Isomeric Dimer Acceptors for Stable Organic Solar Cells with over 19% Efficiency.

The strategy of isomerization is known for its simple yet effective role in optimizing molecular configuration and enhancing the power conversion efficiency (PCE) of organic solar cells (OSCs). However, the impact of isomerization on the design of dimer acceptors has been rarely investigated, and the relationship between the chemical structure and optoelectronic property remains unclear. In this study, we designed and synthesized two dimer acceptor isomers named D-TPh and D-TN, which differ in the positional arrangement of their end capping groups. Compared to D-TN, D-TPh exhibited enhanced backbone planarity, elevated lowest unoccupied molecular orbital energy level, and more ordered molecular stacking. Consequently, the OSC device based on PM6:D-TPh achieved a PCE of 19.05%, higher than that (PCE = 18.42%) of the device based on PM6:D-TN. Large-area PM6:D-TPh devices (1 cm²) yielded a PCE of 18.0%. More importantly, the extrapolated T80 lifetime of the PM6:D-TPh device is over 2800 h with MPP tracking under continuous one-sun illumination. These results suggest that isomerization strategy is an effective way to optimize the molecular configuration of dimer acceptors for the fabrication of high-efficiency and stable OSCs.

Regulating Electron-Phonon Coupling by Solid Additive for Efficient Organic Solar Cells.

Strong electron-phonon coupling can hinder exciton transport and induce undesirable non-radiative recombination, resulting in a shortened exciton diffusion distance and constrained exciton dissociation in organic solar cells (OSCs). Therefore, suppressing electron-phonon coupling is crucially important for achieve high-performance OSCs. Here, we employ the solid additive to regulating electron-phonon coupling in OSCs. The planar configuration of SA1 confers a significant advantage in suppressing lattice vibrations in the active layers, reducing the scattering of excitons by phonons caused by lattice vibrations. Consequently, a slow but sustained hole transfer process is identified in the SA1-assisted film, indicating an enhancement in hole transfer efficiency. Prolonged exciton diffusion length and exciton lifetime are achieved in the blend film processed with SA1, attributed to a low non-radiative recombination rate and low energetic disorder for charge carrier transport. As a result, a high efficiency of 20% was achieved for ternary device with a remarkable short-circuit current. This work highlights the important role of suppressing electron-phonon coupling in improving the photovoltaic performance of OSCs.

Conjugation-Broken Dimer Acceptors Enable High-Efficiency, Stable, and Flexibility-Robust Organic Solar Cells.

Dimer acceptors in organic solar cells (OSCs) offer distinct advantages, including a well-defined molecular structure and excellent batch-to-batch reproducibility. Their high glass transition temperature (Tg) aids in achieving an optimal kinetic morphology, thereby enhancing device stability. Currently, most of dimer acceptor materials are linked with conjugated units in order to obtain high power conversion efficiencies (PCEs). In this study, different from previous works on conjugation-linked dimer acceptors, a novel series of dimer acceptors are synthesized (named T1, T4, T6, and T12), each linked with different flexible alkyl linkers, and investigated their PCEs, device stability, and flexibility robustness. When blended with PM6, the T6-based device achieves a PCE of 17.09%, comparable to the fully conjugated T0-based device's PCE of 17.12%. The molecular dynamics simulations and density functional theory calculations suggested that flexible conjugation-broken linkers (FCBLs) promote intermolecular electronic couplings, thereby maintaining good electron mobilities of dimer acceptors. Notably, the T6-based device exhibits impressive long-term stability with a T80 lifetime of 1427 h, while in the T0-based device, T80 is only 350 h. The present work has thus established the relationship between the length of flexible alkyl linkers in such dimer acceptors and the performance and stability of OSCs, which is important to further designing new materials for the fabrication of efficient and stable OSCs.

Facile, Versatile and Stepwise Synthesis of High-Performance Oligomer Acceptors for Stable Organic Solar Cells.

Oligomer acceptors have recently emerged as promising photovoltaic materials for achieving high power conversion efficiency (PCE) and long-term stability in organic solar cells (OSCs). However, the limited availability of diverse acceptors, resulting from the sole synthetic approach, has hindered their potential for future industrialization. In this study, we present a facile and effective stepwise approach that utilizes two consecutive Stille coupling reactions for the synthesis of oligomer acceptors. To demonstrate the feasibility of the novel approach, we successfully synthesize a trimer acceptor, Tri-Y6-OD, and further systematically investigate the impact of oligomerization on device performance and stability. The results reveal that this approach has significant advantages compared to the conventional method, including reduced formation of unwanted by-products and lower difficulties in purification. Remarkably, the OSC based on PM6 : Tri-Y6-OD achieves an impressive PCE of 18.03 % and maintains 80 % of the initial PCE (T80 ) for 1523 h under illumination, surpassing the performance of the corresponding small molecule acceptor Y6-OD-based device. Furthermore, the versatility of the synthetic strategy in obtaining diverse acceptors is further demonstrated. Overall, our findings provide a facile, versatile and stepwise way for synthesizing oligomer acceptors, thereby facilitating the development of stable and efficient OSCs.

Over 18% Efficiency of All-Polymer Solar Cells with Long-Term Stability Enabled by Y6 as a Solid Additive.

Morphology control greatly influences the power conversion efficiency (PCE) and long-term stability of all-polymer solar cells (all-PSCs); however, it remains challenging owing to their complex crystallization behavior. Herein, a small amount of Y6 (2 wt%) is introduced as a solid additive into a PM6:PY-DT blend. Y6 remained inside the active layer and interacted with PY-DT to form a well-mixed phase. Increased molecular packing, enlarged phase separation size, and decreased trap density are observed for the Y6-processed PM6:PY-DT blend. The corresponding devices showed simultaneously improved short-circuit current and fill factor, achieving a high PCE of over 18% and excellent long-term stability, with a T80 lifetime of 1180 h and an extrapolated T70 lifetime of 9185 h at maximum power point tracking (MPP) conditions under continuous one-sun illumination. This Y6-assisted strategy is successfully applied to other all-polymer blends, demonstrating its universality for all-PSCs. This work paves a new way for the fabrication of all-PSCs with high efficiency and superior long-term stability.