Synthesis of Keratin Nanoparticles Extracted from Human Hair through Hydrolysis with Concentrated Sulfuric Acid: Characterization and Cytotoxicity.

Human hair, composed primarily of keratin, represents a sustainable waste material suitable for various applications. Synthesizing keratin nanoparticles (KNPs) from human hair for biomedical uses is particularly attractive due to their biocompatibility. In this study, keratin was extracted from human hair using concentrated sulfuric acid as the hydrolysis agent for the first time. This process yielded KNPs in both the supernatant (KNPs-S) and precipitate (KNPs-P) phases. Characterization involved scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), Zeta potential analysis, X-ray diffraction (XRD), and thermogravimetric analysis (TG). KNPs-S and KNPs-P exhibited average diameters of 72 ± 5 nm and 27 ± 5 nm, respectively. The hydrolysis process induced a structural rearrangement favoring ß-sheet structures over α-helices in the KNPs. These nanoparticles demonstrated negative Zeta potentials across the pH spectrum. KNPs-S showed higher cytotoxicity (CC50 = 176.67 µg/mL) and hemolytic activity, likely due to their smaller size compared to KNPs-P (CC50 = 246.21 µg/mL), particularly at concentrations of 500 and 1000 µg/mL. In contrast, KNPs-P did not exhibit hemolytic activity within the tested concentration range of 32.5 to 1000 µg/mL. Both KNPs demonstrated cytocompatibility with fibroblast cells in a dose-dependent manner. Compared to other methods reported in the literature and despite requiring careful washing and neutralization steps, sulfuric acid hydrolysis proved effective, rapid, and feasible for producing cytocompatible KNPs (biomaterials) in single-step synthesis.

Synthesis, Mechanism Elucidation and Biological Insights of Tellurium(IV)-Containing Heterocycles.

Inspired by the synthetic and biological potential of organotellurium substances, a series of five- and six-membered ring organotelluranes containing a Te-O bond were synthesized and characterized. Theoretical calculations elucidated the mechanism for the oxidation-cyclization processes involved in the formation of the heterocycles, consistent with chlorine transfer to hydroxy telluride, followed by a cyclization step with simultaneous formation of the new Te-O bond and deprotonation of the OH group. Moreover, theoretical calculations also indicated anti-diastereoisomers to be major products for two chirality center-containing compounds. Antileishmanial assays against Leishmania amazonensis promastigotes disclosed 1,2λ4 -oxatellurane LQ50 (IC50 =4.1±1.0; SI=12), 1,2λ4 -oxatellurolane LQ04 (IC50 =7.0±1.3; SI=7) and 1,2λ4 -benzoxatellurole LQ56 (IC50 =5.7±0.3; SI=6) as more powerful and more selective compounds than the reference, being up to four times more active. A stability study supported by 125 Te NMR analyses showed that these heterocycles do not suffer structural modifications in aqueous-organic media or at temperatures up to 65 °C.

Development of composite hydrogel based on hydroxyapatite mineralization over pectin reinforced with cellulose nanocrystal.

Hydrogels based on pectin and cellulose nanocrystals (CNC) were used in our study to nucleation and growth of hydroxyapatite (HAp) by the biomimetic method. In this study, we evaluated the direct impact of the different percentages of CNC on pectin hydrogel and the influence of HAp obtained through two methods. CNC were obtained from HCl hydrolysis following chemical functionalization through vinyl groups. The percentage of CNC positively induces thermal stability, mechanical properties and HAp mineralization from biomimetic using simulated body fluid (1.5 SBF). Hydrogels with 5% of CNC showed a higher amount of HAp immersed for 14 days, about 28% of HAp. The obtained hydrogels were compared with hydrogels containing 20% of HAp nanoparticles obtained by chemical precipitation. Biocompatibility of the hydrogels was evaluated by cell viability using fibroblasts (L929). In general, the hydrogels obtained through the biomimetic method show slightly larger biocompatibility compared to the hybrid hydrogels obtained from chemical precipitation.

Drug polarity effect over the controlled release in casein and chondroitin sulfate-based hydrogels.

This study compared the controlled release of two drugs: vitamin-B12, and l-dopa from hydrogels based on 50% of casein (CAS, a protein), 50% of chondroitin sulfate (CS, a polysaccharide) and different amounts of SiO2. The results indicated that the incorporation of 5% of SiO2 to the materials, allowed the best organization, distribution, and diameter of the pores, which are responsible for ensuring a more controlled release. Also, the matrices were not efficient in releasing vitamin-B12, but it successfully released l-dopa. It happened because vitamin-B12 is highly hydrophilic, interacting more with the medium than with the CAS/CS matrix, while l-dopa is less polar than vitamin-B12, interacting more with the CAS/CS matrix. It is worth mentioning that all synthesized hydrogels were non-toxic to the cells as showed by the in vitro assay. This work also demonstrated the importance of evaluating drug delivery devices using drugs of different polarities before stating if they are efficient or not.

pH-responsive hybrid hydrogels: Chondroitin sulfate/casein trapped silica nanospheres for controlled drug release.

In this study, the materials were synthesized by chemically crosslinking chondroitin sulfate (CS), casein (CAS), and silica nanospheres (SiO2), creating a highly crosslinked network. The hydrogel release profile was adaptable (that is, it could be faster or slower as needed) simply by changing the polymeric proportion. The incorporation of 5% of silica nanospheres, in mass, for all CAS/CS matrices promoted a better-controlled and sustained release of l-dopa, focusing on the matrix based on 70% of CAS, 30% of CS and 5% of silica, whose l-dopa release lasted for 87 h. Besides, hydrogels are cytocompatible. These new hydrogels can be considered highly attractive materials to be used for controlled and sustained drug release purposes, as well as scaffolds and wound dressing systems.

Diacetal Ditellurides as Highly Active and Selective Antiparasitic Agents toward Leishmania amazonensis.

Leishmaniasis is a neglected tropical disease and a public health concern in at least 98 countries, affecting mainly the poorest populations. Pharmaceuticals and chemotherapies available for leishmaniasis treatment have several limitations, which clearly justify the efforts to find new potential antileishmanial drugs. In this context, antiprotozoal activities toward different Leishmania species have been reported for hypervalent tellurium compounds, which motivated us to investigate, for the first time, the leishmanicidal properties of some nonhypervalent diaryl ditellurides. Thus, this work describes in vitro activity against Leishmania amazonensis and the cytotoxicities of diaryl ditellurides. Ditelluride LQ7 revealed a strong leishmanicidal activity on promastigotes and amastigotes at submicromolar levels (IC50 = 0.9 ± 0.1 and 0.5 ± 0.1 µmol L-1, respectively) and presented selectivity indexes greater than those of reference drug miltefosine. This preliminary study suggests that diaryl ditellurides may be promising scaffolds for the development of new agents for leishmaniasis treatment.

Heparosan as a potential alternative to hyaluronic acid for the design of biopolymer-based nanovectors for anticancer therapy.

Glycosaminoglycans (GAGs) are important components of the extracellular matrix that have attracted great interest for drug delivery and pharmaceutical applications due to their diverse biological functions. Among GAGs, heparosan (Hep), a biosynthetic precursor of heparin, has recently emerged as a promising building block for the design of nanoparticles with stealth properties. Though this non-sulfated polysaccharide has a chemical structure very close to that of hyaluronic acid (HA), it distinguishes from HA in that it is biologically inert in the extracellular spaces in the body. In this study, we designed Hep- and HA-based nanogels (NGs) that differ only in the chemical nature of the hydrophilic shell. The nanogels were prepared in a very straightforward way from Hep and HA modified with a thermoresponsive copolymer properly designed to induce self-assembly below room temperature. This versatile synthetic approach also enabled further shell-crosslinking allowing an increase in the colloidal stability. After careful characterization of the un-crosslinked and crosslinked Hep and HA NGs in terms of size (Z-average diameters of un-crosslinked and crosslinked NGs ∼110 and 150 nm) and morphology, they were injected intravenously into tumor-bearing mice for biodistribution experiments. Interestingly, these show that the liver uptake of Hep nanogels is remarkably reduced and tumor accumulation significantly improved as compared to HA nanogels (intensity ratios of tumor-to-liver of 2.2 and 1.4 for the un-crosslinked and crosslinked Hep NGs versus 0.11 for the un-crosslinked and crosslinked HA ones). These results highlight the key role played by the shell-forming GAGs on the in vivo fate of nanogels, which correlates with the specific biological properties of Hep and HA.

Two-dimensional thermoresponsive sub-microporous substrate for accelerated cell tissue growth and facile detachment.

Thermoresponsive sub-microporous films having a lower critical solution temperature (LCST), promptly obtained by using the breath figure method, were applied to tissue engineering. These sub-microporous films, sized 100-400 nm, were prepared by blending poly(N-isopropylacrylamide) (PNIPAAm) with polystyrene (PS), in addition to applying the dynamic breath figure (BF) method. The thermoresponsive blends were prepared with polyethylene terephthalate (PET) substrate by using a spin coater; the pore size was modulated according to the spin speed. The sub-microporous films, either with pure PNIPAAm or with different PNIPAAm contents were applied as substrates in order to obtain cell growth (Vero cells); moreover, the effect of PNIPAAm use was evaluated. The PNIPAAm sub-microporous films made the cellular viability to be 9-13-fold higher than the control sample commonly used in cell culture. In addition, the thermoresponsive PNIPAAm properties were even noticed at a low PNIPAAm content in the porous films. Such polymer system was successfully applied to detach the Vero cell tissue using temperature variation.

Synthesis, Antioxidant Activity and Cytotoxicity of N-Functionalized Organotellurides.

The use of antioxidants is the most effective means to protect the organism against cellular damage caused by oxidative stress. In this context, organotellurides have been described as promising antioxidant agents for decades. Herein, a series of N-functionalized organotellurium compounds has been tested as antioxidant and presented remarkable activities by three different in vitro chemical assays. They were able to reduce DPPH radical with IC50 values ranging from 5.08 to 19.20 µg mL-1, and some of them also reduced ABTS+ radical and TPTZ-Fe3+ complex in ABTS+ and FRAP assays, respectively. Initial structure-activity relationship discloses that the nature of N-substituent strongly influenced both activity and cytotoxicity of the studied compounds. Furthermore, radical scavenging activities of N-functionalized organotellurides have been compared with those of their selenilated congeners, demonstrating that the presence of tellurium atom has an essential role in antioxidant activity.

Crispoic acid, a new compound from Laelia marginata (Orchidaceae), and biological evaluations against parasites, human cancer cell lines and Zika virus.

The phytochemical study of Laelia marginata (Lindl.) L. O. Williams (Orchidaceae) led to the isolation of a new natural product named crispoic acid (1), together with six other known compounds (2-7). The new natural product was identified as a dimer of eucomic acid and was structurally characterised based upon 1D and 2D NMR and HRMS data. Biological assays with plant crude extract, fractions and isolated compounds were performed against two human cancer cell lines (Hela and Siha), and the tropical parasites Trypanosoma cruzi and Leishmania (Leishmania) amazonensis. The phenantrenoid 9,10-dihydro-4-methoxyphenanthren-2,7-diol 2 was active against Hela and Siha cells (CC50 5.86 ± 0.19 and 20.78 ± 2.72 µg/mL, respectively). Sub-lethal concentrations of the flavone rhamnazin 4 were not able to rescue the viability of the Vero cells infected by Zika virus.

Coumarin-containing thermoresponsive hyaluronic acid-based nanogels as delivery systems for anticancer chemotherapy.

Multi-stimuli responsive nanogels based on biocompatible hydrophilic polymers have emerged as promising drug delivery systems to improve anticancer therapy with hydrophobic drugs, through increase of circulating-time in the bloodstream, tumor-targeting and reduction of systemic toxicity. This paper reports on the synthesis, characterization and biological perspectives of light- and thermoresponsive hyaluronic acid (HA)-based nanogels containing coumarin as the photocleavable group. Newly synthesized nanogels exhibited interesting features: formation by a temperature-triggered self-assembly process, successful incorporation of poorly water-soluble molecules, light-responsiveness as demonstrated by a significant shift in the critical aggregation temperature after light irradiation, efficient internalization by cancer cells overexpressing the CD44 receptor of HA, ability to circulate for a prolonged period of time in the bloodstream after intravenous injection in mice and considerable detection in tumor tissues. Our findings indicate that coumarin-containing HA-based nanogels may be promising delivery systems for anticancer chemotherapy.

Curcumin-loaded dual pH- and thermo-responsive magnetic microcarriers based on pectin maleate for drug delivery.

Magnetic microgels with pH- and thermo-responsive properties were developed from the pectin maleate, N-isopropyl acrylamide, and Fe3O4 nanoparticles. The hybrid materials were characterized by infrared spectroscopy, scanning electron microscope coupled with X-ray energy dispersive spectroscopy, wide angle X-ray scattering, Zeta potential, and magnetization hysteresis measurements. Curcumin (CUR) was loaded into the microgels, and release assays were carried out in simulated environments (SGF and SIF) at different conditions of temperature (25 or 37°C). A slow and sustainability CUR release was achieved under external magnetic field influence. Loaded CUR displayed stability, bioavailability and greater solubility regarding free CUR. Besides, the cytotoxicity assays showed that magnetic microgels without CUR could suppress the Caco-2 cells growth. So, the pectin maleate, N-isopropyl acrylamide, and Fe3O4 could be tailored to elicit hybrid-based materials with satisfactory application in the medical arena.

Antibacterial Performance of a PCL-PDMAEMA Blend Nanofiber-Based Scaffold Enhanced with Immobilized Silver Nanoparticles.

In the present study, nanofiber meshes (NFs), composed of polycaprolactone and poly[(2-dimethylamino)ethyl methacrylate] at 80/20 and 50/50 PCL/PDMAEMA blend ratios, were obtained through electrospinning. Silver nanoparticles (AgNPs) formed in situ were then immobilized on NF surfaces through adsorption processes at different pHs. It was possible to observe that the amount of NF-AgNPs can be tuned by changing the pH of AgNPs immobilization and the PCL/PDMAEMA ratio in the blend. The neat NF and NF-AgNPs were characterized with respect to their morphology and mechanical properties. The effects of AgNPs on the antibacterial activities and cytotoxicity of meshes were also evaluated. The antibacterial performance of such NF was improved by the presence of AgNPs. The NF-AgNPs presented good antibacterial effect against S. aureus and partial toxicity against E. coli and P. aeruginosa. Also, compared with neat PCL/PDMAEMA the NF-AgNPs presented lower cytotoxicity against VERO cells, showing their potential for applications in tissue engineering for different types of cell growth.

Controlling cell growth with tailorable 2D nanoholes arrays.

A facile and reproducible route that can lead to two-dimensional arrays of nanopores in thin polymer films is demonstrated. The formation of the pores in the polymer films involves breath figure phenomenon and occurs during the film deposition by spin coating. The formation of nanoporous thin films takes only few seconds, and the method does not require complex equipment or expensive chemicals. This method also constitutes a straightforward approach to control the size of the pores formed in thin films. Besides allowing control over the average pore size of the porous films, the use of dynamic deposition with the breath figure phenomenon causes the reduction in the pore size to nanometer scale. The nanoporous arrays obtained by the breath figure are applied as substrates for cell growth, and the effect of their nanopore size on cell growth was evaluated. Notably, it is found that cell viability is related to pore size, where 2D nanoporous structure is more beneficial for cell culture than 2D microporous structures. The change in the average pore size of the polymer films from 1.22 µm to 346 nm results in a threefold increase in cell viability.

Polyelectrolyte complexes of poly[(2-dimethylamino) ethyl methacrylate]/chondroitin sulfate obtained at different pHs: I. Preparation, characterization, cytotoxicity and controlled release of chondroitin sulfate.

For the first time, polyelectrolyte complex based on poly[(2-dimethylamino) ethyl methacrylate] (PDMAEMA) and chondroitin sulfate (CS) was prepared. The properties of novel material and precursors were investigated by WAXS, FTIR, TGA, SEM and DLS analysis. The PDMAEMA/CS PECs presented hydrophilic-hydrophobic transition at pHs 6.0, 7.0 and 8.0 whereas the non-complexed PDMAEMA showed such a transition at pH 8.0 and not at pHs 6.0 and 7.0. Studies of CS release from PECs at pHs 6 and 8 confirmed that the samples possess the potential to release the CS in alkaline and not in acidic conditions. Since PECs are thermo-responsive due to the reduction of LCST caused by the increase in pH, the release of CS was dependent on temperature and pH factors. Cytotoxicity assays using healthy VERO cells showed that the complexation between CS and PDMAEMA increased the PECs' biocompatibility related to PDMAEMA. However, the biocompatibility depends on the amount of CS present in the PECs.

Covalent TiO(2)/pectin microspheres with Fe(3)O(4) nanoparticles for magnetic field-modulated drug delivery.

Covalent TiO(2)-co-pectin microspheres containing Fe(3)O(4) nanoparticles were developed through an ultrasound-induced crosslinking/polymerization reaction between the glycidyl methacrylate from vinyl groups in TiO(2) and in pectin. ζ-potentials became less negative in the nanostructured microspheres, caused by the presence of both inorganic particles in the negatively charged pectin. The nanostructured pectin microspheres showed an amoxicillin release rate slower than that of pure pectin microspheres. The proposed microspheres were found to be a sustained release system of amoxicillin in the acid medium. Furthermore, the antibiotic release may be modulated by exposition of the microspheres to a remote magnetic field. In practical terms, the nanostructured microspheres could deliver a larger proportion of their initial load to specific site of action. The cytotoxic concentrations for 50% of VERO cells (CC(50)), calculated as the concentration required to reduce cell viability by 50% after 72h of incubation, for pectin-only microspheres and nanostructured pectin microspheres were 217.7±6.5 and 121.5±4.9µgmL(-1), respectively. The obtained CC(50) values indicated acceptable cytotoxic levels for an incubation period of 72h, showing that the pectin microspheres have a great pharmacological potential for uses in biological environments, even after the introduction of both Fe(3)O(4) and TiO(2).

Covalent albumin microparticles as an adjuvant for production of mucosal vaccines against hepatitis B.

Covalently modified albumin (BSA) microparticles were developed for potential use as an adjuvant in mucosal vaccines against hepatitis B. To synthesize consistent protein particles, a covalent approach was proposed to modify BSA. Our strategy was to bond maleic anhydride (MA) molecules to BSA structure by nucleophilic reaction for further radical cross-linking/polymerization reaction with N',N'-dimethylacrylamide (DMAAm). The presence of poly(N',N'-dimethylacrylamide) in the protein network enables the microparticles to show well-defined, homogeneous forms. Cytotoxicity tests showed that the cytotoxic concentration for 50% of VERO cells (CC50) was 216.25 ± 5.30 µg mL(-1) in 72 h of incubation. The obtained CC50 value is relatively low for an incubation time of 72 h, suggesting an acceptable biocompatibility. Assay of total protein showed that the encapsulation efficiency of the microparticles with hepatitis B surface antigen (HBsAg) was 77.7 ± 0.2%. For the reference sample, which was incubated without HBsAg, the quantity of protein was below the limit of detection.

Antitrypanasomal activity of novel benzaldehyde-thiosemicarbazone derivatives from kaurenoic acid.

A series of new thiosemicarbazones derived from natural diterpene kaurenoic acid were synthesized and tested against the epimastigote forms of Trypanosoma cruzi to evaluate their antitrypanosomal potential. Seven of the synthesized thiosemicarbazones were more active than kaurenoic acid with IC50 values between 2-24.0 mM. The o-nitro-benzaldehyde-thiosemicarbazone derivative was the most active compound with IC50 of 2.0 mM. The results show that the structural modifications accomplished enhanced the antitrypanosomal activity of these compounds. Besides, the thiocyanate, thiosemicarbazide and the p- methyl, p-methoxy, p-dimethylamine, m-nitro and o-chlorobenzaldehyde-thiosemicarbazone derivatives displayed lower toxicity for LLMCK2 cells than kaurenoic acid, exhibing an IC50 of 59.5 mM.