ABSTRACT
Innovative therapies combining gene-corrected stem cells and the production of bioengineered tissues to treat epidermolysis bullosa are emerging. However, quantitative tests to measure the adhesion forces between two highly viscoelastic substrates such as those found in bilayered bioengineered skin are needed and are still lacking. The objective of this study was to develop a mechanical test to measure the dermal-epidermal adhesion strength of our bilayered tissue-engineered skin substitute (TES) produced with the self-assembly method. We developed a peel test, which allows the displacement of both skin layers in a T configuration, based on the ASTM International standard. A MATLAB program was written to process and analyze raw data. The experimental setup was tested by measuring the dermal-epidermal adhesion strength in TESs produced with normal or collagen VII-deficient cells. Our peel testing method allowed us to detect the impact of the absence of collagen VII in the dermal-epidermal adhesion strength of TESs and also to examine the progression of the dermal-epidermal adhesion strength in relation to culture time in normal TES. Impact statement This study describes a method for assessing the adhesion strength at the dermal-epidermal junction of individual tissue-engineered skin substitute (TES). An ASTM standardized protocol of peel testing was designed to measure this important mechanical property. Our innovative approach will serve as a quality control in the production, improvement, and application of TESs for the treatment of pathologies affecting the dermal-epidermal adhesion such as epidermolysis bullosa. Data presented contribute to research on the interfaces between biological substrates and provide a reference factor for the characterization of products derived from tissue engineering.
Subject(s)
Dermis/physiology , Epidermis/physiology , Tissue Engineering/methods , Adhesiveness , Adolescent , Adult , Dermis/ultrastructure , Epidermis/ultrastructure , Female , Humans , Infant , Male , Middle Aged , Skin, ArtificialABSTRACT
There is a strong clinical need to develop small-caliber tissue-engineered blood vessels for arterial bypass surgeries. Such substitutes can be engineered using the self-assembly approach in which cells produce their own extracellular matrix (ECM), creating a robust vessel without exogenous material. However, this approach is currently limited to the production of flat sheets that need to be further rolled into the final desired tubular shape. In this study, human fibroblasts and smooth muscle cells were seeded directly on UV-C-treated cylindrical polyethylene terephthalate glycol-modified (PETG) mandrels of 4.8 mm diameter. UV-C treatment induced surface modification, confirmed by Fourier-transform infrared spectroscopy (FTIR) analysis, was necessary to ensure proper cellular attachment and optimized ECM secretion/assembly. This novel approach generated solid tubular conduits with high level of cohesion between concentric cellular layers and enhanced cell-driven circumferential alignment that can be manipulated after 21 days of culture. This simple and cost-effective mandrel-seeded approach also allowed for endothelialization of the construct and the production of perfusable trilayered tissue-engineered blood vessels with a closed lumen. This study lays the foundation for a broad field of possible applications enabling custom-made reconstructed tissues of specialized shapes using a surface treated 3D structure as a template for tissue engineering.
Subject(s)
Tissue Engineering/methods , Animals , Blood Vessel Prosthesis , Fibroblasts/cytology , Fibroblasts/metabolism , Humans , Spectroscopy, Fourier Transform Infrared , Tissue ScaffoldsABSTRACT
In the clinical and pharmacological fields, there is a need for the production of tissue-engineered small-diameter blood vessels. We have demonstrated previously that the extracellular matrix (ECM) produced by fibroblasts can be used as a scaffold to support three-dimensional (3D) growth of another cell type. Thus, a resistant tissue-engineered vascular media can be produced when such scaffolds are used to culture smooth muscle cells (SMCs). The present study was designed to develop an anisotropic fibroblastic ECM sheet that could replicate the physiological architecture of blood vessels after being assembled into a small diameter vascular conduit. Anisotropic ECM scaffolds were produced using human dermal fibroblasts, grown on a microfabricated substrate with a specific topography, which led to cell alignment and unidirectional ECM assembly. Following their devitalization, the scaffolds were seeded with SMCs. These cells elongated and migrated in a single direction, following a specific angle relative to the direction of the aligned fibroblastic ECM. Their resultant ECM stained for collagen I and III and elastin, and the cells expressed SMC differentiation markers. Seven days after SMCs seeding, the sheets were rolled around a mandrel to form a tissue-engineered vascular media. The resulting anisotropic ECM and cell alignment induced an increase in the mechanical strength and vascular reactivity in the circumferential direction as compared to unaligned constructs. Copyright © 2016 John Wiley & Sons, Ltd.
Subject(s)
Blood Vessel Prosthesis , Extracellular Matrix Proteins , Extracellular Matrix , Fibroblasts/metabolism , Tissue Scaffolds/chemistry , Extracellular Matrix/chemistry , Extracellular Matrix/metabolism , Extracellular Matrix Proteins/biosynthesis , Extracellular Matrix Proteins/chemistry , Fibroblasts/cytology , Humans , Muscle, Smooth, Vascular/cytology , Muscle, Smooth, Vascular/metabolism , Myocytes, Smooth Muscle/cytology , Myocytes, Smooth Muscle/metabolismABSTRACT
As time to final coverage is the essence for better survival outcome in severely burned patients, we have continuously strived to reduce the duration for the preparation of our bilayered self-assembled skin substitutes (SASS). These SASS produced in vitro by the self-assembly approach have a structure and functionality very similar to native skin. Recently, we have shown that a decellularized dermal matrix preproduced by the self-assembly approach could be used as a template to further obtain self-assembled skin substitute using a decellularized dermal template (SASS-DM) in vitro. Thus, the production period with patient cells was then reduced to about 1 month. Herein, preclinical animal experiments have been performed to confirm the integration and evolution of such a graft and compare the maturation of SASS and SASS-DM in vivo. Both tissues, reconstructed from adult or newborn cells, were grafted on athymic mice. Green fluorescent protein-transfected keratinocytes were also used to follow grafted tissues weekly for 6 weeks using an in vivo imaging system (IVIS). Cell architecture and differentiation were studied with histological and immunofluorescence analyses at each time point. Graft integration, macroscopic evolution, histological analyses, and expression of skin differentiation markers were similar between both skin substitutes reconstructed from either newborn or adult cells, and IVIS observations confirmed the efficient engraftment of SASS-DM. In conclusion, our in vivo graft experiments on a mouse model demonstrated that the SASS-DM had equivalent macroscopic, histological, and differentiation evolution over a 6-week period, when compared with the SASS. The tissue-engineered SASS-DM could improve clinical availability and advantageously shorten the time necessary for the definitive wound coverage of severely burned patients.
Subject(s)
Skin, Artificial , Tissue Engineering/methods , Animals , Cells, Cultured , Fibroblasts/cytology , Green Fluorescent Proteins , Humans , Keratinocytes/cytology , Male , Mice , Mice, NudeABSTRACT
There is a clinical need for tissue-engineered small-diameter (<6 mm) vascular grafts since clinical applications are halted by the limited suitability of autologous or synthetic grafts. This study uses the self-assembly approach to produce a fibroblast-derived decellularized vascular scaffold (FDVS) that can be available off-the-shelf. Briefly, extracellular matrix scaffolds were produced using human dermal fibroblasts sheets rolled around a mandrel, maintained in culture to allow for the formation of cohesive and three-dimensional tubular constructs, and decellularized by immersion in deionized water. The FDVSs were implanted as an aortic interpositional graft in six Sprague-Dawley rats for 6 months. Five out of the six implants were still patent 6 months after the surgery. Histological analysis showed the infiltration of cells on both abluminal and luminal sides, and immunofluorescence analysis suggested the formation of neomedia comprised of smooth muscle cells and lined underneath with an endothelium. Furthermore, to verify the feasibility of producing tissue-engineered blood vessels of clinically relevant length and diameter, scaffolds with a 4.6 mm inner diameter and 17 cm in length were fabricated with success and stored for an extended period of time, while maintaining suitable properties following the storage period. This novel demonstration of the potential of the FDVS could accelerate the clinical availability of tissue-engineered blood vessels and warrants further preclinical studies.
Subject(s)
Bioprosthesis , Blood Vessel Prosthesis Implantation , Blood Vessel Prosthesis , Fibroblasts/metabolism , Tissue Engineering/methods , Vascular Remodeling , Animals , Fibroblasts/pathology , Humans , Rats , Rats, Sprague-Dawley , Time Factors , Tissue ScaffoldsABSTRACT
There is a clinical need for skin substitutes to replace full-thickness skin loss. Our group has developed a bilayered skin substitute produced from the patient's own fibroblasts and keratinocytes referred to as Self-Assembled Skin Substitute (SASS). After cell isolation and expansion, the current time required to produce SASS is 45 days. We aimed to optimize the manufacturing process to standardize the production of SASS and to reduce production time. The new approach consisted in seeding keratinocytes on a fibroblast-derived tissue sheet before its detachment from the culture plate. Four days following keratinocyte seeding, the resulting tissue was stacked on two fibroblast-derived tissue sheets and cultured at the air-liquid interface for 10 days. The resulting total production time was 31 days. An alternative method adapted to more contractile fibroblasts was also developed. It consisted in adding a peripheral frame before seeding fibroblasts in the culture plate. SASSs produced by both new methods shared similar histology, contractile behavior in vitro and in vivo evolution after grafting onto mice when compared with SASSs produced by the 45-day standard method. In conclusion, the new approach for the production of high-quality human skin substitutes should allow an earlier autologous grafting for the treatment of severely burned patients.
ABSTRACT
Bypass surgeries using native vessels rely on the availability of autologous veins and arteries. An alternative to those vessels could be tissue-engineered vascular constructs made by self-organized tissue sheets. This paper intends to evaluate the potential use of mesenchymal stem cells (MSCs) isolated from two different sources: (1) bone marrow-derived MSCs and (2) umbilical cord blood-derived MSCs. When cultured in vitro, a proportion of those cells differentiated into smooth muscle cell- (SMC-) like cells and expressed contraction associated proteins. Moreover, these cells assembled into manipulable tissue sheets when cultured in presence of ascorbic acid. Tubular vessels were then produced by rolling those tissue sheets on a mandrel. The architecture, contractility, and mechanical resistance of reconstructed vessels were compared with tissue-engineered media and adventitia produced from SMCs and dermal fibroblasts, respectively. Histology revealed a collagenous extracellular matrix and the contractile responses measured for these vessels were stronger than dermal fibroblasts derived constructs although weaker than SMCs-derived constructs. The burst pressure of bone marrow-derived vessels was higher than SMCs-derived ones. These results reinforce the versatility of the self-organization approach since they demonstrate that it is possible to recapitulate a contractile media layer from MSCs without the need of exogenous scaffolding material.
Subject(s)
Adult Stem Cells/cytology , Adult Stem Cells/physiology , Blood Vessels/growth & development , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/physiology , Tissue Scaffolds , Adult , Bioprosthesis , Blood Vessels/cytology , Cell Differentiation/physiology , Cells, Cultured , Cord Blood Stem Cell Transplantation/instrumentation , Cord Blood Stem Cell Transplantation/methods , Equipment Failure Analysis , Feasibility Studies , Female , Fetal Blood/cytology , Humans , Infant, Newborn , Male , Mesenchymal Stem Cell Transplantation/instrumentation , Mesenchymal Stem Cell Transplantation/methods , Printing, Three-Dimensional , Prosthesis Design , Stem Cell Transplantation/instrumentation , Tissue Engineering/instrumentation , Tissue Engineering/methodsABSTRACT
Our bilayered self-assembled skin substitutes (SASS) are skin substitutes showing a structure and functionality very similar to native human skin. These constructs are used, in life-threatening burn wounds, as permanent autologous grafts for the treatment of such affected patients even though their production is exacting. We thus intended to shorten their current production time to improve their clinical applicability. A self-assembled decellularized dermal matrix (DM) was used. It allowed the production of an autologous skin substitute from patient's cells. The characterization of SASS reconstructed using a decellularized dermal matrix (SASS-DM) was performed by histology, immunofluorescence, transmission electron microscopy, and uniaxial tensile analysis. Using the SASS-DM, it was possible to reduce the standard production time from about 8 to 4 and a half weeks. The structure, cell differentiation, and mechanical properties of the new skin substitutes were shown to be similar to the SASS. The decellularization process had no influence on the final microstructure and mechanical properties of the DM. This model, by enabling the production of a skin substitute in a shorter time frame without compromising its intrinsic tissue properties, represents a promising addition to the currently available burn and wound treatments.
Subject(s)
Acellular Dermis , Extracellular Matrix/chemistry , Skin, Artificial , Tissue Engineering/methods , Tissue Scaffolds/chemistry , Humans , MaleABSTRACT
There is an ongoing clinical need for tissue-engineered small-diameter (<6mm) vascular grafts since clinical applications are restricted by the limited availability of autologous living grafts or the lack of suitability of synthetic grafts. The present study uses our self-assembly approach to produce a fibroblast-derived decellularized vascular scaffold that can then be available off-the-shelf. Briefly, scaffolds were produced using human dermal fibroblasts sheets rolled around a mandrel, maintained in culture to allow for the formation of cohesive and three-dimensional tubular constructs, and then decellularized by immersion in deionized water. Constructs were then endothelialized and perfused for 1week in an appropriate bioreactor. Mechanical testing results showed that the decellularization process did not influence the resistance of the tissue and an increase in ultimate tensile strength was observed following the perfusion of the construct in the bioreactor. These fibroblast-derived vascular scaffolds could be stored and later used to deliver readily implantable grafts within 4weeks including an autologous endothelial cell isolation and seeding process. This technology could greatly accelerate the clinical availability of tissue-engineered blood vessels.
Subject(s)
Bioreactors , Blood Vessel Prosthesis , Endothelium, Vascular/physiology , Materials Testing , Tissue Engineering/instrumentation , Tissue Engineering/methods , Tissue Scaffolds/chemistry , Adult , Compliance , DNA/metabolism , Fibroblasts/cytology , Fluorescent Antibody Technique , Humans , Perfusion , Pressure , SuturesABSTRACT
Conventional approaches for toxicity evaluation of drugs and chemicals, such as animal tests, can be impractical due to the large experimental scale and the immunological differences between species. Organ-on-a-chip models have recently been recognized as a prominent alternative to conventional toxicity tests aiming to simulate the human in vivo physiology. This review focuses on the organ-on-a-chip applications for high-throughput screening of candidate drugs against toxicity, with a particular emphasis on bone-marrow-on-a-chip. Studies in which organ-on-a-chip models have been developed and utilized to maximize the efficiency and predictability in toxicity assessment are introduced. The potential of these devices to replace tests of acute systemic toxicity in animals, and the challenges that are inherent in simulating the human immune system are also discussed. As a promising approach to overcome the limitations, we further focus on an in-depth analysis of the development of bone-marrow-on-a-chip that is capable of simulating human immune responses against external stimuli due to the key roles of marrow in immune systems with hematopoietic activities. Owing to the complex interactions between hematopoietic stem cells and marrow microenvironments, precise control of both biochemical and physical niches that are critical in maintenance of hematopoiesis remains a key challenge. Thus, recently developed bone-marrow-on-a-chip models support immunogenicity and immunotoxicity testing in long-term cultivation with repeated antigen stimulation. In this review, we provide an overview of clinical studies that have been carried out on bone marrow transplants in patients with immune-related diseases and future aspects of clinical and pharmaceutical application of bone-marrow-on-a-chip.
Subject(s)
Bone Marrow/drug effects , Drug-Related Side Effects and Adverse Reactions , Lab-On-A-Chip Devices , Toxicity Tests/methods , Xenobiotics/toxicity , Animals , Bone Marrow/immunology , High-Throughput Screening Assays , Humans , Tissue Array Analysis , Tissue Engineering , Toxicity Tests/instrumentationABSTRACT
Despite a wide panel of tissue-engineering models available for vesical reconstruction, the lack of a differentiated urothelium remains their main common limitation. For the first time to our knowledge, an entirely human vesical equivalent, free of exogenous matrix, has been reconstructed using the self-assembly method. Moreover, we tested the contribution of adipose-derived stromal cells, an easily available source of mesenchymal cells featuring many potential advantages, by reconstructing three types of equivalent, named fibroblast vesical equivalent, adipose-derived stromal cell vesical equivalent and hybrid vesical equivalent--the latter containing both adipose-derived stromal cells and fibroblasts. The new substitutes have been compared and characterized for matrix composition and organization, functionality and mechanical behaviour. Although all three vesical equivalents displayed adequate collagen type I and III expression, only two of them, fibroblast vesical equivalent and hybrid vesical equivalent, sustained the development of a differentiated and functional urothelium. The presence of uroplakins Ib, II and III and the tight junction marker ZO-1 was detected and correlated with impermeability. The mechanical resistance of these tissues was sufficient for use by surgeons. We present here in vitro tissue-engineered vesical equivalents, built without the use of any exogenous matrix, able to sustain mechanical stress and to support the formation of a functional urothelium, i.e. able to display a barrier function similar to that of native tissue.
Subject(s)
Adipocytes/cytology , Stromal Cells/cytology , Tissue Engineering/methods , Urinary Bladder/pathology , Animals , Biopsy , Cell Differentiation , Collagen/chemistry , Connective Tissue/pathology , Fibroblasts/cytology , Fibroblasts/metabolism , Humans , Immunohistochemistry , Mesenchymal Stem Cells/cytology , Microscopy, Electron, Scanning , Permeability , Skin/pathology , Stress, Mechanical , Uroplakins/metabolism , Urothelium/metabolism , Urothelium/pathology , Zonula Occludens-1 Protein/metabolismABSTRACT
The aortic heart valve is constantly subjected to pulsatile flow and pressure gradients which, associated with cardiovascular risk factors and abnormal hemodynamics (i.e. altered wall shear stress), can cause stenosis and calcification of the leaflets and result in valve malfunction and impaired circulation. Available options for valve replacement include homograft, allogenic or xenogenic graft as well as the implantation of a mechanical valve. A tissue-engineered heart valve containing living autologous cells would represent an alternative option, particularly for pediatric patients, but still needs to be developed. The present study was designed to demonstrate the feasibility of using a living tissue sheet produced by the self-assembly method, to replace the bovine pericardium currently used for the reconstruction of a stented human heart valve. In this study, human fibroblasts were cultured in the presence of sodium ascorbate to produce tissue sheets. These sheets were superimposed to create a thick construct. Tissue pieces were cut from these constructs and assembled together on a stent, based on techniques used for commercially available replacement valves. Histology and transmission electron microscopy analysis showed that the fibroblasts were embedded in a dense extracellular matrix produced in vitro. The mechanical properties measured were consistent with the fact that the engineered tissue was resistant and could be cut, sutured and assembled on a wire frame typically used in bioprosthetic valve assembly. After a culture period in vitro, the construct was cohesive and did not disrupt or disassemble. The tissue engineered heart valve was stimulated in a pulsatile flow bioreactor and was able to sustain multiple duty cycles. This prototype of a tissue-engineered heart valve containing cells embedded in their own extracellular matrix and sewn on a wire frame has the potential to be strong enough to support physiological stress. The next step will be to test this valve extensively in a bioreactor and at a later date, in a large animal model in order to assess in vivo patency of the graft.
Subject(s)
Aortic Valve/cytology , Aortic Valve/growth & development , Bioprosthesis , Fibroblasts/physiology , Heart Valve Prosthesis , Tissue Engineering/instrumentation , Cells, Cultured , Equipment Failure Analysis , Fibroblasts/cytology , Humans , Prosthesis Design , Tissue Engineering/methodsABSTRACT
Delivery of therapeutic agents via the pulmonary route has gained significant attention over the past few decades because this route of administration offers multiple advantages over traditional routes that include localized action, non-invasive nature and favorable lung-to-plasma ratio. However, assessment of post administration behavior of inhaled pharmaceuticals-such as deposition of particles over the respiratory airways, interaction with the respiratory fluid and movement across the air-blood barrier-is challenging because the lung is a very complex organs that is composed of airways with thousands of bifurcations with variable diameters. Thus, much effort has been put forward to develop models that mimic human lungs and allow evaluation of various pharmaceutical and physiological factors that influence the deposition and absorption profiles of inhaled formulations. In this review, we sought to discuss in vitro, in vivo and ex vivo models that have been extensively used to study the behaviors of airborne particles in the lungs and determine the absorption of drugs after pulmonary administration. We have provided a summary of lung cast models, cascade impactors, noninvasive imaging, intact animals, cell culture and isolated perfused lung models as tools to evaluate the distribution and absorption of inhaled particles. We have also outlined the limitations of currently used models and proposed future studies to enhance the reproducibility of these models.
Subject(s)
Lung/metabolism , Pharmaceutical Preparations/administration & dosage , Absorption , Administration, Inhalation , Animals , Humans , Models, Animal , Models, Biological , Pharmaceutical Preparations/metabolism , PharmacokineticsABSTRACT
The human umbilical cord (UC) has attracted interest as a source of cells for many research applications. UC solid tissues contain four cell types: epithelial, stromal, smooth muscle and endothelial cells. We have developed a unique protocol for the sequential extraction of all four cell types from a single UC, allowing tissue reconstruction using multiple cell types from the same source. By combining perfusion, immersion and explant techniques, all four cell types have been successfully expanded in monolayer cultures. We have also characterised epithelial and Wharton's jelly cells (WJC) by immunolabelling of specific proteins. Epithelial cell yields averaged at 2.3 × 10(5) cells per centimetre UC, and the cells expressed an unusual combination of keratins typical of simple, mucous and stratified epithelia. Stromal cells in the Wharton's jelly expressed desmin, α-smooth muscle actin, elastin, keratins (K12, K16, K18 and K19), vimentin and collagens. Expression patterns in cultured cells resembled those found in situ except for basement membrane components and type III collagen. These stromal cells featured a sustained proliferation rate up to passage 12 after thawing. The mesenchymal stem cell (MSC) character of the WJC was confirmed by their expression of typical MSC surface markers and by adipogenic and osteogenic differentiation assays. To emphasise and demonstrate their potential for regenerative medicine, UC cell types were successfully used to produce human tissue-engineered constructs. Both bilayered stromal/epithelial and vascular substitutes were produced, establishing the versatility and importance of these cells for research and therapeutic applications.
Subject(s)
Tissue Engineering/methods , Umbilical Cord/cytology , Cell Culture Techniques/methods , Cell Differentiation/physiology , Cell Separation/methods , Cells, Cultured , Epithelial Cells/cytology , Human Umbilical Vein Endothelial Cells/cytology , Humans , Mesenchymal Stem Cells/cytology , Stromal Cells/cytology , Umbilical Cord/metabolismABSTRACT
The structural stability of skin substitutes is critical to avoid aesthetic and functional problems after grafting, such as contractures and hypertrophic scars. The present study was designed to assess the production steps having an influence on the contractile behaviour of the tissue-engineered skin made by the self-assembly approach, where keratinocytes are cultured on tissue-engineered dermis comprised of fibroblasts and the endogenous extracellular matrix they organized. Thus, different aspects were investigated, such as the assembly method of the engineered dermis (various sizes and anchoring designs) and the impact of epithelial cell differentiation (culture submerged in the medium or at the air-liquid interface). To evaluate the structural stability at the end of the production, the substitutes were detached from their anchorages and deposited on a soft substrate, and contraction was monitored over 1 week. Collected data were analysed using a mathematical model to characterize contraction. We observed that the presence of a differentiated epidermis significantly reduced the amount of contraction experienced by the engineered tissues, independently of the assembly method used for their production. When the epidermis was terminally differentiated, the average contraction was only 24 ± 4% and most of the contraction occurred within the first 12 h following deposition on the substrate. This is 2.2-fold less compared to when the epidermis was cultured under the submerged condition, or when tissue-engineered dermis was not overlaid with epithelial cells. This study highlights that the maturation at the air-liquid interface is a critical step in the reconstruction of a tissue-engineered skin that possesses high structural stability.
Subject(s)
Air , Skin, Artificial , Tissue Engineering/methods , Adult , Elasticity , Humans , Kinetics , Staining and Labeling , ViscosityABSTRACT
Mesenchymal cells are central to connective tissue homeostasis and are widely used for tissue-engineering applications. Dermal fibroblasts and adipose-derived stromal cells (ASCs) allow successful tissue reconstruction by the self-assembly approach of tissue engineering. This method leads to the production of multilayered tissues, devoid of exogenous biomaterials, that can be used as stromal compartments for skin or vesical reconstruction. These tissues are formed by combining cell sheets, generated through cell stimulation with ascorbic acid, which favours the cell-derived production/organization of matrix components. Since media motion can impact on cell behaviour, we investigated the effect of dynamic culture on mesenchymal cells during tissue reconstruction, using the self-assembly method. Tissues produced using ASCs in the presence of a wave-like movement were nearly twice thicker than under standard conditions, while no difference was observed for tissues produced from dermal fibroblasts. The increased matrix deposition was not correlated with an increased proliferation of ASCs, or by higher transcript levels of fibronectin or collagens I and III. A 30% increase of type V collagen mRNA was observed. Interestingly, tissues engineered from dermal fibroblasts featured a four-fold higher level of MMP-1 transcripts under dynamic conditions. Mechanical properties were similar for tissues reconstructed using dynamic or static conditions. Finally, cell sheets produced using ASCs under dynamic conditions could readily be manipulated, resulting in a 2 week reduction of the production time (from 5 to 3 weeks). Our results describe a distinctive property of ASCs' response to media motion, indicating that their culture under dynamic conditions leads to optimized tissue engineering.
Subject(s)
Adipose Tissue/cytology , Cell Culture Techniques/methods , Connective Tissue/physiology , Fibroblasts/cytology , Tissue Engineering/methods , Adult , Cell Proliferation , Connective Tissue/ultrastructure , DNA/metabolism , Extracellular Matrix/genetics , Extracellular Matrix/metabolism , Extracellular Matrix/ultrastructure , Female , Humans , Kinetics , Reverse Transcriptase Polymerase Chain Reaction , Stromal Cells/cytology , Tensile StrengthABSTRACT
RATIONALE: Prosthetic heart valves designed to be implanted percutaneously must be loaded within delivery catheters whose diameter can be as low as 18 F (6 mm). This mandatory crimping of the devices may result in deleterious damages to the tissues used for valve manufacturing. As bovine and porcine pericardial tissue are currently given preference because of their excellent availability and traceability, a preliminary comparative study was undertaken to highlight their potential advantages. MATERIALS AND METHODS: Bovine and pericardium patches were compared morphologically (light microscopy, scanning electron microscopy and transmission electron microscopy). The acute thrombogenicity of both materials was measured in term of platelet uptake and observed by scanning electron microscopy, porcine intact and injured arteries being used as controls. The pericardium specimens were also subjected to uniaxial tensile tests to compare their respective mechanical characteristics. RESULTS: Both pericardiums showed a layered architecture of collagen bundles presenting some interstitial cells. They displayed wavy crimps typical of an unloaded collagenous tissue. The collagen bundles were not bound together and the fibrils were parallel with characteristic periodicity patterns of cross striations. The mesothelial cells found in vivo on the serous surface were no longer present due to tissue processing, but the adjacent structure was far more compacted when compared to the fibrous side. The fibrinocollagenous surfaces were found to be more thrombogenic for both bovine and porcine tissues and the serous side of the porcine pericardium retained more platelets when compared to the bovine samples, making the acute thrombogenicity more important in the porcine pericardium. CONCLUSION: Both bovine and porcine pericardium used in cardiovascular implantology can be selected to manufacture percutaneous heart valves. The selection of one pericardium preferably to the other should deserve additional testing regarding the innocuousness of crimping when loaded in delivery catheters and the long-term durability after percutaneous deployment.
Subject(s)
Heart Valve Prosthesis , Pericardium/anatomy & histology , Animals , Cattle , Microscopy, Electron, Scanning , Microscopy, Electron, Transmission , SwineABSTRACT
Only a few engineered tissues-skin, cartilage, bladder-have achieved clinical success, and biomaterials designed to replace more complex organs are still far from commercial availability. This gap exists in part because biomaterials lack a vascular network to transfer the oxygen and nutrients necessary for survival and integration after transplantation. Thus, generation of a functional vasculature is essential to the clinical success of engineered tissue constructs and remains a key challenge for regenerative medicine. In this Perspective, we discuss recent advances in vascularization of biomaterials through the use of biochemical modification, exogenous cells, or microengineering technology.
Subject(s)
Biocompatible Materials/chemistry , Regenerative Medicine/methods , Tissue Engineering/methods , Animals , Blood Vessels/pathology , Humans , Mice , Neovascularization, Physiologic , Tissue ScaffoldsABSTRACT
The self-assembly approach is based on the capability of mesenchymal cells to secrete and organize their own extracellular matrix (ECM). This tissue engineering method allows for the fabrication of autologous living tissues, such as tissue-engineered blood vessels (TEBV) and skin. However, the secretion of ECM by smooth muscle cells (SMCs), required to produce the vascular media, may represent a long process in vitro. The aim of this work was to reduce the time required to produce a tissue-engineered vascular media (TEVM) and extend the production of TEVM with SMCs from all patients without compromising its mechanical and functional properties. Therefore, we developed a decellularized matrix scaffold (dMS) produced from dermal fibroblasts (DF) or saphenous vein fibroblasts (SVF), in which SMCs were seeded to produce a TEVM. Mechanical and contractile properties of these TEVM (referred to as nTEVM) were compared to standard self-assembled TEVM (sTEVM). This approach reduced the production time from 6 to 4 weeks. Moreover, nTEVM were more resistant to tensile load than sTEVM and their vascular reactivity was also improved. This new fabrication technique allows for the production of a vascular media using SMCs isolated from any patient, regardless of their capacity to synthesize ECM. Moreover, these scaffolds can be stored to be available when needed, in order to accelerate the production of the vascular substitute using autologous vascular cells.