ROS-Responsive 4D Printable Acrylic Thioether-Based Hydrogels for Smart Drug Release.

Reactive oxygen species (ROS) play a key role in several biological functions like regulating cell survival and signaling; however, their effect can range from beneficial to nondesirable oxidative stress when they are overproduced causing inflammation or cancer diseases. Thus, the design of tailor-made ROS-responsive polymers offers the possibility of engineering hydrogels for target therapies. In this work, we developed thioether-based ROS-responsive difunctional monomers from ethylene glycol/thioether acrylate (EGnSA) with different lengths of the EGn chain (n = 1, 2, 3) by the thiol-Michael addition click reaction. The presence of acrylate groups allowed their photopolymerization by UV light, while the thioether groups conferred ROS-responsive properties. As a result, smart PEGnSA hydrogels were obtained, which could be processed by four-dimensional (4D) printing. The mechanical properties of the hydrogels were determined by rheology, pointing out a decrease of the elastic modulus (G') with the length of the EG segment. To enhance the stability of the hydrogels after swelling, the EGnSA monomers were copolymerized with a polar monomer, 2-hydroxyethyl acrylate (HEA), leading to P[(EGnSA)x-co-HEAy] with improved compatibility in aqueous media, making it a less brittle material. Swelling properties of the hydrogels increased in the presence of hydrogen peroxide, a kind of ROS, reaching values of ≈130% for P[(EG3SA)7-co-HEA93] which confirms the stimuli-responsive properties. Then, the P[(EG3SA)x-co-HEAy] hydrogels were employed as matrixes for the encapsulation of a chemotherapeutic drug, 5-fluorouracil (5FU), which showed sustained release over time modulated by the presence of H2O2. Finally, the effect of the 5-FU release from P[(EG3SA)x-co-HEAy] hydrogels was tested in vitro with melanoma cancer cells B16F10, pointing out B16F10 growth inhibition values in the range of 40-60% modulated by the EG3SA percentage and the presence or absence of ROS agents, thus confirming their excellent ROS-responsive properties for the treatment of localized pathologies.

All-Polymer Nanocomposite as Salt-Free Solid Electrolyte for Lithium Metal Batteries.

Solid polymer electrolytes that combine both a high lithium-ion transference number and mechanical properties at high temperatures are searched for improving the performance of batteries. Here, we show a salt-free all-polymer nanocomposite solid electrolyte for lithium metal batteries that improves the mechanical properties and shows a high lithium-ion transference number. For this purpose, lithium sulfonamide-functionalized poly(methyl methacrylate) nanoparticles (LiNPs) of very small size (20-30 nm) were mixed with poly(ethylene oxide) (PEO). The morphology of all-polymer nanocomposites was first investigated by transmission electron microscopy (TEM), showing a good distribution of nanoparticles (NPs) even at high contents (50 LiNP wt %). The crystallinity of PEO was investigated in detail and decreased with the increasing concentration of LiNPs. The highest ionic conductivity value for the PEO 50 wt % LiNP nanocomposite at 80 °C is 1.1 × 10-5 S cm-1, showing a lithium-ion transference number of 0.68. Using dynamic mechanic thermal analysis (DMTA), it was shown that LiNPs strengthen PEO, and a modulus of ≈108 Pa was obtained at 80 °C for the polymer nanocomposite. The nanocomposite solid electrolyte was stable with respect to lithium in a Li||Li symmetrical cell for 1000 h. In addition, in a full solid-state battery using LiFePO4 as the cathode and lithium metal as the anode, a specific capacity of 150 mAhg-1 with a current density of 0.05 mA cm-2 was achieved.

Light-Based 3D Multi-Material Printing of Micro-Structured Bio-Shaped, Conducting and Dry Adhesive Electrodes for Bioelectronics.

In this work, a new method of multi-material printing in one-go using a commercially available 3D printer is presented. The approach is simple and versatile, allowing the manufacturing of multi-material layered or multi-material printing in the same layer. To the best of the knowledge, it is the first time that 3D printed Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) micro-patterns combining different materials are reported, overcoming mechanical stability issues. Moreover, the conducting ink is engineered to obtain stable in-time materials while retaining sub-100 µm resolution. Micro-structured bio-shaped protuberances are designed and 3D printed as electrodes for electrophysiology. Moreover, these microstructures are combined with polymerizable deep eutectic solvents (polyDES) as functional additives, gaining adhesion and ionic conductivity. As a result of the novel electrodes, low skin impedance values showed suitable performance for electromyography recording on the forearm. Finally, this concluded that the use of polyDES conferred stability over time, allowing the usability of the electrode 90 days after fabrication without losing its performance. All in all, this demonstrated a very easy-to-make procedure that allows printing PEDOT:PSS on soft, hard, and/or flexible functional substrates, opening up a new paradigm in the manufacturing of conducting multi-functional materials for the field of bioelectronics and wearables.

Fast Visible-Light 3D Printing of Conductive PEDOT:PSS Hydrogels.

Functional inks for light-based 3D printing are actively being searched for being able to exploit all the potentialities of additive manufacturing. Herein, a fast visible-light photopolymerization process is showed of conductive PEDOT:PSS hydrogels. For this purpose, a new Type II photoinitiator system (PIS) based on riboflavin (Rf), triethanolamine (TEA), and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is investigated for the visible light photopolymerization of acrylic monomers. PEDOT:PSS has a dual role by accelerating the photoinitiation process and providing conductivity to the obtained hydrogels. Using this PIS, full monomer conversion is achieved in less than 2 min using visible light. First, the PIS mechanism is studied, proposing that electron transfer between the triplet excited state of the dye (3 Rf*) and the amine (TEA) is catalyzed by PEDOT:PSS. Second, a series of poly(2-hydroxyethyl acrylate)/PEDOT:PSS hydrogels with different compositions are obtained by photopolymerization. The presence of PEDOT:PSS negatively influences the swelling properties of hydrogels, but significantly increases its mechanical modulus and electrical properties. The new PIS is also tested for 3D printing in a commercially available Digital Light Processing (DLP) 3D printer (405 nm wavelength), obtaining high resolution and 500 µm hole size conductive scaffolds.

Reusable antimicrobial antibiotic-free dressings obtained by photopolymerization.

In recent years significant efforts have been made to develop new materials for wound dressing with improved healing properties. However, the synthesis methods usually employed to this end are often complex or require several steps. We describe here the synthesis and characterization of antimicrobial reusable dermatological wound dressings based on N-isopropylacrylamide co-polymerized with [2-(Methacryloyloxy) ethyl] trimethylammonium chloride hydrogels (NIPAM-co-METAC). The dressings were obtained with a very efficient single-step synthesis procedure based on visible light (455 nm) by photopolymerization. To this end, F8BT nanoparticles of the conjugated polymer (poly(9,9-dioctylfluorene-alt-benzothiadiazole) - F8BT) were used as macro-photoinitiators, and a modified silsesquioxane was employed as crosslinker. Dressings obtained by this simple and gentle method show antimicrobial and wound healing properties, without the incorporation of antibiotics or any other additives. The physical and mechanical properties of these hydrogel-based dressings were evaluated, as well as their microbiological properties, through in vitro experiments. Results show that dressings with a molar ratio of METAC of 0.5 or higher exhibit high swelling capacity, appropriate water vapor transmission rate values, stability and thermal response, high ductility and adhesiveness. In addition, biological tests showed that the dressings have significant antimicrobial capacity. The best inactivation performance was found for hydrogels synthesized with the highest METAC content. The dressings were tested several times with fresh bacterial cultures, showing a bacterial kill efficiency of 99.99 % even after three repetitions in a row, employing the same dressing, demonstrating the intrinsic bactericidal property of the materials and their reusability. In addition, the gels show low hemolytic effect, high dermal biocompatibility and noticeable wound healing effects. Overall results demonstrate that some specific hydrogel formulations have potential application as dermatological dressings for wound healing and disinfection.

Multifunctional Ionic Polymers from Deep Eutectic Monomers Based on Polyphenols.

Herein we report a novel family of deep eutectic monomers and the corresponding polymers, made of (meth)acrylic ammonium salts and a series of biobased polyphenols bearing catechol or pyrogallol motifs. Phenolic chemistry allows modulating molecular interactions by tuning the ionic polymer properties from soft adhesive to tough materials. For instance, pyrogallol and hydrocaffeic acid-derived ionic polymers showed outstanding adhesiveness (>1 MPa), while tannic acid/gallic acid polymers with dense hydrogen bond distribution afforded ultratough elastomers (stretchability ≈1000% and strength ≈3 MPa). Additionally, phenolic polymeric deep eutectic solvents (polyDES) featured metal complexation ability, antibacterial properties, and fast processability by digital light 3D printing.

Fast Visible-Light Photopolymerization in the Presence of Multiwalled Carbon Nanotubes: Toward 3D Printing Conducting Nanocomposites.

A new photoinitiator system (PIS) based on riboflavin (Rf), triethanolamine, and multiwalled carbon nanobutes (MWCNTs) is presented for visible-light-induced photopolymerization of acrylic monomers. Using this PIS, photopolymerization of acrylamide and other acrylic monomers was quantitative in seconds. The intervention mechanism of CNTs in the PIS was studied deeply, proposing a surface interaction of MWCNTs with Rf which favors the radical generation and the initiation step. As a result, polyacrylamide/MWCNT hydrogel nanocomposites could be obtained with varying amounts of CNTs showing excellent mechanical, thermal, and electrical properties. The presence of the MWCNTs negatively influences the swelling properties of the hydrogel but significantly improves its mechanical properties (Young modulus values) and electric conductivity. The new PIS was tested for 3D printing in a LCD 3D printer. Due to the fast polymerizations, 3D-printed objects based on the conductive polyacrylamide/CNT nanocomposites could be manufactured in minutes.

Easy-to-Make Polymer Hydrogels by UV-Curing for the Cleaning of Acrylic Emulsion Paint Films.

The cleaning of acrylic emulsion paint surfaces poses a great challenge in the conservation field, due to their high water sensitivity. In this article, we present easy-to-make polymer hydrogels, made by UV-photopolymerization, that show excellent cleaning properties. The formulation of hydrogels obtained by UV-curing and their performance as dry cleaners for acrylic paints was investigated. First, different hydrogel formulations based on functional acrylic monomers were used to formulate a series of UV cross-linked hydrogels by fast UV photopolymerization. Their effectiveness on surface dirt removal was investigated by SEM microscopy and colorimetry. The hydrogels showed excellent cleaning properties and controlled water release, and they still performed satisfactorily after several cleaning uses. The obtained UV-hydrogels were compared to the well-known agar gels, showing benefits in terms of reducing excess water. This article shows that easy-to-make UV-cured hydrogels are an efficient tool for the cleaning of surface dirt from water-sensitive paintings, overcoming the limits of traditional cleaning methods.

Conjugated Polymer Nanoparticles as Unique Coinitiator-Free, Water-Soluble, Visible-Light Photoinitiators of Vinyl Polymerization.

The use of conjugated polymer nanoparticles (CP NPs) of poly(9,9-dioctylfluorene-alt-benzothiadiazole) and poly(9,9-di-n-octylfluorenyl-2,7-diyl) as efficient photoinitiator systems (PIS) of vinyl polymerization in water is reported herein. CP NPs are biocompatible, excitable with blue commercial LEDs and, unlike visible light Type II PIS, do not need co-initiators to trigger a monomer chain reaction. CP NPs photoinitiate polymerization of a variety of acrylic monomers with initiation rates comparable to those observed for well-known Type II PIS. Given the extraordinarily large molar absorption coefficients of CP NPs (≈108 m-1 cm-1 ) very low particle concentration is required for effective polymerization. Additionally, CP NPs behave as conventional macrophotoinitiators significantly reducing contamination risks due to leaching of low molecular weight byproducts. These combined features make CP NPs PIS suitable to synthesize polymeric materials for many healthcare and biomedical applications including drug delivery, tissue engineering, prosthetic implants, and food/medicine packaging. These CP NPs PIS are also used to synthesize nano-hydrogels with a relatively narrow and controlled size distribution in the absence of surfactants. It is proposed that polymerization is initiated at the CP NPs surface by photogenerated free polarons, in close analogy to the mechanism previously described for PIS based on inorganic semiconductor NPs.

Controlled release of antibiotics from photopolymerized hydrogels: Kinetics and microbiological studies.

The development of convenient synthetic methods and improved materials for the production of high load-capacity and biocompatible drug delivery systems is a challenging task with important implications in health sciences. In this work, acrylamide/2-hydroxyethylmethacrylate and N-isopropylacrylamide/2-hydroxyethylmethacrylate hydrogels were synthesized by photopolymerization using energy-efficient green-LEDs. A functionalized silsesquioxane was used as both crosslinker and co-initiator for the photopolymerization. The hybrid organic-inorganic nature of the silsesquioxane improved the resulting hydrogels' properties increasing their swelling capacity and biocompatibility. Additionally, the mild conditions used during the photopolymerization allowed the synthesis of hydrogels in the presence of antibiotics yielding high load-capacity materials in which the drug preserves its molecular structure and antimicrobial activity (as confirmed by HPLC and microbiological assays). The materials were characterized by FTIR, DSC and SEM. Additionally, the kinetics of gels´ swelling and drug release were studied under physiological conditions (pH 7.4 and 37 °C). The results demonstrate how hydrogel composition affects the antibiotics-release kinetics. The final drug release percentage increased with increasing molar fraction of acrylamide or N-isopropylacrylamide and in most cases exceeded 85%. Finally, the antibacterial effect of loaded gels was characterized using a number of assays against Gram negative and Gram positive bacteria. The observed antibacterial effect correlated well with swelling and drug release results. Furthermore, gels are not toxic for isolated erythrocytes as demonstrated by haemolytic tests. Overall, our results indicate that the produced hydrogels are promising materials to develop controlled drug-delivery devices such as capsules, dermatological patches and others.