Hydrogenation of silicon-nanocrystals-embedded silicon oxide passivating contacts.

We investigate the effect of hydrogen passivation of dangling bonds in silicon oxide passivating contacts with embedded silicon nanocrystals (NAnocrystalline Transport path in Ultra-thin dielectrics for REinforced passivation contact, NATURE contact). We first investigated the differences in electrical properties of the samples after hydrogen gas annealing and hydrogen plasma treatment (HPT). The results show that the NATURE contact was efficiently passivated by hydrogen after HPT owing to the introduction of hydrogen radicals into the structure. Furthermore, we examined the dependence of process parameters such as HPT temperature, duration, and H2pressure, on the electrical properties and hydrogen depth profiles. As a result, HPT at 500 °C, 15 min, and 0.5 Torr resulted in a large amount of hydrogen inside the NATURE contact and the highest implied open-circuit voltage of 724 mV. Contact resistivity and surface roughness hardly increased when HPT was performed under the optimized condition, which only improved the passivation performance without deteriorating the electron transport properties of the NATURE contact.

Fast ortho-to-para conversion of molecular hydrogen in chemisorption and matrix-isolation systems.

Molecular hydrogen has two nuclear-spin modifications called ortho and para. Because of the symmetry restriction with respect to permutation of the two protons, the ortho and para isomers take only odd and even values of the rotational quantum number, respectively. The ortho-to-para conversion is promoted in condensed systems, to which the excess rotational energy and spin angular momentum are transferred. We review recent studies on fast ortho-to-para conversion of hydrogen in molecular chemisorption and matrix isolation systems, discussing the conversion mechanism as well as rotational-relaxation pathways.

Optical and spin-selective time-of-flight measurement of light-induced desorption of Rb from Fe[Formula: see text]O[Formula: see text] surfaces.

Light-induced desorption of Rb atoms from a ferrimagnetic Fe[Formula: see text]O[Formula: see text](001) surface was studied using a spin-selective optical method, which provides information on the spin polarization, velocity distribution, and amount of the desorbed atoms. The results showed that the intensity of the desorption of Rb from Fe[Formula: see text]O[Formula: see text](001) induced by ultraviolet (UV) light irradiation was smaller than the detection limit at coverages lower than the threshold coverage at which the desorption rate began to increase. Moreover, the average magnetic quantum number of the desorbed atoms was smaller than that of electrons at the Fermi level of the Fe[Formula: see text]O[Formula: see text](001) surface. These indicate that the light-induced desorption of Rb from an Fe[Formula: see text]O[Formula: see text](001) surface occurs only in the high-coverage region in which the desorbing atoms are not in contact with the Fe[Formula: see text]O[Formula: see text] surface, and that the desorption does not involve spin transfer.

Dynamic Behavior of Intermediate Adsorbates to Control Activity and Product Selectivity in Heterogeneous Catalysis: Methanol Decomposition on Pt/TiO2(110).

Dynamic behavior of intermediate adsorbates, such as diffusion, spillover, and reverse spillover, has a strong influence on the catalytic performance in oxide-supported metal catalysts. However, it is challenging to elucidate how the intermediate adsorbates move on the catalyst surface and find active sites to give the corresponding products. In this study, the effect of the dynamic behavior of methoxy intermediate on methanol decomposition on a Pt/TiO2(110) surface has been clarified by combination of scanning tunneling microscopy (STM), temperature-programmed desorption (TPD), and density functional theory (DFT) calculations. The methoxy intermediates were formed by the dissociative adsorption of methanol molecules on Pt nanoparticles at room temperature followed by spillover to the TiO2(110) support surface. TPD results showed that the methoxy intermediates were thermally decomposed at >350 K on the Pt sites to produce CO (dehydrogenation) and CH4 (C-O bond scission). A decrease of the Pt nanoparticle density lowered the activity for the decomposition reaction and increased the selectivity toward CH4, which indicates that the reaction is controlled by diffusion and reverse spillover of the methoxy intermediates. Time-lapse STM imaging and DFT calculations revealed that the methoxy intermediates migrate on the five-fold coordinated Ti (Ti5c) sites along the [001] or [11¯0] direction with the aid of hydrogen adatoms bonded to the bridging oxygens (Obr) and can move over the entire surface to seek and find active Pt sites. This work offers an in-depth understanding of the important role of intermediate adsorbate migration in the control of the catalytic performance in oxide-supported metal catalysts.

Rotational-Energy Transfer in H2 Ortho-Para Conversion on a Metal Surface: Interplay between Electron and Phonon Systems.

Clarifying energy transfer processes in molecular adsorption on solid surfaces is essential to understand the gas-surface interaction. Unlike the vibrational-energy transfer processes, which are thought to be well understood in detail, the rotational-energy transfer process still remains unclear. Considering the interconversion between ortho and para states of H2 is accompanied by the nuclear spin flip and the rotational-energy transfer, the surface-temperature dependence of the ortho-to-para conversion of molecularly chemisorbed H2 on Pd(210) is studied. The conversion rate is accelerated with an increase in surface temperature. Based on the conversion model proposed for metal surfaces, we analyze the temperature dependence of the conversion rate, taking into account both electron and phonon systems of the substrate. The rotational-energy transfer is most likely mediated by surface electrons with the assistance of the substrate phonons.

Long and oriented graphene nanoribbon synthesis from well-ordered 10,10'-dibromo-9,9'-bianthracene monolayer on crystalline Au surfaces.

Bottom-up synthesis on metal surfaces has attracted attention for the fabrication of graphene nanoribbons (GNRs) with atomically-precise chemical structures to realize novel electronic devices. However, control of length and orientation on surfaces during GNR synthesis is difficult, thus, achieving longer and aligned GNR growth is a significant challenge. Herein, we report GNR synthesis from a well-ordered dense monolayer on Au crystalline surfaces for long and oriented GNR growth. Scanning tunneling microscopy showed that 10,10'-dibromo-9,9'-bianthracene (DBBA) precursors deposited on Au(111) at room temperature self-assembled into a well-ordered dense monolayer, and the straight molecular wire structure was formed where Br atoms in each precursor were adjacent along the wire axis. The DBBAs in the monolayer were found to be hardly desorbed from the surface under subsequent heating and efficiently polymerize along with the molecular arrangement, resulting in more long and oriented GNR growth compared to the conventional growth method. The result is attributed to be suppression of random diffusion and desorption of the DBBAs on the Au surface during polymerization due to the densely-packed DBBA structure. Additionally, an investigation of the effect of the Au crystalline plane on the GNR growth revealed further anisotropic GNR growth on Au(100) compared to Au(111) due to the stronger interactions of DBBA with Au(100). These findings provide fundamental knowledge for controlling GNR growth from a well-ordered precursor monolayer to achieve more long and oriented GNRs.

Selective Epitaxial Growth of Ca2NH and CaNH Thin Films by Reactive Magnetron Sputtering under Hydrogen Partial Pressure Control.

Calcium compounds with N and H are promising catalysts for NH3 conversion, and their epitaxial thin films provide a platform to quantitatively understand the catalytic activities. Here we report the selective epitaxial growth of Ca2NH and CaNH thin films by controlling the hydrogen partial pressure (PH2) during reactive magnetron sputtering. We find that the hydrogen charge states can be tuned by PH2: Ca2NH containing H- is formed at PH2 < 0.04 Pa, while CaNH containing H+ is formed at PH2 > 0.04 Pa. In situ plasma emission spectroscopy reveals that the intensity of the Ca atomic emission (∼422 nm) decreases as PH2 increases, suggesting that Ca reacts with H2 and N2 to form Ca2NH at lower PH2, whereas at higher PH2, CaHx is first formed on the target surface and then sputtered to produce CaNH. This study provides a novel route to control the hydrogen charge states in Ca-N-H epitaxial thin films.

Efficient Hydrogen Isotope Separation by Tunneling Effect Using Graphene-Based Heterogeneous Electrocatalysts in Electrochemical Hydrogen Isotope Pumping.

The fabrication of a hydrogen isotope enrichment system is essential for the development of industrial, medical, life science, and nuclear fusion fields, and therefore, efficient enrichment techniques with a high separation factor and economic feasibility are still being explored. Herein, we report a hydrogen/deuterium (H/D) separation ability with polymer electrolyte membrane electrochemical hydrogen pumping (PEM-ECHP) using a heterogeneous electrode consisting of palladium and graphene layers (PdGr). By mass spectroscopic analysis, we demonstrate significant bias voltage dependence of the H/D separation factor with a maximum of ∼25 at 0.15 V and room temperature, which is superior to those of conventional separation methods. Theoretical analysis demonstrated that the observed high H/D factor stems from tunneling of hydrogen isotopes through atomically thick graphene during the electrochemical reaction and that the bias dependence of H/D results from a transition from the quantum tunneling regime to the classical overbarrier regime for hydrogen isotopes transfer through the graphene. These findings will help us understand the origin of the isotope separation ability of graphene discussed so far and contribute to developing an economical hydrogen isotope enrichment system using two-dimensional materials.

Revealing the Role of Hydrogen in Electron-Doping Mottronics for Strongly Correlated Vanadium Dioxide.

Hydrogen-associated electron-doping Mottronics for d-band correlated oxides (e.g., VO2) opens up a new paradigm to regulate the electronic functionality via directly manipulating the orbital configuration and occupancy. Nevertheless, the role of hydrogen in the Mottronic transition of VO2 is yet unclear because opposite orbital reconfigurations toward either the metallic or highly insulating states were both reported. Herein, we demonstrate the root cause for such hydrogen-induced multiple electronic phase transitions by 1H quantification using nuclear reaction analysis. A low hydrogenation temperature is demonstrated to be vital in achieving a large hydrogen concentration (nH ≈ 1022 cm-3) that further enhances the t2g orbital occupancy to trigger electron localizations. In contrast, elevating the hydrogenation temperatures surprisingly reduces nH to ∼1021 cm-3 but forms more stable metallic H0.06VO2. This leads to the recognition of a weaker hydrogen interaction that triggers electron localization within VO2 via Mottronically enhancing the orbital occupancies.

Blackening of titanium dioxide nanoparticles by atomic hydrogen and the effect of coexistence of water on the blackening.

A fast blackening process of titanium dioxide nanoparticles by exposing to atomic hydrogen was studied by estimating the color of the nanoparticles. The whiteness of TiO2 decreased exponentially with time, which suggests a first-order reaction between atomic H and surface oxygen, whose rate constant is proportional to the ambient pressure of H2. The rate constant increases as the temperature of nanoparticles at exposing to atomic hydrogen. The structure and size of nanoparticles were estimated by the X-ray diffraction (XRD), which shows that a part of anatase transferred to rutile and the crystal sizes of both anatase and rutile increased by hydrogenation above 600 K. The blackening of TiO2 halfway stopped under the condition of the similar partial pressure of water with hydrogen. This suggests the presence of reverse reaction between H2O and oxygen vacancy, whose reaction rate constant is proportional to the partial pressure of H2O.

Dynamical Quantum Filtering via Enhanced Scattering of para-H2 on the Orientationally Anisotropic Potential of SrTiO3(001).

Quantum dynamics calculation, performed on top of density functional theory (DFT)-based total energy calculations, show dynamical quantum filtering via enhanced scattering of para-H2 on SrTiO3(001). We attribute this to the strongly orientation-dependent (electrostatic) interaction potential between the H2 (induced) quadrupole moment and the surface electric field gradient of ionic SrTiO3(001). These results suggest that ionic surfaces could function as a scattering/filtering media to realize rotationally state-resolved H2. This could find significant applications not only in H2 storage and transport, but also in realizing materials with pre-determined characteristic properties.

Hydrogenation and hydrogen diffusion at the anatase TiO2(101) surface.

Hydrogenation of TiO2 enhances its visible photoabsorption, leading to efficient photocatalytic activity. However, the role of hydrogen has not been fully understood. The anatase TiO2(101) surface treated by hydrogen ion irradiation at 500 eV was investigated by photoemission spectroscopy and nuclear reaction analysis. Hydrogen irradiation induces an in-gap state 1-1.6 eV below the Fermi level and a downward band bending of 0.27 eV. The H depth profile at 300 K shows a surface peak with an H amount of (2.9 ± 0.3) × 1015 cm-2 with little concentration in a deeper region. At 200 K, on the other hand, the H depth profile shows a maximum at about 1 nm below the surface corresponding to an H amount of (6.1 ± 0.3) × 1015 cm-2 along with a broad distribution extending to 50 nm at an average concentration of 0.8 at. %. These results show that H diffusion in anatase TiO2 is much faster than in rutile TiO2 [Y. Ohashi, J. Phys. Chem. C 123, 10319-10324 (2019)]. The H diffusion coefficient at 200 K is determined to be 2.7 ± 0.1 × 10-13 m2 s-1.

New assay method based on Raman spectroscopy for enzymes reacting with gaseous substrates.

Enzyme activity is typically assayed by quantitatively measuring the initial and final concentrations of the substrates and/or products over a defined time period. For enzymatic reactions involving gaseous substrates, the substrate concentrations can be estimated either directly by gas chromatography or mass spectrometry, or indirectly by absorption spectroscopy, if the catalytic reactions involve electron transfer with electron mediators that exhibit redox-dependent spectral changes. We have developed a new assay system for measuring the time course of enzymatic reactions involving gaseous substrates based on Raman spectroscopy. This system permits continuous monitoring of the gas composition in the reaction cuvette in a non-invasive manner over a prolonged time period. We have applied this system to the kinetic study of the [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F. This enzyme physiologically catalyzes the reversible oxidation of H2 and also possesses the nonphysiological functions of H/D exchange and nuclear spin isomer conversion reactions. The proposed system has the additional advantage of enabling us to measure all of the hydrogenase-mediated reactions simultaneously. Using the proposed system, we confirmed that H2 (the fully exchanged product) is concomitantly produced alongside HD by the H/D exchange reaction in the D2 /H2 O system. Based on a kinetic model, the ratio of the rate constants of the H/D exchange reaction (k) at the active site and product release rate (kout ) was estimated to be 1.9 ± 0.2. The proposed assay method based on Raman spectroscopy can be applied to the investigation of other enzymes involving gaseous substrates.

Acceleration of hydrogen absorption by palladium through surface alloying with gold.

Enhancement of hydrogen (H) absorption kinetics improves the performance of hydrogen-purifying membranes and hydrogen-storage materials, which is necessary for utilizing hydrogen as a carbon-free energy carrier. Pd-Au alloys are known to show higher hydrogen solubility than pure Pd. However, the effect of Au on the hydrogen penetration from the surface into the subsurface region has not been clarified so far. Here, we investigate the hydrogen absorption at Pd-Au surface alloys on Pd(110) by means of thermal desorption spectroscopy (TDS) and hydrogen depth profiling with nuclear reaction analysis (NRA). We demonstrate that alloying the Pd(110) surface with submonolayer amounts of Au dramatically accelerates the hydrogen absorption. The degree of acceleration shows a volcano-shaped form against Au coverage. This kinetic enhancement is explained by a reduced penetration barrier mainly caused by a destabilization of chemisorbed surface hydrogen, which is supported by density-functional-theory (DFT) calculations. The destabilization of chemisorbed surface hydrogen is attributed to the change of the surface electronic states as observed by angle-resolved photoemission spectroscopy (ARPES). If generalized, these discoveries may lead to improving and controlling the hydrogen transport across the surfaces of hydrogen-absorbing materials.

Toward an Understanding of Selective Alkyne Hydrogenation on Ceria: On the Impact of O Vacancies on H2 Interaction with CeO2(111).

Ceria (CeO2) has recently been found to be a promising catalyst in the selective hydrogenation of alkynes to alkenes. This reaction occurs primarily on highly dispersed metal catalysts, but rarely on oxide surfaces. The origin of the outstanding activity and selectivity observed on CeO2 remains unclear. In this work, we show that one key aspect of the hydrogenation reaction-the interaction of hydrogen with the oxide-depends strongly on the presence of O vacancies within CeO2. Through infrared reflection absorption spectroscopy on well-ordered CeO2(111) thin films and density functional theory (DFT) calculations, we show that the preferred heterolytic dissociation of molecular hydrogen on CeO2(111) requires H2 pressures in the mbar regime. Hydrogen depth profiling with nuclear reaction analysis indicates that H species stay on the surface of stoichiometric CeO2(111) films, whereas H incorporates as a volatile species into the volume of partially reduced CeO2-x(111) thin films (x ∼ 1.8-1.9). Complementary DFT calculations demonstrate that oxygen vacancies facilitate H incorporation below the surface and that they are the key to the stabilization of hydridic H species in the volume of reduced ceria.

Asymmetric and symmetric absorption peaks observed in infrared spectra of CO2 adsorbed on TiO2 nanotubes.

Infrared spectra of CO2 physisorbed on titania nanotubes (TiNTs), predominantly in the anatase polymorph, were measured at 81 K. Asymmetric and symmetric absorption peaks due to the antisymmetric stretch vibration (ν3) of CO2 were observed at 2340 cm(-1) and 2350 cm(-1), respectively. On the basis of the exposure- and time-dependence of the spectrum, the 2340 cm(-1) peak was attributed to CO2 at the defective sites related to subsurface O vacancies (Vos) while the 2350 cm(-1) peak was assigned to that at the fivefold coordinated Ti(4+) sites. It was found that the generalized Fano line shape was well fitted to the 2340 cm(-1) peak. We also observed an absorption peak at 2372 cm(-1), which was attributed to the combination band of ν3 and the external mode of CO2 at Ti(4+).

Quantification of Hydrogen Concentrations in Surface and Interface Layers and Bulk Materials through Depth Profiling with Nuclear Reaction Analysis.

Nuclear reaction analysis (NRA) via the resonant (1)H((15)N,αγ)(12)C reaction is a highly effective method of depth profiling that quantitatively and non-destructively reveals the hydrogen density distribution at surfaces, at interfaces, and in the volume of solid materials with high depth resolution. The technique applies a (15)N ion beam of 6.385 MeV provided by an electrostatic accelerator and specifically detects the (1)H isotope in depths up to about 2 µm from the target surface. Surface H coverages are measured with a sensitivity in the order of ~10(13) cm(-2) (~1% of a typical atomic monolayer density) and H volume concentrations with a detection limit of ~10(18) cm(-3) (~100 at. ppm). The near-surface depth resolution is 2-5 nm for surface-normal (15)N ion incidence onto the target and can be enhanced to values below 1 nm for very flat targets by adopting a surface-grazing incidence geometry. The method is versatile and readily applied to any high vacuum compatible homogeneous material with a smooth surface (no pores). Electrically conductive targets usually tolerate the ion beam irradiation with negligible degradation. Hydrogen quantitation and correct depth analysis require knowledge of the elementary composition (besides hydrogen) and mass density of the target material. Especially in combination with ultra-high vacuum methods for in-situ target preparation and characterization, (1)H((15)N,αγ)(12)C NRA is ideally suited for hydrogen analysis at atomically controlled surfaces and nanostructured interfaces. We exemplarily demonstrate here the application of (15)N NRA at the MALT Tandem accelerator facility of the University of Tokyo to (1) quantitatively measure the surface coverage and the bulk concentration of hydrogen in the near-surface region of a H2 exposed Pd(110) single crystal, and (2) to determine the depth location and layer density of hydrogen near the interfaces of thin SiO2 films on Si(100).

Effects of rotational-symmetry breaking on physisorption of ortho- and para-H2 on Ag(111).

Quantum-state-selective thermal desorption of H2 weakly physisorbed on Ag(111) demonstrates significantly different desorption features between the nuclear-spin modifications. An energy shift due to the rotational-symmetry breaking induced by an anisotropic interaction affects not only the enthalpy but also the entropy of adsorption. The preexponential factor for desorption of the ortho-H2 is about three times as large as that of the para-H2. The entropy difference indicates a perpendicular orientation preference of anisotropic physisorption potential, which also suggests the importance of partial hybridization interaction for weak physisorption.

Novel insight into the hydrogen absorption mechanism at the Pd(110) surface.

The microscopic mechanism of low-temperature (80 K < T < 160 K) hydrogen (H) ingress into the H2 (<2.66 × 10(-3) Pa) exposed Pd(110) surface is explored by H depth profiling with (15)N nuclear reaction analysis (NRA) and thermal desorption spectroscopy (TDS) with isotope (H, D) labeled surface hydrogen. NRA and TDS reveal two types of absorbed hydrogen states of distinctly different depth distributions. Between 80 K and ∼145 K a near-surface hydride phase evolving as the TDS α1 feature at 160 K forms, which initially extends only several nanometers into depth. On the other hand, a bulk-absorbed hydrogen state develops between 80 K and ∼160 K which gives rise to a characteristic α3 TDS feature above 190 K. These two absorbed states are populated at spatially separated surface entrance channels. The near-surface hydride is populated through rapid penetration at minority sites (presumably defects) while the bulk-absorbed state forms at regular terraces with much lower probability per site. In both cases, absorption of gas phase hydrogen transfers pre-adsorbed hydrogen atoms below the surface and replaces them at the chemisorption sites by post-dosed hydrogen in a process that requires much less activation energy (<100 meV) than monatomic diffusion of chemisorbed H atoms into subsurface sites. This small energy barrier suggests that the rate-determining step of the absorption process is either H2 dissociation on the H-saturated Pd surface or a concerted penetration mechanism, where excess H atoms weakly bound to energetically less favorable adsorption sites stabilize themselves in the chemisorption wells while pre-chemisorbed H atoms simultaneously transit into the subsurface. The peculiarity of absorption at regular Pd(110) terraces in comparison to Pd(111) and Pd(100) is discussed.