Lithium-Oxygen Batteries and Related Systems: Potential, Status, and Future.

The goal of limiting global warming to 1.5 °C requires a drastic reduction in CO2 emissions across many sectors of the world economy. Batteries are vital to this endeavor, whether used in electric vehicles, to store renewable electricity, or in aviation. Present lithium-ion technologies are preparing the public for this inevitable change, but their maximum theoretical specific capacity presents a limitation. Their high cost is another concern for commercial viability. Metal-air batteries have the highest theoretical energy density of all possible secondary battery technologies and could yield step changes in energy storage, if their practical difficulties could be overcome. The scope of this review is to provide an objective, comprehensive, and authoritative assessment of the intensive work invested in nonaqueous rechargeable metal-air batteries over the past few years, which identified the key problems and guides directions to solve them. We focus primarily on the challenges and outlook for Li-O2 cells but include Na-O2, K-O2, and Mg-O2 cells for comparison. Our review highlights the interdisciplinary nature of this field that involves a combination of materials chemistry, electrochemistry, computation, microscopy, spectroscopy, and surface science. The mechanisms of O2 reduction and evolution are considered in the light of recent findings, along with developments in positive and negative electrodes, electrolytes, electrocatalysis on surfaces and in solution, and the degradative effect of singlet oxygen, which is typically formed in Li-O2 cells.

Locating intercalants within lipid bilayers using fluorescence quenching by bromophospholipids and iodophospholipids.

In previous work, we have been able to determine the depth of intercalated molecules within the lipid bilayer using the solvent polarity sensitivity of three spectroscopic techniques: the 13C NMR chemical shift (δ); the fluorescence emission wavelength (λem), and the ESR ß-H splitting constants (aß-H). In the present paper, we use the quenching by a heavy atom (Br or I), situated at a known location along a phospholipid chain, as a probe of the location of a fluorescent moiety. We have synthesized various phospholipids with bromine (or iodine) atoms substituted at various locations along the lipid chain. The latter halolipids were intercalated in turn with various fluorophores into DMPC liposomes, biomembranes and erythrocyte ghosts. The most effective fluorescence quenching occurs when the heavy atom location corresponds to that of the fluorophore. The results show that generally speaking the fluorophore intercalates the same depth independent of which lipid bilayer is used. KBr (or KI) is the most effective quencher when the fluorophore resides in or at the aqueous phase. Presumably because of iodine's larger radius and spin coupling constant, the iodine analogs are far less discriminating in the depth range it quenches.

Shedding Light on the Oxygen Reduction Reaction Mechanism in Ether-Based Electrolyte Solutions: A Study Using Operando UV-Vis Spectroscopy.

Using UV-vis spectroscopy in conjunction with various electrochemical techniques, we have developed a new effective operando methodology for investigating the oxygen reduction reactions (ORRs) and their mechanisms in nonaqueous solutions. We can follow the in situ formation and presence of superoxide moieties during ORR as a function of solvent, cations, anions, and additives in the solution. Thus, using operando UV-vis spectroscopy, we found evidence for the formation of superoxide radical anions during oxygen reduction in LiTFSI/diglyme electrolyte solutions. Nitro blue tetrazolium (NBT) was used to indicate the presence of superoxide moieties based on its unique spectral response. Indeed, the spectral response of NBT containing solutions undergoing ORR could provide a direct indication for the level of association of the Li cations with the electrolyte anions.

2,4-Dimethoxy-2,4-dimethylpentan-3-one: An Aprotic Solvent Designed for Stability in Li-O2 Cells.

In this study, we present a new aprotic solvent, 2,4-dimethoxy-2,4-dimethylpentan-3-one (DMDMP), which is designed to resist nucleophilic attack and hydrogen abstraction by reduced oxygen species. Li-O2 cells using DMDMP solutions were successfully cycled. By various analytical measurements, we showed that even after prolonged cycling only a negligible amount of DMDMP was degraded. We suggest that the observed capacity fading of the Li-O2 DMDMP-based cells was due to instability of the lithium anode during cycling. The stability toward oxygen species makes DMDMP an excellent solvent candidate for many kinds of electrochemical systems which involve oxygen reduction and assorted evaluation reactions.

The importance of solvent selection in Li-O2 cells.

We have examined the effect of glyme selection on the cycling behavior of Li-O2 cells. We conclude that diglyme is the optimal solvent for prolonged cycling. We have also focused on the effect of electrolyte solution instability as compared to other cell components.

Feasibility of Full (Li-Ion)-O2 Cells Comprised of Hard Carbon Anodes.

Aprotic Li-O2 battery is an exciting concept. The enormous theoretical energy density and cell assembly simplicity make this technology very appealing. Nevertheless, the instability of the cell components, such as cathode, anode, and electrolyte solution during cycling, does not allow this technology to be fully commercialized. One of the intrinsic challenges facing researchers is the use of lithium metal as an anode in Li-O2 cells. The high activity toward chemical moieties and lack of control of the dissolution/deposition processes of lithium metal makes this anode material unreliable. The safety issues accompanied by these processes intimidate battery manufacturers. The need for a reliable anode is crucial. In this work we have examined the replacement of metallic lithium anode in Li-O2 cells with lithiated hard carbon (HC) electrodes. HC anodes have many benefits that are suitable for oxygen reduction in the presence of solvated lithium cations. In contrast to lithium metal, the insertion of lithium cations into the carbon host is much more systematic and safe. In addition, with HC anodes we can use aprotic solvents such as glymes that are suitable for oxygen reduction applications. By contrast, lithium cations fail to intercalate reversibly into ordered carbon such as graphite and soft carbons using ethereal electrolyte solutions, due to detrimental co-intercalation of solvent molecules with Li ions into ordered carbon structures. The hard carbon electrodes were prelithiated prior to being used as anodes in the Li-O2 rechargeable battery systems. Full cells containing diglyme based solutions and a monolithic carbon cathode were measured by various electrochemical methods. To identify the products and surface films that were formed during cells operation, both the cathodes and anodes were examined ex situ by XRD, FTIR, and electron microscopy. The HC anodes were found to be a suitable material for (Li-ion)-O2 cell. Although there are still many challenges to tackle, this study offers a more practical direction for this promising battery technology and sets up a platform for further systematic optimization of its various components.

Mechanistic Role of Li⁺ Dissociation Level in Aprotic Li-O2 Battery.

The kinetics and thermodynamics of oxygen reduction reactions (ORR) in aprotic Li electrolyte were shown to be highly dependent on the surrounding chemical environment and electrochemical conditions. Numerous reports have demonstrated the importance of high donor number (DN) solvents for enhanced ORR, and attributed this phenomenon to the stabilizing interactions between the reduced oxygen species and the solvent molecules. We focus herein on the often overlooked effect of the Li salt used in the electrolyte solution. We show that the level of dissociation of the salt used plays a significant role in the ORR, even as important as the effect of the solvent DN. We clearly show that the salt used dictates the kinetics and thermodynamic of the ORR, and also enables control of the reduced Li2O2 morphology. By optimizing the salt composition, we have managed to demonstrate a superior ORR behavior in diglyme solutions, even when compared to the high DN DMSO solutions. Our work paves the way for optimization of various solvents with reasonable anodic and cathodic stabilities, which have so far been overlooked due to their relatively low DN.

Catalytic Behavior of Lithium Nitrate in Li-O2 Cells.

The development of a successful Li-O2 battery depends to a large extent on the discovery of electrolyte solutions that remain chemically stable through the reduction and oxidation reactions that occur during cell operations. The influence of the electrolyte anions on the behavior of Li-O2 cells was thought to be negligible. However, it has recently been suggested that specific anions can have a dramatic effect on the chemistry of a Li-O2 cell. In the present paper, we describe how LiNO3 in polyether solvents can improve both oxygen reduction (ORR) and oxygen evolution (OER) reactions. In particular, the nitrate anion can enhance the ORR by enabling a mechanism that involves solubilized species like superoxide radicals, which allows for the formation of submicronic Li2O2 particles. Such phenomena were also observed in Li-O2 cells with high donor number solvents, such as dimethyl sulfoxide dimethylformamide (DMF) and dimethylacetamide (DMA). Nevertheless, their instability toward oxygen reduction, lithium metals, and high oxidation potentials renders them less suitable than polyether solvents. In turn, using catalysts like LiI to reduce the OER overpotential might enhance parasitic reactions. We show herein that LiNO3 can serve as an electrolyte and useful redox mediator. NO2(-) ions are formed by the reduction of nitrate ions on the anode. Their oxidation forms NO2, which readily oxidizes to Li2O2. The latter process moves the OER overpotentials down into a potential window suitable for polyether solvent-based cells. Advanced analytical tools, including in situ electrochemical quartz microbalance (EQCM) and ESR plus XPS, HR-SEM, and impedance spectroscopy, were used for the studies reported herein.

NMR-based molecular ruler for determining the depth of intercalants within the lipid bilayer. Part V: a comparison of liposomes, bioliposomes and erythrocyte ghosts.

Afri et al. (2014a,b) have recently reported their mapping of DMPC liposomes using (13)C NMR in conjunction with a wide range of difunctional intercalants: n-ketoesters, n-ketoacids and n-ketophosphatidylcholines. The present study initiates a comparable study of bioliposomes and erythrocyte ghosts. This required the (13)C NMR characterization of these systems for the first time, and further involved a determination of the signals of three doubly (13)C-labeled intercalants, in particular, n-ketophosphatidylcholines where n=4, 8 and 12. This study reveals that DMPC liposomes, bioliposomes and erythrocyte ghosts, with all their structural differences, are not radically different from the perspective of polarity gradient. Any differences observed reflect the additives often naturally present in these lipid systems.

NMR-based molecular ruler for determining the depth of intercalants within the lipid bilayer: Part III: studies on keto esters and acids.

The development of "molecular rulers" would allow one to quantitatively locate the penetration depth of intercalants within lipid bilayers. To this end, an attempt was made to correlate the (13)C NMR chemical shift of polarizable "reporter" carbons (e.g., carbonyls) of intercalants within DMPC liposomal bilayers - with the polarity it experiences, and with its Angstrom distance from the interface. This requires families of molecules with two "reporter carbons" separated by a known distance, residing at various depths/polarities within the bilayer. For this purpose, two homologous series of dicarbonyl compounds, methyl n-oxooctadecanoates and the corresponding n-oxooctadecanoic acids (n=4-16), were synthesized. To assist in assignment and detection several homologs in each system were prepared (13)C-enriched in both carbonyls. Within each family, the number of carbons and functional groups remains the same, with the only difference being the location of the second ketone carbonyl along the fatty acid chain. Surprisingly, the head groups within each family are not anchored near the lipid-water interface, nor are they even all located at the same depth. Nevertheless, using an iterative best fit analysis of the data points enables one to obtain an exponential curve. The latter gives substantial insight into the correlation between polarity (measured in terms of the Reichardt polarity parameter, ET(30)) and penetration depth into the liposomal bilayer. Still missing from this curve are data points in the moderate polarity range.

NMR-based molecular ruler for determining the depth of intercalants within the lipid bilayer. Part IV: studies on ketophospholipids.

In our companion paper, we described the preparation and intercalation of two homologous series of dicarbonyl compounds, methyl n-oxooctadecanoates and the corresponding n-oxooctadecanoic acids (n=4-16), into DMPC liposomes. (13)C NMR chemical shift of the various carbonyls was analyzed using an E(T)(30) solvent polarity-chemical shift correlation table and the corresponding calculated penetration depth (in Å). An iterative best fit analysis of the data points revealed an exponential correlation between E(T)(30) micropolarity and the penetration depth (in Å) into the liposomal bilayer. However, this study is still incomplete, since the plot lacks data points in the important area of moderately polarity, i.e., in the E(T)(30) range of 51-45.5 kcal/mol. To correct this lacuna, a family of ketophospholipids was prepared in which the above n-oxooctadecanoic acids were attached to the sn-2 position of a phosphatidylcholine with a palmitic acid chain at sn-1. To assist in assignment and detection several derivatives were prepared (13)C-enriched in both carbonyls. The various homologs were intercalated into DMPC liposomes and give points specifically in the missing area of the previous polarity-penetration correlation graph. Interestingly, the calculated exponential relationship of the complete graph was essentially the same as that calculated in the companion paper based on the methyl n-oxooctadecanoates and the corresponding n-oxooctadecanoic acids alone. The polarity at the midplane of such DMPC systems is ca. 33 kcal/mol and is not expected to change very much if we extend the lipid chains. This paper concludes with a chemical ruler that maps the changing polarity experienced by an intercalant as it penetrates the liposomal bilayer.

On the Challenge of Electrolyte Solutions for Li-Air Batteries: Monitoring Oxygen Reduction and Related Reactions in Polyether Solutions by Spectroscopy and EQCM.

Polyether solvents are considered interesting and important candidates for Li-O2 battery systems. Discharge of Li-O2 battery systems forms Li oxides. Their mechanism of formation is complex. The stability of most relevant polar aprotic solvents toward these Li oxides is questionable. Specially high surface area carbon electrodes were developed for the present work. In this study, several spectroscopic tools and in situ measurements using electrochemical quartz crystal microbalance (EQCM) were employed to explore the discharge-charge processes and related side reactions in Li-O2 battery systems containing electrolyte solutions based on triglyme/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) electrolyte solutions. The systematic mechanism of lithium oxides formation was monitored. A combination of Fourier transform infrared (FTIR), NMR, and matrix-assisted laser desorption/ionization (MALDI) measurements in conjunction with electrochemical studies demonstrated the intrinsic instability and incompatibility of polyether solvents for Li-air batteries.

1,1-diamino-2,2-dinitroethylenes are always zwitterions.

The nitration of tetraiodoethylene (7) yields 1,1-diiodo-2,2-dinitroethylene (8). The latter reacts with alkylamines 9 or alkyldiamines 11 to give the corresponding acyclic 1,1-diamino-2,2-dinitroethylenes 10 or their cyclic analogs 12, respectively. On the basis of liquid and solid-state (13)C and (15)N NMR data, x-ray analysis and ab initio calculations, we suggest that the title compounds are always zwitterionic and that the C(A)-C(N) bond is not a true double bond.

The effect of intercalants on the host liposome.

When phospholipids are vigorously dispersed in water, liposomes are formed. In the present study, we have explored the effect of intercalant concentration on various properties of unilamellar liposomes. Liposomes were sonically intercalated with vitamin E acetate (VitEAc) and hypericin (Hy) until no difference in light transmission was observed, which reflects the formation of liposomes of minimal diameter. Our studies indicate that the intercalant structure and concentration have an influence on the liposome diameter, which could be directly measured by cryogenic transmittance electronic microscopy. Thus, intercalated VitEAc substantially decreased the diameter of unilamellar dimyristoylphosphatidylcholine liposomes, whereas Hy did not. In addition, we followed peak intensities in the absorbance and fluorescence spectra of Hy as a function of intercalant concentration in the liposomal solution. Initially, the fluorescence intensity increased linearly with concentration; however, the curve then arched asymptotically, followed by a decrease in fluorescence at yet higher concentrations. Because the Hy monomer is the only species that emits fluorescence, we believe that the decrease of fluorescence intensity is the result of Hy aggregation.

Using fluorescence to locate intercalants within the lipid bilayer of liposomes, bioliposomes and erythrocyte ghosts.

In previous work, we have shown the utility of the "NMR technique" in locating intercalants within the lipid bilayer. We describe herein the development of a more sensitive and complementary "fluorescence technique" for this purpose and its application to liposomes, bioliposomes and erythrocyte ghosts. This technique is based on the observation in selected compounds of an excellent correlation between the emission wavelength (λ(em)) and Dimroth-Reichardt E(T)(30) polarity parameter for the solvent in which the fluorescence emission spectrum was obtained.

A reinvestigation of the reaction of coumarins with superoxide in the liposomal bilayer: correlation between depth and reactivity.

Afri et al. reported in this journal (Free Radic. Biol. Med.32:605-618; 2002) that a direct relationship exists between the depth of alkanoylcoumarins 1 within the liposomal lipid bilayer and the rate at which they undergo superoxide-mediated saponification. These results were based on a correlation between the (13)C NMR chemical shift of polarizable carbonyl carbons and the E(T)(30) polarity they sense. Subsequent studies challenged these results, however, demonstrating that, in conjugated ketones and aldehydes, charge separation influences the E(T)(30) polarity measured. To elucidate whether this is true for conjugated esters such as coumarins as well, the nonconjugated analogs 3,4-dihydrocoumarins 11 and 15 were intercalated within DMPC liposomal bilayers and their relative locations within the liposomal bilayer were determined. The length of the alkyl chain substituted at C-4 and C-10 influences the depth of the substrates within the liposome. The location of these 3,4-dihydrocoumarins corresponds well with the conjugated analog coumarin 1-confirming the validity of the abovementioned results of Afri et al. The lack of substantial charge separation in the coumarin 1 system presumably results from the "swamping-out" effect of the ester oxygen. Instead of 1,3-delocalization of charge, typical of conjugated systems, delocalization of the nonbonding pair on the ester oxygen predominates.

Preparation of Tyrian purple (6,6'-dibromoindigo): past and present.

Over the past century, various synthetic approaches have been suggested to the most famous dye of antiquity, Tyrian purple (6,6'-dibromoindigo). These synthetic routes have been exhaustively surveyed and critically evaluated from the perspective of convenience, cost, safety and yield.

A simple, safe and efficient synthesis of Tyrian purple (6,6'-dibromoindigo).

6,6'-Dibromoindigo is a major component of the historic pigment Tyrian purple, arguably the most famous dye of antiquity. Over the last century, chemists have been interested in developing practical syntheses of the compound We describe herein a new, reasonably simple and efficient synthesis of Tyrian purple which opens the way to the production of large quantities of the dye with minimal hazards and at low cost.

Determining radical penetration into membranes using ESR splitting constants.

Determination of the depth of radical penetration into a lipid membrane is critical to the understanding of the role membranes play in radical attack. We have previously studied radical penetration into lipid bilayers using novel lipophilic spin traps and a combination of NMR and ESR techniques. We now focus on erythrocyte ghost (EG) membranes. Based on a correlation between ESR beta-H splitting constants (a(beta-H)) and solvent polarity, we have been able to locate stable radicals such as doxyls 2-4 and spin adducts 6-8 intercalated within liposomal bilayers and EG membranes. As a rule, the more lipophilic a spin adduct, the deeper it is found in the bilayer; however, the depth of penetration also depends on the steric bulk of the intercalant and whether intercalation is effected by sonication or diffusion, with the former more energetic and more effective. Compared to simple liposomes, the head group region of the red blood cell membrane is more rigid and lipophilic because of the presence of cholesterol. Hence, the biomembrane head group filters out possible intercalants that are not sufficiently lipophilic. Steric bulk plays less of a role in the EG system, perhaps because the cholesterol introduces a greater element of disorder, attenuating the role played by lipid-lipid interactions.

Aggregate formation in the intercalation of long-chain fatty acid esters into liposomes.

Various hydrophobic benzenediacetic esters, the corresponding benzenedipropionic esters, and branched alkyl esters were intercalated into DMPC liposomes, where the molar ratio (n/n) of ester:DMPC was 1:5. In the case of the very long-chain derivatives, double carbonyl peaks were observed in the 13C NMR spectrum. This doubling phenomenon was observed only for the carbonyl peaks, whose chemical shift is most sensitive to solvent polarity, and disappeared when the ester:DMPC molar ratio drops below 1:15. This doubling reflects the presence of two populations in these samples: one group includes those molecules which are intercalated within the liposome and feel the polarity corresponding to the liposomal microenvironment; the other consists of aggregates of these long-chain derivatives located in the extra-liposomal aqueous phase.