No difference in survival after HLA mismatched versus HLA matched allogeneic stem cell transplantation in Ewing sarcoma patients with advanced disease.

Patients with advanced Ewing sarcoma (AES) carry a poor prognosis. Retrospectively, we analyzed 66 AES patients treated with allogeneic stem cell transplantation (allo-SCT) receiving HLA-mismatched (group A, n = 39) versus HLA-matched grafts (group B, n = 27). Median age at diagnosis was 13 years, and 15 years (range 3-49 years) at allo-SCT. The two groups did not differ statistically in distribution of gender, age, remission status/number of relapses at allo-SCT, or risk stratum. 9/39 (23%) group A versus 2/27 (7%) group B patients developed severe acute graft versus host disease (GvHD). Of patients alive at day 100, 7/34 (21%) group A versus 9/19 (47%) group B patients had developed chronic GvHD. In group A, 33/39 (85%) versus 20/27 (74%) group B patients died of disease and 1/39 (3%) versus 1/27 (4%) patients died of complications, respectively. Altogether 12/66 (18%) patients survived in CR. Median EFS 24 months after allo-SCT was 20% in both groups, median OS was 27% (group A) versus 17% (group B), respectively. There was no difference in EFS and OS in AES patients transplanted with HLA-mismatched versus HLA-matched graft in univariate and multivariate analyses. In this analysis, CR at allo-SCT is a condition for survival (p < 0.02).

Long-term 2007-2013 monitoring of reproductive disturbance in the dun sentinel Assiminea grayana with regard to polymeric materials pollution at the coast of Lower Saxony, North Sea, Germany.

During biological effect monitoring studies of endocrine active compounds with the snail Assiminea grayana in 2007-2013, reproductive disorders including atresia, transformation of capsule/albumen glands into prostates in females and ovotestis, transformation of prostates to capsule/albumen glands, disruption of spermatogenesis, and calcification of tubules in males, were encountered in several years. The search of sources of endocrine active substances was first directed to antifouling biocides from paint particles and extended to leaching compounds from polymeric materials. In contrast to the reference sites, most of the observed disorders occurred at a station near harbors and dockyards polluted with residues from antifouling paints and polymeric materials. Beside of investigations about the potential ingestion of polymer particles by the snails, further investigations of compounds of polymeric materials with endocrine potential should follow.

Post-Polymerization Crosslinked Polyurethane Shape-Memory Polymers.

Novel urethane shape-memory polymers (SMPs) of significant industrial relevance have been synthesized and characterized. Chemically crosslinked SMPs have traditionally been made in a one-step polymerization of monomers and crosslinking agents. However, these new post-polymerization crosslinked SMPs can be processed into complex shapes by thermoplastic manufacturing methods and later crosslinked by heat exposure or by electron beam irradiation. Several series of linear, olefinic urethane polymers were made from 2-butene-1,4-diol, other saturated diols, and various aliphatic diisocyanates. These thermoplastics were melt-processed into desired geometries and thermally crosslinked at 200°C or radiation crosslinked at 50 kGy. The SMPs were characterized by solvent swelling and extraction, differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), tensile testing, and qualitative shape-recovery analysis. Swelling and DMA results provided concrete evidence of chemical crosslinking, and further characterization revealed that the urethanes had outstanding mechanical properties. Key properties include tailorable transitions between 25 and 80°C, tailorable rubbery moduli between 0.2 and 4.2 MPa, recoverable strains approaching 100%, failure strains of over 500% at T(g), and qualitative shape-recovery times of less than 12 seconds at body temperature (37°C). Because of its outstanding thermo-mechanical properties, one polyurethane was selected for implementation in the design of a complex medical device. These post-polymerization crosslinked urethane SMPs are an industrially relevant class of highly processable shape-memory materials.

Cytotoxicity and thermomechanical behavior of biomedical shape-memory polymer networks post-sterilization.

Shape-memory polymers (SMPs) are being increasingly proposed for use in biomedical devices. This paper investigates the cytotoxicity, surface characteristics and thermomechanics of two acrylate-based SMP networks as a function of sterilization using a minimal essential media elution test, FTIR-ATR and dynamic mechanical analysis (DMA). Networks sterilized by low-temperature plasma elicited a cytotoxic response and are shown to completely destroy the cell monolayer. FTIR-ATR analysis showed evidence of surface oxidation with an increase and broadening of the absorbance peak from approximately 3500 to 3100 cm(-1), which is associated with an increase in hydroxyl groups. DMA revealed small, but statistically significant, differences in reduction of the glass transition temperatures of both networks when sterilized with gamma irradiation. One network showed an increase in rubbery modulus, which is an indication of crosslink density, after gamma irradiation. Lastly, practical sterilization concerns of SMP devices are discussed in light of the different methods.

Gliosarcoma cell death after radiosurgery in a rat model.

Therapeutic radiation and subsequent detection of tumor cell death has been performed mainly in vitro systems, making it difficult to accurately characterize the mechanisms of tumor cell death after radiosurgery. To better characterize what occurs to glioma cells after radiation therapy, we developed a rat model using the 9L gliosarcoma cell line implanted reproducibly to the caudate nucleus in rats. After 1 Gy radiation, 9L tumors in vivo induced mainly necrosis (determined by trypan blue exclusion) of 10 - 74 % at 6 - 72 hours post-radiation. This is in contrast to a previous in vitro study which demonstrated that 18 Gy of radiation induces considerably less cell death as determined by trypan blue exclusion (approximately 20 - 25 % at 6 - 72 hours post-radiation). However, significant amounts of apoptosis were detected as early as 6 hours after radiation. Apoptosis determination was by annexin V (marker of early apoptosis) and propidium iodide (marker of membrane stability) staining followed by flow cytometry detection. When caspase 3 and caspase 8 enzymatic activities (mediators of apoptosis) were measured from freshly explanted tumor cells, peak activity was found 6 hours after 1 Gy radiation (p < 0.01). Taken together, these data indicate the presence of apoptosis early after radiation therapy (1 Gy) which progressed to necrosis in a unique in vivo model of gliosarcoma that may prove useful in determining new therapeutic approaches to radiation therapy and tumor cell biology.

Image-guided robotic radiosurgery in a rat glioma model.

Despite the proven efficacy of radiosurgery for the treatment of brain tumors, limited histological information is available after treatment that might allow a better understanding of the relationship between radiation dose, the volume treated, and the response of the surrounding brain to the delivered radiation. The use of an animal model could provide the opportunity to clarify these relationships and answer several other key questions arising in clinical practice. We show here that treatment of small animals with radiosurgery is feasible using a robotically controlled linear accelerator, which offers the advantages of radiosurgery and preserves the potential for fractionated regimens without rigid immobilization. Specifically, we demonstrate the use of a robotically driven linear accelerator to provide radiosurgical treatment to a rat brain tumor model.

Molecular studies on the ecology of Listeria monocytogenes in the smoked fish processing industry.

We have applied molecular approaches, including PCR-based detection strategies and DNA fingerprinting methods, to study the ecology of Listeria monocytogenes in food processing environments. A total of 531 samples, including raw fish, fish during the cold-smoking process, finished product, and environmental samples, were collected from three smoked fish processing facilities during five visits to each facility. A total of 95 (17.9%) of the samples tested positive for L. monocytogenes using a commercial PCR system (BAX for Screening/Listeria monocytogenes), including 57 (27.7%) environmental samples (n = 206), 8 (7.8%) raw material samples (n = 102), 23 (18.1%) samples from fish in various stages of processing(n = 127), and 7 (7.3%) finished product samples (n = 96). L. monocytogenes was isolated from 85 samples (16.0%) using culture methods. Used in conjunction with a 48-h enrichment in Listeria Enrichment Broth, the PCR system had a sensitivity of 91.8% and a specificity of 96.2%. To track the origin and spread of L. monocytogenes, isolates were fingerprinted by automated ribotyping. Fifteen different ribotypes were identified among 85 isolates tested. Ribotyping data established possible contamination patterns, implicating raw materials and the processing environment as potential sources of finished product contamination. Analysis of the distribution of ribotypes revealed that each processing facility had a unique contamination pattern and that specific ribotypes persisted in the environments of two facilities over time (P < or = 0.0006). We conclude that application of molecular approaches can provide critical information on the ecology of different L. monocytogenes strains in food processing environments. This information can be used to develop practical recommendations for improved control of this important food-borne pathogen in the food industry.

Fluorescence intensity multiple distributions analysis: concurrent determination of diffusion times and molecular brightness.

Fluorescence correlation spectroscopy (FCS) has proven to be a powerful technique with single-molecule sensitivity. Recently, it has found a complement in the form of fluorescence intensity distribution analysis (FIDA). Here we introduce a fluorescence fluctuation method that combines the features of both techniques. It is based on the global analysis of a set of photon count number histograms, recorded with multiple widths of counting time intervals simultaneously. This fluorescence intensity multiple distributions analysis (FIMDA) distinguishes fluorescent species on the basis of both the specific molecular brightness and the translational diffusion time. The combined information, extracted from a single measurement, increases the readout effectively by one dimension and thus breaks the individual limits of FCS and FIDA. In this paper a theory is introduced that describes the dependence of photon count number distributions on diffusion coefficients. The theory is applied to a series of photon count number histograms corresponding to different widths of counting time intervals. Although the ability of the method to determine specific brightness values, diffusion times, and concentrations from mixtures is demonstrated on simulated data, its experimental utilization is shown by the determination of the binding constant of a protein-ligand interaction exemplifying its broad applicability in the life sciences.

Two-dimensional fluorescence intensity distribution analysis: theory and applications.

A method of sample analysis is presented which is based on fitting a joint distribution of photon count numbers. In experiments, fluorescence from a microscopic volume containing a fluctuating number of molecules is monitored by two detectors, using a confocal microscope. The two detectors may have different polarizational or spectral responses. Concentrations of fluorescent species together with two specific brightness values per species are determined. The two-dimensional fluorescence intensity distribution analysis (2D-FIDA), if used with a polarization cube, is a tool that is able to distinguish fluorescent species with different specific polarization ratios. As an example of polarization studies by 2D-FIDA, binding of 5'-(6-carboxytetramethylrhodamine) (TAMRA)-labeled theophylline to an anti-theophylline antibody has been studied. Alternatively, if two-color equipment is used, 2D-FIDA can determine concentrations and specific brightness values of fluorescent species corresponding to individual labels alone and their complex. As an example of two-color 2D-FIDA, binding of TAMRA-labeled somatostatin-14 to the human type-2 high-affinity somatostatin receptors present in stained vesicles has been studied. The presented method is unusually accurate among fluorescence fluctuation methods. It is well suited for monitoring a variety of molecular interactions, including receptors and ligands or antibodies and antigens.

The measurement of proton stopping power using proton-cone-beam computed tomography.

A cone-beam computed tomography (CT) system utilizing a proton beam has been developed and tested. The cone beam is produced by scattering a 160 MeV proton beam with a modifier that results in a signal in the detector system, which decreases monotonically with depth in the medium. The detector system consists of a Gd2O2S:Tb intensifying screen viewed by a cooled CCD camera. The Feldkamp-Davis-Kress cone-beam reconstruction algorithm is applied to the projection data to obtain the CT voxel data representing proton stopping power. The system described is capable of reconstructing data over a 16 x 16 x 16 cm3 volume into 512 x 512 x 512 voxels. A spatial and contrast resolution phantom was scanned to determine the performance of the system. Spatial resolution is significantly degraded by multiple Coulomb scattering effects. Comparison of the reconstructed proton CT values with x-ray CT derived proton stopping powers shows that there may be some advantage to obtaining stopping powers directly with proton CT. The system described suggests a possible practical method of obtaining this measurement in vivo.

Fluorescence-intensity distribution analysis and its application in biomolecular detection technology.

A methodology, fluorescence-intensity distribution analysis, has been developed for confocal microscopy studies in which the fluorescence intensity of a sample with a heterogeneous brightness profile is monitored. An adjustable formula, modeling the spatial brightness distribution, and the technique of generating functions for calculation of theoretical photon count number distributions serve as the two cornerstones of the methodology. The method permits the simultaneous determination of concentrations and specific brightness values of a number of individual fluorescent species in solution. Accordingly, we present an extremely sensitive tool to monitor the interaction of fluorescently labeled molecules or other microparticles with their respective biological counterparts that should find a wide application in life sciences, medicine, and drug discovery. Its potential is demonstrated by studying the hybridization of 5'-(6-carboxytetramethylrhodamine)-labeled and nonlabeled complementary oligonucleotides and the subsequent cleavage of the DNA hybrids by restriction enzymes.

Two-dimensional dose distribution of a miniature x-ray device for stereotactic radiosurgery.

The Photon Radiosurgery System is a miniature x-ray device developed for the treatment of small intracranial neoplasms. The x-rays are generated at the tip of a 10-cm-long, 3-mm-diam probe with a nearly isotropic distribution. Results from measurements of the two-dimensional dose distribution around the x-ray source are presented using two methods: (1) dose measurement with an ionization chamber and a water phantom system and (2) dose measurement with radiochromic film and a solid water phantom. The shape of the two angular dose distributions in the axial plane agree with each other to with approximately 10% and the dose at 10 mm from the source, orthogonal to the probe axis, was about 20% lower than at the same distance along the axis. The relative dose difference of 20% corresponds to a change in distance from the source of +/- 0.3 mm at 10 mm. It is shown that the anisotropy of radiation distribution in the axial plane can be improved to approximately 10% by adjusting the electron beam with a 12% reduction in the overall radiation output.

Allograft heart valve viability and valve-processing variables.

BACKGROUND: The impact of allograft valve viability on valve durability remains controversial. Analyses of our clinical results have demonstrated the superiority of the cryopreserved valve viable at the time of implantation over the 4 degrees C stored valve nonviable at the time of implantation. In this study, we quantitatively assessed the effects on viability of current and past valve-processing protocols at The Prince Charles Hospital. METHODS: The viability of pulmonary valves was quantitatively analyzed by thin-layer autoradiography to assess the effects of donor type, antibiotics, and valve storage. RESULTS: Control valve segments obtained from beating-heart donor valves had a higher initial viability (0.92+/-0.02) than nonbeating-heart donor valves (0.66+/-0.03). Cryopreservation after low-dose antibiotic sterilization significantly reduced viability to 50% to 60% of the control, and in the presence of amphotericin B, viability dropped further to 10% to 36% of the control. After 7 days' storage at 4 degrees C, viability was reduced to 2% of control and to 0% viability after 21 days. CONCLUSIONS: For maximal preimplantation viability, valves should be procured as soon as possible after cessation of heart beat and should be cryopreserved if they are not to be clinically implanted within 1 to 2 days. Amphotericin B should not be used in conjunction with cryopreservation if viability is to be maximized.

Initial characterization of the dosimetry and radiology of a device for administering interstitial stereotactic radiosurgery.

OBJECTIVE: We report the design and initial characterization of the dosimetry and radiobiology of a novel device for interstitial stereotactic radiosurgery. INSTRUMENTATION: The device is lightweight, handheld, and battery-powered, and it emits x-ray radiation from the tip of a probe 3 mm in diameter by 10 cm in length. METHODS: The dosimetry was characterized by two independent methods: thermoluminescent dosimeters and radiochromic film. The radiobiology was characterized by in vivo irradiation of rat liver, dog liver, and dog brain. The animals were killed at varying intervals of time, and histological examinations were performed. Heat transfer from the probe to dog brain was studied in vivo by placing thermocouple sensors around the probe tip before irradiating. RESULTS: Both dosimetric methods showed a steep dose-distance fall-off relationship (proportional to the reciprocal of the cube of the distance from the probe tip). Rats and dogs that were killed weeks to months after liver irradiation tended to have sharply demarcated lesions. Liver enzyme levels, measured serially in the dogs, did not give evidence of chronic inflammation. Histological examination of the brains of dogs that were killed acutely after irradiation did not show evidence of inflammation, edema, or hemorrhage. The tissue temperature elevation 1 cm from the tip never exceeded 0.5 degree C, thereby excluding hyperthermia as a significant contributor to the formation of lesions. CONCLUSIONS: Because this device requires relatively few supporting resources, has sharp dosimetric properties, and seems to be safe, it may be useful as a clinical tool for interstitial stereotactic radiosurgery.

Human aortic valve allografts elicit a donor-specific immune response.

OBJECTIVE: The nature and magnitude of the immunologic response to implantation of human cryopreserved aortic valve allografts was investigated. METHODS: Twenty aortic valve allograft recipients were investigated for donor-specific antibody and T-cell-mediated responses with serial flow cytometric and microlymphocytotoxic crossmatch assays and one-way mixed lymphocyte cultures. RESULTS: Donor-specific immunoglobulin G antibodies to class I and II human leukocyte antigens were first detected in the serum of all aortic valve allograft recipients at 30 days after implantation and persisted in substantial amounts in all but one of the recipients at day 365. Recipient T-cell alloreactivity toward donor lymphocytes was significantly increased at day 30 compared with levels before and 10 days after operation. CONCLUSIONS: Cryopreserved aortic valve allografts elicit a substantial allogeneic response in recipients. This alloreactivity may contribute to the observed morphologic changes in aortic valve allografts and eventual long-term deterioration of allograft function.

Proton dosimetry intercomparison.

BACKGROUND AND PURPOSE: Methods for determining absorbed dose in clinical proton beams are based on dosimetry protocols provided by the AAPM and the ECHED. Both groups recommend the use of air-filled ionization chambers calibrated in terms of exposure or air kerma in a 60Co beam when a calorimeter or Faraday cup dosimeter is not available. The set of input data used in the AAPM and the ECHED protocols, especially proton stopping powers and w-value is different. In order to verify inter-institutional uniformity of proton beam calibration, the AAPM and the ECHED recommend periodic dosimetry intercomparisons. In this paper we report the results of an international proton dosimetry intercomparison which was held at Loma Linda University Medical Center. The goal of the intercomparison was two-fold: first, to estimate the consistency of absorbed dose delivered to patients among the participating facilities, and second, to evaluate the differences in absorbed dose determination due to differences in 60Co-based ionization chamber calibration protocols. MATERIALS AND METHODS: Thirteen institutions participated in an international proton dosimetry intercomparison. The measurements were performed in a 15-cm square field at a depth of 10 cm in both an unmodulated beam (nominal accelerator energy of 250 MeV) and a 6-cm modulated beam (nominal accelerator energy of 155 MeV), and also in a circular field of diameter 2.6 cm at a depth of 1.14 cm in a beam with 2.4 cm modulation (nominal accelerator energy of 100 MeV). RESULTS: The results of the intercomparison have shown that using ionization chambers with 60Co calibration factors traceable to standard laboratories, and institution-specific conversion factors and dose protocols, the absorbed dose specified to the patient would fall within 3% of the mean value. A single measurement using an ionization chamber with a proton chamber factor determined with a Faraday cup calibration differed from the mean by 8%. CONCLUSION: The adoption of a single ionization chamber dosimetry protocol and uniform conversion factors will establish agreement on proton absorbed dose to approximately 1.5%, consistent with that which has been observed in high-energy photon and electron dosimetry.

Alanine EPR dosimeter response in proton therapy beams.

We report a series of measurements directed to assess the suitability of alanine as a mailable dosimeter for dosimetry quality assurance of proton radiation therapy beams. These measurements include dose-response of alanine at 140 MeV, and comparison of response vs energy with a parallel plate ionization chamber. All irradiations were made at the Harvard Cyclotron Laboratory, and the dosimeters were read at NIST. The results encourage us that alanine could be expected to serve as a mailable dosimeter with systematic error due to differential energy response no greater than 3% when doses of 25 Gy are used.

Proton dosimetry in bone using electron spin resonance.

We have studied the ESR response of proton-irradiated (in vitro) bone. The ESR response as a function of proton (E = 105 MeV) dose to bone was linear from 0 to 50 Gy and similar to the photon (E = 6 MV) dose response. The ESR depth response (Bragg) curve was depressed as compared to a depth-response curve determined with a parallel plate ionization chamber (PPIC). There was a short-term ESR signal fade in the Bragg peak region, likely attributable to the organic component in bone. We are continuing to investigate these latter two effects.