ABSTRACT
Electrical generation and transduction of polarized electron spins in semiconductors (SCs) are of central interest in spintronics and quantum information science. While spin generation in SCs is frequently realized via electrical injection from a ferromagnet (FM), there are significant advantages in nonmagnetic pathways of creating spin polarization. One such pathway exploits the interplay of electron spin with chirality in electronic structures or real space. Here, utilizing chirality-induced spin selectivity (CISS), the efficient creation of spin accumulation in n-doped GaAs via electric current injection from a normal metal (Au) electrode through a self-assembled monolayer (SAM) of chiral molecules (α-helix l-polyalanine, AHPA-L), is demonstrated. The resulting spin polarization is detected as a Hanle effect in the n-GaAs, which is found to obey a distinct universal scaling with temperature and bias current consistent with chirality-induced spin accumulation. The experiment constitutes a definitive observation of CISS in a fully nonmagnetic device structure and demonstration of its ability to generate spin accumulation in a conventional SC. The results thus place key constraints on the physical mechanism of CISS and present a new scheme for magnet-free SC spintronics.
ABSTRACT
Angiogenesis is essential for tumour growth and metastasis. Antiangiogenic factor-targeting drugs have been approved as first line agents in a variety of oncology treatments. Clinical drugs frequently target the VEGF signalling pathway during sprouting angiogenesis. Accumulating evidence suggests that tumours can evade antiangiogenic therapy through other angiogenesis mechanisms in addition to the vascular sprouting mechanism involving endothelial cells. These mechanisms include (1) sprouting angiogenesis, (2) vasculogenic mimicry, (3) vessel intussusception, (4) vascular co-option, (5) cancer stem cell-derived angiogenesis, and (6) bone marrow-derived angiogenesis. Other non-sprouting angiogenic mechanisms are not entirely dependent on the VEGF signalling pathway. In clinical practice, the conversion of vascular mechanisms is closely related to the enhancement of tumour drug resistance, which often leads to clinical treatment failure. This article summarizes recent studies on six processes of tumour angiogenesis and provides suggestions for developing more effective techniques to improve the efficacy of antiangiogenic treatment.
ABSTRACT
Electroluminescence efficiencies and stabilities of quasi-two-dimensional halide perovskites are restricted by the formation of multiple-quantum-well structures with broad and uncontrollable phase distributions. Here, we report a ligand design strategy to substantially suppress diffusion-limited phase disproportionation, thereby enabling better phase control. We demonstrate that extending the π-conjugation length and increasing the cross-sectional area of the ligand enables perovskite thin films with dramatically suppressed ion transport, narrowed phase distributions, reduced defect densities, and enhanced radiative recombination efficiencies. Consequently, we achieved efficient and stable deep-red light-emitting diodes with a peak external quantum efficiency of 26.3% (average 22.9% among 70 devices and cross-checked) and a half-life of ~220 and 2.8 h under a constant current density of 0.1 and 12 mA/cm2, respectively. Our devices also exhibit wide wavelength tunability and improved spectral and phase stability compared with existing perovskite light-emitting diodes. These discoveries provide critical insights into the molecular design and crystallization kinetics of low-dimensional perovskite semiconductors for light-emitting devices.
ABSTRACT
Organic-inorganic hybrid perovskites have shown tremendous potential for optoelectronic applications. Ion migration within the crystal and across heterointerfaces, however, imposed severe problems with material degradation and performance loss in devices. Encapsulating hybrid perovskite with a thin physical barrier can be essential for suppressing the undesirable interfacial reactions without inhibiting the desirable transport of charge carriers. Here, we demonstrated that nanoscale, pinhole-free Al2O3 layer can be coated directly on the perovskite CH3NH3PbI3 using atomic layer deposition (ALD). The success can be attributed to a multitude of strategies including surface molecular modification and hybrid ALD processing combining the thermal and plasma-enhanced modes. The Al2O3 films provided remarkable protection to the underlying perovskite films, surviving by hours in solvents without noticeable decays in either structural or optical properties. The results advanced the understanding of applying ALD directly on hybrid perovskite and provided new opportunities to implement stable and high-performance devices based on the perovskites.
ABSTRACT
The functionality and performance of a semiconductor is determined by its bandgap. Alloying, as for instance in InxGa1-xN, has been a mainstream strategy for tuning the bandgap. Keeping the semiconductor alloys in the miscibility gap (being homogeneous), however, is non-trivial. This challenge is now being extended to halide perovskites - an emerging class of photovoltaic materials. While the bandgap can be conveniently tuned by mixing different halogen ions, as in CsPb(BrxI1-x)3, the so-called mixed-halide perovskites suffer from severe phase separation under illumination. Here, we discover that such phase separation can be highly suppressed by embedding nanocrystals of mixed-halide perovskites in an endotaxial matrix. The tuned bandgap remains remarkably stable under extremely intensive illumination. The agreement between the experiments and a nucleation model suggests that the size of the nanocrystals and the host-guest interfaces are critical for the photo-stability. The stabilized bandgap will be essential for the development of perovskite-based optoelectronics, such as tandem solar cells and full-color LEDs.
ABSTRACT
Despite their weak nature, van der Waals (vdW) interactions have been shown to effectively control the optoelectronic and vibrational properties of layered materials. However, how vdW effects exist in Ruddlesden-Popper layered halide perovskites remains unclear. Here we reveal the role of interlayer vdW force in Ruddlesden-Popper perovskite in regulating phase-transition kinetics and carrier dynamics based on high-quality epitaxial single-crystalline (C4H9NH3)2PbI4 flakes with controlled dimensions. Both substrate-perovskite epitaxial interaction and interlayer vdW interaction play significant roles in suppressing the structural phase transition. With reducing flake thickness from â¼100 to â¼20 nm, electron-phonon coupling strength decreases by â¼30%, suggesting the ineffectiveness of phonon confinement of the natural quantum wells. Therefore, the conventional understanding that vdW perovskite is equivalent to a multiple quantum well has to be substantially amended due to significant nonlocal phononic effects in the layered crystal, where intralayer interaction is not drastically different from the interlayer force.
ABSTRACT
Perovskite light-emitting diodes (LEDs) have recently attracted great research interest for their narrow emissions and solution processability. Remarkable progress has been achieved in green perovskite LEDs in recent years, but not blue or red ones. Here, highly efficient and spectrally stable red perovskite LEDs with quasi-2D perovskite/poly(ethylene oxide) (PEO) composite thin films as the light-emitting layer are reported. By controlling the molar ratios of organic salt (benzylammonium iodide) to inorganic salts (cesium iodide and lead iodide), luminescent quasi-2D perovskite thin films are obtained with tunable emission colors from red to deep red. The perovskite/polymer composite approach enables quasi-2D perovskite/PEO composite thin films to possess much higher photoluminescence quantum efficiencies and smoothness than their neat quasi-2D perovskite counterparts. Electrically driven LEDs with emissions peaked at 638, 664, 680, and 690 nm have been fabricated to exhibit high brightness and external quantum efficiencies (EQEs). For instance, the perovskite LED with an emission peaked at 680 nm exhibits a brightness of 1392 cd m-2 and an EQE of 6.23%. Moreover, exceptional electroluminescence spectral stability under continuous device operation has been achieved for these red perovskite LEDs.
ABSTRACT
The halide perovskite CsPbBr3 has shown its promise for green light-emitting diodes. The optimal conditions of photoluminescence and the underlying photophysics, however, remain controversial. To address the inconsistency seen in the previous reports and to offer high-quality luminescent materials that can be readily integrated into functional devices with layered architecture, we created thin films of CsPbBr3/Cs4PbBr6 composites based on a dual-source vapor-deposition method. With the capability of tuning the material composition in a broad range, CsPbBr3 is identified as the only light emitter in the composites. Interestingly, the presence of the photoluminescence-inactive Cs4PbBr6 can significantly enhance the light emitting efficiency of the composites. The unique negative thermal quenching observed near the liquid nitrogen temperature indicates that a type of shallow state generated at the CsPbBr3/Cs4PbBr6 interfaces is responsible for the enhancement of photoluminescence.
ABSTRACT
Organic-inorganic hybrid perovskites have shown great potential as building blocks for low-cost optoelectronics for their exceptional optical and electrical properties. Despite the remarkable progress in device demonstration, fundamental understanding of the physical processes in halide perovskites remains limited, especially the unusual electronic behaviors such as the current-voltage hysteresis and the switchable photovoltaic effect. These phenomena are of particular interests for being closely related to device functionalities and performance. In this work, a microscopic picture of electric fields in halide perovskite thin films was obtained using scanning laser microscopy. Unlike conventional semiconductors, distribution of the built-in electric fields in the halide perovskite evolves dynamically under the stimulation of external biases. The observations can be well explained using a model based on field-assisted ion migration, indicating that the mechanism responsible for the evolving charge transport observed in this material is not purely electronic. The anomalous dynamic responses to the applied bias are found to be effectively suppressed by operating the devices at reduced temperature or processing the materials at elevated temperature, which provide potential strategies for designing and creating halide perovskites with more stable charge transport properties in the development of viable perovskite-based optoelectronics.
ABSTRACT
Highly bright light-emitting diodes based on solution-processed all-inorganic perovskite thin film are demonstrated. The cesium lead bromide (CsPbBr3 ) created using a new poly(ethylene oxide)-additive spin-coating method exhibits photoluminescence quantum yield up to 60% and excellent uniformity of electrical current distribution. Using the smooth CsPbBr3 films as emitting layers, green perovskite-based light-emitting diodes (PeLEDs) exhibit electroluminescent brightness and efficiency above 53 000 cd m-2 and 4%: a new benchmark of device performance for all-inorganic PeLEDs.
ABSTRACT
Printed organometal halide perovskite light-emitting diodes (LEDs) are reported that have indium tin oxide (ITO) or carbon nanotubes (CNTs) as the transparent anode, a printed composite film consisting of methylammonium lead tribromide (Br-Pero) and poly(ethylene oxide) (PEO) as the emissive layer, and printed silver nanowires as the cathode. The fabrication can be carried out in ambient air without humidity control. The devices on ITO/glass have a low turn-on voltage of 2.6 V, a maximum luminance intensity of 21014 cd m(-2), and a maximum external quantum efficiency (EQE) of 1.1%, surpassing previous reported perovskite LEDs. The devices on CNTs/polymer were able to be strained to 5 mm radius of curvature without affecting device properties.
ABSTRACT
Bright light-emitting diodes based on solution-processable organometal halide perovskite nanoplatelets are demonstrated. The nanoplatelets created using a facile one-pot synthesis exhibit narrow-band emissions at 529 nm and quantum yield up to 85%. Using these nanoparticles as emitters, efficient electroluminescence is achieved with a brightness of 10 590 cd m(-2) . These ligand-capped nanoplatelets appear to be quite stable in moisture, allowing out-of-glovebox device fabrication.
ABSTRACT
Vanadium dioxide (VO2) has drawn significant attention for its unique metal-to-insulator transition near the room temperature. The high electrical resistivity below the transition temperature (â¼68 °C) is a result of the strong electron correlation with the assistance of lattice (Peierls) distortion. Theoretical calculations indicated that the strong interelectron interactions might induce intriguing optoelectronic phenomena, such as the multiple exciton generation (MEG), a process desirable for efficient optoelectronics and photovoltaics. However, the resistivity of VO2 is quite temperature sensitive, and therefore, the light-induced conductivity in VO2 has often been attributed to the photothermal effects. In this work, we distinguished the photothermal and photoinjection effects in VO2 nanowires by varying the chopping frequency of the optical illumination. We found that, in our VO2 nanowires, the relatively slow photothermal processes can be well suppressed when the chopping frequency is >2 kHz, whereas the fast photoinjection component (direct photoexcitation of charge carriers) remains constant at all chopping frequencies. By separating the photothermal and photoinjection processes, our work set the basis for further studies of carrier dynamics under optical excitations in strongly correlated materials.
Subject(s)
Light , Nanowires , Oxides/chemistry , Vanadium Compounds/chemistryABSTRACT
Periodic structures with dimensions on the order of the wavelength of light can tailor and improve the performance of optical components, and they can enable the creation of devices with new functionalities. For example, distributed Bragg reflectors (DBRs), which are created by periodic modulations in a structure's dielectric medium, are essential in dielectric mirrors, vertical cavity surface emitting lasers, fiber Bragg gratings, and single-frequency laser diodes. This work introduces nanoscale DBRs integrated directly into gallium nitride (GaN) nanowire waveguides. Photonic band gaps that are tunable across the visible spectrum are demonstrated by precisely controlling the grating's parameters. Numerical simulations indicate that in-wire DBRs have significantly larger reflection coefficients in comparison with the nanowire's end facet. By comparing the measured spectra with the simulated spectra, the index of refraction of the GaN nanowire waveguides was extracted to facilitate the design of photonic coupling structures that are sensitive to phase-matching conditions. This work indicates the potential to design nanowire-based devices with improved performance for optical resonators and optical routing.
ABSTRACT
Microwave chemistry has revolutionized synthetic methodology for the preparation of organics, pharmaceuticals, materials, and peptides. The enhanced reaction rates commonly observed in a microwave have led to wide speculation about the function of molecular microwave absorption and whether the absorption leads to microwave specific effects and enhanced molecular heating. The comparison of theoretical modeling, reactor vessel design, and dielectric spectroscopy allows the nuance of the interaction to be directly understood. The study clearly shows an unaltered silicon carbide vessel allows measurable microwave penetration and therefore, molecular absorption of the microwave photons by the reactants within the reaction vessel cannot be ignored when discussing the role of molecular heating in enhanced molecular reactivity for microwave synthesis. The results of the study yield an improved microwave reactor vessel design that eliminates microwave leakage into the reaction volume by incorporating a noble metal surface layer onto a silicon carbide reaction vessel. The systematic study provides the necessary theory and measurements to better inform the arguments in the field.
ABSTRACT
Semiconductor nanowires (NWs) have been studied extensively for over two decades for their novel electronic, photonic, thermal, electrochemical and mechanical properties. This comprehensive review article summarizes major advances in the synthesis, characterization, and application of these materials in the past decade. Developments in the understanding of the fundamental principles of "bottom-up" growth mechanisms are presented, with an emphasis on rational control of the morphology, stoichiometry, and crystal structure of the materials. This is followed by a discussion of the application of nanowires in i) electronic, ii) sensor, iii) photonic, iv) thermoelectric, v) photovoltaic, vi) photoelectrochemical, vii) battery, viii) mechanical, and ix) biological applications. Throughout the discussion, a detailed explanation of the unique properties associated with the one-dimensional nanowire geometry will be presented, and the benefits of these properties for the various applications will be highlighted. The review concludes with a brief perspective on future research directions, and remaining barriers which must be overcome for the successful commercial application of these technologies.
Subject(s)
Nanowires/chemistry , Semiconductors , Animals , Anniversaries and Special Events , Electric Power Supplies , Endoscopy/instrumentation , Humans , Nanotechnology/methods , Neurons/physiology , Optics and Photonics/instrumentation , Optics and Photonics/methods , Photochemical ProcessesABSTRACT
The miniaturization of optoelectronic devices is essential for the continued success of photonic technologies. Nanowires have been identified as potential building blocks that mimic conventional photonic components such as interconnects, waveguides, and optical cavities at the nanoscale. Semiconductor nanowires with high optical gain offer promising solutions for lasers with small footprints and low power consumption. Although much effort has been directed toward controlling their size, shape, and composition, most nanowire lasers currently suffer from emitting at multiple frequencies simultaneously, arising from the longitudinal modes native to simple Fabry-Pérot cavities. Cleaved-coupled cavities, two Fabry-Pérot cavities that are axially coupled through an air gap, are a promising architecture to produce single-frequency emission. The miniaturization of this concept, however, imposes a restriction on the dimensions of the intercavity gaps because severe optical losses are incurred when the cross-sectional dimensions of cavities become comparable to the lasing wavelength. Here we theoretically investigate and experimentally demonstrate spectral manipulation of lasing modes by creating cleaved-coupled cavities in gallium nitride (GaN) nanowires. Lasing operation at a single UV wavelength at room temperature was achieved using nanoscale gaps to create the smallest cleaved-coupled cavities to date. Besides the reduced number of lasing modes, the cleaved-coupled nanowires also operate with a lower threshold gain than that of the individual component nanowires. Good agreement was found between the measured lasing spectra and the predicted spectral modes obtained by simulating optical coupling properties. This agreement between theory and experiment presents design principles to rationally control the lasing modes in cleaved-coupled nanowire lasers.
ABSTRACT
Photocatalytic water splitting represents a promising way to produce renewable hydrogen fuel from solar energy. Ultrathin semiconductor electrodes for water splitting are of particular interest because the optical absorption occurs in the region where photogenerated charge carriers can effectively contribute to the chemical reactions on the surface. It is therefore important to manipulate and concentrate the incident light so that more photons can be absorbed within the thin film. Here we show an enhanced photocurrent in a thin-film iron oxide photoanode coated on arrays of Au nanopillars. The enhancement can be attributed primarily to the increased optical absorption originating from both surface plasmon resonances and photonic-mode light trapping in the nanostructured topography. The resonances can be tuned to a desirable wavelength by varying the thickness of the iron oxide layer. A net enhancement as high as 50% was observed over the solar spectrum.
Subject(s)
Crystallization/methods , Ferric Compounds/chemistry , Gold/chemistry , Nanostructures/chemistry , Nanostructures/radiation effects , Surface Plasmon Resonance/methods , Catalysis/radiation effects , Ferric Compounds/radiation effects , Gold/radiation effects , Light , Materials Testing , Particle SizeABSTRACT
In recent photovoltaic research, nanomaterials have offered two new approaches for trapping light within solar cells to increase their absorption: nanostructuring the absorbing semiconductor and using metallic nanostructures to couple light into the absorbing layer. This work combines these two approaches by decorating a single-nanowire silicon solar cell with an octahedral silver nanocrystal. Wavelength-dependent photocurrent measurements and finite-difference time domain simulations show that increases in photocurrent arise at wavelengths corresponding to the nanocrystal's surface plasmon resonances, while decreases occur at wavelengths corresponding to optical resonances of the nanowire. Scanning photocurrent mapping with submicrometer spatial resolution experimentally confirms that changes in the device's photocurrent come from the silver nanocrystal. These results demonstrate that understanding the interactions between nanoscale absorbers and plasmonic nanostructures is essential to optimizing the efficiency of nanostructured solar cells.
ABSTRACT
External quantum efficiency (EQE) of photoluminescence as high as 20% from isolated ZnO nanowires were measured at room temperature. The EQE was found to be highly dependent on photoexcitation density, which underscores the importance of uniform optical excitation during the EQE measurement. An integrating sphere coupled to a microscopic imaging system was used in this work, which enabled the EQE measurement on isolated ZnO nanowires. The EQE values obtained here are significantly higher than those reported for ZnO materials in forms of bulk, thin films or powders. Additional insight on the radiative extraction factor of one-dimensional nanostructures was gained by measuring the internal quantum efficiency of individual nanowires. Such quantitative EQE measurements provide a sensitive, noninvasive method to characterize the optical properties of low-dimensional nanostructures and allow tuning of synthesis parameters for optimization of nanoscale materials.