ABSTRACT
Organic-inorganic hybrids represent a good solution to improve the solubility and dissolution rates of poorly soluble drugs whose number has been increasing in the last few years. One of the most diffused inorganic matrices is hydroxyapatite (HAP), which is a biocompatible and osteoconductive material. However, the understanding of the hybrids' functioning mechanisms is in many cases limited; thus, thorough physicochemical characterizations are needed. In the present paper, we prepared hybrids of pure and Mg-doped hydroxyapatite with meloxicam, a drug pertaining to the Biopharmaceutical Classification System (BCS) class II, i.e., drugs with low solubility and high permeability. The hybrids' formation was demonstrated by FT-IR, which suggested electrostatic interactions between HAP and drug. The substitution of Mg in the HAP structure mainly produced a structural disorder and a reduction in crystallite sizes. The surface area of HAP increased after Mg doping from 82 to 103 m2g-1 as well as the pore volume, justifying the slightly high drug amount adsorbed by the Mg hybrid. Notwithstanding the low drug loading on the hybrids, the solubility, dissolution profiles and wettability markedly improved with respect to the drug alone, particularly for the Mg doped one, which was probably due to the main distribution of the drug on the HAP surface.
ABSTRACT
The study focuses on the synthesis and characterization of Meloxicam-halloysite nanotube (HNT) composites as a viable approach to enhance the solubility and dissolution rate of meloxicam, a poorly water-soluble drug (BCS class II). Meloxicam is loaded on commercial and modified halloysite (acidic and alkaline etching, or APTES and chitosan functionalization) via a solution method. Several techniques (XRPD, FT-IR, 13C solid-state NMR, SEM, EDS, TEM, DSC, TGA) are applied to characterize both HNTs and meloxicam-HNT systems. In all the investigated drug-clay hybrids, a high meloxicam loading of about 40 wt% is detected. The halloysite modification processes and the drug loading do not alter the structure and morphology of both meloxicam and halloysite nanotubes, which are in intimate contact in the composites. Weak drug-clay and drug-functionalizing agent interactions occur, involving the meloxicam amidic functional group. All the meloxicam-halloysite composites exhibit enhanced dissolution rates, as compared to meloxicam. The meloxicam-halloysite composite, functionalized with chitosan, showed the best performance both in water and in buffer at pH 7.5. The drug is completely released in 4-5 h in water and in less than 1 h in phosphate buffer. Notably, an equilibrium solubility of 13.7 ± 4.2 mg/L in distilled water at 21 °C is detected, and wettability dramatically increases, compared to the raw meloxicam. These promising results can be explained by the chitosan grafting on the outer surface of halloysite nanotubes, which provides increased specific surface area (100 m2/g) disposable for drug adsorption/desorption.
ABSTRACT
Poorly water-soluble drugs represent a challenge for the pharmaceutical industry because it is necessary to find properly tuned and efficient systems for their release. In this framework, organic-inorganic hybrid systems could represent a promising strategy. A largely diffused inorganic host is hydroxyapatite (HAP, Ca10(PO4)6(OH)2), which is easily synthesized with different external forms and can adsorb different kinds of molecules, thereby allowing rapid drug release. Hybrid nanocomposites of HAP nanorods, obtained through hydrothermal synthesis, were prepared with two model pharmaceutical molecules characterized by low and pH-dependent solubility: meloxicam, a non-steroidal anti-inflammatory drug, and bumetanide, a diuretic drug. Both hybrids were physically and chemically characterized through the combined use of X-ray powder diffraction, scanning electron microscopy with energy-dispersive spectroscopy, differential scanning calorimetry, and infrared spectroscopy measurements. Then, their dissolution profiles and hydrophilicity (contact angles) in different media as well as their solubility were determined and compared to the pure drugs. This hybrid system seems particularly suitable as a drug carrier for bumetanide, as it shows higher drug loading and good dissolution profiles, while is less suitable for meloxicam, an acid molecule.
ABSTRACT
BACKGROUND: To make the regenerative process more effective and efficient, tissue engineering (TE) strategies have been implemented. Three-dimensional scaffolds (electrospun or 3D-printed), due to their suitable designed architecture, offer the proper location of the position of cells, as well as cell adhesion and the deposition of the extracellular matrix. Moreover, the possibility to guarantee a concomitant release of drugs can promote tissue regeneration. METHODS: A PLA/PCL copolymer was used for the manufacturing of electrospun and hybrid scaffolds (composed of a 3D-printed support coated with electrospun fibers). Dexamethasone was loaded as an anti-inflammatory drug into the electrospun fibers, and the drug release kinetics and scaffold biological behavior were evaluated. RESULTS: The encapsulation efficiency (EE%) was higher than 80%. DXM embedding into the electrospun fibers resulted in a slowed drug release rate, and a slower release was seen in the hybrid scaffolds. The fibers maintained their nanometric dimensions (less than 800 nm) even after deposition on the 3D-printed supports. Cell adhesion and proliferation was favored in the DXM-loading hybrid scaffolds. CONCLUSIONS: The hybrid scaffolds that were developed in this study can be optimized as a versatile platform for soft tissue regeneration.
ABSTRACT
The search for effective systems to facilitate the release of poorly bioavailable drugs is a forefront topic for the pharmaceutical market. Materials constituted by inorganic matrices and drugs represent one of the latest research strategies in the development of new drug alternatives. Our aim was to obtain hybrid nanocomposites of Tenoxicam, an insoluble nonsteroidal anti-inflammatory drug, with both layered double hydroxides (LDHs) and hydroxyapatite (HAP). The physicochemical characterization on the base of X-ray powder diffraction, SEM/EDS, DSC and FT-IR measurements was useful to verify the possible hybrids formation. In both cases, the hybrids formed, but it seemed that the drug intercalation in LDH was low and, in fact, the hybrid was not effective in improving the pharmacokinetic properties of the drug alone. On the contrary, the HAP-Tenoxicam hybrid, compared to the drug alone and to a simple physical mixture, showed an excellent improvement in wettability and solubility and a very significant increase in the release rate in all the tested biorelevant fluids. It delivers the entire daily dose of 20 mg in about 10 min.
Subject(s)
Hydroxides , Nanocomposites , Spectroscopy, Fourier Transform Infrared , Hydroxides/chemistry , Nanocomposites/chemistry , HydroxyapatitesABSTRACT
Carvedilol is a poorly water-soluble drug employed to treat chronic heart failure. In this study, we synthesize new carvedilol-etched halloysite nanotubes (HNTs) composites to enhance solubility and dissolution rate. The simple and feasible impregnation method is used for carvedilol loading (30-37% weight). Both the etched HNTs (acidic HCl and H2SO4 and alkaline NaOH treatments) and the carvedilol-loaded samples are characterized by various techniques (XRPD, FT-IR, solid-state NMR, SEM, TEM, DSC, and specific surface area). The etching and loading processes do not induce structural changes. The drug and carrier particles are in intimate contact and their morphology is preserved, as demonstrated by TEM images. The 27Al and 13C solid-state NMR and FT-IR findings show that carvedilol interactions involve the external siloxane surface, especially the aliphatic carbons, the functional groups, and, by inductive effect, the adjacent aromatic carbons. All the carvedilol-halloysite composites display enhanced dissolution rate, wettability, and solubility, as compared to carvedilol. The best performances are obtained for the carvedilol-halloysite system based on HNTs etched with HCl 8M, which exhibits the highest value of specific surface area (91 m2 g-1). The composites make the drug dissolution independent of the environmental conditions of the gastrointestinal tract and its absorption less variable, more predictable, and independent from the pH of the medium.
Subject(s)
Nanotubes , Carvedilol/chemistry , Solubility , Clay , Spectroscopy, Fourier Transform Infrared , Nanotubes/chemistryABSTRACT
A challenge in the pharmaceutical sector is the development of controlled release dosage forms for oral administration of poorly soluble drugs, in particular, drugs characterized by pH-dependent solubility through the gastrointestinal tract, which itself shows wide variability in terms of environmental pHs. The best approach is to increase the dissolution rate of the drugs at the different pHs and only then modify its release behavior from the pharmaceutical form. This work aims to demonstrate the ability of properly designed polymeric nanofibers in enhancing the release rate of model drugs with different pH-dependent solubility in the different physiological pHs of the gastrointestinal tract. Polymeric nanofibers loaded with meloxicam and carvedilol were prepared using the electrospinning technique and were then included in properly designed tablet formulations to obtain fast or sustained release dosage forms. The nanofibers and the tablets were characterized for their morphological, physico-chemical and dissolution properties. The tablets are able to deliver the dose according to the expected release behavior, and zero-order, first-order, Higuchi, Korsmeyer-Peppas and Hixon-Crowell kinetics models were used to analyze the prevailing release mechanism of the tablets. This study shows that the electrospun fibers can be advantageously included in oral dosage forms to improve their release performances.
ABSTRACT
N-acetylcysteine is the acetylated form of the amino acid L-cysteine and a precursor to glutathione (GSH). It has been known for a long time as a powerful antioxidant and as an antidote for paracetamol overdose. However, other activities related to this molecule have been discovered over the years, making it a promising drug for diseases such as cystic fibrosis (CF). Its antioxidant activity plays a key role in CF airway inflammation and redox imbalance. Furthermore, this molecule appears to play an important role in the prevention and eradication of biofilms resulting from CF airway infections, in particular that of Pseudomonas aeruginosa. The aim of this review is to provide an overview of CF and the role that NAC could play in preventing and eliminating biofilms, as a modulator of inflammation and as an antioxidant, restoring the redox balance within the airways in CF patients. To do this, NAC can act alone, but it can also be used as an adjuvant molecule to known drugs (antibiotics/anti-inflammatories) to increase their activity.
ABSTRACT
Background: Furosemide is a potent diuretic drug widely used to treat congestive heart failure in dogs and cats, but it shows remarkable variability in bioavailability and efficacy when administered orally. In particular, a different diuretic effect can be detected after repeated administrations of the same medicinal product in the same animal. For this reason, we investigate the possible reasons for this peculiar behavior. Drug products for veterinary andhuman use are compared in terms of variability for tablet splitting, in vitro dissolution profiles (in different fluids that could simulate the gastrointestinal environment of pets), and drug distribution uniformity. Aim: To study the in vitro performances of drug products in terms of variability. Methods: Five veterinary products and five products for human use, containing different furosemide doses, are characterized. Tablets splitting uniformity, in vitro dissolution profiles in different fluids that could simulate the gastrointestinal environment of the different species, and drug content distribution, were tested. Results: The in vitro dissolution profiles of the different medicines are comparable but confirm a different dissolution rate as a function of the medium pH and volume. Many of the products considered show wide variability in the division performances of the scored tablets, and this problem could lead to the detected fluctuations in the diuretic effect. The four-leaf clover shape of a veterinary product appears to give rise to more uniform fractions. A uniform distribution of the drug in the tablets and their fractions is confirmed for all the products considered. Conclusion: The possibility of tablets splitting allows considerable dosage flexibility, but a non-uniform break of the tablets to obtain the dosage suitable for the pet's weight, can cause dangerous over-or sub-dosing condition, especially in critical pathologies and in small breed pets.
Subject(s)
Cat Diseases , Dog Diseases , Veterinary Drugs , Animals , Cats , Dogs , Furosemide , TabletsABSTRACT
The Zaltoprofen/4,4'-Bipyridine system gives rise to two co-crystals of different compositions both endowed - in water and in buffer solution at pH 4.5 - with considerably higher solubility and dissolution rate than the pure drug. The qualitative and quantitative analysis of the DSC measurements, carried out on samples made up of mixtures prepared according to different methodologies, allows us to elaborate and propose an accurate thermodynamic model that fully takes into account the qualitative aspects of the complex experimental framework and which provides quantitative predictions (reaction enthalpies and compositions of the co-crystals) in excellent agreement with the experimental results. Co-crystal formation and cocrystal compositions were confirmed by X-ray diffraction measurements as well as by FT-IR and NMR spectroscopy measurements. The quantitative processing of DSC measurements rationalizes and deepens the scientific aspects underlying the so-called Tammann's triangle and constitutes a model of general validity. The work shows that DSC has enormous potential, which however can be fully exploited only by paying adequate attention to the experimental aspects and the quantitative processing of the measurements.
Subject(s)
Pharmaceutical Preparations , Benzopyrans , Calorimetry, Differential Scanning , Crystallization , Powder Diffraction , Propionates , Pyridines , Solubility , Spectroscopy, Fourier Transform Infrared , X-Ray DiffractionABSTRACT
An electrospinning process was optimized to produce fibers of micrometric size with different combinations of polymeric and surfactant materials to promote the dissolution rate of an insoluble drug: firocoxib. Scanning Electron Microscopy (SEM) showed that only some combinations of the proposed carrier systems allowed the production of suitable fibers and further fine optimization of the technique is also needed to load the drug. Differential scanning calorimetry (DSC) and X-ray powder diffraction (XRPD) suggest that the drug is in an amorphous state in the final product. Drug amorphization, the fine dispersion of the active in the carriers, and the large surface area exposed to water interaction obtained through the electrospinning process can explain the remarkable improvement in the dissolution performance of firocoxib from the final product developed.
Subject(s)
4-Butyrolactone/analogs & derivatives , Cyclooxygenase 2 Inhibitors/administration & dosage , Cyclooxygenase 2 Inhibitors/chemistry , Drug Carriers , Nanofibers , Polymers , Sulfones/administration & dosage , Sulfones/chemistry , Surface-Active Agents , 4-Butyrolactone/administration & dosage , 4-Butyrolactone/chemistry , Drug Carriers/chemistry , Nanofibers/chemistry , Nanofibers/ultrastructure , Polymers/chemistry , Solubility , Spectroscopy, Fourier Transform Infrared , Surface-Active Agents/chemistry , ThermodynamicsABSTRACT
The aim of this study was to synthetize cocrystals of nateglinide, an antidiabetic agent of biopharmaceutics classification system Class IIa, as a strategy to improve both the solubility and the dissolution rate of the drug. Benzamide was selected by a screening procedure as a suitable coformer, and binary mixtures with different compositions were prepared and analyzed by differential scanning calorimetry (DSC). An in-depth analysis of DSC data allowed obtaining both the eutectic mixture and cocrystal compositions. The rationale of such an analysis was highlighted and explained. Cocrystals were prepared by kneading and solvent evaporation. Their formation was proved by DSC and confirmed by X-ray powder diffraction, solid-state nuclear magnetic resonance, and Fourier-transform infrared spectroscopy. The functional groups involved in the interaction leading to cocrystals formation were investigated by spectroscopic techniques. The in vitro dissolution profiles show that cocrystals have definite better pharmaceutical performances than the pure drug.
Subject(s)
Calorimetry, Differential Scanning , Chemistry, Pharmaceutical/methods , Hypoglycemic Agents/pharmacokinetics , Nateglinide/pharmacokinetics , Administration, Oral , Drug Liberation , Hydrogen-Ion Concentration , Hypoglycemic Agents/analysis , Hypoglycemic Agents/chemistry , Nateglinide/analysis , Nateglinide/chemistry , Powder Diffraction , Solubility , Spectroscopy, Fourier Transform Infrared , X-Ray DiffractionABSTRACT
OBJECTIVE: To improve the pharmaceutical behavior of the oral antidiabetic agent gliclazide through the synthesis of multicomponent crystals with tromethamine. METHODS: Multicomponent crystals were prepared by solvent evaporation method, kneading, and combining mechanical and thermal activation. DSC, FT-IR spectroscopy, X-ray diffraction, SEM-EDS, and SSNMR were used to investigate their formation. Measurements of solubility and dissolution rate were carried out for the pharmaceutical characterization. RESULTS: The formation of multicomponent crystals of gliclazide and tromethamine was confirmed by all the techniques. In particular, FT-IR and NMR measurements revealed that the interaction between drug and coformer leads to significant changes of the hydrogen bond scheme, and that almost all the functional groups of the two molecules are involved. The dissolution profile of the new phase is significantly better than that of both pure gliclazide and of the reference commercial product Diabrezide®. CONCLUSIONS: The new system shows an improved pharmaceutical behavior and could be formulated in a dosage form to obtain a rapid and complete release of the drug available for absorption.
Subject(s)
Gliclazide/chemistry , Technology, Pharmaceutical/methods , Tromethamine/chemistry , Calorimetry, Differential Scanning , Crystallography, X-Ray , Differential Thermal Analysis , Drug Liberation , Microscopy, Electron, Scanning , Particle Size , Powder Diffraction , Spectroscopy, Fourier Transform InfraredABSTRACT
The development of efficient strategies for drug delivery is considerably desired. Indeed, often several issues such as the drug solubility, the control of the drug release rate, the targeted delivery of drugs, the drug bioavailability, and the minimization of secondary effects still present great obstacles. Different methodologies have been proposed, but the use of nano-hybrids compounds that combine organic and inorganic substances seems particularly promising. An interesting inorganic host is the layered double hydroxide (LDH) with a sheets structure and formula [M2+1-x M3+x (OH)2](An-)x/n yH2O (M2+ = Zn, Mg; M3+ = Al; An- = nitrates, carbonates, chlorides). The possibility to exchange these counterions with drug molecules makes these systems ideal candidates for the drug delivery. In this article, we synthesize by co-precipitation method the hybrid compound Carprofen-Zn2Al-LDH. Carprofen, a poorly soluble anti-inflammatory drug, could also benefit of the association with a natural antacid such as LDH, to reduce the gastric irritation after its administration. Through X-ray diffraction and Fourier-transformed infrared spectroscopy (FT-IR), we could verify the effective drug intercalation into LDH. The dissolution tests clearly demonstrate a significant improvement of the drug release rate when carprofen is in the form of hybrid compound.
Subject(s)
Aluminum Hydroxide/chemistry , Carbazoles/chemistry , Hydroxides/chemistry , Drug Delivery Systems/methods , Drug Liberation , Nanoparticles/chemistry , Solubility , Spectroscopy, Fourier Transform Infrared/methods , X-Ray Diffraction/methodsABSTRACT
The purpose of this investigation is to determine how the dissolution media may influence the release rate of an insoluble drug in in vitro conditions. Some oral dosage forms containing ibuprofen, a molecule that shows pH-dependent solubility, are tested. They are evaluated in different media to simulate the gastrointestinal transit at paddle rotation speeds of 50 and 100 rpm. Moreover, the potential effect of different ethanol concentrations on drug release is tested. The dissolution profiles of the tablets show a similar behavior in water (pH 1.0) and phosphate buffer (pH 4.5) where the 2 doses are not completely dissolved. The soft capsules show a different behavior: a certain amount of ibuprofen, which is in solution inside the capsule, reprecipitates in water and in the pH 4.5 buffer. Instead, ibuprofen dissolves rapidly in the pH 6.8 buffer from all the formulations. In the water-ethanol solutions, the dissolution curves show a valuable increase in the drug dissolved at higher ethanol concentrations.
Subject(s)
Ethanol/chemistry , Pharmaceutical Preparations/chemistry , Capsules/chemistry , Chemistry, Pharmaceutical/methods , Drug Compounding/methods , Drug Liberation/drug effects , Hydrogen-Ion Concentration , Ibuprofen/chemistry , Solubility/drug effects , Tablets/chemistry , Water/chemistryABSTRACT
Solubility represents an important challenge for formulation of drugs, because the therapeutic efficacy of a drug depends on the bioavailability and ultimately on its solubility. Low aqueous solubility is one of the main issues related with formulation design and development of new molecules. Many drug molecules present bioavailability problems due to their poor solubility. For this reason there is a great interest in the development of new carrier systems able to enhance the dissolution of poorly water-soluble drugs. In this work, fibers containing an insoluble model drug and prepared by an electrospinning method, are proposed and evaluated to solve this problem. Two hydrophilic polymers, polyvinylpyrrolidone (Plasdone® K29/32) and polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (Soluplus®) were used to increase the water solubility of perphenazine. The physico-chemical characterization suggests that the drug loaded in the fibers is in the amorphous state. Both polymeric carriers are effective to promote the drug dissolution rate in water, where this active pharmaceutical ingredient is insoluble, due to the fine dispersion of the drug into the polymeric matrices, obtained with this production technique. In fact, the dissolution profiles of the fibers, compared to the simple physical mixture of the two components, and to the reference commercial product Trilafon® 8mg tablets, show that a strong enhancement of the drug dissolution rate can be achieved with the electrospinning technique.