Effect of filler load on structural coloration and color adjustment potential of resin composites.

The color-matching ability of single-shade composites Omnichroma (OMN) and Omnichroma Flow (OCF) is ensured by structural color, which arises from monodisperse 260 nm spherical fillers. This study evaluated how filler load influences the color adjustment potential of composite restorations to human teeth of various shades. The performance of composites containing the 260 nm spherical fillers -OMN (79 wt%), OCF (71 wt%), and experimental composites R1 (65 wt%), and R2 (60 wt%)- was compared to two conventional A2-shade composites and a transparent composite. Additionally, the translucency parameter, spectral reflectance, and light transmission properties were assessed. Composites with a lower load of the 260 nm spherical fillers exhibited lower light diffusion and lower reflectance in the yellow-to-red range (580-650 nm), which is characteristic for the structural color of OMN and OCF. The best color adjustment was achieved with OCF, presumably due to its high translucency and uniform spectral reflectance.

Does the thickness of universal-shade composites affect the ability to reflect the color of background dentin?

The recently introduced resin composites with a universal shade are claimed to match any tooth color. In this study, it was examined how composite thickness affects the color adjustment of conventional and universal-shade composites to background dentin. Thirty sound human central incisors of various shade were used, and color differences between their intact labial surfaces, exposed dentin surfaces and composite restorations (thickness 1-3 mm) were evaluated. In addition, the translucency, light transmission characteristics, and spectral reflectance of the composites were measured. The results showed that universal-shade composites outperformed conventional composites of A2 shade in the adjustment of hue and chroma (p<0.05) but not in lightness (p>0.05). The color adjustment potential of all composites significantly decreased as their thickness increased (p<0.05). The effect of thickness on Omnichroma and Omnichroma Flow was less marked, presumably because of their higher translucency (p<0.05) and structural coloration which induces light reflectance in the yellow-to-red range.

Color adjustment potential of single-shade resin composite to various-shade human teeth: Effect of structural color phenomenon.

This study evaluated the effect of the structural color phenomenon in resin composites (RCs) on the color adjustment of restorations by investgating their color reproduction performance in human incisors of various shade. Cervical cavities were filled with a single-shade RC with 260 nm spherical fillers (Omnichroma (OMN)), conventional A2-shade RCs (Estelite Σ Quick or Clearfil AP-X), or experimental RCs with 5-50 nm fumed silica fillers (R1) and 100 nm spherical fillers (R2). Color parameters (L*C*h*) were measured using a CIE XYZ camera along the centerline of the restorations, and the color difference (∆E00) between corresponding areas of intact and restored teeth was calculated. Additionally, the reflectance spectra of OMN, R1, and R2 were investigated. OMN exhibited significantly lower ∆E00 than other tested RCs (p<0.05) and its reflection spectrum ranged from blue to red, while a blue peak was observed with R1 and R2, indicating a higher color adjustment potential of OMN.