ABSTRACT
We experimentally apply incoherent Fourier ptychography to enhance the resolution of recorded images by projecting known, uncorrelated, random patterns at high speed onto 3D moving and distant objects. We find that the resolution enhancement factor can be greater than 2, depending on the projection and camera optics.
ABSTRACT
Speckle correlation imaging offers the ability to see objects through diffusive materials and around corners. Imaging self-illuminating thermal objects in non-line-of-sight scenarios is of particular interest. Here, using bispectrum and phase retrieval methods, we demonstrate speckle correlation imaging of mid-infrared objects through diffusers and around corners at resolutions near the diffraction limit. The images agree well with those recorded by conventional cameras with line-of-sight to the same objects.
ABSTRACT
The Shack-Hartmann wavefront sensor (SH-WFS) is known to produce incorrect measurements of the wavefront gradient in the presence of non-uniform illumination. Moreover, the most common least-squares phase reconstructors cannot accurately reconstruct the wavefront in the presence of branch points. We therefore developed the intensity/slopes network (ISNet), a deep convolutional-neural-network-based reconstructor that uses both the wavefront gradient information and the intensity of the SH-WFS's subapertures to provide better wavefront reconstruction. We trained the network on simulated data with multiple levels of turbulence and compared the performance of our reconstructor to several other reconstruction techniques. ISNet produced the lowest wavefront error of the reconstructors we evaluated and operated at a speed suitable for real-time applications, enabling the use of the SH-WFS in stronger turbulence than was previously possible.
ABSTRACT
A scattering layer is usually considered an obstacle to imaging. However, using speckle correlation imaging techniques, the scattering layer effectively acts as a lens. To date, the speckle correlation imaging method has been limited to imaging sparse samples. Here, we demonstrate imaging of incoherently illuminated extended objects in transmission and around-the-corner geometries. We are able to image extended objects by constraining the illumination spot on the object and then scanning the object. A ptychography algorithm is used to reconstruct the extended object. This work demonstrates the applicability of ptychography to spatially incoherent light and enables a new method of imaging in spectral regions where there is limited choice in optics, such as the terahertz, extreme ultraviolet, and x-ray regions.
ABSTRACT
Imaging charge, spin, and energy flow in materials is a current grand challenge that is relevant to a host of nanoenhanced systems, including thermoelectric, photovoltaic, electronic, and spin devices. Ultrafast coherent x-ray sources enable functional imaging on nanometer length and femtosecond timescales particularly when combined with advances in coherent imaging techniques. Here, we combine ptychographic coherent diffractive imaging with an extreme ultraviolet high harmonic light source to directly visualize the complex thermal and acoustic response of an individual nanoscale antenna after impulsive heating by a femtosecond laser. We directly image the deformations induced in both the nickel tapered nanoantenna and the silicon substrate and see the lowest-order generalized Lamb wave that is partially confined to a uniform nanoantenna. The resolution achieved-sub-100 nm transverse and 0.5-Å axial spatial resolution, combined with ≈10-fs temporal resolution-represents a significant advance in full-field dynamic imaging capabilities. The tapered nanoantenna is sufficiently complex that a full simulation of the dynamic response would require enormous computational power. We therefore use our data to benchmark approximate models and achieve excellent agreement between theory and experiment. In the future, this work will enable three-dimensional functional imaging of opaque materials and nanostructures that are sufficiently complex that their functional properties cannot be predicted.
ABSTRACT
Colloidal crystals with specific electronic, optical, magnetic, vibrational properties, can be rationally designed by controlling fundamental parameters such as chemical composition, scale, periodicity and lattice symmetry. In particular, silica nanospheres -which assemble to form colloidal crystals- are ideal for this purpose, because of the ability to infiltrate their templates with semiconductors or metals. However characterization of these crystals is often limited to techniques such as grazing incidence small-angle scattering that provide only global structural information and also often require synchrotron sources. Here we demonstrate small-angle Bragg scattering from nanostructured materials using a tabletop-scale setup based on high-harmonic generation, to reveal important information about the local order of nanosphere grains, separated by grain boundaries and discontinuities. We also apply full-field quantitative ptychographic imaging to visualize the extended structure of a silica close-packed nanosphere multilayer, with thickness information encoded in the phase. These combined techniques allow us to simultaneously characterize the silica nanospheres size, their symmetry and distribution within single colloidal crystal grains, the local arrangement of nearest-neighbor grains, as well as to quantitatively determine the number of layers within the sample. Key to this advance is the good match between the high harmonic wavelength used (13.5nm) and the high transmission, high scattering efficiency, and low sample damage of the silica colloidal crystal at this wavelength. As a result, the relevant distances in the sample - namely, the interparticle distance (≈124nm) and the colloidal grains local arrangement (≈1µm) - can be investigated with Bragg coherent EUV scatterometry and ptychographic imaging within the same experiment simply by tuning the EUV spot size at the sample plane (5µm and 15µm respectively). In addition, the high spatial coherence of high harmonics light, combined with advances in imaging techniques, makes it possible to image near-periodic structures quantitatively and nondestructively, and enables the observation of the extended order of quasi-periodic colloidal crystals, with a spatial resolution better than 20nm. In the future, by harnessing the high time-resolution of tabletop high harmonics, this technique can be extended to dynamically image the three-dimensional electronic, magnetic, and transport properties of functional nanosystems.
ABSTRACT
We report 3D coherent diffractive imaging (CDI) of Au/Pd core-shell nanoparticles with 6.1 nm spatial resolution with elemental specificity. We measured single-shot diffraction patterns of the nanoparticles using intense x-ray free electron laser pulses. By exploiting the curvature of the Ewald sphere and the symmetry of the nanoparticle, we reconstructed the 3D electron density of 34 core-shell structures from these diffraction patterns. To extract 3D structural information beyond the diffraction signal, we implemented a super-resolution technique by taking advantage of CDI's quantitative reconstruction capabilities. We used high-resolution model fitting to determine the Au core size and the Pd shell thickness to be 65.0 ± 1.0 nm and 4.0 ± 0.5 nm, respectively. We also identified the 3D elemental distribution inside the nanoparticles with an accuracy of 3%. To further examine the model fitting procedure, we simulated noisy diffraction patterns from a Au/Pd core-shell model and a solid Au model and confirmed the validity of the method. We anticipate this super-resolution CDI method can be generally used for quantitative 3D imaging of symmetrical nanostructures with elemental specificity.
ABSTRACT
The ability to record large field-of-view images without a loss in spatial resolution is of crucial importance for imaging science. For most imaging techniques however, an increase in field-of-view comes at the cost of decreased resolution. Here we present a novel extension to ptychographic coherent diffractive imaging that permits simultaneous full-field imaging of multiple locations by illuminating the sample with spatially separated, interfering probes. This technique allows for large field-of-view imaging in amplitude and phase while maintaining diffraction-limited resolution, without an increase in collected data i.e. diffraction patterns acquired.
ABSTRACT
We report a proof-of-principle demonstration of a new scheme of spectromicroscopy in the extreme ultraviolet (EUV) spectral range, where the spectral response of the sample at different wavelengths is imaged simultaneously. This scheme is enabled by combining ptychographic information multiplexing (PIM) with a tabletop EUV source based on high harmonic generation, where four spectrally narrow harmonics near 30 nm form a spectral comb structure. Extending PIM from previously demonstrated visible wavelengths to the EUV/X-ray wavelengths promises much higher spatial resolution and a more powerful spectral contrast mechanism, making PIM an attractive spectromicroscopy method in both microscopy and spectroscopy aspects. In addition to spectromicroscopy, this method images the multicolor EUV beam in situ, making this a powerful beam characterization technique. In contrast to other methods, the techniques described here use no hardware to separate wavelengths, leading to efficient use of the EUV radiation.
ABSTRACT
We demonstrate quantitative, chemically specific imaging of buried nanostructures, including oxidation and diffusion reactions at buried interfaces, using nondestructive tabletop extreme ultraviolet (EUV) coherent diffractive imaging (CDI). Copper nanostructures inlaid in SiO2 are coated with 100 nm of aluminum, which is opaque to visible light and thick enough that neither visible microscopy nor atomic force microscopy can image the buried interface. Short wavelength high harmonic beams can penetrate the aluminum layer, yielding high-contrast images of the buried structures. Quantitative analysis shows that the reflected EUV light is extremely sensitive to the formation of multiple oxide layers, as well as interdiffusion of materials occurring at the metal-metal and metal-insulator boundaries deep within the nanostructure with few nanometers precision.
ABSTRACT
Scanning electron microscopy and atomic force microscopy are well-established techniques for imaging surfaces with nanometer resolution. Here we demonstrate a complementary and powerful approach based on tabletop extreme-ultraviolet ptychography that enables quantitative full field imaging with higher contrast than other techniques, and with compositional and topographical information. Using a high numerical aperture reflection-mode microscope illuminated by a tabletop 30 nm high harmonic source, we retrieve high quality, high contrast, full field images with 40 nm by 80 nm lateral resolution (≈1.3 λ), with a total exposure time of less than 1 min. Finally, quantitative phase information enables surface profilometry with ultra-high, 6 Å axial resolution. In the future, this work will enable dynamic imaging of functioning nanosystems with unprecedented combined spatial (<10 nm) and temporal (<10 fs) resolution, in thick opaque samples, with elemental, chemical and magnetic sensitivity.
ABSTRACT
We demonstrate the first general tabletop EUV coherent microscope that can image extended, non-isolated, non-periodic, objects. By implementing keyhole coherent diffractive imaging with curved mirrors and a tabletop high harmonic source, we achieve improved efficiency of the imaging system as well as more uniform illumination at the sample, when compared with what is possible using Fresnel zone plates. Moreover, we show that the unscattered light from a semi-transparent sample can be used as a holographic reference wave, allowing quantitative information about the thickness of the sample to be extracted from the retrieved image. Finally, we show that excellent tabletop image fidelity is achieved by comparing the retrieved images with scanning electron and atomic force microscopy images, and show superior capabilities in some cases.
Subject(s)
Lenses , Lighting/instrumentation , Microscopy/instrumentation , Refractometry/instrumentation , Equipment Design , Equipment Failure AnalysisABSTRACT
In this work, we demonstrate an improved method for iterative phase retrieval with application to coherent diffractive imaging. By introducing additional operations inside the support term of existing iterated projection algorithms, we demonstrate improved convergence speed, higher success rate and, in some cases, improved reconstruction quality. New algorithms take a particularly simple form with the introduction of a generalized projection-based reflector. Numerical simulations verify that these new algorithms surpass the current standards without adding complexity to the reconstruction process. Thus the introduction of this new class of algorithms offers a new array of methods for efficiently deconvolving intricate data.
ABSTRACT
We extend coherent diffraction imaging (CDI) to a high numerical aperture reflection mode geometry for the first time. We derive a coordinate transform that allows us to rewrite the recorded far-field scatter pattern from a tilted object as a uniformly spaced Fourier transform. Using this approach, FFTs in standard iterative phase retrieval algorithms can be used to significantly speed up the image reconstruction times. Moreover, we avoid the isolated sample requirement by imaging a pinhole onto the specimen, in a technique termed apertured illumination CDI. By combining the new coordinate transformation with apertured illumination CDI, we demonstrate rapid high numerical aperture imaging of samples illuminated by visible laser light. Finally, we demonstrate future promise for this technique by using high harmonic beams for high numerical aperture reflection mode imaging.