Bis(imidazolium)-1,3-diphosphete-diide: A Building Block for FeC2 P2 Complexes and Clusters.

Reaction of the 6π-electron aromatic four-membered heterocycle (IPr)2 C2 P2 (1) (IPr=1,3-bis(2,6-diisopropylphenyl)-1,3-dihydro-2H-imidazol-2-ylidene) with [Fe2 CO9 ] gives the neutral iron tricarbonyl complex [Fe(CO)3 -η3 -{(IPr)2 C2 P2 }] (2). Oxidation with two equivalents of the ferrocenium salt, [Fe(Cp)2 ](BArF24 ), affords the dicationic tricarbonyl complex [Fe(CO)3 -η4 -{(IPr)2 C2 P2 }](BArF24 )2 (4). The one-electron oxidation proceeds under concomitant loss of one CO ligand to give the paramagnetic dicarbonyl radical cation complex [Fe(CO)2 -η4 -{(IPr)2 C2 P2 }](BArF24 ) (5). Reduction of 5 allows the preparation of the neutral dicarbonyl complex [Fe(CO)2 -η4 -{(IPr)2 C2 P2 }] (6). An analysis by various spectroscopic techniques (57 Fe Mössbauer, EPR) combined with DFT calculations gives insight into differences of the electronic structure within the members of this unique series of iron carbonyl complexes, which can be either described as electron precise or Wade-Mingos clusters.

Remarkable stability of a molecular ruthenium complex in PEM water electrolysis.

The dinuclear Ru diazadiene olefin complex, [Ru2(OTf)(µ-H)(Me2dad)(dbcot)2], is an active catalyst for hydrogen evolution in a Polymer Exchange Membrane (PEM) water electrolyser. When supported on high surface area carbon black and at 80 °C, [Ru2(OTf)(µ-H)(Me2dad)(dbcot)2]@C evolves hydrogen at the cathode of a PEM electrolysis cell (400 mA cm-2, 1.9 V). A remarkable turn over frequency (TOF) of 7800 molH2 molcatalyst -1 h-1 is maintained over 7 days of operation. A series of model reactions in homogeneous media and in electrochemical half cells, combined with DFT calculations, are used to rationalize the hydrogen evolution mechanism promoted by [Ru2(OTf)(µ-H)(Me2dad)(dbcot)2].

Reduction of Nitrogen Oxides by Hydrogen with Rhodium(I)-Platinum(II) Olefin Complexes as Catalysts.

The nitrogen oxides NO2 , NO, and N2 O are among the most potent air pollutants of the 21st century. A bimetallic RhI -PtII complex containing an especially designed multidentate phosphine olefin ligand is capable of catalytically detoxifying these nitrogen oxides in the presence of hydrogen to form water and dinitrogen as benign products. The catalytic reactions were performed at room temperature and low pressures (3-4 bar for combined nitrogen oxides and hydrogen gases). A turnover number (TON) of 587 for the reduction of nitrous oxide (N2 O) to water and N2 was recorded, making these RhI -PtII complexes the best homogeneous catalysts for this reaction to date. Lower TONs were achieved in the conversion of nitric oxide (NO, TON=38) or nitrogen dioxide (NO2 , TON of 8). These unprecedented homogeneously catalyzed hydrogenation reactions of NOx were investigated by a combination of multinuclear NMR techniques and DFT calculations, which provide insight into a possible reaction mechanism. The hydrogenation of NO2 proceeds stepwise, to first give NO and H2 O, followed by the generation of N2 O and H2 O, which is then further converted to N2 and H2 O. The nitrogen-nitrogen bond-forming step takes place in the conversion from NO to N2 O and involves reductive dimerization of NO at a rhodium center to give a hyponitrite (N2 O2 2- ) complex, which was detected as an intermediate.

Cyano(triphenylsilyl)phosphanide as a Building Block for P,C,N Conjugated Molecules.

The cyano(triphenylsilyl)phosphanide anion was prepared as a sodium salt from 2-phosphaethynolate. The electronic structure of this new cyano(silyl)phosphanide was studied via computational methods and its reactivity investigated using various electrophiles and Lewis acids, demonstrating its P- and N-nucleophilicity. The ambident reactivity is in agreement with computations. The silyl group also shows lability and therefore the cyano(silyl)phosphanide can be considered as a phosphacyanamide synthon, [PCN]2- , and serves as building block for the transfer of a PCN moiety.

Coordination-induced polymerization of P═C bonds leads to regular (P─C) n polycarbophosphanes.

The replacement of carbon in (C─C) n chains of polyolefins by phosphorus leads to polycarbophosphanes (P─C) n , which may possess unique chemical and physical properties. However, macromolecules with a regular (P─C) n chain have never been unambiguously identified. Here, we demonstrate that addition polymerization, a general concept to polymerize olefins, can be extended to P═C double bonds. The polymerization of monomeric 2-phosphanaphthalenes is mediated by copper(I) halides and leads to polycarbophosphanes with an M n of 14 to 34 kDa. Each phosphorus is coordinated to Cu(I), which can be easily removed. Unlike long-term durable polyolefins, the metal-free polymers depolymerize rapidly back to monomers under sunlight or ultraviolet irradiation at λ = 365 nm. The monomers can be recycled for repolymerization, demonstrating a cradle-to-cradle life cycle for polycarbophosphanes.

Theoretical Evaluation of the Molecular Inclusion Process between Chlordecone and Cyclodextrins: A New Method for Mitigating the Basis Set Superposition Error in the Case of an Implicit Solvation Model.

The aim of this work is to describe the molecular inclusion of chlordecone with α-, ß-, and γ-cyclodextrin in aqueous solution using quantum mechanics. The guest-host complexes of chlordecone and cyclodextrins are modeled in aqueous solution using the multiple minima hypersurface methodology with a PM6-D3H4X semiempirical Hamiltonian, and the lowest energy minima obtained are reoptimized using the M06-2X density functional and the intermolecular interactions described using quantum theory of atoms in molecules (QTAIM). The studied complexes are classified according to the degree of inclusion, namely, total occlusion, partial occlusion, and external interaction. More stable complexes are obtained when γ-CD is used as the host molecule. The interactions characterized through QTAIM analysis are all of electrostatic nature, predominantly of dispersive type. In this work, a method based on the counterpoise correction is also discussed to mitigate the basis set superposition error in density functional theory calculations when using an implicit solvation model.

Guest-host complexes of 1-iodochlordecone and ß-1-iodo-pentachlorocyclohexane with cyclodextrins as radiotracers of organochlorine pesticides in polluted water.

The chlordecone (CLD) and the ß-hexachlorocyclohexane (ß-HCH) are persistent organic pollutants with a great environmental stability that cause severe affectations to health. The concentration of these pesticides in the environment is low, which represent a problem for their determination, even for the modern analytical methods. The labeling of these compounds with an iodine radioisotope for their use as radiotracers is a potential solution to this problem. The present work studies the interaction of 1-iodochlordecone (I-CLD) and ß-1-iodo-pentachlorocyclohexane (I-ß-HCH) with cyclodextrins (CDs), during the formation of molecular inclusion complexes pesticide@CDs. The methodology of multiple minima hypersurfaces, quantic calculations based on density functional theory and a topologic study of electronic density were used to corroborate the stability of I-CLD@CDs and I-ß-HCH@CDs complexes. Three main types of guest-host complexes in relation to the occlusion grade were observed: with total occlusion, with partial occlusion and external interaction without occlusion. The more stable complexes are obtained when the γ-CD is the host molecule. The formed complexes with radiolabelled pollutants are analogous with the ones reported in previous works. These results confirm the utility of these complexes for the removal of organochlorine pesticides from polluted water and, also, demonstrate the possibility of using the I-CLD and the I-ß-HCH as possible radiotracers for these pollutants in further studies with environmental proposes.

Explaining the interactions between metaldehyde and acidic surface groups of activated carbon under different pH conditions.

Metaldehyde (MA) is an organic compound widely used in agriculture all around the world as molluscicide. There are growing concerns that relatively high levels of MA have been detected in surface water, which could be ascribed to the fact that it is transparent to common wastewater treatment processes. A theoretical study of the influence of activated carbon (AC) surface groups (SGs) on MA adsorption is done in order to help to understand the process and to evaluate the influence of the acid SGs over the adsorption in AC filters. Multiple Minima Hypersurface methodology was employed in order to study the interactions of the MA with acid SGs (hydroxyl and carboxyl) at acidic and neutral pH, and at different hydration conditions explicitly taking into account the solvent influence. Selected structures were re-optimized using Density Functional Theory and posteriorly refined to achieve a well-defined electron density to characterize the interactions by the Quantum Theory of Atoms in Molecules approach. The obtained results showed that the presence of SGs enhances the adsorption process. The deprotonated carboxyl and hydroxyl SGs of AC models show the strongest interactions, suggesting greater adsorption at neutral pH which is in concordance with experimental data. The main interactions are of a dispersive nature between the pesticide and the π-cloud of the AC and hydrogen bonds between the MA and the acid SGs suggesting that the adsorption process is driven by a physisorption mechanism. Water acts as an intermediary between the AC and MA and competing with it for the adsorption sites.

Evaluation of the molecular inclusion process of ß-hexachlorocyclohexane in cyclodextrins.

The present work aimed to study the guest-host complexes of ß-hexachlorocyclohexane (ß-HCH), a pesticide with high environmental stability that can cause severe health problems, with the most common cyclodextrins (α-, ß-, and γ-CDs). The formation reactions of these molecular inclusion complexes were addressed in this research. The multiple minima hypersurface methodology, quantum calculations based on density functional theory and a topological exploration of the electron density based on the quantum theory of atoms in molecules approach were used to characterize the interaction spaces of the pollutant with the three CDs. Additionally, charge distribution, charge transfer and dual descriptor analyses were employed to elucidate the driving forces involved in the formation of these molecular inclusion complexes. Three types of fundamental interactions were observed: total occlusion, partial occlusion and external interaction (non-occlusion). Finally, experiments were performed to confirm the formation of the studied complexes. The most stable complexes were obtained when γ-CD was the host molecule. The interactions between the pesticide and CDs have fundamentally dispersive natures, as was confirmed experimentally by spectroscopic results. All the obtained results suggest the possibility of using CDs for the purification and treatment of water polluted with ß-HCH.

Theoretical study on the interactions between chlordecone hydrate and acidic surface groups of activated carbon under basic pH conditions.

A theoretical study of the influence of acidic surface groups (SG) of activated carbon (AC) on chlordecone hydrate (CLDh) adsorption is presented, in order to help understanding the adsorption process under basic pH conditions. A seven rings aromatic system (coronene) with a functional group in the edge was used as a simplified model of AC to evaluate the influence of SG in the course of adsorption from aqueous solution at basic pH conditions. Two SG were modeled in their deprotonated form: carboxyl and hydroxyl (COO- and O-), interacting with CLDh. In order to model the solvation process, all systems under study were calculated with up to three water molecules. Multiple Minima Hypersurface (MMH) methodology was employed to study the interactions of CLDh with SG on AC using PM7 semiempirical Hamiltonian, to explore the potential energy surfaces of the systems and evaluate their thermodynamic association energies. The re-optimization of representative structures obtained from MMH was done using M06-2X Density Functional Theory. The Quantum Theory of Atoms in Molecules (QTAIM) was used to characterize the interaction types. As result, the association of CLDh with acidic SG at basic pH conditions preferentially occurs between the two alcohol groups of CLDh with COO- and O- groups and by dispersive interactions of chlorine atoms of CLDh with the graphitic surface. On the other hand, the presence of covalent interactions between the negatively charged oxygen of SG and one hydrogen atom of CLDh alcohol groups (O-⋯HO interactions) without water molecules, was confirmed by QTAIM study. It can be concluded that the interactions of CLDh with acidic SG of AC under basic pH conditions confirms the physical mechanisms of adsorption process.

Structures and stabilities of naturally occurring cyclodextrins: a theoretical study of symmetrical conformers.

A molecular modeling study of symmetrical conformers of α-, ß-, and γ-cyclodextrins in the gas and aqueous phases was carried out using the M06-2X density functional method, with SMD employed as an implicit solvation model. Eight symmetrical conformers were found for each cyclodextrin. Values of geometrical parameters obtained from the modeling study were found to agree well with those obtained from X-ray diffraction structures. A vibrational analysis using harmonic frequencies was performed to determine thermodynamic quantities. The GIAO method was applied to determine proton and carbon-13 NMR chemical shifts, which were then compared with corresponding chemical shifts reported in the literature. Hydrogen-bonding patterns were analyzed using geometrical descriptors, and quantum chemical topology was explored by QTAIM analysis. The results of this study indicated that four of the eight conformers studied for each cyclodextrin are the most populated in aqueous solution. These results provide the foundations for future studies of host-guest complexes involving these cyclodextrins. Graphical abstract δΔGsolvation: variation of free Gibss energy of solvation.

Interacción de la 1-yodoclordecona como radiotrazador, con el grupo carboxilato en carbón activado / Interaction of 1-iodochlordecone, as radioactive tracer, with the carboxylate group on activated carbon

La clordecona es un compuesto organoclorado sintético, empleado como insecticida agrícola y clasificado como contaminante orgánico persistente de aguas y suelos por la Convención de Estocolmo. El uso de carbones activados es una metodología muy popular para la purificación de aguas contaminadas con contaminantes orgánicos persistentes. La clordecona marcada con yodo radiactivo (1-yodoclordecona) puede ser un radiotrazador adecuado para estudios de adsorción, de disponibilidad medioambiental y biodistribución de la clordecona. La selección del carbón activado más adecuado para la adsorción de clordecona requiere evaluar la eficiencia de una gran cantidad de los mismos, de manera empírica, lo que aumenta los costos de investigación. En el presente trabajo, un modelo simplificado de carbón activado con siete anillos aromáticos (coroneno) y un grupo funcional en el borde (carboxilato) se utilizó para evaluar in silico la influencia de este grupo superficial en la adsorción de la clordecona y la 1-yodoclordecona, bajo condiciones neutras de pH. Para ello se empleó la metodología de Hipersuperficie de Múltiples Mínimos con el hamiltoniano semiempírico PM7. Los resultados obtenidos muestran que para el carboxilato en medio neutro existen asociaciones significativas que sugieren quimisorción de la clordecona en el carbón activado. La 1-yodoclordecona se comporta de manera similar a la clordecona en su interacción con el carboxilato, por lo que constituye un buen candidato a radiotrazador para estudios experimentales.

Chlordecone is a synthetic organo chlorinated compound that has been used as pesticide. It has been identified and listed as persistent organic pollutant by the Stockholm Convention. The use of activated carbon filters is one of the most widely popular solutions for water decontamination. The chlordecone labeled with radioactive iodine (1-iodochordecone) is a potential radioactive tracer for studying adsorption, environmental availability and bio-distribution of chlordecone. The selection of the best suited activation carbon for this type of contaminants is mainly an empiric process, increasing the costs of research. A simplified activation carbon model, consisting of a seven ring graphene sheet with a functional group (carboxylate) was used to assess the interaction of chlordecone and 1-iodochlordecone with this surface group under neutral pH conditions over the adsorption process. The Multiple Minima Hypersurface methodology with the semiempirical Hamiltonian PM7 was used. The results indicate that for carboxylate, in neutral conditions, significant associations appear which suggest chemisorption in activated carbon. No significant differences were observed for the interactions of chlordecone and 1-iodochlordecone with carboxylate, making 1-iodochlordecone a good candidate as a radioactive tracer in medical research.

Theoretical study of chlordecone and surface groups interaction in an activated carbon model under acidic and neutral conditions.

Activated carbons (ACs) are widely used in the purification of drinking water without almost any knowledge about the adsorption mechanisms of the persistent organic pollutants. Chlordecone (CLD, Kepone) is an organochlorinated synthetic compound that has been used mainly as agricultural insecticide. CLD has been identified and listed as a persistent organic pollutant by the Stockholm Convention. The selection of the best suited AC for this type of contaminants is mainly an empirical and costly process. A theoretical study of the influence of AC surface groups (SGs) on CLD adsorption is done in order to help understanding the process. This may provide a first selection criteria for the preparation of AC with suitable surface properties. A model of AC consisting of a seven membered ring graphene sheet (coronene) with a functional group on the edge was used to evaluate the influence of the SGs over the adsorption. Multiple Minima Hypersurface methodology (MMH) coupled with PM7 semiempirical Hamiltonian was employed in order to study the interactions of the chlordecone with SGs (hydroxyl and carboxyl) at acidic and neutral pH and different hydration conditions. Selected structures were re-optimized using CAM-B3LYP to achieve a well-defined electron density to characterize the interactions by the Quantum Theory of Atoms in Molecules approach. The deprotonated form of surface carboxyl and hydroxyl groups of AC models show the strongest interactions, suggesting a chemical adsorption. An increase in carboxylic SGs content is proposed to enhance CLD adsorption onto AC at neutral pH conditions.