Coherence in Polycrystalline Thin Films of Twisted Molecular Crystals.

Helicoidal crystallites in rhythmically banded spherulites manifest spectacular optical patterns in small molecules and polymers. It is shown that concentric optical bands indicating crystallographic orientations typically lose coherence (in-phase twisting) with growth from the center of nucleation. Here, coherence is shown to increase as the twist period decreases for seven molecular crystals grown from the melt. This dependence was correlated to crystallite fiber thickness and length, as well as crystallite branching frequency, a parameter that was extracted from scanning electron micrographs, and supported by numerical simulations. Hole mobilities for 2,5-didodecyl-3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione (DPP-C12) measured by using organic field-effect transistors demonstrated that more incoherent boundaries between optical bands in spherulites lead to higher charge transport for films with the same twist period. This was rationalized by combining our growth model with electrodynamic simulations. This work illustrates the emergence of complexity in crystallization processes (spherulite formation) that arises in the extra variable of helicoidal radial twisting. The details of the patterns analyzed here link the added complexity in crystal growth to the electronic and optical properties of the thin films.

Memory Effect by Melt Crystallization Observed in Polymorphs of a Benzothieno-Benzothiophene Derivative.

This work provides a comprehensive illustration of a crystalline melt memory effect recorded for three solvates of the 2,7-bis(2-(2-methoxyethoxy)ethoxy)benzo[b]benzo[4,5] thieno[2,3-d]thiophene (OEG-BTBT) molecule with dichloromethane (DCM) molecules. Combined optical microscopy and X-ray diffraction measurements at different temperatures are used to get an overview of the structural and morphological properties like melting points, isotropic transition temperatures, induction times, and crystallization kinetics of the three forms. An outstanding observation is made upon annealing the three polymorphs at temperatures well above their respective melting points as well as above the optical clearance temperature. After cooling back to room temperature, recrystallization results in the formation of the initial phase present before the annealing process. This melt memory effect is observed for all three solvates. These observations can be correlated to the strong interaction between the DCM molecules and the oligoethylene glycol side chains, even in the molten state. This conclusion rationalizes the experimental observation made upon solvent vapor annealing of the crystalline sample with DCM, which unambiguously transformed the system into a disordered state.

Polymorph screening at surfaces of a benzothienobenzothiophene derivative: discovering new solvate forms.

The discovery of new polymorphs opens up unique applications for molecular materials since their physical properties are predominantly influenced by the crystal structure type. The deposition of molecules at surfaces offers great potential in the variation of the crystallization conditions, thereby allowing access to unknown polymorphs. With our surface crystallization approach, four new phases are found for an oligoethylene glycol-benzothienobenzothiophene molecule, and none of these phases could be identified via classical polymorph screening. The corresponding crystal lattices of three of the new phases were obtained via X-ray diffraction (XRD). Based on the volumetric considerations together with X-ray fluorescence and Raman spectroscopy data, the phases are identified as solvates containing one, two or three solvent molecules per molecule. The strong interaction of dichloromethane with the oligoethylene glycol side chains of the molecules may be responsible for the formation of the solvates. Temperature-dependent XRD reveals the low thermal stability of the new phases, contrary to the thermodynamically stable bulk form. Nevertheless, the four solvates are stable under ambient conditions for at least two years. This work illustrates that defined crystallization at surfaces enables access to multiple solvates of a given material through precise and controlled variations in the crystallization kinetics.

Exploring the effects of graphene and temperature in reducing electron beam damage: A TEM and electron diffraction-based quantitative study on Lead Phthalocyanine (PbPc) crystals.

High-resolution transmission electron microscopy (TEM) of organic crystals, such as Lead Phthalocyanine (PbPc), is very challenging since these materials are prone to electron beam damage leading to the breakdown of the crystal structure during investigation. Quantification of the damage is imperative to enable high-resolution imaging of PbPc crystals with minimum structural changes. In this work, we performed a detailed electron diffraction study to quantitatively measure degradation of PbPc crystals upon electron beam irradiation. Our study is based on the quantification of the fading intensity of the spots in the electron diffraction patterns. At various incident dose rates (e/Å2/s) and acceleration voltages, we experimentally extracted the decay rate (1/s), which directly correlates with the rate of beam damage. In this manner, a value for the critical dose (e/Å2) could be determined, which can be used as a measure to quantify beam damage. Using the same methodology, we explored the influence of cryogenic temperatures, graphene TEM substrates, and graphene encapsulation in prolonging the lifetime of the PbPc crystal structure during TEM investigation. The knowledge obtained by diffraction experiments is then translated to real space high-resolution TEM imaging of PbPc.

Charge Transport in Twisted Organic Semiconductor Crystals of Modulated Pitch.

Many molecular crystals (approximately one third) grow as twisted, helicoidal ribbons from the melt, and this preponderance is even higher in restricted classes of materials, for instance, charge-transfer complexes. Previously, twisted crystallites of such complexes present an increase in carrier mobilities. Here, the effect of twisting on charge mobility is better analyzed for a monocomponent organic semiconductor, 2,5-bis(3-dodecyl-2-thienyl)-thiazolo[5,4-d]thiazole (BDT), that forms twisted crystals with varied helicoidal pitches and makes possible a correlation of twist strength with carrier mobility. Films are analyzed by X-ray scattering and Mueller matrix polarimetry to characterize the microscale organization of the polycrystalline ensembles. Carrier mobilities of organic field-effect transistors are five times higher when the crystals are grown with the smallest pitches (most twisted), compared to those with the largest pitches, along the fiber elongation direction. A tenfold increase is observed along the perpendicular direction. Simulation of electrical potential based on scanning electron microscopy images and density functional theory suggests that the twisting-enhanced mobility is mainly controlled by the fiber organization in the film. A greater number of tightly packed twisted fibers separated by numerous smaller gaps permit better charge transport over the film surface compared to fewer big crystallites separated by larger gaps.

Memory Effect and Crystallization of (R, S)-2-Chloromandelic Acid Glass.

(R, S)-2-Chloromandelic acid, which can crystallize in racemic crystals (forms α and ß) or a conglomerate (form γ), has been studied for its glass-forming behavior. Below the glass transition temperature, samples of the title compound crack into pieces. Correlation plots of DSC results have been used to investigate what determines the cracking and its occurrence temperature. We found that the latter is influenced by the polymorph from which the melt state has been obtained, showing that a certain memory of the previous crystalline phase persists in the undercooled melt. Moreover, this residual structure could be eliminated by elongating the annealing period or increasing the annealing temperature. Investigation using broadband dielectric spectroscopy confirmed such a memory effect. Finally, we studied the role of cracking in the control of the crystallization. In contrast with previous literature on other glass-forming molecular systems, we verified that the crystallization upon reheating is not impacted by the occurrence of cracks in the glassy state. This observation challenges the current views on polymorphic crystallization from organic glasses.

Polymorphism of terthio-phene with surface confinement.

The origin of unknown polymorphic phases within thin films is still not well understood. This work reports on crystals of the molecule terthio-phene which were grown by thermal gradient crystallization using glass-plate substrates. The crystalline domains displayed a plate-like morphology with an extended lateral size of about 100 µm, but a thickness of only a few µm. Specular X-ray diffraction patterns confirmed the presence of a new polymorph of terthio-phene. Crystal structure solution from a single crystal peeled from the film revealed a structure with an extremely large unit-cell volume containing 42 independent molecules. In contrast to the previously determined crystal structure of terthio-phene, a herringbone packing motif was observed where the terminal ends of the molecules are arranged within one plane (i.e. the molecular packing conforms to the flat substrate surface). This type of molecular packing is obtained by 180° flipped molecules combined with partially random (disordered) occupation. A densely packed interface between terthio-phene crystallites and the substrate surface is obtained, this confirms that the new packing motif has adapted to the flat substrate surface.

Substrate-Induced Phase of a Benzothiophene Derivative Detected by Mid-Infrared and Lattice Phonon Raman Spectroscopy.

The presence of a substrate-induced polymorph of 2,7-dioctyloxy[1]benzothieno[3,2-b]benzothiophene is probed in microscopic crystals and in thin films. Two experimental techniques are used: lattice phonon Raman and IR spectroscopy. The bulk crystal and substrate-induced phase have an entirely different molecular packing, and therefore, their Raman spectra are characteristic fingerprints of the respective polymorphs. These spectra can be unambiguously assigned to the individual polymorphs. Drop-cast and spin-coated thin films on solid substrates are investigated in the as-prepared state and after solvent-vapor annealing. Because Raman spectroscopy is less sensitive with decreasing film thickness, IR spectroscopy is shown to be a more feasible tool for phase detection. The surface-induced phase is mainly present in the as-prepared thin films, whereas the bulk phase is present after solvent-vapor annealing. This result suggests that the surface-induced phase is a metastable polymorph.

Investigation of the Qx -Qy Equilibrium in a Metal-Free Phthalocyanine.

Phthalocyanines (Pcs) have attracted a lot of interest as small molecules for organic electronics. However, some excited-state properties of metal-free phthalocyanines, as for example, the dynamics of the transition between the nondegenerate Qx and Qy states in a metal-free phthalocyanine, have not been fully established. This effect results in a blue-shifted shoulder with low intensity in the Pc fluorescence spectrum. This shoulder was suggested to be related to emission from the more energetic Qy state. By using ultrafast femtosecond transient absorption, we have found a clear equilibrium between the Qx and Qy state of metal-free phthalocyanines in solution.

Polymorphism of dioctyl-terthiophene within thin films: The role of the first monolayer.

The origins of specific polymorphic phases within thin films are still not well understood. The polymorphism of the molecule dioctyl-terthiophene is investigated during the presence of a silicon-oxide surface during the crystallisation process. It is found that a monolayer of molecules forms two-dimensional crystals on the surface. In the case of thicker films crystalline islands are formed, a comparison of the three polymorphic phases observed within thin films and the thermodynamically more stable single crystal phases reveals distinct differences which can be related to an adaption of the molecular packing with the flat surface of the substrate.

Dynamics of monolayer-island transitions in 2,7-dioctyl-benzothienobenzthiophene thin films.

The order in molecular monolayers is a crucial aspect for their technological application. However, the preparation of defined monolayers by spin-coating is a challenge, since the involved processes are far from thermodynamic equilibrium. In the work reported herein, the dynamic formation of dioctyl-benzothienobenzothiophene monolayers is explored as a function of temperature by using X-ray scattering techniques and atomic force microscopy. Starting with a disordered monolayer after the spin-coating process, post-deposition self-reassembly at room temperature transforms the initially amorphous layer into a well-ordered bilayer structure with a molecular herringbone packing, whereas at elevated temperature the formation of crystalline islands occurs. At the temperature of the liquid-crystalline crystal-smectic transition, rewetting of the surface follows resulting in a complete homogeneous monolayer. By subsequent controlled cooling to room temperature, cooling-rate-dependent kinetics is observed; at rapid cooling, a stable monolayer is preserved at room temperature, whereas slow cooling causes bilayer structures. Increasing the understanding and control of monolayer formation is of high relevance for achieving ordered functional monolayers with defined two-dimensional packing, for future applications in the field of organic electronics.

Synthesis and characterization of isomerically pure anti- and syn-anthradiindole derivatives.

Synthesis, isolation, and characterization of isomerically pure syn- and anti-anthradiindole (ADI) derivatives are described. The anti- and syn-ADI structures are demonstrated by (13)C NMR spectroscopy and by single-crystal X-ray diffraction. The spectroscopic and electrochemical properties as well as the stability of these newly synthesized π-conjugated systems are evaluated and supported by quantum-chemical calculations.

Synthesis of isomerically pure anti-anthradithiophene derivatives.

The regiospecific total synthesis and characterization of anti-isomers of 2,8-dialkylanthradithiophenes are described. The "anti" structure of the ADT derivatives is demonstrated by (13)C NMR as well as single crystal X-ray diffraction.

Dimers of anthrathiophene and anthradithiophene derivatives: synthesis and characterization.

Synthesis, isolation, and characterization of derivatives of an anthrathiophene dimer (TOTBAT) and of anthradithiophene oligomers (ADTO), possessing octylthiophene units on their backbone, are described. These semiconductors are prepared through oxidative copper(II) chloride coupling. The spectroscopic properties and stability of these newly synthesized semiconductors were evaluated and supported by quantum-chemical calculations.

High-temperature ferromagnetism of a discotic liquid crystal dilutely intercalated with iron(III) phthalocyanine.

Room-temperature ferromagnetism of an organic discotic liquid crystalline compound (DLC) is achieved by intercalation at low levels with paramagnetic iron(III) phthalocyanine (see figure). These ferromagnetic DLCs are very similar to the so-called dilute magnetic semiconductors of inorganic nature. It is expected that this novel approach will open up a new way of preparing the high-temperature organic ferromagnetic compounds needed for molecular spintronics.

Synthesis of mesogenic phthalocyanine-C60 donor-acceptor dyads designed for molecular heterojunction photovoltaic devices.

A series of phthalocyanine-C(60) dyads 2a-d was synthesized. Key steps in their synthesis are preparation of the low symmetry phthalocyanine intermediate by the statistical condensation of two phthalonitriles, and the final esterification of the fullerene derivative bearing a free COOH group. Structural characterization of the molecules in solution was performed by NMR spectroscopy, UV-vis spectroscopy and cyclic voltammetry. Preliminary studies suggest formation of liquid crystalline (LC) mesophases for some of the prepared dyads. To the best of our knowledge, this is the first example of LC phthalocyanine-C(60) dyads.

Discotic liquid crystals: a new generation of organic semiconductors.

Discotic (disc-like) molecules typically comprising a rigid aromatic core and flexible peripheral chains have been attracting growing interest because of their fundamental importance as model systems for the study of charge and energy transport and due to the possibilities of their application in organic electronic devices. This critical review covers various aspects of recent research on discotic liquid crystals, in particular, molecular design concepts, supramolecular structure, processing into ordered thin films and fabrication of electronic devices. The chemical structure of the conjugated core of discotic molecules governs, to a large extent, their intramolecular electronic properties. Variation of the peripheral flexible chains and of the aromatic core is decisive for the tuning of self-assembly in solution and in bulk. Supramolecular organization of discotic molecules can be effectively controlled by the choice of the processing methods. In particular, approaches to obtain suitable macroscopic orientations of columnar superstructures on surfaces, that is, planar uniaxial or homeotropic alignment, are discussed together with appropriate processing techniques. Finally, an overview of charge transport in discotic materials and their application in optoelectronic devices is given.

Effect of interfaces on the alignment of a discotic liquid-crystalline phthalocyanine.

This paper deals with the influence of the nature and number of solid interfaces on the alignment of the columns in a semiconducting discotic liquid crystal. The solid substrates have been characterized in terms of their roughness and surface energy. The alignment of the discotic liquid crystal columns on these substrates has been determined by optical microscopy under crossed polarizers and by tapping-mode atomic force microscopy. The nature of the substrates has negligible influence on the alignment. The key parameter is the confinement imposed to the film. These surprising observations are explained by the antagonist alignment role of gas and solid interfaces.

Highly fluorescent crystalline and liquid crystalline columnar phases of pyrene-based structures.

A concept for highly ordered solid-state structures with bright fluorescence is proposed: liquid crystals based on tetraethynylpyrene chromophores, where the rigid core is functionalized with flexible, promesogenic alkoxy chains. The synthesis of this novel material is presented. The thermotropic properties are studied by means of differential scanning calorimetry (DSC), cross-polarized optical microscopy (POM), and X-ray diffraction. The mesogen possesses an enantiotropic Col(h) phase over a large temperature range before clearing. The material is highly fluorescent in solution and, most remarkably, in the condensed state, with a broad, strongly red shifted emission. Fluorescence quantum yields (Phi(F)) have been determined to be 70% in dichloromethane solution and 62% in the solid state. Concentration- and temperature-dependent absorption and emission studies as well as quantum-chemical calculations on isolated molecules and dimers are used to clarify the type of intermolecular interactions present as well as their influence on the fluorescence quantum yield and spectral properties of the material. The high luminescence efficiency in the solid state is ascribed to rotated chromophores, leading to an optically allowed lowest optical transition.