sulfonated/Sulfated Nonglycosidic Moieties Preferentially Bind Galectin-3 and Delay Wound Healing of a Galectin-3 Positive Tumor Cell Line in an In Vitro Wound Scratch Assay.

Within this work, a new class of sequence-defined heteromultivalent glycomacromolecules bearing lactose residues and nonglycosidic motifs for probing glycoconjugate recognition in carbohydrate recognition domain (CRD) of galectin-3 is presented. Galectins, a family of ß-galactoside-binding proteins, are known to play crucial roles in different signaling pathways involved in tumor biology. Thus, research has focused on the design and synthesis of galectin-targeting ligands for use as diagnostic markers or potential therapeutics. Heteromultivalent precision glycomacromolecules have the potential to serve as ligands for galectins. In this work, multivalency and the introduction of nonglycosidic motifs bearing either neutral, amine, or sulfonated/sulfated groups are used to better understand binding in the galectin-3 CRD. Enzyme-linked immunosorbent assays and surface plasmon resonance studies are performed, revealing a positive impact of the sulfonated/sulfated nonglycosidic motifs on galectin-3 binding but not on galectin-1 binding. Selected compounds are then tested with galectin-3 positive MCF 7 breast cancer cells using an in vitro would scratch assay. Preliminary results demonstrate a differential biological effect on MCF 7 cells with high galectin-3 expression in comparison to an HEK 293 control with low galectin-3 expression, indicating the potential for sulfonated/sulfated heteromultivalent glycomacromolecules to serve as preferential ligands for galectin-3 targeting.

Asymmetrically Branched Precision Glycooligomers Targeting Langerin.

Asymmetrically branched precision glycooligomers are synthesized by solid-phase polymer synthesis for studying multivalent carbohydrate-protein interactions. Through the stepwise assembly of Fmoc-protected oligo(amidoamine) building blocks and Fmoc/Dde-protected lysine, straightforward variation of structural parameters such as the number and length of arms, as well as the number and position of carbohydrate ligands, is achieved. Binding of 1-arm and 3-arm glycooligomers toward lectin receptors langerin and concanavalin A (ConA) was evaluated where the smallest 3-arm glycooligomer shows the highest binding toward langerin, and stepwise elongation of one, two, or all three arms leads to decreased binding. When directly comparing binding toward langerin and ConA, we find that structural variation of the scaffold affects glycomimetic ligand binding differently for the different targets, indicating the potential to tune such ligands not only for their avidity but also for their selectivity toward different lectins.

Effects of linker and liposome anchoring on lactose-functionalized glycomacromolecules as multivalent ligands for binding galectin-3.

In this work, we present a bottom-up approach for the synthesis of lactose-functionalized glycomacromolecules and glycofunctionalized liposomes and apply these compounds to investigate their effects of multivalent presentation on binding to galectin-3. Step-wise assembly of tailor-made building blocks on solid supports was used to synthesize a series of oligo(amidoamine) scaffolds that were further conjugated to lactose via copper catalyzed 1,3-dipolar cycloaddition. Binding studies with galectin-3 revealed affinities in the micromolar range that increased with increasing carbohydrate valency, and decreased with increasing size and linker flexibility. To further explore their multivalency, selected glycomacromolecules were conjugated to lipids and used in liposomal formulations. Binding studies show a further increase in binding in nanomolar ranges in dependence of both ligand structure and liposomal presentation, demonstrating the power of combining the two approaches.

Monodisperse Sequence-Controlled α-l-Fucosylated Glycooligomers and Their Multivalent Inhibitory Effects on LecB.

The opportunistic bacterium Pseudomonas aeruginosa, often exhibiting multiresistance against conventional antibiotics, expresses the lectin LecB that is suspected to be an important factor during biofilm formation via interactions with cell-surface presented carbohydrate ligands such as the blood group antigens. Therefore, carbohydrate-based ligands interfering with LecB binding have the potential to lead to new anti-biofilm and anti-adhesion therapies. This study explores in vitro binding potencies of glycomimetic ligands containing up to six α-l-fucose ligands on a monodisperse, sequence-controlled oligoamide scaffold interacting with LecB. Surface plasmon resonance (SPR) and a modified enzyme-linked lectin assay (mELLA) revealed an increasing affinity to LecB with increasing fucose valency. Furthermore, fucosylated glycooligomers were shown to inhibit the formation of P. aeruginosa biofilm up to 20%. Overall these results show the potential of fucosylated oligoamides to be further developed as inhibitors of LecB binding and biofilm formation.

Toward Orthogonal Preparation of Sequence-Defined Monodisperse Heteromultivalent Glycomacromolecules on Solid Support Using Staudinger Ligation and Copper-Catalyzed Click Reactions.

The investigation of heteromultivalent interactions of complex glycoligands and proteins is critical for understanding important biological processes and developing carbohydrate-based pharmaceutics. Synthetic glycomimetics, derived by mimicking complex glycoligands on a variety of scaffolds, have become important tools for studying the role of carbohydrates in chemistry and biology. In this paper, we report on a new synthetic strategy for the preparation of monodisperse, sequence-defined glycooligomers or so-called precision glycomacromolecules based on solid phase oligomer synthesis and the Staudinger ligation. This strategy employs a solid-supported synthetic approach using a novel carboxy-functionalized building block which bears a functional handle required for Staudinger ligation on solid support. Furthermore, we combined Staudinger ligation and copper catalyzed azide alkyne cycloaddition (CuAAC) reactions to synthesize heteromultivalent glycooligomers on solid support for the first time, demonstrating the utility of this approach for the synthesis of heterofunctional glycomacromolecules.

Sequence-Controlled Glycopolymers via Step-Growth Polymerization of Precision Glycomacromolecules for Lectin Receptor Clustering.

A versatile approach for the synthesis of sequence-controlled multiblock copolymers, using a combination of solid phase synthesis and step-growth polymerization by photoinduced thiol-ene coupling (TEC) is presented. Following this strategy, a series of sequence-controlled glycopolymers is derived from the polymerization of a hydrophilic spacer macromonomer and different glycomacromonomers bearing between one to five α-d-Mannose (Man) ligands. Through the solid phase assembly of the macromonomers, the number and positioning of spacer and sugar moieties is controlled and translates into the sequence-control of the final polymer. A maximum M̅n of 16 kDa, corresponding to a X̅n of 10, for the applied macromonomers is accessible with optimized polymerization conditions. The binding behavior of the resulting multiblock glycopolymers toward the model lectin Concanavalin A (ConA) is studied via turbidity assays and surface plasmon resonance (SPR) measurements, comparing the ability of precision glycomacromolecules and glycopolymers to bind to and cross-link ConA in dependence of the number of sugar moieties and overall molecular weight. The results show that there is a clear correlation between number of Man ligands and Con A binding and clustering, whereas the length of the glycooligomer- or polymer backbone seems to have no effect.