ABSTRACT
With the wide applications of the Internet of Things (IoT) in smart home systems, IEEE 802.11n Wireless Local Area Networks (WLANs) have become a frequently chosen communication technology due to their adaptability and affordability. In a high-density network of devices such as the smart home scenerio, a host often meets interferences from other devices and unequal Received Signal Strength (RSS) from Access Points (APs). This results in throughput unfairness/insufficiency problems between hosts communicating concurrently in WLAN. Previously, we have studied the throughput request satisfaction method to address this problem. It calculates the target throughput from measured single and concurrent throughputs of hosts and controls the actual throughput at this target one by applying traffic shaping at the AP. However, the insufficiency problem of maximizing the throughput is not solved due to interferences from other hosts. In this paper, we present an extension of the throughput request satisfaction method to maximize the throughput of a high-priority host under concurrent communications. It recalculates the target throughput to increase the actual throughput as much as possible while the other hosts satisfy the least throughput. For evaluations, we conduct experiments using the test-bed system with Raspberry Pi as the AP devices in several topologies in indoor environments. The results confirm the effectiveness of our proposal.
ABSTRACT
Outdoor Location-Based Augmented Reality (LAR) applications require precise positioning for seamless integrations of virtual content into immersive experiences. However, common solutions in outdoor LAR applications rely on traditional smartphone sensor fusion methods, such as the Global Positioning System (GPS) and compasses, which often lack the accuracy needed for precise AR content alignments. In this paper, we introduce an innovative approach to enhance LAR anchor precision in outdoor environments. We leveraged Visual Simultaneous Localization and Mapping (VSLAM) technology, in combination with innovative cloud-based methodologies, and harnessed the extensive visual reference database of Google Street View (GSV), to address the accuracy limitation problems. For the evaluation, 10 Point of Interest (POI) locations were used as anchor point coordinates in the experiments. We compared the accuracies between our approach and the common sensor fusion LAR solution comprehensively involving accuracy benchmarking and running load performance testing. The results demonstrate substantial enhancements in overall positioning accuracies compared to conventional GPS-based approaches for aligning AR anchor content in the real world.
ABSTRACT
The IEEE 802.11 wireless local-area network (WLAN) has been deployed around the globe as a major Internet access medium due to its low cost and high flexibility and capacity. Unfortunately, dense wireless networks can suffer from poor performance due to high levels of radio interference resulting from adjoining access points (APs). To address this problem, we studied the AP transmission power optimization method, which selects the maximum or minimum power supplied to each AP so that the average signal-to-interference ratio (SIR) among the concurrently communicating APs is maximized.However, this method requires measurements of receiving signal strength (RSS) under all the possible combinations of powers. It may need intolerable loads and time as the number of APs increases. It also only considers the use of channel bonding (CB), although non-CB sometimes achieves higher performance under high levels of interference. In this paper, we present an AP interface setup optimization method using the throughput estimation model for concurrently communicating APs. The proposed method selects CB or non-CB in addition to the maximum or minimum power for each AP. This model approach avoids expensive costs of RSS measurements under a number of combinations. To estimate the RSS at an AP from another AP or a host, the model needs the distance and the obstacles between them, such as walls. Then, by calculating the estimated RSS with the model and calculating the SIR from them, the AP interface setups for a lot of APs in a large-scale wireless network can be optimized on a computer in a very short time. For evaluation, we conducted extensive experiments using Raspberry Pi for APs and Linux PCs for hosts under 12 network topologies in three buildings at Okayama University, Japan, and Jatiya Kabi Kazi Nazrul Islam University, Bangladesh. The results confirm that the proposed method selects the best AP interface setup with the highest total throughput in any topology.
ABSTRACT
Nowadays, the IEEE 802.11 wireless local area network (WLAN) has been widely used for Internet access services around the world. Then, the unfairness or insufficiency in meeting the throughput request can appear among concurrently communicating hosts with the same access point (AP), which should be solved by sacrificing advantageous hosts. Previously, we studied the fairness control method by adopting packet transmission delay at the AP. However, it suffers from slow convergence and may not satisfy different throughput requests among hosts. In this paper, we propose a throughput request satisfaction method for providing fair or different throughput requests when multiple hosts are concurrently communicating with a single AP. To meet the throughput request, the method (1) measures the single and concurrent throughput for each host, (2) calculates the channel occupying time from them, (3) derives the target throughput to achieve the given throughput request, and (4) controls the traffic by applying traffic shaping at the AP. For evaluations, we implemented the proposal in the WLAN testbed system with one Raspberry Pi AP and up to five hosts, and conducted extensive experiments in five scenarios with different throughput requests. The results confirmed the effectiveness of our proposal.
Subject(s)
Local Area Networks , Personal Satisfaction , Wireless TechnologyABSTRACT
Nowadays, rapid developments of Internet of Things (IoT) technologies have increased possibilities of realizing smart cities where collaborations and integrations of various IoT application systems are essential. However, IoT application systems have often been designed and deployed independently without considering the standards of devices, logics, and data communications. In this paper, we present the design and implementation of the IoT server platform called Smart Environmental Monitoring and Analytical in Real-Time (SEMAR) for integrating IoT application systems using standards. SEMAR offers Big Data environments with built-in functions for data aggregations, synchronizations, and classifications with machine learning. Moreover, plug-in functions can be easily implemented. Data from devices for different sensors can be accepted directly and through network connections, which will be used in real-time for user interfaces, text files, and access to other systems through Representational State Transfer Application Programming Interface (REST API) services. For evaluations of SEMAR, we implemented the platform and integrated five IoT application systems, namely, the air-conditioning guidance system, the fingerprint-based indoor localization system, the water quality monitoring system, the environment monitoring system, and the air quality monitoring system. When compared with existing research on IoT platforms, the proposed SEMAR IoT application server platform offers higher flexibility and interoperability with the functions for IoT device managements, data communications, decision making, synchronizations, and filters that can be easily integrated with external programs or IoT applications without changing the codes. The results confirm the effectiveness and efficiency of the proposal.
