ABSTRACT
In order to develop a diaphragm-type ventricular assist device (VAD), we studied the flow field change following structural modifications. We devised a center flow-type pump by putting a small projection on the center of the housing and/or diaphragm to provide a center in the flow field, and examined the following four types of VADs: N type without a projection, D type with a projection on the diaphragm, H type with a projection on the housing, and DH type with projections on both the diaphragm and housing. Computational fluid dynamics (CFD) was used for flow simulation. Particle image velocimetry (PIV) was also used to verify the reliability of the CFD method and to determine how the flow field changes in the presence of a projection. The results of the PIV and CFD analyses were comparable. The placement of a projection on the housing was most effective in rectifying the flow field.
Subject(s)
Computer Simulation , Heart-Assist Devices , Hemorheology , Image Processing, Computer-Assisted , Models, Cardiovascular , Numerical Analysis, Computer-Assisted , Equipment Design , Materials Testing , Reproducibility of ResultsABSTRACT
We developed a small, lightweight, low-cost implantable ventricular assist device (VAD) for use in smaller Japanese subjects. The major advantage of this pump is the simplicity of its fabrication. Most parts of the pump were shaped from a transparent acrylic block by a turning process, and the diaphragm was made from a silicon sheet. Since this method of construction did not require any complex processes, we could manufacture many pumps of various shapes. We determined the -most efficient shape for the Ebacor VAD using the flow visualization technique. The pump showed an output above 6 liters/min under a driving pressure of 300/-100 mmHg. The pump performance of current VADs is superior to that of the Ebacor VAD, because these pumps are larger. Since the Ebacor VAD is small in size, it can be driven by the driving system of a normal IABP control unit, which many hospitals already have in place. During a 30-day continuous driving performance test of this pump, no problems like performance decrements or water and air leakage were observed.
Subject(s)
Heart-Assist Devices , Humans , Intra-Aortic Balloon Pumping/instrumentation , Ventricular Function/physiologyABSTRACT
A computer simulation was carried out to investigate the influence of nonpulsatile left ventricular assistance on hemodynamics. A simulation circuit was constructed to represent the circulatory system. A source of current was added to denote the nonpulsatile blood pump. The left and right ventricles were replaced by variable compliances. Left heart failure was simulated by decreasing the amount of compliance change of the left ventricle. We introduced a pulsatility indicator (PI) to clarify the pulsatility characteristics in the hemodynamics; this PI was defined as the ratio of the pulse pressure (PP) to the mean aortic pressure (AoP). When nonpulsatile bypass flow increased, the mean AoP, tension time index (TTI), and diastolic pressure time index (DPTI) increased, and cardiac output, PP, and PI decreased. When assisted flow increased with the constant total flow rate, the mean AoP and DPTI changed little; the PP, TTI, and PI decreased, and the endocardial viability rate increased. The PI would be helpful in evaluating the effect of pulsatility.
