ABSTRACT
With the advent of the first laser sources and suitable detectors, optical sensor applications immediately also came into focus. During the last decades, a huge variety of optical sensor concepts were developed, yet the forecast for the future application potential appears even larger. In this context, the development of new sensor probes at different scales down to the atomic or molecular level open new avenues for research and development. We investigated an iron based triazole molecular spin-crossover complex changing its absorption characteristics significantly by varying environmental parameters such as humidity, temperature, magnetic or electric field, respectively, with respect to its suitability for a new class of versatile molecular sensor probes. Hereby, besides the investigation of synthesized pure bulk material using different analyzing methods, we also studied amorphous micro particles which were applied in or onto optical waveguide structures. We found that significant changes of the reflection spectra can also be obtained after combining the particles with different types of optical waveguides.The obtained results demonstrate the suitability of the material complex for a broad field of future sensor applications.
ABSTRACT
The lower respiratory tract is a hierarchical network of compliant tubular structures that are made from extracellular matrix proteins with a wall lined by an epithelium. While microfluidic airway-on-a-chip models incorporate the effects of shear and stretch on the epithelium, week-long air-liquid-interface culture at physiological shear stresses, the circular cross-section, and compliance of native airway walls have yet to be recapitulated. To overcome these limitations, a collagen tube-based airway model is presented. The lumen is lined with a confluent epithelium during two-week continuous perfusion with warm, humid air while presenting culture medium from the outside and compensating for evaporation. The model recapitulates human small airways in extracellular matrix composition and mechanical microenvironment, allowing for the first time dynamic studies of elastocapillary phenomena associated with regular breathing and mechanical ventilation, as well as their impacts on the epithelium. A case study reveales increasing damage to the epithelium during repetitive collapse and reopening cycles as opposed to overdistension, suggesting expiratory flow resistance to reduce atelectasis. The model is expected to promote systematic comparisons between different clinically used ventilation strategies and, more broadly, to enhance human organ-on-a-chip platforms for a variety of tubular tissues.
Subject(s)
Collagen , Epithelial Cells , Humans , Epithelial Cells/cytology , Collagen/chemistry , Lab-On-A-Chip DevicesABSTRACT
Tubular biological structures consisting of extracellular matrix (ECM) proteins and cells are basic functional units of all organs in animals and humans. ECM protein solutions at low concentrations (5-10 milligrams per milliliter) are abundantly used in 3D cell culture. However, their poor "printability" and minute-long gelation time have made the direct extrusion of tubular structures in bioprinting applications challenging. Here, this limitation is overcome and the continuous, template-free conversion of low-concentration collagen, elastin, and fibrinogen solutions into tubular structures of tailored size and radial, circumferential and axial organization is demonstrated. The approach is enabled by a microfabricated printhead for the consistent circumferential distribution of ECM protein solutions and lends itself to scalable manufacture. The attached confinement accommodates minute-long residence times for pH, temperature, light, ionic and enzymatic gelation. Chip hosted ECM tubular structures are amenable to perfusion with aqueous solutions and air, and cyclic stretching. Predictive collapse and reopening in a crossed-tube configuration promote all-ECM valves and pumps. Tissue level function is demonstrated by factors secreted from cells embedded within the tube wall, as well as endothelial or epithelial barriers lining the lumen. The described approaches are anticipated to find applications in ECM-based organ-on-chip and biohybrid structures, hydraulic actuators, and soft machines.
Subject(s)
Bioprinting , Tissue Engineering , Animals , Collagen , Elastin , Extracellular Matrix , HumansABSTRACT
The multiscale organization of protein-based fibrillar materials is a hallmark of many organs, but the recapitulation of hierarchal structures down to fibrillar scales, which is a requirement for withstanding physiological loading forces, has been challenging. We present a microfluidic strategy for the continuous, large-scale formation of strong, handleable, free-standing, multicentimeter-wide collagen sheets of unprecedented thinness through the application of hydrodynamic focusing with the simultaneous imposition of strain. Sheets as thin as 1.9 µm displayed tensile strengths of 0.5-2.7 MPa, Young's moduli of 3-36 MPa, and modulated the diffusion of molecules as a function of collagen nanoscale structure. Smooth muscle cells cultured on engineered sheets oriented in the direction of aligned collagen fibrils and generated coordinated vasomotor responses. The described biofabrication approach enables rapid formation of ultrathin collagen sheets that withstand physiologically relevant loads for applications in tissue engineering and regenerative medicine, as well as in organ-on-chip and biohybrid devices.
Subject(s)
Collagen , Extracellular Matrix , Anisotropy , Tensile Strength , Tissue EngineeringABSTRACT
The current standard of care for patients with severe large-area burns consists of autologous skin grafting or acellular dermal substitutes. While emerging options to accelerate wound healing involve treatment with allogeneic or autologous cells, delivering cells to clinically relevant wound topologies, orientations, and sizes remains a challenge. Here, we report the one-step in situ formation of cell-containing biomaterial sheets using a handheld instrument that accommodates the topography of the wound. In an approach that maintained cell viability and proliferation, we demonstrated conformal delivery to surfaces that were inclined up to 45° with respect to the horizontal. In porcine pre-clinical models of full-thickness burn, we delivered mesenchymal stem/stromal cell-containing fibrin sheets directly to the wound bed, improving re-epithelialization, dermal cell repopulation, and neovascularization, indicating that this device could be introduced in a clinical setting improving dermal and epidermal regeneration.
Subject(s)
Burns/physiopathology , Burns/therapy , Skin, Artificial , Skin/physiopathology , Animals , Biocompatible Materials/chemistry , Biocompatible Materials/metabolism , Burns/metabolism , Cell Differentiation , Cell Proliferation , Fibrin/metabolism , Humans , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/metabolism , Skin/chemistry , Skin/injuries , Skin/metabolism , Skin Transplantation , Swine , Wound HealingABSTRACT
Hydrogel waveguides have found increased use for variety of applications where biocompatibility and flexibility are important. In this work, we demonstrate the use of polyethylene glycol diacrylate (PEGDA) waveguides to realize a monolithic lab-on-a-chip device. We performed a comprehensive study on the swelling and optical properties for different chain lengths and concentrations in order to realize an integrated biocompatible waveguide in a microfluidic device for chemical sensing. Waveguiding properties of PEGDA hydrogel were used to guide excitation light into a microfluidic channel to measure the fluorescence emission profile of rhodamine 6G as well as collect the fluorescence signal from the same device. Overall, this work shows the potential of hydrogel waveguides to facilitate delivery and collection of optical signals for potential use in wearable and implantable lab-on-a-chip devices.
Subject(s)
Biosensing Techniques , Hydrogels/chemistry , Lab-On-A-Chip Devices , Rhodamines/chemistry , Fluorescence , Microfluidics , Polyethylene Glycols/chemistry , Printing, Three-DimensionalABSTRACT
We present a handheld skin printer that enables the in situ formation of biomaterial and skin tissue sheets of different homogeneous and architected compositions. When manually positioned above a target surface, the compact instrument (weight <0.8 kg) conformally deposits a biomaterial or tissue sheet from a microfluidic cartridge. Consistent sheet formation is achieved by coordinating the flow rates at which bioink and cross-linker solution are delivered, with the speed at which a pair of rollers actively translate the cartridge along the surface. We demonstrate compatibility with dermal and epidermal cells embedded in ionically cross-linkable biomaterials (e.g., alginate), and enzymatically cross-linkable proteins (e.g., fibrin), as well as their mixtures with collagen type I and hyaluronic acid. Upon rapid crosslinking, biomaterial and skin cell-laden sheets of consistent thickness, width and composition were obtained. Sheets deposited onto horizontal, agarose-coated surfaces were used for physical and in vitro characterization. Proof-of-principle demonstrations for the in situ formation of biomaterial sheets in murine and porcine excisional wound models illustrate the capacity of depositing onto inclined and compliant wound surfaces that are subject to respiratory motion. We expect the presented work will enable the in situ delivery of a wide range of different cells, biomaterials, and tissue adhesives, as well as the in situ fabrication of spatially organized biomaterials, tissues, and biohybrid structures.
Subject(s)
Biocompatible Materials , Bioprinting/instrumentation , Re-Epithelialization , Skin , Animals , Biocompatible Materials/administration & dosage , Biocompatible Materials/therapeutic use , Cross-Linking Reagents , Equipment Design , Mice , Sepharose , Skin/cytology , Skin/injuries , Swine , Tissue ScaffoldsABSTRACT
We present a compact microfluidic platform for the automated, multimodal assessment of intact small blood vessels. Mouse olfactory artery segments were reversibly loaded onto a microfluidic device and kept under physiological (i.e., close to in vivo) environmental conditions. For immunohistochemical endpoint protein analysis, automated on chip fixation and staining of the artery eliminated the need for any subsequent tissue sectioning or processing outside the chip. In a first case study, we demonstrate the blood vessel abluminal structure based on the positions of smooth muscle cell nuclei, actin filaments and voltage gated calcium channels. In a second case study we incubated smooth muscle cells (SMCs) with a calcium-sensitive dye to simultaneously assess time-dependent, agonist-induced calcium and diameter changes of pressurized resistance arteries. We expect the presented microfluidic platform to promote routine on-chip staining and quantitative fluorescence imaging of intact blood vessels from different vascular beds, tissue engineered vascular constructs and vascularized microtissues. The at least tenfold reduction in required aliquot volumes for functional assessment and staining was achieved by on-board fluid manipulation of the syringe-pump free platform and may promote its applications for screening of newly synthesized compounds.
Subject(s)
Arteries/physiology , Microfluidic Analytical Techniques/instrumentation , Models, Cardiovascular , Tissue Culture Techniques/instrumentation , Animals , Arteries/chemistry , Arteries/metabolism , Equipment Design , Mice , Microfluidic Analytical Techniques/methods , Olfactory Bulb/blood supplyABSTRACT
We present an on-chip liquid routing technique intended for application in well-based microfluidic systems that require long-term active pumping at low to medium flowrates. Our technique requires only one fluidic feature layer, one pneumatic control line and does not rely on flexible membranes and mechanical or moving parts. The presented bubble pump is therefore compatible with both elastomeric and rigid substrate materials and the associated scalable manufacturing processes. Directed liquid flow was achieved in a microchannel by an in-series configuration of two previously described "bubble gates", i.e., by gas-bubble enabled miniature gate valves. Only one time-dependent pressure signal is required and initiates at the upstream (active) bubble gate a reciprocating bubble motion. Applied at the downstream (passive) gate a time-constant gas pressure level is applied. In its rest state, the passive gate remains closed and only temporarily opens while the liquid pressure rises due to the active gate's reciprocating bubble motion. We have designed, fabricated and consistently operated our bubble pump with a variety of working liquids for >72 hours. Flow rates of 0-5.5 µl min(-1), were obtained and depended on the selected geometric dimensions, working fluids and actuation frequencies. The maximum operational pressure was 2.9 kPa-9.1 kPa and depended on the interfacial tension of the working fluids. Attainable flow rates compared favorably with those of available micropumps. We achieved flow rate enhancements of 30-100% by operating two bubble pumps in tandem and demonstrated scalability of the concept in a multi-well format with 12 individually and uniformly perfused microchannels (variation in flow rate <7%). We envision the demonstrated concept to allow for the consistent on-chip delivery of a wide range of different liquids that may even include highly reactive or moisture sensitive solutions. The presented bubble pump may provide active flow control for analytical and point-of-care diagnostic devices, as well as for microfluidic cells culture and organ-on-chip platforms.
Subject(s)
Microfluidic Analytical Techniques/instrumentation , Equipment Design , Point-of-Care Systems , PressureABSTRACT
Low-loss optical-coupling structures are highly relevant for applications in fields as diverse as information and communication technologies, integrated circuits, or flexible and highly-functional polymer sensor networks. For this suitable and reliable production methods are crucial. Self-written waveguides are an interesting solution. In this work, we present a simple and efficient one-polymer approach for self-written optical connections between light-guiding structures such as single-mode and multi-mode optical fibers or waveguides that relies on self focusing of the light inside a photopolymerizing mixture. The optical connections are produced in a two-step process by writing into monomer resin using cw laser light in the blue wavelength range and subsequent UV curing. Since only one photopolymerizing resin is required, we reduced the fabrication complexity compared to previous approaches to obtain a waveguide embedded in a rigid cladding material. We discuss the production method, the results obtained as function of relevant process parameters such as writing speed or curing time, and evaluate optical properties and coupling efficiencies.
ABSTRACT
Increase in the ionic strength of water that is mediated by the reaction of carbon dioxide (CO2) with nitrogenous bases is a promising approach toward phase separation in mixtures of water with organic solvents and potentially water purification. Conventional macroscale studies of this complicated process are challenging, due to its occurrence via several consecutive and concurrent steps, mass transfer limitation, and lack of control over gas-liquid interfaces. We report a new microfluidic strategy for fundamental studies of liquid-liquid phase separation mediated by CO2 as well as screening of the efficiency of nitrogenous agents. A single set of microfluidic experiments provided qualitative and quantitative information on the kinetics and completeness of water-tetrahydrofuran phase separation, the minimum amount of CO2 required to complete phase separation, the total CO2 uptake, and the rate of CO2 consumption by the liquid mixture. The efficiency of tertiary diamines with different lengths of alkyl chain was examined in a time- and labor-efficient manner and characterized with the proposed efficiency parameter. A wealth of information obtained using the MF methodology can facilitate the development of new additives for switchable solvents in green chemistry applications.
Subject(s)
Carbon Dioxide/chemistry , Chemical Fractionation/methods , Microfluidics/methods , Water/chemistry , Chemical Fractionation/instrumentation , Furans/chemistry , Microfluidics/instrumentation , Osmolar Concentration , Putrescine/analogs & derivatives , Putrescine/chemistry , Solvents/chemistry , Water Purification/instrumentation , Water Purification/methodsABSTRACT
Carbon dioxide (CO2) sequestration, storage and recycling will greatly benefit from comprehensive studies of physical and chemical gas-liquid processes involving CO2. Over the past five years, microfluidics emerged as a valuable tool in CO2-related research, due to superior mass and heat transfer, reduced axial dispersion, well-defined gas-liquid interfacial areas and the ability to vary reagent concentrations in a high-throughput manner. This Minireview highlights recent progress in microfluidic studies of CO2-related processes, including dissolution of CO2 in physical solvents, CO2 reactions, the utilization of CO2 in materials science, and the use of supercritical CO2 as a "green" solvent.
Subject(s)
Carbon Dioxide/chemistry , MicrofluidicsABSTRACT
We introduce oscillatory segmented flow as a compact microfluidic format that accommodates slow chemical reactions for the solution-phase processing of colloidal nanomaterials. The strategy allows the reaction progress to be monitored at a dynamic range of up to 80 decibels (i.e., residence times of up to one day, equivalent to 720-14,400 times the mixing time) from only one sensing location. A train of alternating gas bubbles and liquid reaction compartments (segmented flow) was initially formed, stopped and then subjected to a consistent back-and-forth motion. The oscillatory segmented flow was obtained by periodically manipulating the pressures at the device inlet and outlet via square wave signals generated by non-wetted solenoid valves. The readily implementable format significantly reduced the device footprint as compared with continuous segmented flow. We investigated mixing enhancement for varying liquid segment lengths, oscillation amplitudes and oscillation frequencies. The etching of gold nanorods served as a case study to illustrate the utility of the approach for dynamic characterization and precise control of colloidal nanomaterial size and shape for 5 h. Oscillatory segmented flows will be beneficial for a broad range of lab-on-a-chip applications that require long processing times.
Subject(s)
Colloids/chemistry , Nanoparticles/chemistry , Particle SizeABSTRACT
In femtosecond laser ophthalmic surgery tissue dissection is achieved by photodisruption based on laser induced optical breakdown. In order to minimize collateral damage to the eye laser surgery systems should be optimized towards the lowest possible energy threshold for photodisruption. However, optical aberrations of the eye and the laser system distort the irradiance distribution from an ideal profile which causes a rise in breakdown threshold energy even if great care is taken to minimize the aberrations of the system during design and alignment. In this study we used a water chamber with an achromatic focusing lens and a scattering sample as eye model and determined breakdown threshold in single pulse plasma transmission loss measurements. Due to aberrations, the precise lower limit for breakdown threshold irradiance in water is still unknown. Here we show that the threshold energy can be substantially reduced when using adaptive optics to improve the irradiance distribution by spatial beam shaping. We found that for initial aberrations with a root-mean-square wave front error of only one third of the wavelength the threshold energy can still be reduced by a factor of three if the aberrations are corrected to the diffraction limit by adaptive optics. The transmitted pulse energy is reduced by 17% at twice the threshold. Furthermore, the gas bubble motions after breakdown for pulse trains at 5 kilohertz repetition rate show a more transverse direction in the corrected case compared to the more spherical distribution without correction. Our results demonstrate how both applied and transmitted pulse energy could be reduced during ophthalmic surgery when correcting for aberrations. As a consequence, the risk of retinal damage by transmitted energy and the extent of collateral damage to the focal volume could be minimized accordingly when using adaptive optics in fs-laser surgery.
ABSTRACT
We introduce a miniature gate valve as a readily implementable strategy for actively controlling the flow of liquids on-chip, within a footprint of less than one square millimetre. Bubble gates provide for simple, consistent and scalable control of liquid flow in microchannel networks, are compatible with different bulk microfabrication processes and substrate materials, and require neither electrodes nor moving parts. A bubble gate consists of two microchannel sections: a liquid-filled channel and a gas channel that intercepts the liquid channel to form a T-junction. The open or closed state of a bubble gate is determined by selecting between two distinct gas pressure levels: the lower level corresponds to the "open" state while the higher level corresponds to the "closed" state. During closure, a gas bubble penetrates from the gas channel into the liquid, flanked by a column of equidistantly spaced micropillars on each side, until the flow of liquid is completely obstructed. We fabricated bubble gates using single-layer soft lithographic and bulk silicon micromachining procedures and evaluated their performance with a combination of theory and experimentation. We assessed the dynamic behaviour during more than 300 open-and-close cycles and report the operating pressure envelope for different bubble gate configurations and for the working fluids: de-ionized water, ethanol and a biological buffer. We obtained excellent agreement between the experimentally determined bubble gate operational envelope and a theoretical prediction based on static wetting behaviour. We report case studies that serve to illustrate the utility of bubble gates for liquid sampling in single and multi-layer microfluidic devices. Scalability of our strategy was demonstrated by simultaneously addressing 128 bubble gates.
Subject(s)
Gases/chemistry , Microfluidic Analytical Techniques/instrumentation , Fluorescent Dyes/chemistryABSTRACT
Capitalizing on the benefits of microscale segmented flows, e.g., enhanced mixing and reduced sample dispersion, so far requires specialist training and accommodating a few experimental inconveniences. For instance, microscale gas-liquid flows in many current setups take at least 10 min to stabilize and iterative manual adjustments are needed to achieve or maintain desired mixing or residence times. Here, we report a cruise control strategy that overcomes these limitations and allows microscale gas-liquid (bubble) and liquid-liquid (droplet) flow conditions to be rapidly "adjusted" and maintained. Using this strategy we consistently establish bubble and droplet flows with dispersed phase (plug) velocities of 5-300 mm s(-1), plug lengths of 0.6-5 mm and continuous phase (slug) lengths of 0.5-3 mm. The mixing times (1-5 s), mass transfer times (33-250 ms) and residence times (3-300 s) can therefore be directly imposed by dynamically controlling the supply of the dispersed and the continuous liquids either from external pumps or from local pressurized reservoirs. In the latter case, no chip-external pumps, liquid-perfused tubes or valves are necessary while unwanted dead volumes are significantly reduced.
Subject(s)
Hydrodynamics , Microfluidic Analytical Techniques/instrumentation , Feedback , Gases/chemistry , Syringes , TemperatureABSTRACT
The one-step, continuous formation of mosaic hydrogel sheets is presented. A microfluidic device allows controllable incorporation of secondary biopolymers within a flowing biopolymer sheet followed by a cross-linking step that retains the microscale composition. Information is encoded; mosaic stiffness and diffusivity patterns are created; tessellations are populated with biomolecules, microparticles and viable primary cells; and 3D soft material assemblies are demonstrated.
Subject(s)
Hydrogel, Polyethylene Glycol Dimethacrylate/chemistry , Alginates/chemistry , Biopolymers/chemistry , Human Umbilical Vein Endothelial Cells , Humans , Microfluidic Analytical Techniques , Oligopeptides/chemistryABSTRACT
We present an automated microfluidic (MF) approach for the systematic and rapid investigation of carbon dioxide (CO(2)) mass transfer and solubility in physical solvents. Uniformly sized bubbles of CO(2) with lengths exceeding the width of the microchannel (plugs) were isothermally generated in a co-flowing physical solvent within a gas-impermeable, silicon-based MF platform that is compatible with a wide range of solvents, temperatures and pressures. We dynamically determined the volume reduction of the plugs from images that were accommodated within a single field of view, six different downstream locations of the microchannel at any given flow condition. Evaluating plug sizes in real time allowed our automated strategy to suitably select inlet pressures and solvent flow rates such that otherwise dynamically self-selecting parameters (e.g., the plug size, the solvent segment size, and the plug velocity) could be either kept constant or systematically altered. Specifically, if a constant slug length was imposed, the volumetric dissolution rate of CO(2) could be deduced from the measured rate of plug shrinkage. The solubility of CO(2) in the physical solvent was obtained from a comparison between the terminal and the initial plug sizes. Solubility data were acquired every 5 min and were within 2-5% accuracy as compared to literature data. A parameter space consisting of the plug length, solvent slug length and plug velocity at the microchannel inlet was established for different CO(2)-solvent pairs with high and low gas solubilities. In a case study, we selected the gas-liquid pair CO(2)-dimethyl carbonate (DMC) and volumetric mass transfer coefficients 4-30 s(-1) (translating into mass transfer times between 0.25 s and 0.03 s), and Henry's constants, within the range of 6-12 MPa.
Subject(s)
Carbon Dioxide/chemistry , Microfluidic Analytical Techniques/instrumentation , Microfluidic Analytical Techniques/methods , Formates/chemistry , Hot Temperature , Pressure , Reproducibility of Results , Solubility , SolventsABSTRACT
Local (cell-level) signaling environments, regulated by autocrine and paracrine signaling, and modulated by cell organization, are hypothesized to be fundamental stem cell fate control mechanisms used during development. It has, however, been challenging to demonstrate the impact of cell-level organization on stem cell fate control and to relate stem cell fate outcomes to autocrine and paracrine signaling. We address this fundamental problem using a combined in silico and experimental approach in which we directly manipulate, using laminar fluid flow, the local impact of endogenously secreted gp130-activating ligands and their activation of signal transducer and activator of transcription3 (STAT3) signaling in mouse embryonic stem cells (mESC). Our model analysis predicted that flow-dependent changes in autocrine and paracrine ligand binding would impact heterogeneity in cell- and colony-level STAT3 signaling activation and cause a gradient of cell fate determination along the direction of flow. Interestingly, analysis also predicted that local cell density would be inversely proportional to the degree to which endogenous secretion contributed to cell fate determination. Experimental validation using functional activation of STAT3 by secreted factors under microfluidic perfusion culture demonstrated that STAT3 activation and consequently mESC fate were manipulable by flow rate, position in the flow field, and local cell organization. As a unique demonstration of how quantitative control of autocrine and paracrine signaling can be integrated with spatial organization to elicit higher order cell fate effects, this work provides a general template to investigate organizing principles due to secreted factors.
Subject(s)
Computer Simulation , Embryonic Stem Cells/metabolism , Microfluidics , Models, Biological , Pluripotent Stem Cells/metabolism , Protein Transport , Animals , Autocrine Communication , Cell Differentiation , Cells, Cultured/drug effects , Cytokine Receptor gp130/physiology , Diffusion , Embryonic Stem Cells/cytology , Interleukin-6/physiology , Janus Kinases/physiology , Leukemia Inhibitory Factor/pharmacology , Leukemia Inhibitory Factor Receptor alpha Subunit/physiology , Ligands , Mice , Osmolar Concentration , Paracrine Communication , Phosphorylation , Pluripotent Stem Cells/cytology , Protein Processing, Post-Translational , Recombinant Fusion Proteins/physiology , STAT3 Transcription Factor/metabolism , Signal Transduction , Stem Cell NicheABSTRACT
We present a new concept for studies of the kinetics of fast gas-liquid reactions. The strategy relies on the microfluidic generation of highly monodisperse gas bubbles in the liquid reaction medium and subsequent analysis of time-dependent changes in bubble dimensions. Using reactions of CO(2) with secondary amines as an exemplary system, we demonstrate that the method enables rapid determination of reaction rate constant and conversion, and comparison of various binding agents. The proposed approach addresses two challenges in studies of gas-liquid reactions: a mass-transfer limitation and a poorly defined gas-liquid interface. The proposed strategy offers new possibilities in studies of the fundamental aspects of rapid multiphase reactions, and can be combined with throughput optimization of reaction conditions.