Unraveling electronic origins for boosting thermoelectric performance of p-type (Bi,Sb)2Te3.

P-type Bi2-xSbxTe3 compounds are crucial for thermoelectric applications at room temperature, with Bi0.5Sb1.5Te3 demonstrating superior performance, attributed to its maximum density-of-states effective mass (m*). However, the underlying electronic origin remains obscure, impeding further performance optimization. Herein, we synthesized high-quality Bi2-xSbxTe3 (00 l) films and performed comprehensive angle-resolved photoemission spectroscopy (ARPES) measurements and band structure calculations to shed light on the electronic structures. ARPES results directly evidenced that the band convergence along the [Formula: see text]-[Formula: see text] direction contributes to the maximum m* of Bi0.5Sb1.5Te3. Moreover, strategic manipulation of intrinsic defects optimized the hole density of Bi0.5Sb1.5Te3, allowing the extra valence band along [Formula: see text]-[Formula: see text] to contribute to the electrical transport. The synergy of the above two aspects documented the electronic origins of the Bi0.5Sb1.5Te3's superior performance that resulted in an extraordinary power factor of ~5.5 milliwatts per meter per square kelvin. The study offers valuable guidance for further performance optimization of p-type Bi2-xSbxTe3.

Low-Frequency Bandgap Characterization of a Locally Resonant Pentagonal Phononic Crystal Beam Structure.

This paper proposes a local resonance-type pentagonal phononic crystal beam structure for practical engineering applications to achieve better vibration and noise reduction. The energy band, transmission curve, and displacement field corresponding to the vibration modes of the structure are calculated based on the finite element method and Bloch-Floquet theorem. Furthermore, an analysis is conducted to understand the mechanism behind the generation of bandgaps. The numerical analysis indicates that the pentagonal unit oscillator creates a low-frequency bandgap between 60-70 Hz and 107-130 Hz. Additionally, the pentagonal phononic crystal double-layer beam structure exhibits excellent vibration damping, whereas the single-layer beam has poor vibration damping. The article comparatively analyzes the effects of different parameters on the bandgap range and transmission loss of a pentagonal phononic crystal beam. For instance, increasing the thickness of the lead layer leads to an increase in the width of the bandgap. Similarly, increasing the thickness of the rubber layer, intermediate plate, and total thickness of the phononic crystals results in a bandgap at lower frequencies. By adjusting the parameters, the beam can be optimized for practical engineering purposes.

Topological Electronic Transition Contributing to Improved Thermoelectric Performance in p-Type Mg3Sb2- xBix Solid Solutions.

Topological electronic transition is the very promising strategy for achieving high band degeneracy (NV) and for optimizing thermoelectric performance. Herein, this work verifies in p-type Mg3Sb2- xBix that topological electronic transition could be the key mechanism responsible for elevating the NV of valence band edge from 1 to 6, leading to much improved thermoelectric performance. Through comprehensive spectroscopy characterizations and theoretical calculations of electronic structures, the topological electronic transition from trivial semiconductor is unambiguously demonstrated to topological semimetal of Mg3Sb2- xBix with increasing the Bi content, due to the strong spin-orbit coupling of Bi and the band inversion. The distinct evolution of Fermi surface configuration and the multivalley valence band edge with NV of 6 are discovered in the Bi-rich compositions, while a peculiar two-step band inversion is revealed for the first time in the end compound Mg3Bi2. As a result, the optimal p-type Mg3Sb0.5Bi1.5 simultaneously obtains a positive bandgap and high NV of 6, and thus acquires the largest thermoelectric power factor of 3.54 and 6.93 µW cm-1 K-2 at 300 and 575 K, respectively, outperforming the values in other compositions. This work provides important guidance on improving thermoelectric performance of p-type Mg3Sb2- xBix utilizing the topological electronic transition.

Exploring the Epitaxial Growth Kinetics and Anomalous Hall Effect in Magnetic Topological Insulator MnBi2Te4 Films.

The discovery of MnBi2Te4-based intrinsic magnetic topological insulators has fueled tremendous interest in condensed matter physics, owing to their potential as an ideal platform for exploring the quantum anomalous Hall effect and other magnetism-topology interactions. However, the fabrication of single-phase MnBi2Te4 films remains a common challenge in the research field. Herein, we present an effective and simple approach for fabricating high-quality, near-stoichiometric MnBi2Te4 films by directly matching the growth rates of intermediate Bi2Te3 and MnTe. Through systematic experimental studies and thermodynamic calculations, we demonstrate that binary phases of Bi2Te3 and MnTe are easily formed during film growth, and the reaction of Bi2Te3 + MnTe → MnBi2Te4 represents the rate-limiting step among all possible reaction paths, which could result in the presence of Bi2Te3 and MnTe impurity phases in the grown MnBi2Te4 films. Moreover, Bi2Te3 and MnTe impurities introduce negative and positive anomalous Hall (AH) components, respectively, in the AH signals of MnBi2Te4 films. Our work suggests that further manipulation of growth parameters should be the essential route for fabricating phase-pure MnBi2Te4 films.

Mechanistic study of the effect of potassium ferrate and straw fiber on the enhancement of strength in cement-based solidified municipal sludge.

The high content of organic matter in sludge is the primary reason for the poor solidifying effect and excessive dosage of the cement base. In this study, potassium ferrate and straw fiber are utilized to synergistically enhance the solidifying effect of the cement and elaborate the strength mechanisms. Among them, potassium ferrate was selected to oxidize and crack the structure of organic matter in sludge and consume part of organic matter; straw fiber was used as an adsorption material to absorb some of the organic material and reduce its interference with the cement hydration reaction; the skeleton function of straw fiber in solidified sludge was used to improve the final solidified sludge strength. It is shown that the presence of these two additives significantly improved the cement solidification strength and reduced the moisture content of the solidified body. Moreover, the moisture content and strength followed an obvious linear relationship (adjusted R2 = 0.92), with the strength increasing as the moisture content decreased. After pretreatment with potassium ferrate, the free water content in the dewatered sludge increased by 4.5%, which was conducive to the adequate hydration reaction with cement. The analysis using X-ray diffraction (XRD), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDS), and mercury intrusion porosimetry (MIP) revealed potassium ferrate synergizes with straw fibers to promote the production of hemihydrate gypsum and gismondine. However, hemihydrate gypsum, calcium carbonate, and gismondine resulted in structural swelling, which was confirmed by the microscopic morphology and pore structure analysis. However, the adverse effects due to swelling were offset by the increase in strength brought by the above crystalline substances.

Fungus-Based MnO/Porous Carbon Nanohybrid as Efficient Laccase Mimic for Oxygen Reduction Catalysis and Hydroquinone Detection.

Developing efficient laccase-mimicking nanozymes via a facile and sustainable strategy is intriguing in environmental sensing and fuel cells. In our work, a MnO/porous carbon (MnO/PC) nanohybrid based on fungus was synthesized via a facile carbonization route. The nanohybrid was found to possess excellent laccase-mimicking activity using 2,2'-azinobis (3-ethylbenzthiazoline-6-sulfonic acid) diammonium salt (ABTS) as the substrate. Compared with the natural laccase and reported nanozymes, the MnO/PC nanozyme had much lower Km value. Furthermore, the electrochemical results show that the MnO/PC nanozyme had high electrocatalytic activity toward the oxygen reduction reaction (ORR) when it was modified on the electrode. The hybrid nanozyme could catalyze the four-electron ORR, similar to natural laccase. Moreover, hydroquinone (HQ) induced the reduction of oxABTS and caused the green color to fade, which provided colorimetric detection of HQ. A desirable linear relationship (0-50 µM) and detection limit (0.5 µM) were obtained. Our work opens a simple and sustainable avenue to develop a carbon-metal hybrid nanozyme in environment and energy applications.

A CRISPR/Cas12a-Mediated Dual-Mode Electrochemical Biosensor for Polymerase Chain Reaction-Free Detection of Genetically Modified Soybean.

A clustered regularly interspaced short palindromic repeats (CRISPR)/Cas12a-mediated dual-mode electrochemical biosensor without polymerase chain reaction (PCR) amplification was designed for sensitive and reliable detection of genetically modified soybean SHZD32-1. A functionalized composite bionanomaterial Fe3O4@AuNPs/DNA-Fc&Ru was synthesized as the signal unit, while a characteristic gene fragment of SHZD32-1 was chosen as the target DNA (tDNA). When Cas12a, crRNA, and tDNA were present simultaneously, a ternary complex Cas12a-crRNA-tDNA was formed, and the nonspecific cleavage ability of the CRISPR/Cas12a system toward single-stranded DNA was activated. Thus, the single-stranded DNA-Fc in the signal unit was cleaved, resulting in the decrease in the fast scan voltammetric (FSV) signal from ferrocene (Fc) and the increase in the electrochemiluminescence (ECL) signal from ruthenium complex (Ru) inhibited by Fc. The linear range was 1-107 fmol/L for ECL and 10-108 fmol/L for FSV, and the limit of detection (LOD) was 0.3 fmol/L for ECL and 3 fmol/L for FSV. Accuracy, precision, stability, selectivity, and reliability were all satisfied. In addition, PCR-free detection could be completed in an hour at room temperature without requiring complicated operation and sample processing, showing great potential in the field detection of genetically modified crops.

Population Health Effects of Air Pollution: Fresh Evidence From China Health and Retirement Longitudinal Survey.

The effects of air pollution on population health are currently a hot topic. However, few studies have examined the physical and mental health effects of air pollution jointly in China. Using data from the China Health and Retirement Longitudinal Study (CHARLS) in 2015 and 2018, this study explores how air pollution affects the physical and mental health of middle-aged and elderly residents. The empirical results highlight that air pollution can negatively affect both physical and mental health. In terms of physical health, those exposed to chronic shock are likely to suffer more adverse effects from air pollution than those exposed to acute shock. In terms of mental health, those exposed to depression suffer greater adverse effects than those exposed to episodic memory and mental cognition. Besides, heterogeneity analysis also shows that air pollution affects the mental and physical health of males more than females. Furthermore, the increase in air pollution is expected to result in huge hospitalization costs. Therefore, the Chinese government should formulate differentiated public health policies to reduce the effects of air pollution on the health of middle-aged and elderly residents.

N-Terminal Fused Signal Peptide Prompted Extracellular Production of a Bacillus-Derived Alkaline and Thermo Stable Xylanase in E. coli Through Cell Autolysis.

Xylanases are extensively used as industrial enzymes for its ability of hydrolyzing xylan to oligosaccharides. Here, XynHB, a thermo and alkaline stable xylanase derived from Bacillus pumilus HBP8, was extracellularly produced in E. coli cells through N-terminal-fused signal peptides. We found that the matured XynHB itself could be auto-secreted out of E. coli BL21(DE3) cells at a very low level, and two Sec-pathway signal peptides, PelB and OmpA, and one dual Sec-Tat-pathway signal peptide, FhuD, could effectively prompt its extracellular production up to 12-fold. Our results showed that PelB signal peptide led to the highest extracellular production of XynHB for approximately 54.1 µg/mL, and FhuD-fused XynHB possessed the highest specific activity of 1746.0 U/mg at 70 °C. Meanwhile, our studies also indicated that PelB- and FhuD-fused XynHB might disrupt E. coli cells' periplasm during their secretion process, thus causing cell lysis to facilitate their extracellular production. Moreover, further characterization revealed that the extracellular production of XynHB was not affected by the outer membrane permeability of E. coli cells. Our studies provided an advantageous strategy for the extracellular production of xylanase in E. coli, which may also be used for E. coli autolysis in the future.

A Comprehensive Map of Intron Branchpoints and Lariat RNAs in Plants.

Lariats are formed by excised introns, when the 5' splice site joins with the branchpoint (BP) during splicing. Although lariat RNAs are usually degraded by RNA debranching enzyme 1, recent findings in animals detected many lariat RNAs under physiological conditions. By contrast, the features of BPs and to what extent lariat RNAs accumulate naturally are largely unexplored in plants. Here, we analyzed 948 RNA sequencing data sets to document plant BPs and lariat RNAs on a genome-wide scale. In total, we identified 13,872, 5199, 29,582, and 13,478 BPs in Arabidopsis (Arabidopsis thaliana), tomato (Solanum lycopersicum), rice (Oryza sativa), and maize (Zea mays), respectively. Features of plant BPs are highly similar to those in yeast and human, in that BPs are adenine-preferred and flanked by uracil-enriched sequences. Intriguingly, ∼20% of introns harbor multiple BPs, and BP usage is tissue-specific. Furthermore, 10,580 lariat RNAs accumulate in wild-type Arabidopsis plants, and most of these lariat RNAs originate from longer or retroelement-depleted introns. Moreover, the expression of these lariat RNAs is accompanied by the incidence of back-splicing of parent exons. Collectively, our results provide a comprehensive map of intron BPs and lariat RNAs in four plant species and uncover a link between lariat turnover and splicing.

Anaphase-promoting complex/cyclosome regulates RdDM activity by degrading DMS3 in Arabidopsis.

During RNA-directed DNA methylation (RdDM), the DDR complex, composed of DRD1, DMS3, and RDM1, is responsible for recruiting DNA polymerase V (Pol V) to silence transposable elements (TEs) in plants. However, how the DDR complex is regulated remains unexplored. Here, we show that the anaphase-promoting complex/cyclosome (APC/C) regulates the assembly of the DDR complex by targeting DMS3 for degradation. We found that a substantial set of RdDM loci was commonly de-repressed in apc/c and pol v mutants, and that the defects in RdDM activity resulted from up-regulated DMS3 protein levels, which finally caused reduced Pol V recruitment. DMS3 was ubiquitinated by APC/C for degradation in a D box-dependent manner. Competitive binding assays and gel filtration analyses showed that a proper level of DMS3 is critical for the assembly of the DDR complex. Consistent with the importance of the level of DMS3, overaccumulation of DMS3 caused defective RdDM activity, phenocopying the apc/c and dms3 mutants. Moreover, DMS3 is expressed in a cell cycle-dependent manner. Collectively, these findings provide direct evidence as to how the assembly of the DDR complex is regulated and uncover a safeguarding role of APC/C in the regulation of RdDM activity.

The heterologous expression strategies of antimicrobial peptides in microbial systems.

Antimicrobial peptides (AMPs) consist of molecules acting on the defense systems of numerous organisms toward tumor and multiple pathogens, such as bacteria, fungi, viruses, and parasites. Compared to traditional antibiotics, AMPs are more stable and have lower propensity for developing resistance through functioning in the innate immune system, thus having important applications in the fields of medicine, food and so on. However, despite of their high economic values, the low yield and the cumbersome extraction process in AMPs production are problems that limit their industrial application and scientific research. To conquer these obstacles, optimized heterologous expression technologies were developed that could provide effective ways to increase the yield of AMPs. In this review, the research progress on heterologous expression of AMPs using Escherichia coli, Bacillus subtilis, Pichia pastoris and Saccharomyces cerevisiae as host cells was mainly summarized, which might guide the expression strategies of AMPs in these cells.

From crabshell to chitosan-hydroxyapatite composite material via a biomorphic mineralization synthesis method.

Hydroxyapatite-polymer composite materials, as biological bone tissue materials, have become an important research direction. In this paper, the calcium carbonate from the crabshells was transformed into hydroxyapatite by a hydrothermal process. According to the method that we called Biomorphic Mineralization synthesis, we obtained a novel kind of hydroxyapatite-chitosan composite materials which reserved the natural perfect structure of the original crabshells. Benefited from its fine micro-structure as the crabshells, this kind of materials held a high value of tensile modulus, which is expected to be promising bone tissue engineering applications.