Review and analysis of the results of kidney transplantation programs in Mexico.

OBJECTIVE: To know, analyze and compare kidney transplant programs; considering the survival of recipients at 1 and 5 years, from hospitals in Mexico. METHOD: A systematic review was carried out whose search focused on the survival of kidney transplant recipients. All publications found in PubMed and Google from 1963 to 2021 were included. The expectation-maximization algorithm was applied, proposing a mixture of normals, and hierarchical grouping to establish if there is any type of pattern and determine if there is a difference between the percentages. of survival at 1 and 5 years between the groups formed. RESULTS: Eight hospitals that published the survival of kidney transplant recipients were found. Survival rates ranged, at 1 year, from 94.7% to 100%, and at 5 years, from 85% to 96.2%. The methods used for their comparison indicated that there is a difference between survival at 1 and 5 years. CONCLUSIONS: In Mexico there is little information on the results of kidney transplant programs, and the information found shows great heterogeneity in said programs. Some strategies and actions are proposed to improve survival underreporting.

OBJETIVO: Conocer, analizar y comparar los programas de trasplante renal, considerando la supervivencia de los receptores a 1 y 5 años, en los hospitales en México. MÉTODO: Se realizó una revisión sistemática cuya búsqueda se centró en la supervivencia de los receptores de trasplante renal. Se incluyeron todas las publicaciones encontradas en PubMed y Google de 1963 a 2021. Se aplicó el algoritmo de expectation-maximization, proponiendo una mezcla de normales, y agrupamiento jerárquico para establecer si hay algún tipo de patrón y determinar si hay diferencia entre los porcentajes de supervivencia a 1 y 5 años entre los grupos formados. RESULTADOS: Se encontraron ocho hospitales que publicaron la supervivencia de los receptores de trasplante renal. Los rangos de las tasas de supervivencia fueron, a 1 año, del 94.7% al 100%, y a los 5 años, del 85% al 96.2%. Los métodos empleados para su comparación indican que hay diferencia entre la supervivencia a 1 y 5 años. CONCLUSIONES: En México se tiene poca información sobre los resultados de los programas de trasplante renal, y la información encontrada muestra gran heterogeneidad en dichos programas. Se proponen algunas estrategias y acciones para mejorar el subregistro de supervivencia.

Zn-doped MnOx nanowires displaying plentiful crystalline defects and tunable small cross-sections for an optimized volcano-type performance towards supercapacitors.

MnOx-based nanomaterials are promising large-scale electrochemical energy storage devices due to their high specific capacity, low toxicity, and low cost. However, their slow diffusion kinetics is still challenging, restricting practical applications. Here, a one-pot and straightforward method was reported to produce Zn-doped MnOx nanowires with abundant defects and tunable small cross-sections, exhibiting an outstanding specific capacitance. More specifically, based on a facile hydrothermal strategy, zinc sites could be uniformly dispersed in the α-MnOx nanowires structure as a function of composition (0.3, 2.1, 4.3, and 7.6 wt.% Zn). Such a process avoided the formation of different crystalline phases during the synthesis. The reproducible method afforded uniform nanowires, in which the size of cross-sections decreased with the increase of Zn composition. Surprisingly, we found a volcano-type relationship between the storage performance and the Zn loading. In this case, we demonstrated that the highest performance material could be achieved by incorporating 2.1 wt.% Zn, exhibiting a remarkable specific capacitance of 1082.2 F.g-1 at a charge/discharge current density of 1.0 A g-1 in a 2.0 mol L-1 KOH electrolyte. The optimized material also afforded improved results for hybrid supercapacitors. Thus, the results presented herein shed new insights into preparing defective and controlled nanomaterials by a simple one-step method for energy storage applications.

Sustainable Cellulose Nanofibers-Mediated Synthesis of Uniform Spinel Zn-Ferrites Nanocorals for High Performances in Supercapacitors.

Spinel ferrites are versatile, low-cost, and abundant metal oxides with remarkable electronic and magnetic properties, which find several applications. Among them, they have been considered part of the next generation of electrochemical energy storage materials due to their variable oxidation states, low environmental toxicity, and possible synthesis through simple green chemical processing. However, most traditional procedures lead to the formation of poorly controlled materials (in terms of size, shape, composition, and/or crystalline structure). Thus, we report herein a cellulose nanofibers-mediated green procedure to prepare controlled highly porous nanocorals comprised of spinel Zn-ferrites. Then, they presented remarkable applications as electrodes in supercapacitors, which were thoroughly and critically discussed. The spinel Zn-ferrites nanocorals supercapacitor showed a much higher maximum specific capacitance (2031.81 F g-1 at a current density of 1 A g-1) than Fe2O3 and ZnO counterparts prepared by a similar approach (189.74 and 24.39 F g-1 at a current density of 1 A g-1). Its cyclic stability was also scrutinized via galvanostatic charging/discharging and electrochemical impedance spectroscopy, indicating excellent long-term stability. In addition, we manufactured an asymmetric supercapacitor device, which offered a high energy density value of 18.1 Wh kg-1 at a power density of 2609.2 W kg-1 (at 1 A g-1 in 2.0 mol L-1 KOH electrolyte). Based on our findings, we believe that higher performances observed for spinel Zn-ferrites nanocorals could be explained by their unique crystal structure and electronic configuration based on crystal field stabilization energy, which provides an electrostatic repulsion between the d electrons and the p orbitals of the surrounding oxygen anions, creating a level of energy that determines their final supercapacitance then evidenced, which is a very interesting property that could be explored for the production of clean energy storage devices.

Facile Gram-Scale Synthesis of NiO Nanoflowers for Highly Selective and Sensitive Electrocatalytic Detection of Hydrazine.

The design and development of efficient and electrocatalytic sensitive nickel oxide nanomaterials have attracted attention as they are considered cost-effective, stable, and abundant electrocatalytic sensors. However, although innumerable electrocatalysts have been reported, their large-scale production with the same activity and sensitivity remains challenging. In this study, we report a simple protocol for the gram-scale synthesis of uniform NiO nanoflowers (approximately 1.75 g) via a hydrothermal method for highly selective and sensitive electrocatalytic detection of hydrazine. The resultant material was characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. For the production of the modified electrode, NiO nanoflowers were dispersed in Nafion and drop-cast onto the surface of a glassy carbon electrode (NiO NF/GCE). By cyclic voltammetry, it was possible to observe the excellent performance of the modified electrode toward hydrazine oxidation in alkaline media, providing an oxidation overpotential of only +0.08 V vs Ag/AgCl. In these conditions, the peak current response increased linearly with hydrazine concentration ranging from 0.99 to 98.13 µmol L-1. The electrocatalytic sensor showed a high sensitivity value of 0.10866 µA L µmol-1. The limits of detection and quantification were 0.026 and 0.0898 µmol L-1, respectively. Considering these results, NiO nanoflowers can be regarded as promising surfaces for the electrochemical determination of hydrazine, providing interesting features to explore in the electrocatalytic sensor field.

MnO2-Ir Nanowires: Combining Ultrasmall Nanoparticle Sizes, O-Vacancies, and Low Noble-Metal Loading with Improved Activities towards the Oxygen Reduction Reaction.

Although clean energy generation utilizing the Oxygen Reduction Reaction (ORR) can be considered a promising strategy, this approach remains challenging by the dependence on high loadings of noble metals, mainly Platinum (Pt). Therefore, efforts have been directed to develop new and efficient electrocatalysts that could decrease the Pt content (e.g., by nanotechnology tools or alloying) or replace them completely in these systems. The present investigation shows that high catalytic activity can be reached towards the ORR by employing 1.8 ± 0.7 nm Ir nanoparticles (NPs) deposited onto MnO2 nanowires surface under low Ir loadings (1.2 wt.%). Interestingly, we observed that the MnO2-Ir nanohybrid presented high catalytic activity for the ORR close to commercial Pt/C (20.0 wt.% of Pt), indicating that it could obtain efficient performance using a simple synthetic procedure. The MnO2-Ir electrocatalyst also showed improved stability relative to commercial Pt/C, in which only a slight activity loss was observed after 50 reaction cycles. Considering our findings, the superior performance delivered by the MnO2-Ir nanohybrid may be related to (i) the significant concentration of reduced Mn3+ species, leading to increased concentration of oxygen vacancies at its surface; (ii) the presence of strong metal-support interactions (SMSI), in which the electronic effect between MnOx and Ir may enhance the ORR process; and (iii) the unique structure comprised by Ir ultrasmall sizes at the nanowire surface that enable the exposure of high energy surface/facets, high surface-to-volume ratios, and their uniform dispersion.

Forearm and Hand Muscles Exhibit High Coactivation and Overlapping of Cortical Motor Representations.

Most of the motor mapping procedures using navigated transcranial magnetic stimulation (nTMS) follow the conventional somatotopic organization of the primary motor cortex (M1) by assessing the representation of a particular target muscle, disregarding the possible coactivation of synergistic muscles. In turn, multiple reports describe a functional organization of the M1 with an overlapping among motor representations acting together to execute movements. In this context, the overlap degree among cortical representations of synergistic hand and forearm muscles remains an open question. This study aimed to evaluate the muscle coactivation and representation overlapping common to the grasping movement and its dependence on the stimulation parameters. The nTMS motor maps were obtained from one carpal muscle and two intrinsic hand muscles during rest. We quantified the overlapping motor maps in size (area and volume overlap degree) and topography (similarity and centroid Euclidean distance) parameters. We demonstrated that these muscle representations are highly overlapped and similar in shape. The overlap degrees involving the forearm muscle were significantly higher than only among the intrinsic hand muscles. Moreover, the stimulation intensity had a stronger effect on the size compared to the topography parameters. Our study contributes to a more detailed cortical motor representation towards a synergistic, functional arrangement of M1. Understanding the muscle group coactivation may provide more accurate motor maps when delineating the eloquent brain tissue during pre-surgical planning.

Establishing consensus on the perioperative management of cholecystectomy in public hospitals: a Delphi study with an expert panel in Mexico.

BACKGROUND: Several guidelines have put forward recommendations about the perioperative process of cholecystectomy. Despite the recommendations, controversy remains concerning several topics, especially in low- and middle-income countries. The aim of this study was to develop uniform recommendations for perioperative practices in cholecystectomy in Mexico to standardize this process and save public health system resources. METHODS: A modified Delphi method was used. An expert panel of 23 surgeons anonymously completed two rounds of responses to a 29-item questionnaire with 110 possible answers. The consensus was assessed using the percentage of responders agreeing on each question. RESULTS: From the 29 questions, the study generated 27 recommendations based on 20 (69.0%) questions reaching consensus, one that was considered uncertain (3.4%), and six (20.7%) items that remained open questions. In two (6.9%) cases, no consensus was reached, and no recommendation could be made. CONCLUSIONS: This study provides recommendations for the perioperative management of cholecystectomy in public hospitals in Mexico. As a guide for public institutions in low- and middle-income countries, the study identifies recommendations for perioperative tests and evaluations, perioperative decision making, postoperative interventions and institutional investment, that might ensure the safe practice of cholecystectomy and contribute to conserving resources.

The role and fate of capping ligands in colloidally prepared metal nanoparticle catalysts.

Metal nanoparticles have received intense scientific attention in the field of catalysis. Precise engineering of nanomaterials' size, shape and surface composition, including adsorbed capping ligands, is of utmost importance to control activity and selectivity, and distinguish colloidally prepared metal nanoparticle catalysts from traditional heterogeneous catalysts. The interface between the material and the reaction medium is where the key interactions occur; therefore, catalysis occurs under the influence of capping ligands. In this Perspective review, we focus on the choice of capping ligands (or stabilizing agents), and their role and fate in different steps from preparation to catalysis. Evaluating the influence of the ligands on the catalytic response is not trivial, but the literature provides examples where the ligands adsorbed on the nanoparticle surface dramatically change the activity and selectivity for a particular reaction, while acting either as a dynamic shell or a passivation coating. Steric and electronic effects resulting from the presence of adsorbed ligands have been proposed to influence the catalytic properties. Attempts to remove the capping ligands are discussed, even though they are not always successful or even necessary. Finally, we outline our personal understanding and perspectives on the use of ligands or functionalized supports to tune the activity and selectivity of supported metal nanoparticles.

An alternative approach in muscle fatigue evaluation from the surface EMG signal.

The aim of this study was to compare the intervals of time between adjacent zero crossings (ZCI), an alternative frequency-temporal parameter, with the root-mean-square (RMS) value and the median frequency (F(med)) from the surface EMG (sEMG) signal in muscle fatigue analysis. Twenty right-handed volunteers performed isometric contractions of right biceps brachii muscle while sEMG signals were collected from it at three different and arbitrary load levels until fatigue. The mean ZCI presented a significant correlation with F(med) but not with RMS value and it also presented lower coefficients of variation than others. The results pointed that mean ZCI properties can contribute more than F(med) and RMS value on the interpretation of the muscle function under fatigue conditions.

Effect of the shoulder position on the biceps brachii emg in different dumbbell curls.

Incline Dumbbell Curl (IDC) and Dumbbell Preacher Curl (DPC) are two variations of the standard Dumbbell Biceps Curl (DBC), generally applied to optimize biceps brachii contribution for elbow flexion by fixing shoulder at a specific angle. The aim of this study is to identify changes in the neuromuscular activity of biceps brachii long head for IDC, DPC and DBC exercises, by taking into account the changes in load moment arm and muscle length elicited by each dumbbell curl protocol. A single cycle (concentric-eccentric) of DBC, IDC and DPC, was applied to 22 subjects using a submaximal load of 40% estimated from an isometric MVC test. The neuromuscular activity of biceps brachii long head was compared by further partitioning each contraction into three phases, according to individual elbow joint range of motion. Although all protocols elicited a considerable level of activation of the biceps brachii muscle (at least 50% of maximum RMS), the contribution of this muscle for elbow flexion/extension varied among exercises. The submaximal elbow flexion (concentric) elicited neuro muscular activity up to 95% of the maximum RMS value during the final phase of IDC and DBC and 80% for DPC at the beginning of the movement. All exercises showed significant less muscle activity for the elbow extension (eccentric). The Incline Dumbbell Curl and the classical Dumbbell Biceps Curl resulted in similar patterns of biceps brachii activation for the whole range of motion, whereas Dumbbell Preacher Curl elicited high muscle activation only for a short range of elbow joint angle. Key pointsThe Incline Dumbbell Curl and the Dumbbell Biceps Curl resulted in a considerable neuromuscular effort throughout the whole elbow range of motion.The Incline Dumbbell Curl and the Dumbbell Biceps Curl may be preferable for the improvement of biceps brachii force in training programs.